Dielectric barrier discharge(DBD)plasma excited by a high-frequency alternating-current(AC)power supply is widely employed for the degradation of volatile organic compounds(VOCs).However,the thermal effect generated d...Dielectric barrier discharge(DBD)plasma excited by a high-frequency alternating-current(AC)power supply is widely employed for the degradation of volatile organic compounds(VOCs).However,the thermal effect generated during the discharge process leads to energy waste and low energy utilization efficiency.In this work,an innovative DBD thermally-conducted catalysis(DBD-TCC)system,integrating high-frequency AC-DBD plasma and its generated thermal effects to activate the Co/SBA-15 catalyst,was employed for toluene removal.Specifically,Co/SBA-15 catalysts are closely positioned to the ground electrode of the plasma zone and can be heated and activated by the thermal effect when the voltage exceeds 10 k V.At12.4 k V,the temperature in the catalyst zone reached 261℃ in the DBD-TCC system,resulting in an increase in toluene degradation efficiency of 17%,CO_(2)selectivity of 21.2%,and energy efficiency of 27%,respectively,compared to the DBD system alone.In contrast,the DBD thermally-unconducted catalysis(DBD-TUC)system fails to enhance toluene degradation due to insufficient heat absorption and catalytic activation,highlighting the crucial role of AC-DBD generated heat in the activation of the catalyst.Furthermore,the degradation pathway and mechanism of toluene in the DBD-TCC system were hypothesized.This work is expected to provide an energy-efficient approach for high-frequency AC-DBD plasma removal of VOCs.展开更多
Nitrate from the application of nitrogen-based fertilizers in intensive agriculture is a notorious waste product, though it lacks cost-effective solutions for its removal from potential drinking water resources. Catal...Nitrate from the application of nitrogen-based fertilizers in intensive agriculture is a notorious waste product, though it lacks cost-effective solutions for its removal from potential drinking water resources. Catalytic reduction appears to be a promising technique for converting nitrates to benign nitrogen gas. Mesoporous silica SBA-15 is a frequently used catalyst support that has large surface areas and highly ordered nanopores. In this work, mesoporous silica SBA-15 bimetallic catalysts for nitrate reduction were investigated. The catalyst was optimized for the selection of promoter metal (Sn and Cu), noble metal (Pd and Pt) and loading ratios of these metals at different temperatures and reduction conditions. The catalysts prepared were characterized by FT-IR, N2 physisorption, XRD, SEM, and ICP. All catalysts showed the presence of cylindrical mesoporous channels and uniform pore structures that remained even after metals loading. In the presence of a CO<sub>2</sub> buffer, the catalysts 4Pd-1Cu/SBA-15 and 1Pt-1Cu/SBA-15 reduced at 100?C under H2 and 1Pd-1Cu/SBA-15 reduced at 200°C under H2 demonstrated very high nitrate conversion. Furthermore, the forementioned Pd catalysts had higher N2 selectivity (88% - 87%) compared to Pt catalyst (80%). Nitrate conversion by the 4Pd-1Cu/SBA-15 catalyst was significantly decreased to 81% in the absence of CO<sub>2</sub>.展开更多
Fluid catalytic cracking(FCC)is still a key process in the modern refining industry,in which nickel contamination of the FCC catalyst can significantly increase the dry gas and coke yields and thus seriously affect th...Fluid catalytic cracking(FCC)is still a key process in the modern refining industry,in which nickel contamination of the FCC catalyst can significantly increase the dry gas and coke yields and thus seriously affect the stability of the FCC unit.Therefore,in this work,B_(2)O_(3)-modified SBA-15 molecular sieves(B_(2)O_(3)/SBA-15)with different B_(2)O_(3) contents were prepared,characterized,and further used as matrix component in the preparation of Ni-tolerant FCC catalyst.The characterization results indicated that the B_(2)O_(3)/SBA-15 samples possessed excellent Ni passivation ability and kept the characteristic structure of the parent SBA-15 such as highly ordered mesopores,large surface area,and high pore volume,which enabled the B_(2)O_(3)/SBA-15 sample to greatly improve the Ni tolerance of the prepared FCC catalyst.The heavy oil catalytic cracking tests indicated that,under the same Ni contamination conditions,the dry gas,coke,and heavy oil yields of the FCC catalyst containing B_(2)O_(3)/SBA-15 decreased by 0.92%,1.65%,and 1.26%,respectively,compared with those of conventional FCC catalyst,while the total liquid yield increased by 3.83%.展开更多
