To design a propeller for ship power plant,the interaction between ship hull and propeller must be taken into account.The main concern is to apply the wake effect of ship stern on the propeller performance.In this pap...To design a propeller for ship power plant,the interaction between ship hull and propeller must be taken into account.The main concern is to apply the wake effect of ship stern on the propeller performance.In this paper,a coupled BEM(Boundary Element Method)/RANS(Renolds-Averaged Navier−Stokes)solver is used to simulate propeller behind the hull in the self-propulsion test.The motivation of this work is to develop a practical tool to design marine propulsion system without suffering long computational time.An unsteady boundary element method which is also known as panel method is chosen to estimate the propeller forces.Propeller wakes are treated using a time marching wake alignment method.Also,a RANS code coupled with VoF equation is developed to consider the ship motions and wake field effects in the problem.A coupling algorithm is developed to interchange ship wake field to the potential flow solver and propeller thrust to the RANS code.Based on the difference between hull resistance and the propeller thrust,a PI controller is developed to compute the propeller RPM in every time step.Verification of the solver is carried out using the towing tank test report of a 50 m oceanography research vessel.Wake factor and trust deduction coefficient are estimated numerically.Also,the wake rollup pattern of the propeller in open water is compared with the propeller in real wake field.展开更多
A three-dimensional mathematical hydrodynamic model associated with surface wave radiation by a floating rectangular box-type structure due to heave,sway,and roll motions in finite water depth is investigated based on...A three-dimensional mathematical hydrodynamic model associated with surface wave radiation by a floating rectangular box-type structure due to heave,sway,and roll motions in finite water depth is investigated based on small amplitude water wave theory and linear structural response.The analytical expressions for the radiation potentials,wave forces,and hydrodynamic coefficients are presented based on matched eigenfunction expansion method(MEFEM).The correctness of the analytical results of wave forces is compared with the construction of a numerical model using the open-source boundary element method code NEMOH.In addition,the present result is compared with the existing published experimental results available in the literature.The effects of the different design parameters on the floating box-type rectangular structure are studied by analyzing the vertical wave force,horizontal wave force,torque,added mass,and damping coefficients due to the heave,sway,and roll motions,and the comparison analysis between the forces is also analyzed in detail.Further,the effect of reflection and transmission coefficients by varying the structural width and drafts are analyzed.展开更多
In this study,we focus on the numerical modelling of the interaction between waves and submerged structures in the presence of a uniform flow current.Both the same and opposite senses of wave propagation are considere...In this study,we focus on the numerical modelling of the interaction between waves and submerged structures in the presence of a uniform flow current.Both the same and opposite senses of wave propagation are considered.The main objective is an understanding of the effect of the current and various geometrical parameters on the reflection coefficient.The wave used in the study is based on potential theory,and the submerged structures consist of two rectangular breakwaters positioned at a fixed distance from each other and attached to the bottom of a wave flume.The numerical modeling approach employed in this work relies on the Boundary Element Method(BEM).The results are compared with experimental data to validate the approach.The findings of the study demonstrate that the double rectangular breakwater configuration exhibits superior wave attenuation abilities if compared to a single rectangular breakwater,particularly at low wavenumbers.Furthermore,the study reveals that wave mitigation is more pronounced when the current and wave propagation are coplanar,whereas it is less effective in the case of opposing current.展开更多
The heating,ventilating,and air conditioning(HVAC)system consumes nearly 50%of the building’s energy,especially in Taiwan with a hot and humid climate.Due to the challenges in obtaining energy sources and the negativ...The heating,ventilating,and air conditioning(HVAC)system consumes nearly 50%of the building’s energy,especially in Taiwan with a hot and humid climate.Due to the challenges in obtaining energy sources and the negative impacts of excessive energy use on the environment,it is essential to employ an energy-efficient HVAC system.This study conducted the machine tools building in a university.The field measurement was carried out,and the data were used to conduct energymodelling with EnergyPlus(EP)in order to discover some improvements in energy-efficient design.The validation between fieldmeasurement and energymodelling was performed,and the error rate was less than 10%.The following strategies were proposed in this study based on several energy-efficient approaches,including room temperature settings,chilled water supply temperature settings,chiller coefficient of performance(COP),shading,and building location.Energy-efficient approaches have been evaluated and could reduce energy consumption annually.The results reveal that the proposed energy-efficient approaches of room temperature settings(3.8%),chilled water supply temperature settings(2.1%),chiller COP(5.9%),using shading(9.1%),and building location(3.0%),respectively,could reduce energy consumption.The analysis discovered that using a well-performing HVAC system and building shading were effective in lowering the amount of energy used,and the energy modelling method could be an effective and satisfactory tool in determining potential energy savings.展开更多
