Dynamic and electrical responses of a curved sandwich beam with glass reinforced laminate layers and a pliable core in the presence of a piezoelectric layer under low-velocity impact

The dynamic responses and generated voltage in a curved sandwich beam with glass reinforced laminate(GRL)layers and a pliable core in the presence of a piezoelectric layer under low-velocity impact(LVI)are investigated.The current study aims to carry out a dynamic analysis on the sandwich beam when the impactor hits the top face sheet with an initial velocity.For the layer analysis,the high-order shear deformation theory(HSDT)and Frostig's second model for the displacement fields of the core layer are used.The classical non-adhesive elastic contact theory and Hunter's principle are used to calculate the dynamic responses in terms of time.In order to validate the analytical method,the outcomes of the current investigation are compared with those gained by the experimental tests carried out by other researchers for a rectangular composite plate subject to the LVI.Finite element(FE)simulations are conducted by means of the ABAQUS software.The effects of the parameters such as foam modulus,layer material,fiber angle,impactor mass,and its velocity on the generated voltage are reviewed.

The quadratic B-spline curve fitting for the shape of log cross sections

This paper describes a new method for simulation of the cross section shape of log. The self-developed MQK3102 log shape recognizing machine was used to acquire the finite discrete sampling points on the cross section of log and those points were fitted with the quadratic B-spline parametric curve. This method can clearly stimulate the real shape of the log cross section and is characterized by limited sampling points and high speed computing. The computed result of the previous curve does not affect the next one, which may avoid the graphic distortion caused by the accumulative error. The method can be used to simulate the whole body shape of log approximately by sampling the cross sections along the length direction of log, thus providing a reference model for optimum saw cutting of log.

Efficient Construction of B-Spline Curves with Minimal Internal Energy

In this paper,we propose an efficient method to construct energy-minimizing B-spline curves by using discrete mask method.The linear relations between control points are firstly derived for different energy-minimization problems,then the construction of B-spline curve with minimal internal energy can be addressed by solving a sparse linear system.The existence and uniqueness of the solution for the linear system are also proved.Experimental results show the efficiency of the proposed approach,and its application in 1 G blending curve construction is also presented.

A Novel Contour Tracing Algorithm for Object Shape Reconstruction Using Parametric Curves

Parametric curves such as Bézier and B-splines, originally developedfor the design of automobile bodies, are now also used in image processing andcomputer vision. For example, reconstructing an object shape in an image,including different translations, scales, and orientations, can be performedusing these parametric curves. For this, Bézier and B-spline curves can be generatedusing a point set that belongs to the outer boundary of the object. Theresulting object shape can be used in computer vision fields, such as searchingand segmentation methods and training machine learning algorithms. Theprerequisite for reconstructing the shape with parametric curves is to obtainsequentially the points in the point set. In this study, a novel algorithm hasbeen developed that sequentially obtains the pixel locations constituting theouter boundary of the object. The proposed algorithm, unlike the methods inthe literature, is implemented using a filter containing weights and an outercircle surrounding the object. In a binary format image, the starting point ofthe tracing is determined using the outer circle, and the next tracing movementand the pixel to be labeled as the boundary point is found by the filter weights.Then, control points that define the curve shape are selected by reducing thenumber of sequential points. Thus, the Bézier and B-spline curve equationsdescribing the shape are obtained using these points. In addition, differenttranslations, scales, and rotations of the object shape are easily provided bychanging the positions of the control points. It has also been shown that themissing part of the object can be completed thanks to the parametric curves.

Powell dynamic identification of displacement parameters of indeterminate thin-walled curve box based on FCSE theory

The FCSE controlling equation of pinned thinwalled curve box was derived and the indeterminate problem of continuous thin-walled curve box with diaphragm was solved based on flexibility theory. With Bayesian statistical theory,dynamic Bayesian error function of displacement parameters of indeterminate curve box was founded. The corresponding formulas of dynamic Bayesian expectation and variance were deduced. Combined with one-dimensional Fibonacci automatic search scheme of optimal step size,the Powell optimization theory was utilized to research the stochastic identification of displacement parameters of indeterminate thin-walled curve box. Then the identification steps were presented in detail and the corresponding calculation procedure was compiled. Through some classic examples,it is obtained that stochastic performances of systematic parameters and systematic responses are simultaneously deliberated in dynamic Bayesian error function. The one-dimensional optimization problem of the optimal step size is solved by adopting Fibonacci search method. And the Powell identification of displacement parameters of indeterminate thin-walled curve box has satisfied numerical stability and convergence,which demonstrates that the presented method and the compiled procedure are correct and reliable.During parameters鈥？iterative processes,the Powell theory is irrelevant with the calculation of finite curve strip element（FCSE） partial differentiation,which proves high computation effciency of the studied method.

