The effects of radio frequency(RF)atmospheric pressure(AP)He/H_(2)plasma and thermal treatment on the hydrogenation of TiO_(2)thin films were investigated and compared in this work.The color of the original TiO_(2)fil...The effects of radio frequency(RF)atmospheric pressure(AP)He/H_(2)plasma and thermal treatment on the hydrogenation of TiO_(2)thin films were investigated and compared in this work.The color of the original TiO_(2)film changes from white to black after being hydrogenated in He/H_(2)plasma at160 W(gas temperature~381℃)within 5 min,while the color of the thermally treated TiO_(2)film did not change significantly even in pure H_(2)or He/H_(2)atmosphere with higher temperature(470℃)and longer time(30 min).This indicated that a more effective hydrogenation reaction happened through RF AP He/H_(2)plasma treatment than through pure H_(2)or He/H_(2)thermal treatment.The color change of TiO_(2)film was measured based on the Commission Internationale d’Eclairage L*a*b*color space system.Hydrogenated TiO_(2)film displayed improved visible light absorption with increased plasma power.The morphology of the cauliflower-like nanoparticles of the TiO_(2)film surface remained unchanged after plasma processing.X-ray photoelectron spectroscopy results showed that the contents of Ti3+species and Ti-OH bonds in the plasma-hydrogenated black TiO_(2)increased compared with those in the thermally treated TiO_(2).X-ray diffraction(XRD)patterns and Raman spectra indicated that plasma would destroy the crystal structure of the TiO_(2)surface layer,while thermal annealing would increase the overall crystallinity.The different trends of XRD and Raman spectra results suggested that plasma modification on the TiO_(2)surface layer is more drastic than on its inner layer,which was also consistent with transmission electron microscopy results.Optical emission spectra results suggest that numerous active species were generated during RF AP He/H_(2)plasma processing,while there were no peaks detected from thermal processing.A possible mechanism for the TiO_(2)hydrogenation process by plasma has been proposed.Numerous active species were generated in the bulk plasma region,accelerated in the sheath region,and bumped toward the TiO_(2)film,which will react with the TiO_(2)surface to form OVs and disordered layers.This leads to the tailoring of the band gap of black TiO_(2)and causes its light absorption to extend into the visible region.展开更多
Reactions between CH_4 and CO_2 under the action of continuous microwave discharge at atmospheric pressure were studied in a special homemade reactor. The main products were CO and H2, while acetylene and ethylene wer...Reactions between CH_4 and CO_2 under the action of continuous microwave discharge at atmospheric pressure were studied in a special homemade reactor. The main products were CO and H2, while acetylene and ethylene were also found in the products. Experimental results show that conversions of CH4 and CO2 could be higher than 90% without the presence of any catalyst. Effects of CO2/CH4 molar ratio and total flow rate of the feed gas on the reaction were also investigated.展开更多
Geological storage of acid gas has been identified as a promising approach to reduce atmospheric carbon dioxide(CO_(2)),hydrogen sulfide(H_(2)S)and alleviate public concern resulting from the sour gas production.A goo...Geological storage of acid gas has been identified as a promising approach to reduce atmospheric carbon dioxide(CO_(2)),hydrogen sulfide(H_(2)S)and alleviate public concern resulting from the sour gas production.A good understanding of the relative permeability and capillary pressure characteristics is crucial to predict the process of acid gas injection and migration.The prediction of injection and redistribution of acid gas is important to determine storage capacity,formation pressure,plume extent,shape,and leakage potential.Herein,the existing experimental data and theoretical models were reviewed to gain a better understanding of the issue how the H_(2)S content affects gas density,gas viscosity,interfacial tension,wettability,relative permeability and capillary pressure characteristics of acid gas/brine/rock systems.The densities and viscosities of the acid gas with different H_(2)S mole fractions are both temperature-and pressure-dependent,which vary among the gas,liquid and supercritical phases.Water/acid gas interfacial tension decreases strongly with increasing H_(2)S content.For mica and clean quartz,water contact angle increases with increasing H_(2)S mole fraction.In particular,wettability reversal of mica to a H_(2)S-wet behavior occurs in the presence of dense H_(2)S.The capillary pressure increases with decreasing contact angle.At a given saturation,the relative permeability of a fluid is higher when the fluid is nonwetting.The capillary pressure decreases with decreasing interfacial tension at a given saturation.However,the existing datasets do not show a consistent link between capillary number and relative permeability.The capillary pressure decreases with increasing H_(2)S mole fraction.However,there is no consensus on the effect of the H_(2)S content on the relative permeability curves.This may be due to the limited availability of the relative permeability and capillary pressure data for acid gas/brine/rock systems;thus,more experimental measurements are required.展开更多
