Platform Evolution in an Oligo-Miocene Back-arc Basin:An Example from the Central Iran Basin

The Qom Formation is the most important hydrocarbon reservoir target in Central Iran.The Qom platform developed in a back-arc basin during the Oligo-Miocene due to the closing of the Tethyan Seaway.This formation consists of a variety of carbonate and non-carbonate facies deposited on a platform ranging from supratidal to basin.A combination of tectonic and eustatic events led to some lateral and vertical facies variations in the study area.Six third-order depositional sequences and related surfaces were identified regarding vertical facies changes in the studied sections of this Oligo-Miocene succession.According to all results and data,this succession was initially deposited during the Chattian upon a distally steepened ramp of siliciclastic-carbonate composition,including the Bouma sequence.Then,from the late Chattian to the Aquitanian,the platform changed into a homoclinal carbonate ramp with a gentle profile.With respect to tectonic activity,this phase was a calm period during the deposition of the Qom Formation.Finally,a drowned carbonate platform and a rimmed shelf emerged during the Burdigalian,terminated by the continental deposits of the Upper Red Formation.Regarding all geological characteristics,three main tectono-eustatic evolutionary phases have been recognized in the Qom back-arcbasin.

Elemental Compositions of Clinopyroxenes from Southern Okinawa Trough Basalt:Implications for Magmatism and Structural Environment in an Initial Back-Arc Basin

The major and trace elemental compositions of clinopyroxene from basalt were used to characterize the nature of the primitive magma and structural environment beneath the southern Okinawa Trough(SOT),which is an initial back-arc basin at a continental margin.The clinopyroxenes in the basalt were augite with variable Mg^(#)contents(73.37-78.22).The regular variations in major oxide contents(i.e.,CaO,FeO,TiO_(2),and Cr)with decreasing Mg#implied that the clinopyroxenes evolved from being enriched in Mg,Ca,and Cr to being enriched in Fe and Ti.The clinopyroxenes had relatively low rare earth element concentrations(7.51×10^(-6) to 12.68×10^(-6))and negative Eu anomalies(δEu=0.67-0.95).The Kd_(cpx) values of clinopyroxenes(0.2-0.26),which were used to examine whether the clinopyroxene was equilibrated with its host basalt,demonstrate that these clinopyroxene phenocrysts were not captured crystals but were instead produced by crystallization differentiation of the magma.The calculated clinopyroxene crystallization temperatures showed a narrow range of 990-1061℃,and their crystallization pressures ranged from 2.0 to 3.2 kbar.The geochemistry features of these clinopyroxenes indicated that the parent magma belonged to the subalkaline tholeiitic magma series and suggested that the magma experienced crystallization differentiation of olivine,plagioclase,and clinopyroxene,where the crystallization of plagioclase occurred earlier than that of clinopyroxene.Combined with geophysical data,this research on primitive magma and its crystallization differentiation from clinopyroxene indicates that the SOT is in the stage of‘seafloor spreading’and that basaltic rocks produced from tholeiitic magma represent the generation of oceanic crust.

Origin of high heat flow in the back-arc basins of Sumatra:An opportunity for geothermal energy development

Volcanic arcs such as the Barisan Mountains have been identified as attractive areas for the utilization of geothermal energy,as exemplified by Ulubelu in Lampung and Sarulla in North Sumatra.However,environmental factors in the Barisan Mountains remain a primary obstacle to the exploration and exploitation of geothermal energy.The back-arc basins of Sumatra exhibit the highest heat flow worldwide;however,the heat source in this area remains a controversial issue.This study aims to investigate the origin of the high heat flow in the back-arc basins of Sumatra(North,Central,and South Sumatra basins)based on geothermal data from 384 oil wells and the current literature for geological evaluation.The findings of this study indicate that the back-arc basins of Sumatra experienced severe extensional deformation during the Tertiary Period through a large pull-apart and slab rollback mechanism.This deformation resulted in the thinning of the continental crust in this region(27-32 km)and the formation of multiple normal faults.Consequently,the presence of magma resulting from mantle upwelling implies a high heat flow in the back-arc basins of Sumatra.This condition ranks the back-arc basins of Sumatra among the highest heat flow regions of the world,with heat flows>100 mW/m^(2).These findings indicate that the back-arc basins of Sumatra have significant opportunities to exploit their geothermal energy potential.This study provides novel insights into the potential of geothermal energy,particularly in the back-arc basins of Sumatra.