The photovoltaic module building integration level affects the module temperature and,consequently,its output power.In this work,a methodology has been proposed to estimate the influence of the level of architectural ...The photovoltaic module building integration level affects the module temperature and,consequently,its output power.In this work,a methodology has been proposed to estimate the influence of the level of architectural photovoltaic integration on the photovoltaic energy balance with natural ventilation or with forced cooling systems.The developed methodology is applied for five photovoltaic module technologies(m⁃Si,p⁃Si,a⁃Si,CdTe,and CIGS)on four characteristic locations(Athens,Davos,Stockholm,and Würzburg).To this end,a photovoltaic module thermal radiation parameter,PVj,is introduced in the characterization of the PV module technology,rendering the correlations suitable for building⁃integrated photovoltaic(BIPV)applications,with natural ventilation or with forced cooling systems.The results show that PVj has a significant influence on the energy balances,according to the architectural photovoltaic integration and climatic conditions.Keywords:Photovoltaic cooling;BIPV;Photovoltaic;Ventilation;Photovoltaic integration level in building【OA】(2)Graph⁃Based methodology for Multi⁃Scale generation of energy analysis models from IFC,by Asier Mediavilla,Peru Elguezabal,Natalia Lasarte,Article 112795 Abstract:Process digitalisation and automation is unstoppable in all industries,including construction.However,its widespread adoption,even for non⁃experts,demands easy⁃to⁃use tools that reduce technical requirements.BIM to BEM(Building Energy Models)workflows are a clear example,where ad⁃hoc prepared models are needed.This paper describes a methodology,based on graph techniques,to automate it by highly reducing the input BIM requirements found in similar approaches,being applicable to almost any IFC.This is especially relevant in retrofitting,where reality capture tools(e.g.,3D laser scanning,object recognition in drawings)are prone to create geometry clashes and other inconsistencies,posing higher challenges for automation.Another innovation presented is its multi⁃scale nature,efficiently addressing the surroundings impact in the energy model.The application to selected test cases has been successful and further tests are ongoing,considering a higher variety of BIM models in relation to tools and techniques used and model sizes.展开更多
文摘To design a propeller for ship power plant,the interaction between ship hull and propeller must be taken into account.The main concern is to apply the wake effect of ship stern on the propeller performance.In this paper,a coupled BEM(Boundary Element Method)/RANS(Renolds-Averaged Navier−Stokes)solver is used to simulate propeller behind the hull in the self-propulsion test.The motivation of this work is to develop a practical tool to design marine propulsion system without suffering long computational time.An unsteady boundary element method which is also known as panel method is chosen to estimate the propeller forces.Propeller wakes are treated using a time marching wake alignment method.Also,a RANS code coupled with VoF equation is developed to consider the ship motions and wake field effects in the problem.A coupling algorithm is developed to interchange ship wake field to the potential flow solver and propeller thrust to the RANS code.Based on the difference between hull resistance and the propeller thrust,a PI controller is developed to compute the propeller RPM in every time step.Verification of the solver is carried out using the towing tank test report of a 50 m oceanography research vessel.Wake factor and trust deduction coefficient are estimated numerically.Also,the wake rollup pattern of the propeller in open water is compared with the propeller in real wake field.
基金the project Hydroelastic behaviour of horizontal flexible floating structures for applications to Floating Breakwaters and Wave Energy Converters(HYDROELASTWEB),which is co-funded by the European Regional Development Fund(Fundo Europeu de Desenvolvimento Regional-FEDER)by the Portuguese Foundation for Science and Technology(Funda??o para a Ciência e a Tecnologia-FCT)under contract 031488_770(PTDC/ECI-EGC/31488/2017)+1 种基金a Researcher by FCT,through Scientific Employment Stimulus,Individual support under Contract No.CEECIND/04879/2017the Strategic Research Plan of the Centre for Marine Technology and Ocean Engineering(CENTEC),which is financed by the Portuguese Foundation for Science and Technology(Funda??o para a Ciência e Tecnologia-FCT)under contract UIDB/UIDP/00134/2020。
文摘A three-dimensional mathematical hydrodynamic model associated with surface wave radiation by a floating rectangular box-type structure due to heave,sway,and roll motions in finite water depth is investigated based on small amplitude water wave theory and linear structural response.The analytical expressions for the radiation potentials,wave forces,and hydrodynamic coefficients are presented based on matched eigenfunction expansion method(MEFEM).The correctness of the analytical results of wave forces is compared with the construction of a numerical model using the open-source boundary element method code NEMOH.In addition,the present result is compared with the existing published experimental results available in the literature.The effects of the different design parameters on the floating box-type rectangular structure are studied by analyzing the vertical wave force,horizontal wave force,torque,added mass,and damping coefficients due to the heave,sway,and roll motions,and the comparison analysis between the forces is also analyzed in detail.Further,the effect of reflection and transmission coefficients by varying the structural width and drafts are analyzed.
