期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
Investigation of ZSM-5/MCM-41 Composite Molecular Sieve for Reducing Olefin Content of FCC Gasoline 被引量:5
1
作者 Ji Dekun~(1,2) Li Shuyuan~1 +2 位作者 Ding Fuchen~2 Chi Yaoling~2 (1.Chemical Engineering School,China University of Petroleum(Beijing),Beijing 102249 2.Department of Chemical Engineering,Beijing Institute of Petrochemical Technology) 《China Petroleum Processing & Petrochemical Technology》 SCIE CAS 2009年第4期10-17,共8页
ZSM-5/MCM-41 composite molecular sieve was prepared by the nano-assembling method.The ZSM-5 molecular sieve,the MCM-41 molecular sieve,the ZSM-5/MCM-41 mechanical mixture and the ZSM-5/MCM-41 composite molecular sieve... ZSM-5/MCM-41 composite molecular sieve was prepared by the nano-assembling method.The ZSM-5 molecular sieve,the MCM-41 molecular sieve,the ZSM-5/MCM-41 mechanical mixture and the ZSM-5/MCM-41 composite molecular sieve were characterized by X-ray powder diffractometry,N<sub>2</sub> adsorption isotherms,temperature programmed desorption of ammonia and scanning electron microscopy and their properties were analyzed.Using FCC gasoline as the feed,activities of different molecular sieves for reducing olefin content were investigated in a continuous high-pressure micro-reactor unit under the following conditions:a reaction temperature of 400℃,a reaction time of 2 h,a weight hourly space velocity of 3h<sup>-1</sup>,and a reaction pressure of 2.0 MPa.The results showed that the HMCM-41 molecular sieve had low reaction performance,and the HZSM-5 molecular sieve demonstrated high aromatization activity,while the ZSM-5/MCM- 41 composite molecular sieve exhibited a best olefin-reducing performance because of its high isomerization activity and moderate aromatization activity.With a largest olefin-reducmg capability and a reasonable distribution of products,the composite molecular sieve was more suitable for FCC gasoline upgrading compared to other three catalysts. 展开更多
关键词 zsm-5 MCM-41 composite molecular sieve FCC gasolin
下载PDF
基于双模板剂B-EU-1/ZSM-5复合分子筛的合成与表征 被引量:3
2
作者 王新波 杨冬花 +2 位作者 石宝宝 武正簧 窦涛 《化工新型材料》 CAS CSCD 北大核心 2015年第2期123-125,共3页
首次在Na2O-SiO2-Al2O3-TPABr(四丙基溴化铵)-HMBr2(溴化六甲双铵)-H2O合成体系中,以溴化六甲双铵(HMBr2)和四丙基溴化铵(TPABr)为双模板剂,采用一步晶化法合成了具有微-微孔道结构的B-EU-1/ZSM-5复合分子筛,并通过XRD,FT-IR,SEM等手段... 首次在Na2O-SiO2-Al2O3-TPABr(四丙基溴化铵)-HMBr2(溴化六甲双铵)-H2O合成体系中,以溴化六甲双铵(HMBr2)和四丙基溴化铵(TPABr)为双模板剂,采用一步晶化法合成了具有微-微孔道结构的B-EU-1/ZSM-5复合分子筛,并通过XRD,FT-IR,SEM等手段对合成样品的物性进行表征;分析发现合成的复合分子筛同时具有ZSM-5和EU-1的特征衍射峰,结晶度较好,是两种晶相相互作用的分子分散晶相材料;通过合成条件的探究,发现复合分子筛的生长过程与两种模板剂的比例有关,在0.2<n(四丙基溴化铵)/n(溴化六甲双铵)<0.5的范围内是复合分子筛适宜的生长环境,得到合成的最佳条件为:n(四丙基溴化铵)/n(溴化六甲双铵)=0.4,晶化时间72h。 展开更多
关键词 b-eu-1/zsm-5复合分子筛 双模板剂 一步晶化法 水热法
下载PDF
含铁微孔EU-1/ZSM-5复合分子筛的合成和表征 被引量:1
3
作者 杨瑞娟 杨冬花 +7 位作者 武正簧 冯晓娜 窦涛 吴忠华 李志宏 闫泽 王凡 汤琼 《燃料化学学报》 EI CAS CSCD 北大核心 2013年第5期601-606,共6页
采用预置晶种法合成了含铁的微孔EU-1/ZSM-5复合分子筛,并采用X射线粉末衍射(XRD)、扫描电子显微镜(SEM)、热重-微分热重(TG-DTG)、N2吸附-脱附、紫外-可见吸收光谱(UV-vis DRS)、X射线吸收精细结构(XAFS)等手段进行了表征。结果表明,... 采用预置晶种法合成了含铁的微孔EU-1/ZSM-5复合分子筛,并采用X射线粉末衍射(XRD)、扫描电子显微镜(SEM)、热重-微分热重(TG-DTG)、N2吸附-脱附、紫外-可见吸收光谱(UV-vis DRS)、X射线吸收精细结构(XAFS)等手段进行了表征。结果表明,复合分子筛具有EU-1和ZSM-5的特征衍射峰,是两种晶相相互作用的分子分散晶相材料,微孔孔径较Fe-EU-1分子筛有所增大。随原始溶胶中铁的质量分数增加,复合分子筛具有的23.09°和23.94°处的特征衍射峰逐渐向低角度方向偏移;紫外-可见漫反射谱图中在220~245 nm出现了宽的吸收谱带;XAFS表征表明,1s→3d电子跃迁的弱吸收峰逐渐增强,同时在吸收边顶部出现的1s→4p吸收峰逐渐由宽变窄。合成工艺的最佳条件为,原始溶胶中铁的质量分数为0.075%~0.15%,晶种添加比例为15.0%~21.0%,晶种SiO2/Al2O3物质的量比为50~60。 展开更多
关键词 预置晶种 Fe—EU-1 zsm-5 复合分子筛 合成
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部