Heterogeneity and differential hydrocarbon accumulation model of deep reservoirs in foreland thrust belts: A case study of deep Cretaceous Qingshuihe Formation clastic reservoirs in southern Junggar Basin, NW China

Using the data of drilling, logging, core, experiments and production, the heterogeneity and differential hydrocarbon accumulation model of deep reservoirs in Cretaceous Qingshuihe Formation(K1q) in the western section of the foreland thrust belt in southern Junggar Basin are investigated. The target reservoirs are characterized by superimposition of conglomerates, sandy conglomerates and sandstones, with high content of plastic clasts. The reservoir space is mainly composed of intergranular pores. The reservoirs are overall tight, and the sandy conglomerate has the best physical properties. The coupling of short deep burial period with low paleotemperature gradient and formation overpressure led to the relatively weak diagenetic strength of the reservoirs. Specifically, the sandy conglomerates show relatively low carbonate cementation, low compaction rate and high dissolution porosity. The special stress-strain mechanism of the anticline makes the reservoirs at the top of the anticline turning point more reformed by fractures than those at the limbs, and the formation overpressure makes the fractures in open state. Moreover, the sandy conglomerates have the highest oil saturation. Typical anticline reservoirs are developed in deep part of the thrust belt, but characterized by "big trap with small reservoir". Significantly, the sandy conglomerates at the top of anticline turning point have better quality, lower in-situ stress and higher structural position than those at the limbs,with the internal hydrocarbons most enriched, making them high-yield oil/gas layers. The exponential decline of fractures makes hydrocarbon accumulation difficult in the reservoirs at the limbs. Nonetheless, plane hydrocarbon distribution is more extensive at the gentle limb than the steep limb.

Diagenesis of the Paleogene Sandstones in the DN2 Gas Field,Kuqa Foreland Basin and its Link to Tectonics

We investigated diagenesis of the sandstones from the DN2 Gas Field of the Kuqa Foreland Basin(KFB),in order to infer the timing of fluid migration and discuss the linkage between fluids and tectonics.The textures and chemical composition of authigenic minerals,fluid evidence from fluid inclusions and formation water measurements were all used to fulfill this aim.Eodiagenesis occurred with the participation of meteoric water and connate water.Mesodiagenesis is related to high salinity fluids,which were attributed as originating from the overlying Neogene Jidike Formation evaporite(principal minerals including halite,anhydrite,glauberite,carnallite and thenardite).The onset of high salinity fluid migration is inferred to occur during the late Miocene(12.4-9.2 Ma)through the use of homogenization temperatures measured in the present study and K-Ar dating of authigenetic illites from previous work.This period is consistent with the crucial phase(13-10 Ma)that witnessed the rapid uplift of the southern Tianshan Mts and the stage when calcite and anhydrite veins formed in the studied strata.We thus argue that diagenesis related to high salinity fluids occurred as a response to the Tianshan Mts'rapid uplift and related tectonic processes.The flow of high salinity fluids was probably driven by a density gradient and channeled and focused by fractures formed contemporaneously.

The accumulation characteristics and exploration potential of oil and gas in the back-arc basin of Japan under the background of high heat flow

The Sea of Japan is located in the southeast margin of Eurasia, in the triangle area of the western Pacific Ocean. Due to the interaction of the Pacific plate, Eurasian plate and Philippine plate, its tectonic environment is complex, forming a typical trench-arc-basin system. At present, 148 oil and gas fields have been discovered in Japan, with an oil and gas resource of 255.78×10^(6) t, showing a good prospect for oil and gas exploration. Based on the previous research and the recently collected geological and geophysical data, the characteristics of tectonic-sedimentary evolution and geothermal field in the basins around the Sea of Japan are analyzed. The results show that the tectonic evolution of the basin is mainly controlled by plate subduction and back-arc oceanic crust expansion, and it mainly undergone four tectonic-sedimentary evolution stages: Subduction period, basin development period, subsidence period and compression deformation period. The overall heat flow value of Japan Sea is high, and it is distributed annularly along Yamato Ridge. The geothermal heat flow value is about 50–130 MW/m^(2), and the average heat flow is75.9±19.8 MW/m^(2), which has a typical “hot basin ”. The high heat flow background provides unique thermal evolution conditions for hydrocarbon generation, which leads to the high temperature and rapid evolution. The authors summarized as “early hydrocarbon generation, rapid maturity and shallow and narrow hydrocarbon generation window”. The type of oil and gas is mainly natural gas, and it mainly distributed in Neogene oil and gas reservoirs. The trap types are mainly structural traps, lithologic traps and composite traps. In addition, the pre-Neogene bedrock oil and gas reservoirs also show a good exploration prospect. The resource prospecting indicates that Niigata Basin, Ulleung Basin and kitakami Basin are the main target areas for future exploration and development.

