This paper focuses on the simulation and test of the switched reluctance starter/generator systems. Through the emulational analysis of the initial starting torque, the optimal turn-on section of the power switches is...This paper focuses on the simulation and test of the switched reluctance starter/generator systems. Through the emulational analysis of the initial starting torque, the optimal turn-on section of the power switches is discovered. The fundamental theory of the generating operation is analyzed with the linearity model, and a new method is presented based on voltage pulse width modulation for the generating mode control. Through the steady-state and optimized emulation of the output power and system efficiency, the optimizational control approach for the generating mode over a wide speed range is introduced. At last, the test of the 3KW prototype system shows that the dynamic and static performance of this system is fine.展开更多
According to specific performance requirements,an integrated switched reluctance starter/generator system,which can start the engine and supply electrical energy to the loads,is designed and manufactured for the unman...According to specific performance requirements,an integrated switched reluctance starter/generator system,which can start the engine and supply electrical energy to the loads,is designed and manufactured for the unmanned aerial vehicle.Considering the required starting torque and speed range,the geometrical dimensions of the switched reluctance machine are calculated based on the output equation and further optimized with finite element analysis,and the flux-linkage,inductance and static torque characteristics are illustrated.To verify the performances of the designed system,detailed simulation with the model considering piston engine and experiment using the test bench are carried out.展开更多
A self-designed and developed 12/10 switched reluctance motor(SRM)is chosen as the object of study and a prototype of 2.5?kW switched reluctance starter/generator with fly-wheel is designed based on the requirements o...A self-designed and developed 12/10 switched reluctance motor(SRM)is chosen as the object of study and a prototype of 2.5?kW switched reluctance starter/generator with fly-wheel is designed based on the requirements of the selected engine (Changan Aotooc three-cylinder engine wagon) for the starter, generator and drive. The 36?V/42 V DC source system is applied to establishing the simulation-analyzing model of the motor. A finite-element (FE) analysis of its two-dimensional electromagnetic field is conducted to obtain the exact model of the motor. Systematic simulation is carried out combining with its power conversion circuit and control element. Meanwhile the starting process and performance of the system are studied and analyzed with special efforts. Satisfactory result is derived from the testing of the prototype: theoretical analysis is basically matched with the tested data, which proves the rationality and feasibility of the design procedures, systematic modeling and control strategies. Therefore, the new 12/10-structure scheme is put forward based on the development and analysis of various SRM and it meets the requirements of the researched motor in terms of the structural parameters.展开更多
Power generation becomes the need of developed, developing and under developed countries to meet their increasing power requirements. When affordability increases their requirement of power increases, this happens whe...Power generation becomes the need of developed, developing and under developed countries to meet their increasing power requirements. When affordability increases their requirement of power increases, this happens when increased per capita consumption. The existing power scenario states that highest power is produced using firing of coals called thermal energy. A high efficiency Switched Reluctance Generator (SRG) based high frequency switching scheme to enhance the output for grid connectivity is designed, fabricated and evaluated. This proposed method generates the output for the low wind speed. It provides output at low speed because of multi-level DC-DC converter and storage system. It is an efficient solution for low wind power generation. The real time readings and results are discussed.展开更多
In order to better realize the energy recovery and storage of hybrid EVs(HEVs),a switched reluctance starter/generator(SRS/G)with both starting and power generation functions is investigated in this paper.First,the ir...In order to better realize the energy recovery and storage of hybrid EVs(HEVs),a switched reluctance starter/generator(SRS/G)with both starting and power generation functions is investigated in this paper.First,the iron loss of SRS/G is mainly studied to reduce the motor loss and improve the power generation efficiency.Then,the energy storage of hybrid EVs can be effectively improved.Secondly,a magnetic flux density(MFD)waveforms solution method is proposed to solve the difficulty in calculating the iron loss of the SRS/G.Compared with the commonly used finite element method,the proposed solution method has the advantages of simple,fast and small computational amount.Meanwhile,considering the different operating conditions of SRS/G,the iron loss models for both the time-domain and frequency-domain are established.In addition,the calculation formula of the variable coefficient Bertotti three-term loss separation is improved.As the hysteresis loss coefficient,the Steinmetz coefficient and the stray loss coefficient are respectively fitted by the Fourier fitting method.This method is also applied to solve the iron loss of SRS/G.Finally,through an experimental verification,it is indicated that the development of proposed method has high accuracy.展开更多