A series of Ni/SBA-15 catalysts with Ni contents ranging from 5wt% to 20wt% as well as 10wt%Ni/10wt%CexZr1-xO2/SBA-15 （x=0, 0.5, 1） were prepared. The structures of the catalysts were characterized using XRD, TPR, T...A series of Ni/SBA-15 catalysts with Ni contents ranging from 5wt% to 20wt% as well as 10wt%Ni/10wt%CexZr1-xO2/SBA-15 （x=0, 0.5, 1） were prepared. The structures of the catalysts were characterized using XRD, TPR, TEM and BET techniques. The catalytic activities of the catalysts for steam reforming of methane were evaluated in a continuous flow microreactor. The results indicated that both the Ni/SBA-15 and the Ni/CexZr1-xO2/SBA-15 catalysts had good catalytic activities at at- mospheric pressure. The 10wt%Ni/SBA-15 catalyst exhibited excellent stability at 800 ℃ for time on stream of 740 h. After the reaction, carbon deposits were not formed on the surface of the catalyst. There existed a regular hexagonal mesoporous structure in the Ni/SBA-15 and the Ni/CexZr1-xO2/SBA-15 catalysts. The nickel species and the CexZr1-xO2 component were all confined in the SBA-15 mesopores. The CexZr1-xO2 could promote dispersion of the nickel species in the Ni/CexZr1-xO2/SBA-15 catalysts.展开更多
A series of Ni/SBA-15 catalysts with 5wt% to 15wt% Ni content as well as a series of 12.5%Ni/Cu/SBA-15 catalysts with 1% to 10% copper content were prepared by the impregnation method. The catalytic performance for pa...A series of Ni/SBA-15 catalysts with 5wt% to 15wt% Ni content as well as a series of 12.5%Ni/Cu/SBA-15 catalysts with 1% to 10% copper content were prepared by the impregnation method. The catalytic performance for partial oxidation of methane was investigated in a continuous flow microreactor under atmospheric pressure. The textural and chemical properties of the catalysts were characterized by XRD, TEM, BET and Hz-TPR techniques. The results indicated that the catalysts modified with Cu promoter showed better performance than those without modification. For the 12.5%Ni/2.5%/Cu/SBA-15 catalyst, at 850 ℃ the conversion of CH4 reached 97.9% and the selectivity of CO and H2 reached 98.0% and 96.0%, respectively. In XRD patterns of the Ni/Cu/SBA-15 catalyst with 7.5 to 10% Cu contents there were CuO characteristic peaks beside NiO characteristic peaks. The mesoporous structure of SBA-15 was retained in all of the catalysts. TPR analysis of the catalysts revealed that a strong interaction between Ni, Cu promoter and SBA-15 support may be existed. This interaction enhanced significantly the redox properties of the catalysts resulting in the higher catalytic activity.展开更多
A series of the Pt-Sn/SBA-15 catalysts were prepared and their properties characterized by using X-ray powder diffraction （XRD）, N2 adsorption-desorption, high resolution transmission electron microscope, X-ray phot...A series of the Pt-Sn/SBA-15 catalysts were prepared and their properties characterized by using X-ray powder diffraction （XRD）, N2 adsorption-desorption, high resolution transmission electron microscope, X-ray photoelectron spectroscopy （XPS） and H2-temperature programmed reduction. Their performances in long chain alkane dehydrogenation were evaluated in a fixed-bed microreactor with dodecane as a model alkane. The results indicated that SBA-15 maintained the well-order mesoporous structure during the reaction. The performance of the catalyst was found not dominated by its textural properties, but by the molar ratio of Sn to Pt which governed the degree of Sn reduction. Owing to the highest degree of Sn reduction, 1% （by mass） Pt-1.8% （by mass） Sn/SBA-15 showed the best catalytic activity. At 0.1 MPa and 470℃, the molar ratio of hydrogen to alkane at 4, and liquid hourly space velocity （LHSV） 20 h^-1, the dodecane conversion is 10%, and the dodecene selectivity is about 70%.展开更多
A series of Ni/SBA-15 catalysts with Ni contents ranging from 5 wt% to 15 wt%, as well as another series of 10%Ni/MgO/SBA-15 catalysts, in which the range of the MgO content was from 1 wt% to 7 wt%, were prepared, and...A series of Ni/SBA-15 catalysts with Ni contents ranging from 5 wt% to 15 wt%, as well as another series of 10%Ni/MgO/SBA-15 catalysts, in which the range of the MgO content was from 1 wt% to 7 wt%, were prepared, and their catalytic performances for the reaction of combined steam and carbon dioxide reforming of methane were investigated in a continuous flow microreactor. The structures of the catalysts were characterized using the XRD, H2-TPR and CO2-TPD techniques. The results indicated that the CO selectivity for this reaction was very close to 100%, and the H2/CO ratio of the product gas could be controlled by changing the H2O/CO2 molar ratio of the feed gas. The simultaneous and plentiful existing of steam and CO2 had a significant influence on the catalytic performance of the 10%Ni/SBA-15 catalyst without modification. After reacting at 850 °C for 120 h over this catalyst, the CH4 conversion dropped from 98% to 85%, and the CO2 conversion decreased from 86% to 53%. However, the 10%Ni/3%MgO/SBA-15 catalyst exhibited a much better catalytic performance, and after reacting for 620 h, the CO2 conversion over this catalyst dropped from 92% to around 77%, while the CH4 conversion was not decreased. Oxidation of the Ni0 species as well as carbon deposition during the reaction were the main reasons for the deactivation of the catalyst without modification. On the other hand, modification by the MgO promoter improved the dispersion of the Ni0 species, and enhanced the CO2 adsorption affinity which in turn depressed the occurring of carbon deposition, and thus retarded the deactivation process.展开更多
