改进BP网络法同时测定撒痛风注射液中的三组分

本文利用改进ＢＰ网络法同时测定了撒痛风注射液中的三组分，考察了网络拓扑模型对于分析结果和计算能力的影响，最后选择了合适的网络参数，对模拟样品中的三组分进行了同时测定，其中水杨酸钠，咖啡因和安替比林的平均回收率分别为１００．０７％，１００．０８％，９９．９４％，标准偏差分别为０．０３，０．６２，０．０８．同时与Ｋａｌｍａｎ滤波法进行了比较，结果表明本文方法更为满意．

The Application of BP Networks to Land Suitability Evaluation

The back propagation (BP) model of artificial neural networks (ANN) has many good qualities comparing with ordinary methods in land suitability evaluation.Through analyzing ordinary methods’ limitations,some sticking points of BP model used in land evaluation,such as network structure,learning algorithm,etc.,are discussed in detail,The land evaluation of Qionghai city is used as a case study.Fuzzy comprehensive assessment method was also employed in this evaluation for validating and comparing.

Circle BP Algorithm for MLP Neural Network

A simple new BP algorithm named circle BP algorithm is introduced.With this algorithm,local minimums can be completely got rid of and learning speed can improve dramatically.It can be easily designed into the circuitry and advance further the application of MLP neural network .

Research on BP Neural Network Algorithm Based on Quasi- Newton Method

With more and more researches about improving BP algorithm, there are more improvement methods. The paper researches two improvement algorithms based on quasi-Newton method, DFP algorithm and L-BFGS algorithm. After fully analyzing the features of quasi- Newton methods, the paper improves BP neural network algorithm. And the adjustment is made for the problems in the improvement process. The paper makes empirical analysis and proves the effectiveness of BP neural network algorithm based on quasi-Newton method. The improved algorithms are compared with the traditional BP algorithm, which indicates that the imoroved BP algorithm is better.

Inversion of 3D density interface with PSO-BP method

BP( Back Propagation) neural network and PSO( Particle Swarm Optimization) are two main heuristic optimization methods,and are usually used as nonlinear inversion methods in geophysics. The authors applied BP neural network and BP neural network optimized with PSO into the inversion of 3D density interface respectively,and a comparison was drawn to demonstrate the inversion results. To start with,a synthetic density interface model was created and we used the proceeding inversion methods to test their effectiveness. And then two methods were applied into the inversion of the depth of Moho interface. According to the results,it is clear to find that the application effect of PSO-BP is better than that of BP network. The BP network structures used in both synthetic and field data are consistent in order to obtain preferable inversion results. The applications in synthetic and field tests demonstrate that PSO-BP is a fast and effective method in the inversion of 3D density interface and the optimization effect is evident compared with BP neural network merely,and thus,this method has practical value.

Sub-pixel mapping method based on BP neural network

A new sub-pixel mapping method based on BP neural network is proposed in order to determine the spatial distribution of class components in each mixed pixel.The network was used to train a model that describes the relationship between spatial distribution of target components in mixed pixel and its neighboring information.Then the sub-pixel scaled target could be predicted by the trained model.In order to improve the performance of BP network,BP learning algorithm with momentum was employed.The experiments were conducted both on synthetic images and on hyperspectral imagery(HSI).The results prove that this method is capable of estimating land covers fairly accurately and has a great superiority over some other sub-pixel mapping methods in terms of computational complexity.

Development of viscosity model for aluminum alloys using BP neural network

Viscosity is one of the important thermophysical properties of liquid aluminum alloys,which influences the characteristics of mold filling and solidification and thus the quality of castings.In this study,315 sets of experimental viscosity data collected from the literatures were used to develop the viscosity prediction model.Back-propagation(BP)neural network method was adopted,with the melt temperature and mass contents of Al,Si,Fe,Cu,Mn,Mg and Zn solutes as the model input,and the viscosity value as the model output.To improve the model accuracy,the influence of different training algorithms and the number of hidden neurons was studied.The initial weight and bias values were also optimized using genetic algorithm,which considerably improve the model accuracy.The average relative error between the predicted and experimental data is less than 5%,confirming that the optimal model has high prediction accuracy and reliability.The predictions by our model for temperature-and solute content-dependent viscosity of pure Al and binary Al alloys are in very good agreement with the experimental results in the literature,indicating that the developed model has a good prediction accuracy.