Influence of multi-stage volcanic events on the Late Cretaceous-Paleogene reservoirs and its geological significance in the northern Central Myanmar Basin

The northward subduction of the Neo-Tethys oceanic crust triggered multiple magmatic activities in the West Myanmar Arc,which in turn influenced the deposition of sedimentary pyroclastic rocks from the Cretaceous to Eocene strata in the Central Myanmar Basin(CMB).The pore structure of these lithologic reservoirs is complex and rich in tuffaceous sandstone,which plays an adverse role in reservoir development in this region.To understand the development characteristics and genetic mechanism of the pyroclastic rocks within three sets of reservoirs in this area,a comprehensive analysis was conducted through borehole core observations,thin section identification,scanning electron microscope analysis,and mercury injection tests.The tuffaceous sandstone from the upper Cretaceous to the Eocene is dominated by intermediate-acid volcanic rock debris.The pyroclastic rocks exhibit evident chloritization and ironization,with residual intergranular pores being the principal type accompanied by a smaller amount of intergranular dissolved pores and intragranular dissolved pores.The highest porosity is observed in the Eocene tuffaceous sandstone,ranging from 8%to 12%.The Late Cretaceous to Paleocene sandstones exhibit lower porosity levels of only 4%-6%.These reservoirs are characterized by their low porosity and low-permeability.Despite the presence of a good source rock in this area,the volcanic debris particles filling the pores,as well as their subsequent devitrification,chloritization,and limonite mineralization,result in pore throat blockage and narrowing.The reservoirs in this area are small in size,exhibit poor reservoir connectivity and lateral continuity,and fail to meet the necessary conditions for commercial-scale hydrocarbon accumulation and migration.

The Uplift of the Longmenshan Thrust Belt and Subsidence of the West Sichuan Foreland Basin

Based on fission track dating of apatite, and measurement of vitrinite reflectance of rock samples from the Longmenshan (Longmen Mountain)area and the West Sichuan foreland basin and computer modelling it is concluded that (l)the Songpan-Garze fold belt has uplifted at least by 3-4 km with an uplift rate of no less than 0.3-0.4 mm/a since 10 Ma B.P.; (2) the Longmenshan thrust nappe belt has uplifted at least by 5-6 km with an uplift rate of more than 0.5- 0.6 mm /a since 10 Ma B.P.; (3) the Longmenshan detachment belt has uplifted by 1 - 2 km at a rate of 0.016-0.032 mm/a since 60 Ma B.P.; (4) the West Sichuan foreland basin has uplifted by 1.7-3 km at a rate of 0.028-0.05 mm/a since 60 Ma B.P.; (5) the uplift rate of the area on the west side of the Beichuan-Yingxiu-Xiaoguanzi fault for the last 10 Ma is 40 times as much as that on its east side; (6) the uplifting of the the Songpan - Garze fold belt and the subsidence of the West Sichuan foreland basin 60 Ma ago exhibit a mirro-image correlation, i.e. the rapid uplifting of the the Songpan-Garze fold belt was corresponding to the rapid subsidence of the basin;the Songpan-Garze fold belt has uplifted at a much greater rate than the West Sichuan foeland basin in the last 60 Ma;and (7) the palaeogeothermal gradient was 25℃ /km in the West Sichuan foreland basin.

