Glasses are known to possess low-frequency excess modes beyond the Debye prediction.For decades,it has been assumed that evolution of low-frequency density of excess modes D(ω) with frequency ω follows a power-law s...Glasses are known to possess low-frequency excess modes beyond the Debye prediction.For decades,it has been assumed that evolution of low-frequency density of excess modes D(ω) with frequency ω follows a power-law scaling:D(ω)~ω~γ.However,it remains debated on the value of γ at low frequencies below the first phonon-like mode in finitesize glasses.Early simulation studies reported γ=4 at low frequencies in two-(2D),three-(3D),and four-dimensional(4D)glasses,whereas recent observations in 2D and 3D glasses suggested γ=3.5 in a lower-frequency regime.It is uncertain whether the low-frequency scaling of D(ω)~ω^(3.5) could be generalized to 4D glasses.Here,we conduct numerical simulation studies of excess modes at frequencies below the first phonon-like mode in 4D model glasses.It is found that the system size dependence of D(ω) below the first phonon-like mode varies with spatial dimensions:D(ω) increases in2D glasses but decreases in 3D and 4D glasses as the system size increases.Furthermore,we demonstrate that the ω^(3.5)scaling,rather than the ω~4 scaling,works in the lowest-frequency regime accessed in 4D glasses,regardless of interaction potentials and system sizes examined.Therefore,our findings in 4D glasses,combined with previous results in 2D and 3D glasses,suggest a common low-frequency scaling of D(ω)~ ω^3.5) below the first phonon-like mode across different spatial dimensions,which would inspire further theoretical studies.展开更多
The AEC (Architecture, Engineering, and Construction) industry is gradually shifting away from 2D CAD drawings and toward Building Information Modeling as a result of the fast development of science and technology (BI...The AEC (Architecture, Engineering, and Construction) industry is gradually shifting away from 2D CAD drawings and toward Building Information Modeling as a result of the fast development of science and technology (BIM). The BIM idea’s introduction emphasizes the need to specify a building in a single building model with adequate information to suit its different needs rather than defining it in fragmented documents. This research work aims to use the BIM 4D for the simulation of the construction sequence of a Swivel Bridge. For that, the software Revit was used to make the 3D model of the bridge, and the software Navisworks was used for the 4D construction simulation of the project. The results demonstrated that BIM technology could help reduce delays and problems with the schedule and improve communication among stakeholders, and BIM visualization and simulation features were very useful compared to traditional planning methods.展开更多
Despite the fact that applying constructability concepts in building designs have led to savings estimated within a range of 1% to 14% of the capital cost, the construction industry still lacks an advanced tool to ass...Despite the fact that applying constructability concepts in building designs have led to savings estimated within a range of 1% to 14% of the capital cost, the construction industry still lacks an advanced tool to assess and check for constructability implementations in designs. Therefore, the objective of this research is to propose a quantitative assessment of building constructability, which transforms the subjective assessment of constructability knowledge to a quantified value so that it is easy to analyze and improve building design. The proposed methodology uses the advancement of object oriented Building Information Model (BIM) and 4D simulation model to serve as a data repository models for the constructability assessment platform. Factors affecting constructability of building designs have been identified and relatively weighted using Analytical Hierarchy Process (AHP) technique based on a questionnaire survey collected throughout the Canadian provinces. Evaluation criteria are also developed to assist the designer to evaluate the design proposals. The outcome shows that the proposed method provides the designer an accurate and faster mode in evaluating project constructability by using the parametric features from BIM and taking the advantage of spatial relationship between building components.展开更多
We focus on the goal of undergraduate talent training,consider the course features of Road Engineering Construction Technology and Organization,analyze the problems existing in the practical teaching of the course,use...We focus on the goal of undergraduate talent training,consider the course features of Road Engineering Construction Technology and Organization,analyze the problems existing in the practical teaching of the course,use the advantages of BIM+virtual simulation technology,design a scientific and reasonable practical teaching content of Road Engineering Construction Technology and Organization,and address the contrast between the strong practical aspect of the traditional Road Engineering Construction Technology and Organization course and the lack of practical instruments in hope to improve students’learning autonomy,enhance the quality of practical teaching,achieve the training objectives of the course,and nurture applied technical talents.展开更多
Accurate forecast of rainstorms associated with the mei-yu front has been an important issue for the Chinese economy and society. In July 1998 a heavy rainstorm hit the Yangzi River valley and received widespread atte...Accurate forecast of rainstorms associated with the mei-yu front has been an important issue for the Chinese economy and society. In July 1998 a heavy rainstorm hit the Yangzi River valley and received widespread attention from the public because it caused catastrophic damage in China. Several numerical studies have shown that many forecast models, including Pennsylvania State University National Center for Atmospheric Research’s fifth-generation mesoscale model （MM5）, failed to simulate the heavy precipitation over the Yangzi River valley. This study demonstrates that with the optimal initial conditions from the dimension-reduced projection four-dimensional variational data assimilation （DRP-4DVar） system, MM5 can successfully reproduce these observed rainfall amounts and can capture many important mesoscale features, including the southwestward shear line and the low-level jet stream. The study also indicates that the failure of previous forecasts can be mainly attributed to the lack of mesoscale details in the initial conditions of the models.展开更多
