Hydrophobic interaction membrane chromatography for bioseparation and responsive polymer ligands involved

Hydrophobic interaction chromatography （HIC） is a rapid growing bioseparation technique, which separates biomolecules, such as therapeutic proteins and antibodys, based on the reversible hydrophobic interaction between immobilized hydrophobic ligands on chromatographic resin spheres and non-polar regions of solute molecule. In this review, the fundamental concepts of HIC and the factors that may affect purification efficiency of HIC is summarized, followed by the comparison of HIC with affinity chromatography and ion-exchange chromatography. Hydrophobic interaction membrane chromatography （HIMC） combines the advantages of HIC and membrane process and has showed great potential in bioseparation. For better understanding of HIMC, this review presents an overview of two main concerns about HIMC, i.e. membrane materials and hydrophobic ligands. Specifically, cellulose fiber-based membrane substrate and environment-responsive ligands are emphasized.

Use of biopolymers in wastewater treatment:A brief review of current trends and prospects

Indeed,polymeric materials have thrived in worldwide sectors over the last five decades due to their versatility and durability,to the point that we can no longer envisage a product that does not contain them.However,many synthetic polymers that have been produced are mostly sourced from petroleum and coal as raw materials,making them environmentally incompatible because they cannot be integrated with what is a natural recycling system.One of the most important aspects of the transition to a circular bioeconomy(CBE)is the provision of more sustainable strategies for resource and waste management.Considering the environmental consequences associated with petroleum-based polymers(PBPs),natural biopolymers,originating from biomass,can be conceived as a promising solution to gradually replace the PBPs,and address,and resolve the potential challenges and prevailing research gaps in the PBPs.The biopolymers have significant advantages over PBPs in terms of low-cost/zero-cost precursors,environmental friendliness,and user-friendliness.The present review dissects the sources,synthesis pathways,structures,characterization,and employment of biopolymers and their composites in water and wastew-ater treatment applications via different scenarios.Furthermore,the CBE model framework proposes potential approaches to applying CBE principles in the wastewater management sector,with a heavy emphasis on not only technology but also organizational and societal reforms.To sum up,the reliance on biopolymers can be considered a crucial tool for assessing the global progress toward CBE,as well as future environmental management and planning.

The growth of biopolymers and natural earthen sources as membrane/separator materials for microbial fuel cells:A comprehensive review

Microbial fuel cell(MFC)technology has emerged as an effective solution for energy insecurity and bioremediation.However,identifying suitable components(particularly separators or membranes)with the required properties,such as low cost and high performance,remains challenging and restricts practical application.Commercial membranes,such as Nafion,exhibit excellent performance in MFC.However,these membranes have high production costs,which considerably increase the overall MFC unit cell cost.Among the numerous types,the separators or membranes developed from biopolymers and naturally occurring earthen sources have proven to be a novel and efficient concept due to their natural abundance,cost-effectiveness(approximately$20 m^(-2),$5 m^(-2),and$1 kg-1for biopolymers,ceramics,and earthensources,respectively),structural properties,proton transportation,manufacturing and modification ease,and environmental friendliness.In this review,we emphasize cost-effective renewable green materials(biopolymers,bio-derived materials,and naturally occurring soil,clay,ceramics or minerals)for MFC applications for the first time.Biopolymers with good thermal,mechanical,and water retention properties,sustainability,and environmental friendliness,such as cellulose and chitosan,are typically preferred.Furthermore,the modification or introduction of various functional groups in biopolymers to enhance their functional properties and scale MFC power density is explored.Subsequently,separator/membrane development using various bio-sources(such as coconut shells,banana peels,chicken feathers,and tea waste ash)is described.Additionally,naturally occurring sources such as clay,montmorillonite,and soils(including red,black,rice-husk,and Kalporgan soil)for MFC were reviewed.In conclusion,the existing gap in MFC technology was filled by providing recommendations for future aspects based on the barriers in cost,environment,and characteristics.

Smart membranes for biomedical applications

Smart membranes with tunable permeability and selectivity have drawn widespread attention because of their unique biomimetic characteristics.Constructed by incorporating various stimuli-responsive materials into membrane substrates,smart membranes could self-adjust their physical/chemical properties(such as pore size and surface properties)in response to environmental signals such as temperature,pH,light,magnetic field,electric field,redox and specific ions/molecules.Such smart membranes show great prospects in biomedical applications ranging from controlled drug release to bioseparation and tissue engineering.In this review,three controlled release models realized by different designed smart membranes are emphatically introduced,and then smart membranes for biological separation and controlled cell culture are introduced and discussed respectively.At last,the existing challenges of smart membranes for biomedical applications are briefly summarized,and future research topics are suggested.

Ionic liquid-based salting-out extraction of bio-chemicals

Ionic liquids(ILs)are known as green solvents,and have been widely used in the dissolution and transformation of biopolymers,the extraction of bioactive compounds and metal ions,and the capture of SO2 or CO2.However,less attention was given to the separation of bio-based chemicals,such as diols and organic acids.Bio-based chemicals can be efficiently separated by organic solvent-based salting-out extraction(SOE)from fermentation broths,while organic solvents are normally unfriendly to environment and process safety in commercialized production due to their toxicity or/and flammability.In recent years,the IL-based SOE system has been explored in the separation of bio-based chemicals as an alternative of organic solvent-based SOE system.In this review,the progress of IL-based SOE of biobased chemicals has been summarized,including the effect of ILs structure on the formation of aqueous two phases,and the influences of ILs structure and concentration,temperature and pH on the partition behaviors of target products and ILs as well as removal of impurities.Most of bio-based chemicals could be distributed into the IL-rich phase with high recovery,while the partition behaviors of bio-based chemicals are sometimes different from that in organic solvent-based SOE systems.Although the results of ILbased SOE are promising,further studies are still required in the increased selectivity of target products over by-products,recovery and recycling of ILs,and the separation between ILs and bio-based chemicals.Additionally,three kinds of integrated bioprocesses would be developed on basis of utilization of ILs as extractant for SOE,catalyst for condensation reaction and solvent for pretreatment of lignocellulose.

