Baseline wander is a common noise in electrocardiogram (ECG) results.To effectively correct the baseline and to preserve more underlying components of an ECG signal,we propose a simple and novel filtering method based...Baseline wander is a common noise in electrocardiogram (ECG) results.To effectively correct the baseline and to preserve more underlying components of an ECG signal,we propose a simple and novel filtering method based on a statistical weighted moving average filter.Supposed a and b are theminimum and maximum of all sample values within a moving window,respectively.First,the whole region [a,b] is divided into M equal sub-regions without overlap.Second,three sub-regions with the largest sample distribution probabilities are chosen (except M<3) and incorporated into one region,denoted as [a 0,b 0 ] for simplicity.Third,for every sample point in the moving window,its weight is set to 1 if its value falls in [a 0,b 0 ];otherwise,its weight is 0.Last,all sample points with weight 1 are averaged to estimate the baseline.The algorithm was tested by simulated ECG signal and real ECG signal from www.physionet.org.The results showed that the proposed filter could more effectively extract baseline wander from ECG signal and affect the morphological feature of ECG signal considerably less than both the traditional moving average filter and wavelet package translation did.展开更多
The problem of the robust fault detection filter design for time-varying delays switched systems is considered in the framework of mixed H-/H∞. Firstly, the weighted H∞ performance index is utilized as the robustnes...The problem of the robust fault detection filter design for time-varying delays switched systems is considered in the framework of mixed H-/H∞. Firstly, the weighted H∞ performance index is utilized as the robustness performance, and the H- index is used as the sensitivity performance for obtaining the robust fault detection filter. Then a novel multiple Lyapunov-Krasovskii function is proposed for deriving sufficient existence conditions of the robust fault detection filter based on the average dwell time technique. By introducing slack matrix variable, the coupling between the Lyapunov matrix and system matrix is removed, and the conservatism of results is reduced. Based on the robust fault detection filter, residual is generated and evaluated for detecting faults. In addition, the results of this paper are dependent on time delays,and represented in the form of linear matrix inequalities. Finally,the simulation example verifies the effectiveness of the proposed method.展开更多
A fully digital data acquisition system based on a field-programmable gate array(FPGA) was developed for a CsI(Tl) array at the external target facility(ETF) in the Heavy Ion Research Facility in Lanzhou(HIRFL). To pr...A fully digital data acquisition system based on a field-programmable gate array(FPGA) was developed for a CsI(Tl) array at the external target facility(ETF) in the Heavy Ion Research Facility in Lanzhou(HIRFL). To process the CsI(Tl) signals generated by γ-rays and light-charged ions, a scheme for digital pulse processing algorithms is proposed. Every step in the algorithms was benchmarked using standard γ and α sources. The scheme, which included a moving average filter, baseline restoration, leading-edge discrimination, moving window deconvolution, and digital charge comparison, was subsequently implemented on the FPGA. A good energy resolution of 5.7% for 1.33-MeV γ-rays and excellent α-γ identification using the digital charge comparison method were achieved, which satisfies CsI(Tl) array performance requirements.展开更多
基金supported by the Science and Technology Project of Guangdong Province (No.2009B060700124)the Science and Technology Project of Guangzhou Municipality,Guangdong Province,China (No.2010Y1-C801)
文摘Baseline wander is a common noise in electrocardiogram (ECG) results.To effectively correct the baseline and to preserve more underlying components of an ECG signal,we propose a simple and novel filtering method based on a statistical weighted moving average filter.Supposed a and b are theminimum and maximum of all sample values within a moving window,respectively.First,the whole region [a,b] is divided into M equal sub-regions without overlap.Second,three sub-regions with the largest sample distribution probabilities are chosen (except M<3) and incorporated into one region,denoted as [a 0,b 0 ] for simplicity.Third,for every sample point in the moving window,its weight is set to 1 if its value falls in [a 0,b 0 ];otherwise,its weight is 0.Last,all sample points with weight 1 are averaged to estimate the baseline.The algorithm was tested by simulated ECG signal and real ECG signal from www.physionet.org.The results showed that the proposed filter could more effectively extract baseline wander from ECG signal and affect the morphological feature of ECG signal considerably less than both the traditional moving average filter and wavelet package translation did.
基金supported by the National Natural Science Foundation of China(6127316261403104)
文摘The problem of the robust fault detection filter design for time-varying delays switched systems is considered in the framework of mixed H-/H∞. Firstly, the weighted H∞ performance index is utilized as the robustness performance, and the H- index is used as the sensitivity performance for obtaining the robust fault detection filter. Then a novel multiple Lyapunov-Krasovskii function is proposed for deriving sufficient existence conditions of the robust fault detection filter based on the average dwell time technique. By introducing slack matrix variable, the coupling between the Lyapunov matrix and system matrix is removed, and the conservatism of results is reduced. Based on the robust fault detection filter, residual is generated and evaluated for detecting faults. In addition, the results of this paper are dependent on time delays,and represented in the form of linear matrix inequalities. Finally,the simulation example verifies the effectiveness of the proposed method.
基金supported by the Open Research Project of CAS Large Research InfrastructuresCAS Key Technology Talent ProgramNational Natural Science Foundations of China (Nos.U2031206 and 12273086)
文摘A fully digital data acquisition system based on a field-programmable gate array(FPGA) was developed for a CsI(Tl) array at the external target facility(ETF) in the Heavy Ion Research Facility in Lanzhou(HIRFL). To process the CsI(Tl) signals generated by γ-rays and light-charged ions, a scheme for digital pulse processing algorithms is proposed. Every step in the algorithms was benchmarked using standard γ and α sources. The scheme, which included a moving average filter, baseline restoration, leading-edge discrimination, moving window deconvolution, and digital charge comparison, was subsequently implemented on the FPGA. A good energy resolution of 5.7% for 1.33-MeV γ-rays and excellent α-γ identification using the digital charge comparison method were achieved, which satisfies CsI(Tl) array performance requirements.