A series of Ni/SBA-15 catalysts with Ni contents from 7.5 wt% to 15 wt% were prepared by impregnation method.The effect of O2 and H2O on the combined reforming of the simulated biogas to syngas was investigated in a c...A series of Ni/SBA-15 catalysts with Ni contents from 7.5 wt% to 15 wt% were prepared by impregnation method.The effect of O2 and H2O on the combined reforming of the simulated biogas to syngas was investigated in a continuous flow fixed-bed micro-reactor.The stability of the catalyst was tested at 800 ？C.The results indicated that 10wt%Ni/SBA-15 catalyst exhibited the highest catalytic activities for the combined reforming of the simulated biogas to syngas.Under the reaction conditions of the feed gas molar ratios CH4/CO2/O2/H2O = 2/1/0.6/0.6,GHSV = 24000 ml·gcat^-1·h^-1 and the reaction temperature T = 800 ℃,the conversions of CH4 and CO2 were 92.8% and 76.3%,respectively,and the yields of CO and H2 were 99.0% and 82.0%,respectively.The catalytic activities of the catalyst did not decrease obviously after 100 h reaction time on stream.展开更多
The catalytic oxidation of toluene over Ag/SBA‐15synthesized under different pretreatment conditions,including O2at500°C(denoted O500),H2at500°C(H500),and O2at500°C followed by H2at300°C(O500‐H30...The catalytic oxidation of toluene over Ag/SBA‐15synthesized under different pretreatment conditions,including O2at500°C(denoted O500),H2at500°C(H500),and O2at500°C followed by H2at300°C(O500‐H300)was studied.The pretreated samples were investigated by N2physisorption,X‐ray diffraction,and ultraviolet‐visible diffuse reflectance.The pretreatment atmosphere greatly influences the status of the Ag and O species,which in turn significantly impacts the adsorption and catalytic removal of toluene.Ag2O and amorphous Ag particles,as well as a large amount of subsurface oxygen species,are formed on O500,and the subsurface oxygen enhances the interaction between Ag species and toluene,so O500shows good activity at higher temperature.However,its activity at lower temperature is not as high as expected,with a reduced presence of Ag2O and lower adsorption capacity for toluene.H2pretreatment at500°C is conducive to the formation of large Ag particles and yields the largest adsorption capacity for toluene,so H500exhibits the best activity at lower temperatures;however,because of poor interaction between Ag and toluene,its activity at higher temperature is modest.The O500‐H300sample exhibits excellent catalytic activity during the whole reaction process,which can be attributed to the small and highly dispersed Ag nanoparticles as well as the existence of subsurface oxygen.展开更多
SBA-15 supported Mo catalysts （Moy/SBA-15） were prepared by an ultrasonic assisted incipient-wetness impregnation method. The physical and chemical properties of the catalysts were characterized by means of N2-adsor...SBA-15 supported Mo catalysts （Moy/SBA-15） were prepared by an ultrasonic assisted incipient-wetness impregnation method. The physical and chemical properties of the catalysts were characterized by means of N2-adsorption-desorption, XRD, TEM, UV-Vis, Raman, XANES and H2-TPR. The results showed that a trace amount of MoO3 was produced on high Mo content samples. Tum-over frequency （TOF） and product selectivity are dependent on the molybdenum content. Both Mo0.75/SBA-15 and Mo1.75/SBA-15 catalysts give the higher catalytic activity and the selectivity to the total aldehydes for the selective oxidation of C2H6. At the reaction temperature of 625℃, the maximum yield of aldehydes reached 4.2% over Mo0.75/SBA-15 catalyst. The improvement of the activity and selectivity was related with the state of MoOx species.展开更多
A series of Sn‐incorporated SBA‐15materials with high specific surface areas and highly orderedmesoporous structures were synthesized by a facile one‐pot method and used as catalyst supports.A reference sample was ...A series of Sn‐incorporated SBA‐15materials with high specific surface areas and highly orderedmesoporous structures were synthesized by a facile one‐pot method and used as catalyst supports.A reference sample was also prepared using a conventional impregnation method.The catalystswere characterized using various methods,and their activities in propane dehydrogenation wereinvestigated.The incorporation of Sn into the SBA‐15matrix led to strong interactions between Snspecies and the support,and these helped to maintain the oxidation states of Sn species during thereaction.Substitution with Sn changed the interfacial properties of the Pt species and improved thefunction and effect of the Sn promoter.The catalytic activities and stabilities of the Pt catalysts supportedon Sn‐incorporated SBA‐15were better than those of the impregnated sample.However,thecatalytic performance deteriorated when an excessive amount of Sn was introduced and the interactionsamong Pt,Sn species,and the support became weaker.The Pt/0.5Sn‐SBA‐15catalyst gavethe best propene selectivity,i.e.,98.5%,with a corresponding propane conversion of about43.8%.展开更多
