Using sucrose, citric acid and vitamin C as the basic liquid, different concentrations of 6-BA and B9 preservatives were added, and the carnation variety ＇ Master＇ was treated. The results showed that the formula of...Using sucrose, citric acid and vitamin C as the basic liquid, different concentrations of 6-BA and B9 preservatives were added, and the carnation variety ＇ Master＇ was treated. The results showed that the formula of 3% sucrose ＋ 50 mg/L citric acid ＋ 600 mg/L vitamin C ＋ 20 mg/L 6-BA could effectively maintain the water balance of the cut flower, prolong the vase life of the cut flower to 16.4 d, and maximize the flower diameter and the crown height.展开更多
以盆栽的C4植物-湖南稷子 Echinochloafrumentacea 为材料,用6-苄氨基嘌呤 BA 和脱落酸 ABA 定位涂抹湖南稷子的穗、上位和下位叶片,分析了植物体激素平衡的局部改变对整株水平上Na+、K+和游离脯氨酸分配的调节.实验结果表明,ABA和具有...以盆栽的C4植物-湖南稷子 Echinochloafrumentacea 为材料,用6-苄氨基嘌呤 BA 和脱落酸 ABA 定位涂抹湖南稷子的穗、上位和下位叶片,分析了植物体激素平衡的局部改变对整株水平上Na+、K+和游离脯氨酸分配的调节.实验结果表明,ABA和具有细胞分裂素活性的BA是调控Na+、K+及游离脯氨酸在不同层位叶中分配的重要因素.ABA涂抹湖南稷子的上位叶片,上位叶片中的Na+比其下位叶片高35.0%;用ABA涂抹湖南稷子的下位叶片,下位叶片中的K+比其上位叶片高31.4%,下位叶鞘中的K+比其上位叶鞘高53.7%.用BA涂抹湖南稷子的下位叶片,下位叶片中的K+和脯氨酸分别比其上位叶片高16.5%和31.7%;用BA或ABA定位涂抹植物地上不同部位,引起植物整株水平上Na+、K+向光合作用强的部位,特别是向活跃期的穗中选择性运输的能力增强,游离脯氨酸也多集中于代谢旺盛的光合器官和生殖器官.展开更多
通过甘氨酸硝酸盐法（GNP）合成了钙钛矿型Ba0.5Sr0.5Co0.8Fe0.2O3-δ（BSCF）复合氧化物粉体。经压制、烧结后,得到了BSCF烧结体试样,还通过硝酸溶液浸蚀处理对烧结体试样进行了表面浸蚀处理。采用X射线衍射仪（XRD）对煅烧后的粉体进...通过甘氨酸硝酸盐法（GNP）合成了钙钛矿型Ba0.5Sr0.5Co0.8Fe0.2O3-δ（BSCF）复合氧化物粉体。经压制、烧结后,得到了BSCF烧结体试样,还通过硝酸溶液浸蚀处理对烧结体试样进行了表面浸蚀处理。采用X射线衍射仪（XRD）对煅烧后的粉体进行了相成分分析;采用扫描电子显微镜（SEM）及能谱仪（EDS）对烧结体和表面浸蚀后烧结体样品的微观组织和成分进行了表征;对烧结体的致密度、电导率进行了测试分析,并在自制的氧渗透装置上测定了BSCF钙钛矿膜的透氧量,分析了温度和不同氧分压差等对膜透氧性能的影响。实验结果表明,甘氨酸-硝酸盐法所制备的前驱体粉末在900℃煅烧3 h后可获得具有单一钙钛矿结构的BSCF粉体,1100℃煅烧的BSCF烧结体的电导率在600℃时最大达到38.15 S·cm-1。其透氧量随着温度和氧分压差的升高而增大,且硝酸表面浸蚀处理后,BSCF膜片的透氧性能有明显提高,透氧速率提高1.6~4.5倍。850℃,20%O2-80%N2混合气体/He条件下,浸蚀后的透氧膜片的透氧量达到2.36 m L/cm2·min,而未浸蚀透氧膜片的透氧量仅为1.36 m L/cm2·min。展开更多
Ba0.5Sr0.5Co0.5Fe0.2O3-σ(BSCF), a new cathode material for solid oxide fuel cell (SOFC), was synthesized by polyacrylicacid (PAA) method. The lattice structures of samples calcined at different temperatures were char...Ba0.5Sr0.5Co0.5Fe0.2O3-σ(BSCF), a new cathode material for solid oxide fuel cell (SOFC), was synthesized by polyacrylicacid (PAA) method. The lattice structures of samples calcined at different temperatures were characterized by XRD, Shrinkage, porosity and pore size of the porous BSCF as a function of sintering temperature were investigated. It was found that the cubic perovskite structure could be formed after calcination at 800 ℃ for 2 h, but not well crystallized as seen from some unknown phases, and the pure cubic perovskite structure was formed after calcination at 1150 ℃ for 2 h. The panicle size of BSCF was less than 1-2 μm. The shrinkage of the porous BSCF increased with sintering temperature, but the opposite was true for the porosity. After sintering at 1100 ℃ for 4 h, the porous BSCF was still in an appropriate structure, with porosity of 29% and electrical conductivity above 400 S·cm^-1.展开更多
文摘Using sucrose, citric acid and vitamin C as the basic liquid, different concentrations of 6-BA and B9 preservatives were added, and the carnation variety ＇ Master＇ was treated. The results showed that the formula of 3% sucrose ＋ 50 mg/L citric acid ＋ 600 mg/L vitamin C ＋ 20 mg/L 6-BA could effectively maintain the water balance of the cut flower, prolong the vase life of the cut flower to 16.4 d, and maximize the flower diameter and the crown height.