The basic concepts and advantages of more/all electric aircraft （M/AEA） are briefly addressed. The combined starter/generator （CS/G） system is introduced as a key technology to enable M/AEA. Some important perform...The basic concepts and advantages of more/all electric aircraft （M/AEA） are briefly addressed. The combined starter/generator （CS/G） system is introduced as a key technology to enable M/AEA. Some important performance requirements for CS/G system are obtained. Based on these requirements, a high speed switched reluctance machine （SRM） is designed to operate as a starter/generator. The entire design process is mainly divided into two stages： electromagnetic design and thermal design. In electromagnetic design stage, the electromagnetic structure and dimensions of the machine and the number of phase winding turns per pole are obtained; the topology and main technical details of the converter are briefly introduced as well. In thermal design stage, a liquid-cooling system is designed based on the thermal analysis of the machine. In the end, the performances of the designed SRM are basically verified by simulation. To get high performances, the exciting angles are optimized in two different operating modes respectively, and the optimized performances in the motoring mode are given as well.展开更多
The electromagnetic torque and speed in Switched Reluctance Motor (SRM) greatly depend on the excitation parametersi.e. turn-on angle, turn-off angle, dwell angle and magnitude of the phase currents of its phases...The electromagnetic torque and speed in Switched Reluctance Motor (SRM) greatly depend on the excitation parametersi.e. turn-on angle, turn-off angle, dwell angle and magnitude of the phase currents of its phases. At lower speeds, a change in the current contributes the torque requirement which can be achieved either by voltage control (pulse width modulation) or instantaneous current control techniques. At high speeds, due to high back EMF, the regulation of current is crucial and achieved with the control of switching angles of phases. This type of control is referred as average torque control, where the torque is averaged over one stroke (2π/N<sub>r</sub>). With constant dwell angle, advancing the phase angle influences the current into the phase winding at minimum inductance position. It has more time to get the current out of the phase winding before the rotor reaches the negative inductance slope. To maintain the speed of the motor at different load conditions, the turn-on and turn-off angles are adaptively varied. The change in dwell angle may be required where the turn-on and turn-off angle may not be sufficient to reach the required speed. In this paper, a new algorithm is proposed for self tuning of switching parameters of SRM. The proposed algorithm is simulated in MATLAB-Simulink and experimentally validated with Field Programmable Gated Array (FPGA) using MATLAB- system generator environment.展开更多
文摘This paper focuses on the simulation and test of the switched reluctance starter/generator systems. Through the emulational analysis of the initial starting torque, the optimal turn-on section of the power switches is discovered. The fundamental theory of the generating operation is analyzed with the linearity model, and a new method is presented based on voltage pulse width modulation for the generating mode control. Through the steady-state and optimized emulation of the output power and system efficiency, the optimizational control approach for the generating mode over a wide speed range is introduced. At last, the test of the 3KW prototype system shows that the dynamic and static performance of this system is fine.
基金This work was supported by the Key Research and Development Plan of Shaanxi Province under Grant 2018GY-185,Xi'an Science and Technology Plan under Grant 2017086CG/RC049(XBGY002)the ASN Innovation Development Fund under Grant ASN-IF2015-3110the Fundamental Research Funds for the Central Universities under Grants 3102017AX007.
文摘According to specific performance requirements,an integrated switched reluctance starter/generator system,which can start the engine and supply electrical energy to the loads,is designed and manufactured for the unmanned aerial vehicle.Considering the required starting torque and speed range,the geometrical dimensions of the switched reluctance machine are calculated based on the output equation and further optimized with finite element analysis,and the flux-linkage,inductance and static torque characteristics are illustrated.To verify the performances of the designed system,detailed simulation with the model considering piston engine and experiment using the test bench are carried out.