文摘In this study,we focus on the numerical modelling of the interaction between waves and submerged structures in the presence of a uniform flow current.Both the same and opposite senses of wave propagation are considered.The main objective is an understanding of the effect of the current and various geometrical parameters on the reflection coefficient.The wave used in the study is based on potential theory,and the submerged structures consist of two rectangular breakwaters positioned at a fixed distance from each other and attached to the bottom of a wave flume.The numerical modeling approach employed in this work relies on the Boundary Element Method(BEM).The results are compared with experimental data to validate the approach.The findings of the study demonstrate that the double rectangular breakwater configuration exhibits superior wave attenuation abilities if compared to a single rectangular breakwater,particularly at low wavenumbers.Furthermore,the study reveals that wave mitigation is more pronounced when the current and wave propagation are coplanar,whereas it is less effective in the case of opposing current.
基金support by the Ministry of Science and Technology under Grant No.MOST 108-2622-E-169-006-CC3.
文摘The heating,ventilating,and air conditioning(HVAC)system consumes nearly 50%of the building’s energy,especially in Taiwan with a hot and humid climate.Due to the challenges in obtaining energy sources and the negative impacts of excessive energy use on the environment,it is essential to employ an energy-efficient HVAC system.This study conducted the machine tools building in a university.The field measurement was carried out,and the data were used to conduct energymodelling with EnergyPlus(EP)in order to discover some improvements in energy-efficient design.The validation between fieldmeasurement and energymodelling was performed,and the error rate was less than 10%.The following strategies were proposed in this study based on several energy-efficient approaches,including room temperature settings,chilled water supply temperature settings,chiller coefficient of performance(COP),shading,and building location.Energy-efficient approaches have been evaluated and could reduce energy consumption annually.The results reveal that the proposed energy-efficient approaches of room temperature settings(3.8%),chilled water supply temperature settings(2.1%),chiller COP(5.9%),using shading(9.1%),and building location(3.0%),respectively,could reduce energy consumption.The analysis discovered that using a well-performing HVAC system and building shading were effective in lowering the amount of energy used,and the energy modelling method could be an effective and satisfactory tool in determining potential energy savings.
文摘The photovoltaic module building integration level affects the module temperature and,consequently,its output power.In this work,a methodology has been proposed to estimate the influence of the level of architectural photovoltaic integration on the photovoltaic energy balance with natural ventilation or with forced cooling systems.The developed methodology is applied for five photovoltaic module technologies(m⁃Si,p⁃Si,a⁃Si,CdTe,and CIGS)on four characteristic locations(Athens,Davos,Stockholm,and Würzburg).To this end,a photovoltaic module thermal radiation parameter,PVj,is introduced in the characterization of the PV module technology,rendering the correlations suitable for building⁃integrated photovoltaic(BIPV)applications,with natural ventilation or with forced cooling systems.The results show that PVj has a significant influence on the energy balances,according to the architectural photovoltaic integration and climatic conditions.Keywords:Photovoltaic cooling;BIPV;Photovoltaic;Ventilation;Photovoltaic integration level in building【OA】(2)Graph⁃Based methodology for Multi⁃Scale generation of energy analysis models from IFC,by Asier Mediavilla,Peru Elguezabal,Natalia Lasarte,Article 112795 Abstract:Process digitalisation and automation is unstoppable in all industries,including construction.However,its widespread adoption,even for non⁃experts,demands easy⁃to⁃use tools that reduce technical requirements.BIM to BEM(Building Energy Models)workflows are a clear example,where ad⁃hoc prepared models are needed.This paper describes a methodology,based on graph techniques,to automate it by highly reducing the input BIM requirements found in similar approaches,being applicable to almost any IFC.This is especially relevant in retrofitting,where reality capture tools(e.g.,3D laser scanning,object recognition in drawings)are prone to create geometry clashes and other inconsistencies,posing higher challenges for automation.Another innovation presented is its multi⁃scale nature,efficiently addressing the surroundings impact in the energy model.The application to selected test cases has been successful and further tests are ongoing,considering a higher variety of BIM models in relation to tools and techniques used and model sizes.