基金the support from the National Natural Science Foundation of China(Grant Nos.12374202 and 12004001)Anhui Projects(Grant Nos.2022AH020009,S020218016,and Z010118169)Hefei City(Grant No.Z020132009)。
文摘Glasses are known to possess low-frequency excess modes beyond the Debye prediction.For decades,it has been assumed that evolution of low-frequency density of excess modes D(ω) with frequency ω follows a power-law scaling:D(ω)~ω~γ.However,it remains debated on the value of γ at low frequencies below the first phonon-like mode in finitesize glasses.Early simulation studies reported γ=4 at low frequencies in two-(2D),three-(3D),and four-dimensional(4D)glasses,whereas recent observations in 2D and 3D glasses suggested γ=3.5 in a lower-frequency regime.It is uncertain whether the low-frequency scaling of D(ω)~ω^(3.5) could be generalized to 4D glasses.Here,we conduct numerical simulation studies of excess modes at frequencies below the first phonon-like mode in 4D model glasses.It is found that the system size dependence of D(ω) below the first phonon-like mode varies with spatial dimensions:D(ω) increases in2D glasses but decreases in 3D and 4D glasses as the system size increases.Furthermore,we demonstrate that the ω^(3.5)scaling,rather than the ω~4 scaling,works in the lowest-frequency regime accessed in 4D glasses,regardless of interaction potentials and system sizes examined.Therefore,our findings in 4D glasses,combined with previous results in 2D and 3D glasses,suggest a common low-frequency scaling of D(ω)~ ω^3.5) below the first phonon-like mode across different spatial dimensions,which would inspire further theoretical studies.
文摘The AEC (Architecture, Engineering, and Construction) industry is gradually shifting away from 2D CAD drawings and toward Building Information Modeling as a result of the fast development of science and technology (BIM). The BIM idea’s introduction emphasizes the need to specify a building in a single building model with adequate information to suit its different needs rather than defining it in fragmented documents. This research work aims to use the BIM 4D for the simulation of the construction sequence of a Swivel Bridge. For that, the software Revit was used to make the 3D model of the bridge, and the software Navisworks was used for the 4D construction simulation of the project. The results demonstrated that BIM technology could help reduce delays and problems with the schedule and improve communication among stakeholders, and BIM visualization and simulation features were very useful compared to traditional planning methods.
文摘Despite the fact that applying constructability concepts in building designs have led to savings estimated within a range of 1% to 14% of the capital cost, the construction industry still lacks an advanced tool to assess and check for constructability implementations in designs. Therefore, the objective of this research is to propose a quantitative assessment of building constructability, which transforms the subjective assessment of constructability knowledge to a quantified value so that it is easy to analyze and improve building design. The proposed methodology uses the advancement of object oriented Building Information Model (BIM) and 4D simulation model to serve as a data repository models for the constructability assessment platform. Factors affecting constructability of building designs have been identified and relatively weighted using Analytical Hierarchy Process (AHP) technique based on a questionnaire survey collected throughout the Canadian provinces. Evaluation criteria are also developed to assist the designer to evaluate the design proposals. The outcome shows that the proposed method provides the designer an accurate and faster mode in evaluating project constructability by using the parametric features from BIM and taking the advantage of spatial relationship between building components.
基金the Chongqing Engineering College Educational Teaching Reform Research Project“Practical Teaching Research of Road Engineering Construction Technology and Organization Course Based on BIM+Virtual Simulation Technology”(Project No.JY2021310).
文摘We focus on the goal of undergraduate talent training,consider the course features of Road Engineering Construction Technology and Organization,analyze the problems existing in the practical teaching of the course,use the advantages of BIM+virtual simulation technology,design a scientific and reasonable practical teaching content of Road Engineering Construction Technology and Organization,and address the contrast between the strong practical aspect of the traditional Road Engineering Construction Technology and Organization course and the lack of practical instruments in hope to improve students’learning autonomy,enhance the quality of practical teaching,achieve the training objectives of the course,and nurture applied technical talents.
基金the National Basic Research Program (973 Program) (No.2010CB 951604)the China Meteorological Administration for the R&D Special Fund for Public Welfare Industry (meteorology) [Grant No. GYHY(QX)200906009]+1 种基金the National High Technology Research and Development Program of China (863 Program) (No. 2010AA012304)the LASG free exploration fund
文摘Accurate forecast of rainstorms associated with the mei-yu front has been an important issue for the Chinese economy and society. In July 1998 a heavy rainstorm hit the Yangzi River valley and received widespread attention from the public because it caused catastrophic damage in China. Several numerical studies have shown that many forecast models, including Pennsylvania State University National Center for Atmospheric Research’s fifth-generation mesoscale model （MM5）, failed to simulate the heavy precipitation over the Yangzi River valley. This study demonstrates that with the optimal initial conditions from the dimension-reduced projection four-dimensional variational data assimilation （DRP-4DVar） system, MM5 can successfully reproduce these observed rainfall amounts and can capture many important mesoscale features, including the southwestward shear line and the low-level jet stream. The study also indicates that the failure of previous forecasts can be mainly attributed to the lack of mesoscale details in the initial conditions of the models.