Cloud top pressure(CTP)is one of the critical cloud properties that significantly affects the radiative effect of clouds.Multi-angle polarized sensors can employ polarized bands(490 nm)or O_(2)A-bands(763 and 765 nm)t...Cloud top pressure(CTP)is one of the critical cloud properties that significantly affects the radiative effect of clouds.Multi-angle polarized sensors can employ polarized bands(490 nm)or O_(2)A-bands(763 and 765 nm)to retrieve the CTP.However,the CTP retrieved by the two methods shows inconsistent results in certain cases,and large uncertainties in low and thin cloud retrievals,which may lead to challenges in subsequent applications.This study proposes a synergistic algorithm that considers both O_(2)A-bands and polarized bands using a random forest(RF)model.LiDAR CTP data are used as the true values and the polarized and non-polarized measurements are concatenated to train the RF model to determine CTP.Additionally,through analysis,we proposed that the polarized signal becomes saturated as the cloud optical thickness(COT)increases,necessitating a particular treatment for cases where COT<10 to improve the algorithm's stability.The synergistic method was then applied to the directional polarized camera(DPC)and Polarized and Directionality of the Earth’s Reflectance(POLDER)measurements for evaluation,and the resulting retrieval accuracy of the POLDER-based measurements(RMSEPOLDER=205.176 hPa,RMSEDPC=171.141 hPa,R^(2)POLDER=0.636,R^(2)DPC=0.663,respectively)were higher than that of the MODIS and POLDER Rayleigh pressure measurements.The synergistic algorithm also showed good performance with the application of DPC data.This algorithm is expected to provide data support for atmosphere-related fields as an atmospheric remote sensing algorithm within the Cloud Application for Remote Sensing,Atmospheric Radiation,and Updating Energy(CARE)platform.展开更多
The technique of atmospheric pressure plasma is of value in textile industry.In this paper,argon(Ar)and argon/oxygen(Ar/O2)atmospheric pressure plasma were used to treat wool and ramie fibers.The structures and proper...The technique of atmospheric pressure plasma is of value in textile industry.In this paper,argon(Ar)and argon/oxygen(Ar/O2)atmospheric pressure plasma were used to treat wool and ramie fibers.The structures and properties of treated fibers were investigated by means of SEM,XPS,single fiber tensile tester and so on.The results proved that the effects of plasma treatments depended on structural characteristics of fibers to a great extent,besides conditions of plasma treatment.By atmospheric pressure plasma treatment,wool fiber had significant changes in morphology structure,surface chemical component,mechanic properties and dyeability,while ramie fiber just showed a little change.In additional,Ar/O2 plasma showed more effective action than argon.And at the beginning of treatment,plasma brought about remarkable effects,which did not increase with prolonging of treat time.展开更多
基金financially supported by National Natural Science Foundation of China(Nos.12075054,12205040,12175036,11875104)。
文摘The effects of radio frequency(RF)atmospheric pressure(AP)He/H_(2)plasma and thermal treatment on the hydrogenation of TiO_(2)thin films were investigated and compared in this work.The color of the original TiO_(2)film changes from white to black after being hydrogenated in He/H_(2)plasma at160 W(gas temperature~381℃)within 5 min,while the color of the thermally treated TiO_(2)film did not change significantly even in pure H_(2)or He/H_(2)atmosphere with higher temperature(470℃)and longer time(30 min).This indicated that a more effective hydrogenation reaction happened through RF AP He/H_(2)plasma treatment than through pure H_(2)or He/H_(2)thermal treatment.The color change of TiO_(2)film was measured based on the Commission Internationale d’Eclairage L*a*b*color space system.Hydrogenated TiO_(2)film displayed improved visible light absorption with increased plasma power.The morphology of the cauliflower-like nanoparticles of the TiO_(2)film surface remained unchanged after plasma processing.X-ray photoelectron spectroscopy results showed that the contents of Ti3+species and Ti-OH bonds in the plasma-hydrogenated black TiO_(2)increased compared with those in the thermally treated TiO_(2).X-ray diffraction(XRD)patterns and Raman spectra indicated that plasma would destroy the crystal structure of the TiO_(2)surface layer,while thermal annealing would increase the overall crystallinity.The different trends of XRD and Raman spectra results suggested that plasma modification on the TiO_(2)surface layer is more drastic than on its inner layer,which was also consistent with transmission electron microscopy results.Optical emission spectra results suggest that numerous active species were generated during RF AP He/H_(2)plasma processing,while there were no peaks detected from thermal processing.A possible mechanism for the TiO_(2)hydrogenation process by plasma has been proposed.Numerous active species were generated in the bulk plasma region,accelerated in the sheath region,and bumped toward the TiO_(2)film,which will react with the TiO_(2)surface to form OVs and disordered layers.This leads to the tailoring of the band gap of black TiO_(2)and causes its light absorption to extend into the visible region.