The aim of this work was to evaluate the catalytic properties of a Ru promoted Co/SBA-15 catalyst for Fischer-Tropsch synthesis （FTS）. The Ru promoted Co/SBA-15 catalyst was prepared by wet impregnation method and w...The aim of this work was to evaluate the catalytic properties of a Ru promoted Co/SBA-15 catalyst for Fischer-Tropsch synthesis （FTS）. The Ru promoted Co/SBA-15 catalyst was prepared by wet impregnation method and was characterized by X-ray diffraction, X-ray energy dispersion spectrophotometer, N2 adsorption-desorption, temperature-programmed reduction and transmission electron microscopy. The Fischer-Tropsch synthesis using the catalyst was carried out to evaluate the catalyst activity and its effect on FTS product distribution. The synthesis was carried out in a slurry reactor operating at 513 K, 20 atm, CO ： H2 molar ratio of 1 ： 1. X-ray diffraction showed that the calcined cobalt catalyst did not modify the structure of SBA-15, proving that Co was present in the form of Co3O4 in the catalyst. The addition of cobalt in SBA-15 decreased the specific superficial area of the molecular sieve. Fischer-Tropsch synthesis activity and C5＋ hydrocarbon selectivity increased with the addition of Ru. The increases in activity and selectivity were attributed to the increased number of active sites resulting from higher reducibility and the synergetic effect of Ru and Co. Ru/Co/SBA-15 catalysts showed moderate conversion （40%） and high selectivity towards the production of C5＋ （80 wt%）.展开更多
PtSnNa/AlSBA-15 catalysts with different amounts of Sn were prepared for propane dehydrogenation.The catalysts were characterized by XRF,BET,H2 chemisorption,NH3-TPD,H2-TPR,and TPO techniques.Test results indicated th...PtSnNa/AlSBA-15 catalysts with different amounts of Sn were prepared for propane dehydrogenation.The catalysts were characterized by XRF,BET,H2 chemisorption,NH3-TPD,H2-TPR,and TPO techniques.Test results indicated that the presence of tin not only modified the acid function and the interfacial character between metal and support,but also reduced the coke deposition effectively.Among these catalysts investigated thereby,the PtSn(0.7%)Na/AlSBA-15 catalyst had the best catalytic performance in terms of propane conversion and stability.With the continuous addition of Sn,more amounts of Sn0 species appeared,which was unfavorable to the reaction.The PtSn(0.7%)Na/AlSBA-15 catalyst was parametrically characterized in order to obtain necessary information to integrate the process operating conditions.A weight hourly space velocity of 3 h-1,a reaction temperature of 610 ℃ and a H2/C3H8 molar ratio of 0.25 were found to be optimum conditions for achieving a higher dehydrogenation activity of the catalyst.展开更多
Efficiency and recycling of catalysts are important for the lignin hydrogenolysis to obtain phenolic monomers.In this work,a series of highdispersion Ni/AlSBA15 catalysts were prepared by a direct and effective prepar...Efficiency and recycling of catalysts are important for the lignin hydrogenolysis to obtain phenolic monomers.In this work,a series of highdispersion Ni/AlSBA15 catalysts were prepared by a direct and effective preparation method,and then used in the hydrogenolysis of diphenyl ether(DE)and organosolv hydrolyzed lignin(OHL)for phenolic monomers.The universality of asmade catalysts in different solvents and cyclic performance were investigated.Results showed that the addition of ethylene glycol(EG)during the loading process of Ni promoted the dispersion of metal efficiently.High dispersion of Ni species could highly enhance the conversion of DE and the OHL which Ni/AlSBA15(1EG)exhibited the excellent catalytic performance.Decalin was found to be most effective solvent on the conversion of DE(99.16%).84.77%liquefaction ratio and 21.36%monomer yield were achieved,and no obvious char was observed after the depolymerization of OHL in ethanol solvent at 280℃for 4 h over the Ni/AlSBA15(1EG)catalyst.展开更多
A series of B-Ni2P/SBA-15/cord monolithic catalysts were prepared by coating the slurry of the B-Ni2P/SBA-15 precursors on a pretreated cordierite support, and followed by temperature-programmed reduction in a H2 flow...A series of B-Ni2P/SBA-15/cord monolithic catalysts were prepared by coating the slurry of the B-Ni2P/SBA-15 precursors on a pretreated cordierite support, and followed by temperature-programmed reduction in a H2 flow. The samples were characterized by X-ray diffraction （XRD） and N2 adsorption-desorption technique. The catalytic activities for the hydrodesulfurization （HDS） of dibenzothiophene （DBT） were evaluated. The results showed that Ni2P phase was present in all B-Ni2P/SBA-1 5/cord monolithic catalysts. The specific surface areas （SBET） of the B-Ni2P/SBA-15/cord monolithic catalysts was first increased to 167 m2· g-1, and then decreased to 155 m2· g-1 with the increase of boron contents. The catalytic activity also showed the similar trend with the increase of boron contents. The 1.75% （by mass） B-Ni2P/SBA-15/cord monolithic catalysts exhibited the highest DBT conversion of 98.4% at 380 ℃. The cordierite-based monolithic catalysts showed better low temperature sensitivity for HDS of DBT in comparison with the particle catalysts. Moreover, two HDS routes, direct desulfurization （DDS） and hydrogenation （HYD）, proceeded independently over B-Ni2P/SBA-15/cord monolithic catalysts and the main pathway was DDS.展开更多