From Flysch to Molasse—Sedimentary and Tectonic Evolution of Late Caledonian -Early Hercynian Foreland Basin in North Qilian Mountains

The Late Caledonian to Early Hercynian North Qilian orogenic belt in no rthwestern China is an elongate tectonic unit situated between the North China p late in the north and the Qaidam plate in the south. North Qilian started in the latest Proterozoic to Cambrian as a rift basin on the southern margin of North China, and evolved later to an archipelagic ocean and active continental margin during the Ordovician and a foreland basin from Silurian to the Early and Middle Devonian. The Early Silurian flysch and submarine alluvial fan, the Middle to L ate Silurian shallow marine to tidal flat deposits and the Early and Middle Devo nian terrestrial molasse are developed along the corridor Nanshan. The shallowin g upward succession from subabyssal flysch, shallow marine, tidal flat to terre strial molasse and its gradually narrowed regional distribution demonstrate that the foreland basin experienced the transition from flysch stage to molasse stag e during the Silurian and Devonian time.

Control of neotectonic movement on hydrocarbon accumulation in the Kuqa Foreland Basin,west China

Neotectonic movement refers to the tectonic movement that has happened since the Cenozoic, which is the latest movement. It has the most important influence on the basins in west China, especially on the hydrocarbon accumulation in the western foreland basins. We determined the time of neotectonic movement in the Kuqa Foreland Basin, which began from the Neogene, and analyzed the patterns of movement, which were continuous and fast subsidence in the vertical direction and intense lateral compression. The structure styles are that the faulting is weakened and the folding is strengthened gradually from north to south. We studied the control of neotectonic movement on the hydrocarbon accumulation process and model in the Kuqa Foreland Basin with basin simulation technique. The largest subsidence rate of the Kuqa Foreland Basin reached 1,200 m/Ma during the neotectonic movement, leading to rapid maturing of source rock within 5 Ma and a large quantity of hydrocarbon being generated and expelled. The thick neotectonic strata can form high quality reservoirs with the proved gas and oil reserves accounting for 5% and 27% of the total reserves, respectively. 86% of the structural traps were formed in the neotectonic movement period. The faults formed during the neotectonic movement serve as important migration pathways and they exist in the region where the hydrocarbon reservoirs are distributed. Abnormally high pressure caused by the intense lateral compression, thick neotectonic strata deposition and rapid hydrocarbon generation provide driving force for hydrocarbon migration. The accumulation elements match each other well over a short period, leading to many large gas fields formed later in the Kuqa Foreland Basin.

Intra-continental back-arc basin inversion and Late Carboniferous magmatism in Eastern Tianshan,NW China:Constraints from the Shaquanzi magmatic suite

The Yamansu belt,an important tectonic component of Eastern Tianshan Mountains,of the Central Asian Orogenic Belt,NW China hosts many Fe-(Cu)deposit.In this study,we present new zircon U-Pb geochronology and geochemical data of the volcanic rocks of Shaquanzi Formation and diorite intrusions in the Yamansu belt.The Shaquanzi Formation comprises mainly basalt,andesite/andesitic tuff,rhyolite and sub-volcanic diabase with local diorite intrusions.The volcanic rocks and diorites contain ca.315-305 Ma and ca.298 Ma zircons respectively.These rocks show calc-alkaline affinity with enrichment in large-ion lithophile elements(LILEs),light rare-earth elements(LREEs),and depletion in high field strength elements(HFSEs)in primitive mantle normalized multi-element diagrams,which resemble typical back-arc basin rocks.They show depleted mantle signature with ε_(Nd)(t)ranging from+3.1 to +5.6 for basalt;+2.1 to+4.7 for andesite;-0.2 to+1.5 for rhyolite and the ε_(Hf)(t)ranges from-0.1 to +13.0 for andesites;+5.8 to +10.7 for andesitic tuffs.We suggest that the Shaquanzi Formation basalt might have originated from a depleted,metasomatized lithospheric mantle source mixed with minor(3-5%)subduction-derived materials,whereas the andesite and rhyolite could be fractional crystallization products of the basaltic magma.The Shaquanzi Formation volcanic rocks could have formed in an intracontinental back-arc basin setting,probably via the southward subduction of the Kangguer Ocean beneath the Middle Tianshan Massif.The Yamansu mineralization belt might have undergone a continental arc to back-arc basin transition during the Late Carboniferous and the intra-continental back-arc basin might have closed in the Early Permian,marked by the emplacement of dioritic magma in the Shaquanzi belt.