Prediction of 2A70 aluminum alloy flow stress based on BP artificial neural network

The hot deformation behavior of 2A70 aluminum alloy was investigated by means of isothermal compression tests performed on a Gleeble-1500 thermal simulator over 360～480 ℃ with strain rates in the range of 0.01～1 s-1 and the largest deformation up to 60%. On the basis of experiments, a BP artificial neural network （ANN） model was constructed to predict 2A70 aluminum alloy flow stress. True strain, strain rates and temperatures were input to the network, and flow stress was the only output. The comparison between predicted values and experimental data showed that the relative error for the trained model was less than ±3% for the sampled data while it was less than ±6% for the non-sampled data. Furthermore, the neural network model gives better results than nonlinear regression method. It is evident that the model constructed by BP ANN can be used to accurately predict the 2A70 alloy flow stress.

A BP neural network based information fusion method for urban traffic speed estimation

Obtaining comprehensive and accurate information is very important in intelligent tragic system （ITS）. In ITS, the GPS floating car system is an important approach for traffic data acquisition. However, in this system, the GPS blind areas caused by tall buildings or tunnels could affect the acquisition of tragic information and depress the system performance. Aiming at this problem, a novel method employing a back propagation （BP） neural network is developed to estimate the traffic speed in the GPS blind areas. When the speed of one road section is lost, the speed of its related road sections can be used to estimate its speed. The complete historical data of these road sections are used to train the neural network, using Levenberg-Marquardt learning algorithm. Then, the current speed of the related roads is used by the trained neural network to get the speed of the road section without GPS signal. We compare the speed of the road section estimated by our method with the real speed of this road section, and the experimental results show that the proposed method of traffic speed estimation is very effective.

Sedimentary Micro-phase Automatic Recognition Based on BP Neural Network

In the process of geologic prospecting and development, it is important to forecast the distribution of gritstone, master the regulation of physical parameter in the reserves mass level. Especially, it is more important to recognize to rock phase and sedimentary circumstance. In the land level, the study of sedimentary phase and micro-phase is important to prospect and develop. In this paper, an automatic approach based on ANN (Artificial Neural Networks) is proposed to recognize sedimentary phase, the corresponding system is designed after the character of well general curves is considered. Different from the approach extracting feature parameters, the proposed approach can directly process the input curves. The proposed method consists of two steps: The first step is called learning. In this step, the system creates automatically sedimentary micro-phase features by learning from the standard sedimentary micro-phase patterns such as standard electric current phase curves of the well and standard resistance rate curves of the well. The second step is called recognition. In this step, based the results of the learning step, the system classifies automatically by comparing the standard pattern curves of the well to unknown pattern curves of the well. The experiment has demonstrated that the proposed approach is more effective than those approaches used previously.

Nonlinear inversion for electrical resistivity tomography based on chaotic DE-BP algorithm

Nonlinear resistivity inversion requires efficient artificial neural network(ANN)model for better inversion results.An evolutionary BP neural network(BPNN)approach based on differential evolution(DE)algorithm was presented,which was able to improve global search ability for resistivity tomography 2-D nonlinear inversion.In the proposed method,Tent equation was applied to obtain automatic parameter settings in DE and the restricted parameter Fcrit was used to enhance the ability of converging to global optimum.An implementation of proposed DE-BPNN was given,the network had one hidden layer with 52 nodes and it was trained on 36 datasets and tested on another 4 synthetic datasets.Two abnormity models were used to verify the feasibility and effectiveness of the proposed method,the results show that the proposed DE-BP algorithm has better performance than BP,conventional DE-BP and other chaotic DE-BP methods in stability and accuracy,and higher imaging quality than least square inversion.

An Evaluating Model for Enterprise's Innovation Capability Based on BP Neural Network

To meet the challenge of knowledge-based economy in the 21st century,scientifically evaluating the innovation capability is important to strengthen the international competence and acquire long-term competitive advantage for Chinese enterprises.In the article,based on the description of concept and structure of enterprise's innovation capability,the evaluation index system of innovation capability is established according to Analytic Hierarchy Process(AHP).In succession,evaluation model based on Back Propagation(BP) neural network is put forward,which provides some theoretic guidance to scientifically evaluating the innovation capability of Chinese enterprises.

Researches On The Network Security Evaluation Method Based Bn BP Neural Network

This paper first describes the basic theory of BP neural network algorithm, defects and improved methods, establishes a computer network security evaluation index system, explores the computer network security evaluation method based on BP neural network, and has designed to build the evaluation model, and shows that the method is feasible through the MATLAB simulation experiments.