基金supported by National Natural Science Foundation of China(No.52177130)the Key Projects for Industrial Prospects and Core Technology Research in Suzhou City(No.SYC2022029)。
文摘Dielectric barrier discharge(DBD)plasma excited by a high-frequency alternating-current(AC)power supply is widely employed for the degradation of volatile organic compounds(VOCs).However,the thermal effect generated during the discharge process leads to energy waste and low energy utilization efficiency.In this work,an innovative DBD thermally-conducted catalysis(DBD-TCC)system,integrating high-frequency AC-DBD plasma and its generated thermal effects to activate the Co/SBA-15 catalyst,was employed for toluene removal.Specifically,Co/SBA-15 catalysts are closely positioned to the ground electrode of the plasma zone and can be heated and activated by the thermal effect when the voltage exceeds 10 k V.At12.4 k V,the temperature in the catalyst zone reached 261℃ in the DBD-TCC system,resulting in an increase in toluene degradation efficiency of 17%,CO_(2)selectivity of 21.2%,and energy efficiency of 27%,respectively,compared to the DBD system alone.In contrast,the DBD thermally-unconducted catalysis(DBD-TUC)system fails to enhance toluene degradation due to insufficient heat absorption and catalytic activation,highlighting the crucial role of AC-DBD generated heat in the activation of the catalyst.Furthermore,the degradation pathway and mechanism of toluene in the DBD-TCC system were hypothesized.This work is expected to provide an energy-efficient approach for high-frequency AC-DBD plasma removal of VOCs.
文摘Nitrate from the application of nitrogen-based fertilizers in intensive agriculture is a notorious waste product, though it lacks cost-effective solutions for its removal from potential drinking water resources. Catalytic reduction appears to be a promising technique for converting nitrates to benign nitrogen gas. Mesoporous silica SBA-15 is a frequently used catalyst support that has large surface areas and highly ordered nanopores. In this work, mesoporous silica SBA-15 bimetallic catalysts for nitrate reduction were investigated. The catalyst was optimized for the selection of promoter metal (Sn and Cu), noble metal (Pd and Pt) and loading ratios of these metals at different temperatures and reduction conditions. The catalysts prepared were characterized by FT-IR, N2 physisorption, XRD, SEM, and ICP. All catalysts showed the presence of cylindrical mesoporous channels and uniform pore structures that remained even after metals loading. In the presence of a CO<sub>2</sub> buffer, the catalysts 4Pd-1Cu/SBA-15 and 1Pt-1Cu/SBA-15 reduced at 100?C under H2 and 1Pd-1Cu/SBA-15 reduced at 200°C under H2 demonstrated very high nitrate conversion. Furthermore, the forementioned Pd catalysts had higher N2 selectivity (88% - 87%) compared to Pt catalyst (80%). Nitrate conversion by the 4Pd-1Cu/SBA-15 catalyst was significantly decreased to 81% in the absence of CO<sub>2</sub>.
基金National Natural Science Foundation of China(grant number:21902008)Doctor Research Program of Shandong University of Technology(No.4041/420117).
文摘Fluid catalytic cracking(FCC)is still a key process in the modern refining industry,in which nickel contamination of the FCC catalyst can significantly increase the dry gas and coke yields and thus seriously affect the stability of the FCC unit.Therefore,in this work,B_(2)O_(3)-modified SBA-15 molecular sieves(B_(2)O_(3)/SBA-15)with different B_(2)O_(3) contents were prepared,characterized,and further used as matrix component in the preparation of Ni-tolerant FCC catalyst.The characterization results indicated that the B_(2)O_(3)/SBA-15 samples possessed excellent Ni passivation ability and kept the characteristic structure of the parent SBA-15 such as highly ordered mesopores,large surface area,and high pore volume,which enabled the B_(2)O_(3)/SBA-15 sample to greatly improve the Ni tolerance of the prepared FCC catalyst.The heavy oil catalytic cracking tests indicated that,under the same Ni contamination conditions,the dry gas,coke,and heavy oil yields of the FCC catalyst containing B_(2)O_(3)/SBA-15 decreased by 0.92%,1.65%,and 1.26%,respectively,compared with those of conventional FCC catalyst,while the total liquid yield increased by 3.83%.
基金Financial funds from the Chinese Natural Science Foundation(Project No.20473009)the Beijing Natural Science Foundation(Project No.8062023)+1 种基金the National Basic Research Program of China(Project No.2005CB221405)the National"863"Project of China(No.2006 AA10Z425)are gratefully acknowledged.