Oil and Gas Accumulation in the Foreland Basins,Central and Western China

Foreland basin represents one of the most important hydrocarbon habitats in central and western China. To distinguish these foreland basins regionally, and according to the need of petroleum exploration and favorable exploration areas, the foreland basins in central and western China can be divided into three structural types： superimposed, retrogressive and reformative foreland basin （or thrust belt）, each with distinctive petroleum system characteristics in their petroleum system components （such as the source rock, reservoir rock, caprock, time of oil and gas accumulation, the remolding of oil/gas reservoir after accumulation, and the favorable exploration area, etc.）. The superimposed type foreland basins, as exemplified by the Kuqa Depression of the Tarim Basin, characterized by two stages of early and late foreland basin development, typically contain at least two hydrocarbon source beds, one deposited in the early foreland development and another in the later fault-trough lake stage. Hydrocarbon accumulations in this type of foreland basin often occur in multiple stages of the basin development, though most of the highly productive pools were formed during the late stage of hydrocarbon migration and entrapment （Himalayan period）. This is in sharp contrast to the retrogressive foreland basins （only developing foreland basin during the Permian to Triassic） such as the western Sichuan Basin, where prolific hydrocarbon source rocks are associated with sediments deposited during the early stages of the foreland basin development. As a result, hydrocarbon accumulations in retrogressive foreland basins occur mainly in the early stage of basin evolution. The reformative foreland basins （only developing foreland basin during the Himalayan period） such as the northern Qaidam Basin, in contrast, contain organic-rich, lacustrine source rocks deposited only in fault-trough lake basins occurring prior to the reformative foreland development during the late Cenozoic, with hydrocarbon accumulations taking place relatively late （Himalayan period）. Therefore, the ultimate hydrocarbon potentials in the three types of foreland basins are largely determined by the extent of spatial and temporal matching among the thrust belts, hydrocarbon source kitchens, and regional and local caprocks.

A Large-scale Tertiary Salt Nappe Complex in the Leading Edge of the Kuqa Foreland Fold-Thrust Belt, the Tarim Basin, Northwest China

The tectono-stratigraphic sequences of the Kuqa foreland fold-thrust belt in the northern Tarim basin, northwest China, can be divided into the Mesozoic sub-salt sequence, the Paleocene-Eocene salt sequence and the Oligocene-Quaternary supra-salt sequence. The salt sequence is composed mainly of light grey halite, gypsum, marl and brown elastics. A variety of salt-related structures have developed in the Kuqa foreland fold belt, in which the most fascinating structures are salt nappe complex. Based on field observation, seismic interpretation and drilling data, a large-scale salt nappe complex has been identified. It trends approximately east-west for over 200 km and occurs along the west Qiulitag Mountains. Its thrusting displacement is over 30 km. The salt nappe complex appears as an arcuate zone projecting southwestwards along the leading edge of the Kuqa foreland fold belt. The major thrust fault is developed along the Paleocene-Eocene salt beds. The allochthonous nappes comprise large north-dipping faulting monoclines which are made up of Paleocene-Pliocene sediments. Geological analysis and cross-section restoration revealed that the salt nappes were mainly formed at the late Himalayan stage (c.a. 1.64 Ma BP) and have been active until the present day. Because of inhomogeneous thrusting, a great difference may exist in thrust displacement, thrust occurrence, superimposition of allochthonous and autochthonous sequences and the development of the salt-related structures, which indicates the segmentation along the salt nappes. Regional compression, gravitational gliding and spreading controlled the formation and evolution of the salt nappe complex in the Kuqa foreland fold belt.

Characteristics of Triassic Petroleum Systems in the Longmenshan Foreland Basin,Sichuan Province,China

The Triassic in the Longmengshan foreland basin is rich in oil and gas resources. Its reservoirs feature low-porosity, low-permeability, small pore throat, high water saturation, and strong heterogeneity. The existence of abnormally high pressure and various reservoir-cap combinations developed at different times provide favorable conditions for trapping oil and gas. Taking the theory of petroleum systems as a guide, and beginning with research on tectonics, sedimentary history, distribution and evolution of source rocks, reservoir evolution, hydraulic force distribution, and hydrocarbon migration, analysis and study of static factors like source rocks, reservoirs and cap rocks, and dynamic factors such as hydrocarbon generation, migration, and accumulation revealed the characteristics of the Upper Triassic petroleum system in western Sichuan province. The deepbasin gas in the central hydrocarbon kitchen of the Upper Triassic, structural-lithological combination traps on the surrounding slopes, and the structural traps of the Indo-Chinese-Yangshan paleohighs, are potential plays. The relatively well- developed fault zones in the southern segment of the Longmengshan foothill belt are favorable Jurassic gas plays. Pengshan-Xinjin, Qiongxi, and Dayi are recent exploration targets for Jurassic oil/gas reservoirs.