文摘以盆栽的C4植物-湖南稷子 Echinochloafrumentacea 为材料,用6-苄氨基嘌呤 BA 和脱落酸 ABA 定位涂抹湖南稷子的穗、上位和下位叶片,分析了植物体激素平衡的局部改变对整株水平上Na+、K+和游离脯氨酸分配的调节.实验结果表明,ABA和具有细胞分裂素活性的BA是调控Na+、K+及游离脯氨酸在不同层位叶中分配的重要因素.ABA涂抹湖南稷子的上位叶片,上位叶片中的Na+比其下位叶片高35.0%;用ABA涂抹湖南稷子的下位叶片,下位叶片中的K+比其上位叶片高31.4%,下位叶鞘中的K+比其上位叶鞘高53.7%.用BA涂抹湖南稷子的下位叶片,下位叶片中的K+和脯氨酸分别比其上位叶片高16.5%和31.7%;用BA或ABA定位涂抹植物地上不同部位,引起植物整株水平上Na+、K+向光合作用强的部位,特别是向活跃期的穗中选择性运输的能力增强,游离脯氨酸也多集中于代谢旺盛的光合器官和生殖器官.
文摘通过甘氨酸硝酸盐法（GNP）合成了钙钛矿型Ba0.5Sr0.5Co0.8Fe0.2O3-δ（BSCF）复合氧化物粉体。经压制、烧结后,得到了BSCF烧结体试样,还通过硝酸溶液浸蚀处理对烧结体试样进行了表面浸蚀处理。采用X射线衍射仪（XRD）对煅烧后的粉体进行了相成分分析;采用扫描电子显微镜（SEM）及能谱仪（EDS）对烧结体和表面浸蚀后烧结体样品的微观组织和成分进行了表征;对烧结体的致密度、电导率进行了测试分析,并在自制的氧渗透装置上测定了BSCF钙钛矿膜的透氧量,分析了温度和不同氧分压差等对膜透氧性能的影响。实验结果表明,甘氨酸-硝酸盐法所制备的前驱体粉末在900℃煅烧3 h后可获得具有单一钙钛矿结构的BSCF粉体,1100℃煅烧的BSCF烧结体的电导率在600℃时最大达到38.15 S·cm-1。其透氧量随着温度和氧分压差的升高而增大,且硝酸表面浸蚀处理后,BSCF膜片的透氧性能有明显提高,透氧速率提高1.6~4.5倍。850℃,20%O2-80%N2混合气体/He条件下,浸蚀后的透氧膜片的透氧量达到2.36 m L/cm2·min,而未浸蚀透氧膜片的透氧量仅为1.36 m L/cm2·min。
文摘Ba0.5Sr0.5Co0.5Fe0.2O3-σ(BSCF), a new cathode material for solid oxide fuel cell (SOFC), was synthesized by polyacrylicacid (PAA) method. The lattice structures of samples calcined at different temperatures were characterized by XRD, Shrinkage, porosity and pore size of the porous BSCF as a function of sintering temperature were investigated. It was found that the cubic perovskite structure could be formed after calcination at 800 ℃ for 2 h, but not well crystallized as seen from some unknown phases, and the pure cubic perovskite structure was formed after calcination at 1150 ℃ for 2 h. The panicle size of BSCF was less than 1-2 μm. The shrinkage of the porous BSCF increased with sintering temperature, but the opposite was true for the porosity. After sintering at 1100 ℃ for 4 h, the porous BSCF was still in an appropriate structure, with porosity of 29% and electrical conductivity above 400 S·cm^-1.