文摘A series of Ni/SBA-15 catalysts with Ni contents ranging from 5wt% to 20wt% as well as 10wt%Ni/10wt%CexZr1-xO2/SBA-15 （x=0, 0.5, 1） were prepared. The structures of the catalysts were characterized using XRD, TPR, TEM and BET techniques. The catalytic activities of the catalysts for steam reforming of methane were evaluated in a continuous flow microreactor. The results indicated that both the Ni/SBA-15 and the Ni/CexZr1-xO2/SBA-15 catalysts had good catalytic activities at at- mospheric pressure. The 10wt%Ni/SBA-15 catalyst exhibited excellent stability at 800 ℃ for time on stream of 740 h. After the reaction, carbon deposits were not formed on the surface of the catalyst. There existed a regular hexagonal mesoporous structure in the Ni/SBA-15 and the Ni/CexZr1-xO2/SBA-15 catalysts. The nickel species and the CexZr1-xO2 component were all confined in the SBA-15 mesopores. The CexZr1-xO2 could promote dispersion of the nickel species in the Ni/CexZr1-xO2/SBA-15 catalysts.
基金supported by the National Basic Research Program of China (Project No. 2005CB221405)the National "863" Project of China (No.2006AA10Z425)
文摘A series of Ni/SBA-15 catalysts with 5wt% to 15wt% Ni content as well as a series of 12.5%Ni/Cu/SBA-15 catalysts with 1% to 10% copper content were prepared by the impregnation method. The catalytic performance for partial oxidation of methane was investigated in a continuous flow microreactor under atmospheric pressure. The textural and chemical properties of the catalysts were characterized by XRD, TEM, BET and Hz-TPR techniques. The results indicated that the catalysts modified with Cu promoter showed better performance than those without modification. For the 12.5%Ni/2.5%/Cu/SBA-15 catalyst, at 850 ℃ the conversion of CH4 reached 97.9% and the selectivity of CO and H2 reached 98.0% and 96.0%, respectively. In XRD patterns of the Ni/Cu/SBA-15 catalyst with 7.5 to 10% Cu contents there were CuO characteristic peaks beside NiO characteristic peaks. The mesoporous structure of SBA-15 was retained in all of the catalysts. TPR analysis of the catalysts revealed that a strong interaction between Ni, Cu promoter and SBA-15 support may be existed. This interaction enhanced significantly the redox properties of the catalysts resulting in the higher catalytic activity.
基金Supported by the National Natural Science Foundation of China （20376005）.
文摘A series of the Pt-Sn/SBA-15 catalysts were prepared and their properties characterized by using X-ray powder diffraction （XRD）, N2 adsorption-desorption, high resolution transmission electron microscope, X-ray photoelectron spectroscopy （XPS） and H2-temperature programmed reduction. Their performances in long chain alkane dehydrogenation were evaluated in a fixed-bed microreactor with dodecane as a model alkane. The results indicated that SBA-15 maintained the well-order mesoporous structure during the reaction. The performance of the catalyst was found not dominated by its textural properties, but by the molar ratio of Sn to Pt which governed the degree of Sn reduction. Owing to the highest degree of Sn reduction, 1% （by mass） Pt-1.8% （by mass） Sn/SBA-15 showed the best catalytic activity. At 0.1 MPa and 470℃, the molar ratio of hydrogen to alkane at 4, and liquid hourly space velocity （LHSV） 20 h^-1, the dodecane conversion is 10%, and the dodecene selectivity is about 70%.
基金the National Basic Research Program ofChina (Project No. 2005CB221405)the National "863" Project ofChina (No. 2006AA10Z425)the Beijing Natural Science Foun-dation (Project No: 8062023)
文摘A series of Ni/SBA-15 catalysts with Ni contents ranging from 5 wt% to 15 wt%, as well as another series of 10%Ni/MgO/SBA-15 catalysts, in which the range of the MgO content was from 1 wt% to 7 wt%, were prepared, and their catalytic performances for the reaction of combined steam and carbon dioxide reforming of methane were investigated in a continuous flow microreactor. The structures of the catalysts were characterized using the XRD, H2-TPR and CO2-TPD techniques. The results indicated that the CO selectivity for this reaction was very close to 100%, and the H2/CO ratio of the product gas could be controlled by changing the H2O/CO2 molar ratio of the feed gas. The simultaneous and plentiful existing of steam and CO2 had a significant influence on the catalytic performance of the 10%Ni/SBA-15 catalyst without modification. After reacting at 850 °C for 120 h over this catalyst, the CH4 conversion dropped from 98% to 85%, and the CO2 conversion decreased from 86% to 53%. However, the 10%Ni/3%MgO/SBA-15 catalyst exhibited a much better catalytic performance, and after reacting for 620 h, the CO2 conversion over this catalyst dropped from 92% to around 77%, while the CH4 conversion was not decreased. Oxidation of the Ni0 species as well as carbon deposition during the reaction were the main reasons for the deactivation of the catalyst without modification. On the other hand, modification by the MgO promoter improved the dispersion of the Ni0 species, and enhanced the CO2 adsorption affinity which in turn depressed the occurring of carbon deposition, and thus retarded the deactivation process.