Approximate merging of B-spline curves and surfaces

Applying the distance function between two B-spline curves with respect to the L2 norm as the approximate error, we investigate the problem of approximate merging of two adjacent B-spline curves into one B-spline curve. Then this method can be easily extended to the approximate merging problem of multiple B-spline curves and of two adjacent surfaces. After minimizing the approximate error between curves or surfaces, the approximate merging problem can be transformed into equations solving. We express both the new control points and the precise error of approximation explicitly in matrix form. Based on homogeneous coordinates and quadratic programming, we also introduce a new framework for approximate merging of two adjacent NURBS curves. Finally, several numerical examples demonstrate the effectiveness and validity of the algorithm.

Formulae of Tree Height Curve and Volume Curve Derived from Theory of Column Buckling

In this paper, the new formulae of tree height curve and volume cdrie were derived from the theory of column buckling. They were applied to artificial Pine (Pinus sylvestris var. mongolica) and Larch (Larix principis rupprechtii). The results demonsed that the new formulae wee more effeCtive and precise than conventional formulae of height curve and volume curve.

One Fairing Method of Cubic B-spline Curves Based on Weighted Progressive Iterative Approximation

A new method to the problem of fairing planar cubic B-spline curves is introduced in this paper. The method is based on weighted progressive iterative approximation （WPIA for short） and consists of following steps： finding the bad point which needs to fair, deleting the bad point, re-inserting a new data point to keep the structm-e of the curve and applying WPIA method with the new set of the data points to obtain the faired curve. The new set of the data points is formed by the rest of the original data points and the new inserted point. The method can be used for shape design and data processing. Numerical examples are provided to demonstrate the effectiveness of the method.

Dynamic Bayesian estimation of displacement parameters of continuous curve box based on Novozhilov theory

The finite strip controlling equation of pinned curve box was deduced on basis of Novozhilov theory and with flexibility method, and the problem of continuous curve box was resolved. Dynamic Bayesian error function of displacement parameters of continuous curve box was found. The corresponding formulas of dynamic Bayesian expectation and variance were derived. After the method of solving the automatic search of step length was put forward, the optimization estimation computing formulas were also obtained by adapting conjugate gradient method. Then the steps of dynamic Bayesian estimation were given in detail. Through analysis of a Classic example, the criterion of judging the precision of the known information is gained as well as some other important conclusions about dynamic Bayesian stochastic estimation of displacement parameters of continuous curve box.

B-spline curve-based routing in ad hoc networks

Routing algorithms capable of providing quality of service （QoS） will play an important role in future communication networks. For the trajectory-based routing （ TBR）, An effective method of en- coding trajectories into packets is proposed. The method uses a B-spline curve, which provides a lot of flexibility. The simulation results show that the performance of the proposed algorithms is im- proved significantly compared with the existing algorithm.

Nonequilibrium Solvent Free Energy Curve from Molecular Theory in Electron Transfer Reaction

The microscopic moleeular theory for electron transfer in a model solvent ishahr developed. The nonlinear response of the solvent molecules is be computedquanitatively in a new way. Adopting computer simulation daa and choosingappropriate reaction coordinae, a reasonable free energy dinram is constructed and thercorganhaion energy for the product state is calculated.

RECONSTRUCTION OF SYMMETRIC B-SPLINE CURVES AND SURFACES

A method to reconstruct symmetric B-spline curves and surfaces is presented. The symmetry property is realized by using symmetric knot vector and symmetric control points. Firstly, data points are divided into two parts based on the symmetry axis or symmetry plane extracted from data points. Then the divided data points are parameterized and a symmetric knot vector is selected in order to get symmetric B-spline basis functions. Constraint equations regarding the control points are deduced to keep the control points of the B-spline curve or surface to be symmetric with respect to the extracted symmetry axis or symmetry plane. Lastly, the constrained least squares fitting problem is solved with the Lagrange multiplier method. Two examples from industry are given to show that the proposed method is efficient, robust and able to meet the general engineering requirements.

THE RELATIONSHIP BETWEEN PROJECTIVE GEOMETRIC AND RATIONAL QUADRATIC B-SPLINE CURVES

Abstract For two rational quadratic B spline curves with same control vertexes, the cross ratio of four collinear points are represented: which are any one of the vertexes, and the two points that the ray initialing from the vertex intersects with the corresponding segments of the two curves, and the point the ray intersecting with the connecting line between the two neighboring vertexes. Different from rational quadratic Bézier curves, the value is generally related with the location of the ray, and the necessary and sufficient condition of the ratio being independent of the ray's location is showed. Also another cross ratio of the following four collinear points are suggested, i.e. one vertex, the points that the ray from the initial vertex intersects respectively with the curve segment, the line connecting the segments end points, and the line connecting the two neighboring vertexes. This cross ratio is concerned only with the ray's location, but not with the weights of the curve. Furthermore, the cross ratio is projective invariant under the projective transformation between the two segments.