文摘A self-designed and developed 12/10 switched reluctance motor(SRM)is chosen as the object of study and a prototype of 2.5?kW switched reluctance starter/generator with fly-wheel is designed based on the requirements of the selected engine (Changan Aotooc three-cylinder engine wagon) for the starter, generator and drive. The 36?V/42 V DC source system is applied to establishing the simulation-analyzing model of the motor. A finite-element (FE) analysis of its two-dimensional electromagnetic field is conducted to obtain the exact model of the motor. Systematic simulation is carried out combining with its power conversion circuit and control element. Meanwhile the starting process and performance of the system are studied and analyzed with special efforts. Satisfactory result is derived from the testing of the prototype: theoretical analysis is basically matched with the tested data, which proves the rationality and feasibility of the design procedures, systematic modeling and control strategies. Therefore, the new 12/10-structure scheme is put forward based on the development and analysis of various SRM and it meets the requirements of the researched motor in terms of the structural parameters.
文摘Power generation becomes the need of developed, developing and under developed countries to meet their increasing power requirements. When affordability increases their requirement of power increases, this happens when increased per capita consumption. The existing power scenario states that highest power is produced using firing of coals called thermal energy. A high efficiency Switched Reluctance Generator (SRG) based high frequency switching scheme to enhance the output for grid connectivity is designed, fabricated and evaluated. This proposed method generates the output for the low wind speed. It provides output at low speed because of multi-level DC-DC converter and storage system. It is an efficient solution for low wind power generation. The real time readings and results are discussed.
基金supported in part by the Shenzhen Collaborative Innovation Special Plan International Cooperation Research Project(No.GJHZ20220913144400001)the General Research Project of Shenzhen Science and Technology Plan(No.JCYJ20220818100000001).
文摘In order to better realize the energy recovery and storage of hybrid EVs(HEVs),a switched reluctance starter/generator(SRS/G)with both starting and power generation functions is investigated in this paper.First,the iron loss of SRS/G is mainly studied to reduce the motor loss and improve the power generation efficiency.Then,the energy storage of hybrid EVs can be effectively improved.Secondly,a magnetic flux density(MFD)waveforms solution method is proposed to solve the difficulty in calculating the iron loss of the SRS/G.Compared with the commonly used finite element method,the proposed solution method has the advantages of simple,fast and small computational amount.Meanwhile,considering the different operating conditions of SRS/G,the iron loss models for both the time-domain and frequency-domain are established.In addition,the calculation formula of the variable coefficient Bertotti three-term loss separation is improved.As the hysteresis loss coefficient,the Steinmetz coefficient and the stray loss coefficient are respectively fitted by the Fourier fitting method.This method is also applied to solve the iron loss of SRS/G.Finally,through an experimental verification,it is indicated that the development of proposed method has high accuracy.
文摘The basic concepts and advantages of more/all electric aircraft （M/AEA） are briefly addressed. The combined starter/generator （CS/G） system is introduced as a key technology to enable M/AEA. Some important performance requirements for CS/G system are obtained. Based on these requirements, a high speed switched reluctance machine （SRM） is designed to operate as a starter/generator. The entire design process is mainly divided into two stages： electromagnetic design and thermal design. In electromagnetic design stage, the electromagnetic structure and dimensions of the machine and the number of phase winding turns per pole are obtained; the topology and main technical details of the converter are briefly introduced as well. In thermal design stage, a liquid-cooling system is designed based on the thermal analysis of the machine. In the end, the performances of the designed SRM are basically verified by simulation. To get high performances, the exciting angles are optimized in two different operating modes respectively, and the optimized performances in the motoring mode are given as well.
文摘The electromagnetic torque and speed in Switched Reluctance Motor (SRM) greatly depend on the excitation parametersi.e. turn-on angle, turn-off angle, dwell angle and magnitude of the phase currents of its phases. At lower speeds, a change in the current contributes the torque requirement which can be achieved either by voltage control (pulse width modulation) or instantaneous current control techniques. At high speeds, due to high back EMF, the regulation of current is crucial and achieved with the control of switching angles of phases. This type of control is referred as average torque control, where the torque is averaged over one stroke (2π/N<sub>r</sub>). With constant dwell angle, advancing the phase angle influences the current into the phase winding at minimum inductance position. It has more time to get the current out of the phase winding before the rotor reaches the negative inductance slope. To maintain the speed of the motor at different load conditions, the turn-on and turn-off angles are adaptively varied. The change in dwell angle may be required where the turn-on and turn-off angle may not be sufficient to reach the required speed. In this paper, a new algorithm is proposed for self tuning of switching parameters of SRM. The proposed algorithm is simulated in MATLAB-Simulink and experimentally validated with Field Programmable Gated Array (FPGA) using MATLAB- system generator environment.