基金supported by the National Basic Research Program of China(Project No.2005CB221405)the National "863" Project of China (No.2006AA10Z425)the Beijing Natural Science Foundation (Project No: 8062023)
文摘A series of Ni/SBA-15 catalysts with Ni contents from 7.5 wt% to 15 wt% were prepared by impregnation method.The effect of O2 and H2O on the combined reforming of the simulated biogas to syngas was investigated in a continuous flow fixed-bed micro-reactor.The stability of the catalyst was tested at 800 ？C.The results indicated that 10wt%Ni/SBA-15 catalyst exhibited the highest catalytic activities for the combined reforming of the simulated biogas to syngas.Under the reaction conditions of the feed gas molar ratios CH4/CO2/O2/H2O = 2/1/0.6/0.6,GHSV = 24000 ml·gcat^-1·h^-1 and the reaction temperature T = 800 ℃,the conversions of CH4 and CO2 were 92.8% and 76.3%,respectively,and the yields of CO and H2 were 99.0% and 82.0%,respectively.The catalytic activities of the catalyst did not decrease obviously after 100 h reaction time on stream.
基金supported by the National Natural Science Foundation of China(21377016,21577014)Program for Changjiang Scholars and Innovative Research Team in University(IRT_13R05)~~
文摘The catalytic oxidation of toluene over Ag/SBA‐15synthesized under different pretreatment conditions,including O2at500°C(denoted O500),H2at500°C(H500),and O2at500°C followed by H2at300°C(O500‐H300)was studied.The pretreated samples were investigated by N2physisorption,X‐ray diffraction,and ultraviolet‐visible diffuse reflectance.The pretreatment atmosphere greatly influences the status of the Ag and O species,which in turn significantly impacts the adsorption and catalytic removal of toluene.Ag2O and amorphous Ag particles,as well as a large amount of subsurface oxygen species,are formed on O500,and the subsurface oxygen enhances the interaction between Ag species and toluene,so O500shows good activity at higher temperature.However,its activity at lower temperature is not as high as expected,with a reduced presence of Ag2O and lower adsorption capacity for toluene.H2pretreatment at500°C is conducive to the formation of large Ag particles and yields the largest adsorption capacity for toluene,so H500exhibits the best activity at lower temperatures;however,because of poor interaction between Ag and toluene,its activity at higher temperature is modest.The O500‐H300sample exhibits excellent catalytic activity during the whole reaction process,which can be attributed to the small and highly dispersed Ag nanoparticles as well as the existence of subsurface oxygen.
基金supported by NSFC(21376261,21173270,21177160)Beijing Natural Science Foundation(2142027)+1 种基金863 Program of China(2013AA065302)the Doctor Select Foundation(20130007110007)
文摘SBA-15 supported Mo catalysts （Moy/SBA-15） were prepared by an ultrasonic assisted incipient-wetness impregnation method. The physical and chemical properties of the catalysts were characterized by means of N2-adsorption-desorption, XRD, TEM, UV-Vis, Raman, XANES and H2-TPR. The results showed that a trace amount of MoO3 was produced on high Mo content samples. Tum-over frequency （TOF） and product selectivity are dependent on the molybdenum content. Both Mo0.75/SBA-15 and Mo1.75/SBA-15 catalysts give the higher catalytic activity and the selectivity to the total aldehydes for the selective oxidation of C2H6. At the reaction temperature of 625℃, the maximum yield of aldehydes reached 4.2% over Mo0.75/SBA-15 catalyst. The improvement of the activity and selectivity was related with the state of MoOx species.
基金supported by the Science & Technology Support Plan Projects of Sichuan Province (2016GZ0371)National Natural Science Foun-dation of China (NNSFC,21476145,21506111)~~
文摘A series of Sn‐incorporated SBA‐15materials with high specific surface areas and highly orderedmesoporous structures were synthesized by a facile one‐pot method and used as catalyst supports.A reference sample was also prepared using a conventional impregnation method.The catalystswere characterized using various methods,and their activities in propane dehydrogenation wereinvestigated.The incorporation of Sn into the SBA‐15matrix led to strong interactions between Snspecies and the support,and these helped to maintain the oxidation states of Sn species during thereaction.Substitution with Sn changed the interfacial properties of the Pt species and improved thefunction and effect of the Sn promoter.The catalytic activities and stabilities of the Pt catalysts supportedon Sn‐incorporated SBA‐15were better than those of the impregnated sample.However,thecatalytic performance deteriorated when an excessive amount of Sn was introduced and the interactionsamong Pt,Sn species,and the support became weaker.The Pt/0.5Sn‐SBA‐15catalyst gavethe best propene selectivity,i.e.,98.5%,with a corresponding propane conversion of about43.8%.