文摘Reactions between CH_4 and CO_2 under the action of continuous microwave discharge at atmospheric pressure were studied in a special homemade reactor. The main products were CO and H2, while acetylene and ethylene were also found in the products. Experimental results show that conversions of CH4 and CO2 could be higher than 90% without the presence of any catalyst. Effects of CO2/CH4 molar ratio and total flow rate of the feed gas on the reaction were also investigated.
基金the National Natural Science Foundation of China(Grant Nos.41872210 and 41274111)the Open Research Fund of State Key Laboratory of Geomechanics and Geotechnical Engineering(Grant No.Z018002)。
文摘Geological storage of acid gas has been identified as a promising approach to reduce atmospheric carbon dioxide(CO_(2)),hydrogen sulfide(H_(2)S)and alleviate public concern resulting from the sour gas production.A good understanding of the relative permeability and capillary pressure characteristics is crucial to predict the process of acid gas injection and migration.The prediction of injection and redistribution of acid gas is important to determine storage capacity,formation pressure,plume extent,shape,and leakage potential.Herein,the existing experimental data and theoretical models were reviewed to gain a better understanding of the issue how the H_(2)S content affects gas density,gas viscosity,interfacial tension,wettability,relative permeability and capillary pressure characteristics of acid gas/brine/rock systems.The densities and viscosities of the acid gas with different H_(2)S mole fractions are both temperature-and pressure-dependent,which vary among the gas,liquid and supercritical phases.Water/acid gas interfacial tension decreases strongly with increasing H_(2)S content.For mica and clean quartz,water contact angle increases with increasing H_(2)S mole fraction.In particular,wettability reversal of mica to a H_(2)S-wet behavior occurs in the presence of dense H_(2)S.The capillary pressure increases with decreasing contact angle.At a given saturation,the relative permeability of a fluid is higher when the fluid is nonwetting.The capillary pressure decreases with decreasing interfacial tension at a given saturation.However,the existing datasets do not show a consistent link between capillary number and relative permeability.The capillary pressure decreases with increasing H_(2)S mole fraction.However,there is no consensus on the effect of the H_(2)S content on the relative permeability curves.This may be due to the limited availability of the relative permeability and capillary pressure data for acid gas/brine/rock systems;thus,more experimental measurements are required.
基金the National Natural Science Foundation of China(Grant Nos.42025504,No.41905023)National Natural Science Youth Science Foundation(Grant No.41701406)Youth Innovation Promotion Association of Chinese Academy of Sciences(Grant No.:2021122).
文摘Cloud top pressure(CTP)is one of the critical cloud properties that significantly affects the radiative effect of clouds.Multi-angle polarized sensors can employ polarized bands(490 nm)or O_(2)A-bands(763 and 765 nm)to retrieve the CTP.However,the CTP retrieved by the two methods shows inconsistent results in certain cases,and large uncertainties in low and thin cloud retrievals,which may lead to challenges in subsequent applications.This study proposes a synergistic algorithm that considers both O_(2)A-bands and polarized bands using a random forest(RF)model.LiDAR CTP data are used as the true values and the polarized and non-polarized measurements are concatenated to train the RF model to determine CTP.Additionally,through analysis,we proposed that the polarized signal becomes saturated as the cloud optical thickness(COT)increases,necessitating a particular treatment for cases where COT<10 to improve the algorithm's stability.The synergistic method was then applied to the directional polarized camera(DPC)and Polarized and Directionality of the Earth’s Reflectance(POLDER)measurements for evaluation,and the resulting retrieval accuracy of the POLDER-based measurements(RMSEPOLDER=205.176 hPa,RMSEDPC=171.141 hPa,R^(2)POLDER=0.636,R^(2)DPC=0.663,respectively)were higher than that of the MODIS and POLDER Rayleigh pressure measurements.The synergistic algorithm also showed good performance with the application of DPC data.This algorithm is expected to provide data support for atmosphere-related fields as an atmospheric remote sensing algorithm within the Cloud Application for Remote Sensing,Atmospheric Radiation,and Updating Energy(CARE)platform.
文摘The technique of atmospheric pressure plasma is of value in textile industry.In this paper,argon(Ar)and argon/oxygen(Ar/O2)atmospheric pressure plasma were used to treat wool and ramie fibers.The structures and properties of treated fibers were investigated by means of SEM,XPS,single fiber tensile tester and so on.The results proved that the effects of plasma treatments depended on structural characteristics of fibers to a great extent,besides conditions of plasma treatment.By atmospheric pressure plasma treatment,wool fiber had significant changes in morphology structure,surface chemical component,mechanic properties and dyeability,while ramie fiber just showed a little change.In additional,Ar/O2 plasma showed more effective action than argon.And at the beginning of treatment,plasma brought about remarkable effects,which did not increase with prolonging of treat time.