Selective Removal of Low-Density Lipoproteins from Blood by Induced Precipitation with AAS in Vitro(Ⅰ)

1 INTRODUCTION It’s evident that high level of cholesterol in blood is associated with the formation and devel-opment of familial hypercholestrolemia(FH)and atherosclerosis(AS).In general,choles-terol in blood is mainly combined with low-density lipoproteins(LDL),very low-densitylipoproteins(VLDL)and high density lipoproteins(HDL).About 60%-80% cholesterolexists in LDL and VLDL.LDL and VLDL have been recognized as the principal

Ethanol shock enhances the recovery of anthocyanin from lowbush blueberry

Deactivation of polyphenol oxidase(PPO)in natural products is essential for downstream processing of functional molecules used as food or food additives,particularly those served as antioxidants.In the present work,we identified two proteins with PPO activity from lowbush blueberry using ammonium sulphate precipitation and chromatography procedures.Deactivation of these proteins was studied using aqueous solutions of ethanol of different concentrations.The PPO activity was recovered after ethanol removal for the protein samples previously soaked in a lowconcentration ethanol solution.A complete and unrecoverable deactivation of the proteins was achieved using ethanol with concentration over 70%(v/v),as manifested by the significant changes in circular dichroism(CD)and fluorescence spectroscopy measurements.Based on these findings,we propose a new extraction process for blueberry anthocyanin,in which an ethanol shock,i.e.soaking blueberry fruit in a 70%(v/v)ethanol solution for 1 h,is implemented before subsequent procedures.This new process increases the anthocyanin yield by 55%in comparison to that without the ethanol shock.

Preparation of magnetic iron/mesoporous silica composite spheres and their use in protein immobilization

The iron/silica magnetic composite spheres were prepared by electrochemical method and reduced in hydrogen atmosphere at different temperatures. The morphology and structure of the composite were characterized by SEM, TEM and XRD. The iron/silica microspheres exhibit essential ferromagnetic behavior characterized by magnetometry. After being coated with silica in sodium silicate solution by acidifying technology, the surface of these magnetic composite spheres is with amino-silane coupling agent for their attachment to affinity ligands. Bovine serum albumin (BSA) was covalently immobilized onto the amino-silane modified magnetic silica supports by the glutaraldehyde method. The influence of pH, ionic strength as well as the initial protein concentration on BSA immobilization was studied. The results show that such amino-silane modified magnetic composite spheres are the effective supports for bioseparation and the maximum BSA immobilization capacity (up to 87.4 mg/g) is obtained in 0.1 mol/L phosphate buffer at pH 5.0.

RIGID GIGAPOROUS CHROMATOGRAPHIC MEDIA AND THEIR POTENTIAL IMPACT ON DOWNSTREAM PROCESSING

More and more biomolecules are being produced by the biotechnology industry for applications ranging from medicine and food to engineering materials. Liquid chromatography plays a center-stage role in a typical downstream process producing biomolecules such as recombinant proteins. Rigid gigaporous media are porous particles possessing large transecting through-pores with a pore-to-particle diameter ratio of dpore/dparticle〉 0.01. They allow convective flow in the large through-pores, while the smaller diffusion-pores （typically several hundred angstroms in size） supply the needed surface areas. Because of the transecting gigapores, a portion of the mobile phase flows through the pores in addition to fluid flow in the interstitial spaces between the particles in a packed-bed column. This considerably lowers the operating column pressure drop. This lower pressure drop makes axial-direction scale-up of chromatographic columns possible to avoid pancake columns that invariably degrade separation resolution. The large gigapores also make the binding sites on the diffusion pore surfaces more accessible, thus increasing the loading capacity of large protein molecules that can be hindered sterically if only diffusion pores are present. This work discusses the development of rigid gigaporous media and their potential impact on the design of multi-stage downstream process from the angle of multi-scale analysis.

Antioxidant activity of phlorotannins from brown algae

The antioxidant activity of the phlorotannins extracted from five marine algaespecies(Saccharina latissima,Alaria esculenta,Laminaria digitata,Fucus vesiculosusand Ascophyllum nodosum)was studied.Three phlorotannin groups,including soluble,membrane-bound,and extracted membrane-bound phlorotannins obtained by two solvent extraction methods were investigated for their DPPH radical scavenging activity.F.vesiculosusand A.nodosumshowed the highest phlorotannin yield(14.83 mg-extract/g-algae and 12.80 mg-extract/g-algae,respectively)among the five algaespecies.Their soluble phlorophannin(SP),membrane-bound phlorotannin(MP)and extracted membrane-bound phlorotannin(eMP)extracts all showed equal or greater DPPH radical scavenging activity than the commercial antioxidants of butylated hydroxytoluene and ascorbic acid.The antioxidant potential that combines phlorotannin yield and antioxidant activity of the MP extracts of F.vesiculosusand A.nodosum(5890mL/g and 5278 mL/g algae,respectively)were higher than those of SP and eMP,suggesting that the MPs of F.vesiculosusand A.nodosumhad great potential to be used as antioxidants.Different extraction methods also showed significantly different effects on the antioxidant activity of the phlorotannin extracts.