An adaptive generation method for free curve trajectory based on NURBS

To realize the high precision and real-time interpolation of the NURBS （non-uniform rational B-spline） curve, a kinetic model based on the modified sigmoid function is proposed. The constraints of maximum feed rate, chord error, curvature radius and interpolator cycle are discussed. This kinetic model reduces the cubic polynomial S-shape model and the trigonometry function S-shape model from 15 sections into 3 sections under the precondition of jerk, acceleration and feedrate continuity. Then an optimized Adams algorithm using the difference quotient to replace the derivative is presented to calculate the interpolator cycle parameters. The higher-order derivation in the Taylor expansion algorithm can be avoided by this algorithm. Finally, the simplified design is analyzed by reducing the times of computing the low-degree zero-value B-spline basis function and the simplified De Boor-Cox recursive algorithm is proposed. The simulation analysis indicates that by these algorithms, the feed rate is effectively controlled according to tool path. The calculated amount is decreased and the calculated speed is increased while the machining precision is ensured. The experimental results show that the target parameter can be correctly calculated and these algorithms can be applied to actual systems.

Isogeometric analysis of free-form Timoshenko curved beams including the nonlinear effects of large deformations

In the present paper, the isogeometric analysis（IGA） of free-form planar curved beams is formulated based on the nonlinear Timoshenko beam theory to investigate the large deformation of beams with variable curvature. Based on the isoparametric concept, the shape functions of the field variables（displacement and rotation） in a finite element analysis are considered to be the same as the non-uniform rational basis spline（NURBS） basis functions defining the geometry. The validity of the presented formulation is tested in five case studies covering a wide range of engineering curved structures including from straight and constant curvature to variable curvature beams. The nonlinear deformation results obtained by the presented method are compared to well-established benchmark examples and also compared to the results of linear and nonlinear finite element analyses. As the nonlinear load-deflection behavior of Timoshenko beams is the main topic of this article, the results strongly show the applicability of the IGA method to the large deformation analysis of free-form curved beams. Finally, it is interesting to notice that, until very recently, the large deformations analysis of free-form Timoshenko curved beams has not been considered in IGA by researchers.

Study on Real-time Look-ahead and Adaptive Parametric Curve Interpolator

The principle of real-time look-ahead was introduced and analysed. An adaptive parametric curve interpolator with a real-time look-ahead function was developed for non-uniform rational B-spline (NURBS) curves interpolation, which considering the maximum acceleration/deceleration of the machine tool. In order to deal with the acceleration/deceleration around the feedrate sensitive corners, the look-ahead function was designed and illustrated. It can detect and adjust the feedrate adaptively. With the help of real-time look-ahead, the acceleration/deceleration can be limited to the range of the machine tool capacity. Thus, feedrate fluctuation is reduced. A NURBS curve interpolation experiment was provided to verify the feasibility and advantages of the proposed interpolator with a real-time look-ahead function.

Adaptive B-snake for planar curve approximation

An adaptive B-spline active contour model for planar curve approximation is proposed. Starting with an initial B-spline curve, the finite element method is adopted to make the active B-spline curve converge towards the target curve without the need of data points parameterization. A strategy of automatic control point insertion during the B-spline active contour deformation, adaptive to the shape of the planar curve, is also given. Experimental results show that this method is efficient and accurate in planar curve approximation.

On the plastic buckling of curved carbon nanotubes

This research,for the first time,predicts theoretically static stability response of a curved carbon nanotube(CCNT)under an elastoplastic behavior with several boundary conditions.The CCNT is exposed to axial compressive loads.The equilibrium equations are extracted regarding the Euler–Bernoulli displacement field by means of the principle of minimizing total potential energy.The elastoplastic stress-strain is concerned with Ramberg–Osgood law on the basis of deformation and flow theories of plasticity.To seize the nano-mechanical behavior of the CCNT,the nonlocal strain gradient elasticity theory is taken into account.The obtained differential equations are solved using the Rayleigh–Ritz method based on a new admissible shape function which is able to analyze stability problems.To authorize the solution,some comparisons are illustrated which show a very good agreement with the published works.Conclusively,the best findings confirm that a plastic analysis is crucial in predicting the mechanical strength of CCNTs.

On the Parametric Modeling of Turbine Blade Section Curve

Geometric parameters of the turbine blade are classified according to their destined functions, and the mathematical definition of those parameters in the section curve is introduced in detail. Some parts of the section curve shape can be adjusted freely, offering more flexibility to designers.

From Yang-Mills Photon in Curved Spacetime to Dark Energy Density

We start from quantum field theory in curved spacetime to derive a new Einstein-like energy mass relation of the type E=γmc2 where γ=1/22 is a Yang-Mills Lorentzian factor, m is the mass and c is the velocity of light. Although quantum field in curved spacetime is not a complete quantum gravity theory, our prediction here of 95.4545% dark energy missing in the cosmos is almost in complete agreement with the WMAP and supernova measurements. Finally, it is concluded that the WMAP and type 1a supernova 4.5% measured energy is the ordinary energy density of the quantum particle while the 95.5% missing dark energy is the energy density of the quantum wave. Recalling that measurement leads to quantum wave collapse, it follows that dark energy as given by E(D) = mc2 (21/22) cannot be detected using conventional direct measurement although its antigravity effect is manifested through the increasing rather than decreasing speed of cosmic expansion.