基金supported by the Coordenao de Aperfeioamento de Pessoal de Nível Superior(CAPES)and Petrobras
文摘The aim of this work was to evaluate the catalytic properties of a Ru promoted Co/SBA-15 catalyst for Fischer-Tropsch synthesis （FTS）. The Ru promoted Co/SBA-15 catalyst was prepared by wet impregnation method and was characterized by X-ray diffraction, X-ray energy dispersion spectrophotometer, N2 adsorption-desorption, temperature-programmed reduction and transmission electron microscopy. The Fischer-Tropsch synthesis using the catalyst was carried out to evaluate the catalyst activity and its effect on FTS product distribution. The synthesis was carried out in a slurry reactor operating at 513 K, 20 atm, CO ： H2 molar ratio of 1 ： 1. X-ray diffraction showed that the calcined cobalt catalyst did not modify the structure of SBA-15, proving that Co was present in the form of Co3O4 in the catalyst. The addition of cobalt in SBA-15 decreased the specific superficial area of the molecular sieve. Fischer-Tropsch synthesis activity and C5＋ hydrocarbon selectivity increased with the addition of Ru. The increases in activity and selectivity were attributed to the increased number of active sites resulting from higher reducibility and the synergetic effect of Ru and Co. Ru/Co/SBA-15 catalysts showed moderate conversion （40%） and high selectivity towards the production of C5＋ （80 wt%）.
基金the Production and Research Prospective Joint Research Project(BY2009153)the Science and Technology Support Program(BE2008129) of Jiangsu Province of Chinathe National Nature Science Foundation of China(50873026) for financial supports
文摘PtSnNa/AlSBA-15 catalysts with different amounts of Sn were prepared for propane dehydrogenation.The catalysts were characterized by XRF,BET,H2 chemisorption,NH3-TPD,H2-TPR,and TPO techniques.Test results indicated that the presence of tin not only modified the acid function and the interfacial character between metal and support,but also reduced the coke deposition effectively.Among these catalysts investigated thereby,the PtSn(0.7%)Na/AlSBA-15 catalyst had the best catalytic performance in terms of propane conversion and stability.With the continuous addition of Sn,more amounts of Sn0 species appeared,which was unfavorable to the reaction.The PtSn(0.7%)Na/AlSBA-15 catalyst was parametrically characterized in order to obtain necessary information to integrate the process operating conditions.A weight hourly space velocity of 3 h-1,a reaction temperature of 610 ℃ and a H2/C3H8 molar ratio of 0.25 were found to be optimum conditions for achieving a higher dehydrogenation activity of the catalyst.
基金the National Natural Science Foundation of China(No.51676191&5181101221)Local Innovative and Research Teams Project of Guangdong Pearl River Talents Program(No.2017BT01N092)+1 种基金“Transformational Technologies for Clean Energy and Demonstration”,Strategic Priority Research Program of the Chinese Academy of Sciences(No.XDA 21060102)Jiangsu Key Laboratory for Biomass Energy and Material(JSBEM201905).
文摘Efficiency and recycling of catalysts are important for the lignin hydrogenolysis to obtain phenolic monomers.In this work,a series of highdispersion Ni/AlSBA15 catalysts were prepared by a direct and effective preparation method,and then used in the hydrogenolysis of diphenyl ether(DE)and organosolv hydrolyzed lignin(OHL)for phenolic monomers.The universality of asmade catalysts in different solvents and cyclic performance were investigated.Results showed that the addition of ethylene glycol(EG)during the loading process of Ni promoted the dispersion of metal efficiently.High dispersion of Ni species could highly enhance the conversion of DE and the OHL which Ni/AlSBA15(1EG)exhibited the excellent catalytic performance.Decalin was found to be most effective solvent on the conversion of DE(99.16%).84.77%liquefaction ratio and 21.36%monomer yield were achieved,and no obvious char was observed after the depolymerization of OHL in ethanol solvent at 280℃for 4 h over the Ni/AlSBA15(1EG)catalyst.
基金Supported by the National Basic Research Program of China(2006CB202503)the Science Foundation of PetroChina(2010D-5006-0401)
文摘A series of B-Ni2P/SBA-15/cord monolithic catalysts were prepared by coating the slurry of the B-Ni2P/SBA-15 precursors on a pretreated cordierite support, and followed by temperature-programmed reduction in a H2 flow. The samples were characterized by X-ray diffraction （XRD） and N2 adsorption-desorption technique. The catalytic activities for the hydrodesulfurization （HDS） of dibenzothiophene （DBT） were evaluated. The results showed that Ni2P phase was present in all B-Ni2P/SBA-1 5/cord monolithic catalysts. The specific surface areas （SBET） of the B-Ni2P/SBA-15/cord monolithic catalysts was first increased to 167 m2· g-1, and then decreased to 155 m2· g-1 with the increase of boron contents. The catalytic activity also showed the similar trend with the increase of boron contents. The 1.75% （by mass） B-Ni2P/SBA-15/cord monolithic catalysts exhibited the highest DBT conversion of 98.4% at 380 ℃. The cordierite-based monolithic catalysts showed better low temperature sensitivity for HDS of DBT in comparison with the particle catalysts. Moreover, two HDS routes, direct desulfurization （DDS） and hydrogenation （HYD）, proceeded independently over B-Ni2P/SBA-15/cord monolithic catalysts and the main pathway was DDS.