Fault Location in Transmission Lines Using BP Neural Network Trained with PSO Algorithm

In modem protection relays, the accurate and fast fault location is an essential task for transmission line protection from the point of service restoration and reliability. The applications of neural networks based fault location techniques to transmission line are available in many papers. However, almost all the studies have so far employed the FNN （feed-forward neural network） trained with back-propagation algorithm （BPNN） which has a better structure and been widely used. But there are still many drawbacks if we simply use feed-forward neural network, such as slow training rate, easy to trap into local minimum point, and bad ability on global search. In this paper, feed-forward neural network trained by PSO （particle swarm optimization） algorithm is proposed for fault location scheme in 500 kV transmission system with distributed parameters presentation, The purpose is to simulate distance protection relay. The algorithm acts as classifier which requires phasor measurements data from one end of the transmission line and DFT （discrete Fourier transform）. Extensive simulation studies carried out using MATLAB show that the proposed scheme has the ability to give a good estimation of fault location under various fault conditions.

城市时用水量预测模型比较

城市时用水量的各种预测模型特点各异,预测精度也各不相同。介绍了5种城市时用水量预测模型的构建原理及各自的优缺点,并以杭州市用水量为例,对5种预测模型的预测结果进行了误差比较分析。

Neural network based method for compensating model error

Two traditional methods for compensating function model errors, the method of adding systematic parameters and the least-squares collection method, are introduced. A proposed method based on a BP neural network （called the H-BP algorithm） for compensating function model errors is put forward. The function model is assumed as y =f（x1, x2,… ,xn）, and the special structure of the H-BP algorithm is determined as （ n ＋ 1） ×p × 1, where （n ＋ 1） is the element number of the input layer, and the elements are xl, x2,…, xn and y＇ （ y＇ is the value calculated by the function model）; p is the element number of the hidden layer, and it is usually determined after many tests; 1 is the dement number of the output layer, and the element is △y = y0-y＇（y0 is the known value of the sample）. The calculation steps of the H-BP algorithm are introduced in detail. And then, the results of three methods for compensating function model errors from one engineering project are compared with each other. After being compensated, the accuracy of the traditional methods is about ± 19 mm, and the accuracy of the H-BP algorithm is ± 4. 3 mm. It shows that the proposed method based on a neural network is more effective than traditional methods for compensating function model errors.

A prediction comparison between univariate and multivariate chaotic time series

The methods to determine time delays and embedding dimensions in the phase space delay reconstruction of multivariate chaotic time series are proposed. Three nonlinear prediction methods of multivariate chaotic time series including local mean prediction, local linear prediction and BP neural networks prediction are considered. The simulation results obtained by the Lorenz system show that no matter what nonlinear prediction method is used, the prediction error of multivariate chaotic time series is much smaller than the prediction error of univariate time series, even if half of the data of univariate time series are used in multivariate time series. The results also verify that methods to determine the time delays and the embedding dimensions are correct from the view of minimizing the prediction error.

TIME SERIES NEURAL NETWORK MODEL FOR HYDROLOGIC FORECASTING

Time series analysis plays an important role in hydrologic forecasting,while the key to this analysis is to establish a proper model.This paper presents a time series neural network model with back propagation procedure for hydrologic forecasting.Free from the disadvantages of previous models,the model can be parallel to operate information flexibly and rapidly.It excels in the ability of nonlinear mapping and can learn and adjust by itself,which gives the model a possibility to describe the complex nonlinear hydrologic process.By using directly a training process based on a set of previous data, the model can forecast the time series of stream flow.Moreover,two practical examples were used to test the performance of the time series neural network model.Results confirm that the model is efficient and feasible.

Backlash Nonlinear Compensation of Servo Systems Using Backpropagation Neural Networks

Aim To eliminate the influences of backlash nonlinear characteristics generally existing in servo systems, a nonlinear compensation method using backpropagation neural networks(BPNN) is presented. Methods Based on some weapon tracking servo system, a three layer BPNN was used to off line identify the backlash characteristics, then a nonlinear compensator was designed according to the identification results. Results The simulation results show that the method can effectively get rid of the sustained oscillation(limit cycle) of the system caused by the backlash characteristics, and can improve the system accuracy. Conclusion The method is effective on sloving the problems produced by the backlash characteristics in servo systems, and it can be easily accomplished in engineering.

基于沉降观测资料预测最终沉降量的方法探讨

介绍几种常用的根据沉降观测资料预测最终沉降量的方法,通过其建模以及在工程实例中的应用比较各自的优缺点,探讨相对准确的预测方法。结果表明,BP网络法和双曲线法能较好地拟合沉降观测数据,但BP网络法适合预测短期沉降量,对于最终沉降量的预测,推荐采用双曲线拟合法。其它的预测方法像Asaoka法、GM(1,1)模型、泊松曲线法和指数曲线法,要么拟合效果一般,要么表现出一定的局限性,只是适用于某个工点,放到另一工点就不适用。鉴于双曲线法使用简单与适用性强的特点,建议在其它工程项目中,首推该方法来拟合沉降曲线并推算最终沉降量。