Interpreting the Coseismic Uplift and Subsidence of the Longmen Shan Foreland Basin System during the Wenchuan Earthquake by a Elastic Flexural Model

The coseismic surface uplift of the Longmen Shan（LMS） created an instantaneous topographic load over the western margin of the Sichuan Basin, where surface subsidence, decreasing eastward, has been measured using several methods, such as GPS, SAR and levelling. Using an elastic flexural model, we aim to interpret the coseismic surface uplift and subsidence, and constrain the effective lithospheric elastic thickness（Te） of the Sichuan Basin. Using different effective elastic thickness values for the Sichuan Basin, a series of subsidence curves were computed by the elastic flexure model equation for a broken elastic plate. The curves, produced by models using an effective elastic thickness of 30–40 km, provided the best fit to the general pattern of observed coseismic subsidence of the Sichuan Basin. However, the calculated subsidence（-40–70 cm） at the front of the LMS is evidently lower than the observed values（-100 cm）, suggesting that the effective elastic thickness therein should be lower. These results indicate that the lithospheric strength may decrease westward from the Sichuan Basin to the LMS.

Carbonate Sequence Stratigraphy of a Back-Arc Basin: A Case Study of the Qom Formation in the Kashan Area, Central Iran

The Qom Formation comprises Oligo-Miocene deposits from a marine succession distributed in the Central Basin of Iran. It is composed of five members designated as A-F. Little previous work exists on the sequence stratigraphy. Based on an integrated study of sequence stratigraphy with outcrop data, wells and regional seismic profiles, the Qom Formation is interpreted as a carbonate succession deposited in a mid.Tertiary back-arc basin. There are two second-order sequences （designated as SS1 and SS2） and five third-order sequences （designated as S1-S5）. Five distinct systems tracts including transgressive, highstand, forced regressive, slope margin and Iowstand have been recognized. The relationship between the sequences and lithologic sub-units has been collated and defined （S1 to S5 individually corresponding to A-C1, C2--C4, D-E, the lower and upper portions of F）; a relative sea level change curve and the sequence stratigraphic framework have been established and described in detail. The coincidence of relative sea level change between that of the determined back-arc basin and the world indicates that the sedimentary cycles of the Qom Formation are mainly controlled by eustatic cycles. The variable combination of the systems tracts and special tectonic-depositional setting causally underpin multiple sequence stratigraphic framework styles seen in the carbonates of the back-arc basin revealing： （1） a continental margin basin that developed some form of barrier, characterized by the development of multiple cycles of carbonate-evaporites; （2） a flat carbonate ramp, which occurred on the southern shelf formed by the lack of clastic supply from nearby magmatic islands plus mixed siliciclastics and carbonates that occurred on the northern shelf due to a sufficient clastics supply from the land; and （3） a forced regressive stratigraphic stacking pattern that occured on the southern shelf and in basin lows due to the uplifting of the southern shelf. Thick and widespread aggradational framework limestone usually occurs in the initial sequences （S1 and S3） of the supersequence, which led to preferential oil reservoir deposition but a lack of source and cap rocks, whereas the retrogradational and progradational framework limestone usually occurs in the later sequences （S2 and S4-S5） of the supersequence, which results in two perfect sets of source, reservoir and cap rock assemblies, so that the limestone in sub-member C2-C4 and the F-Member can be predicted as important objects for oil exploration.

The Coupling Relationship between the Uplift of Longmen Shan and the Subsidence of Foreland Basin,Sichuan,China

Depending on the analysis of the coeval sedimentary geometry and subsidence mechanism in the Longmen Shan foreland basin, three models about the coupling relationship between Longmen Shan uplift and foreland basin subsidence since the Indosinian have been proposed：（1） crustal shortening and its related wide wedge-shaped foreland basin,（2） crustal isostatic rebound and its related tabular foreland basin, and（3） lower crustal flow and its related narrow wedge-shaped foreland basin. Based on the narrow wedge-shaped foreland basin developed since 4 Ma, it is believed that the narrow crustal shortening and tectonic load driven by lower crustal flow is a primary driver for the present Longmen Shan uplift and the Wenchuan（Ms 8.0） earthquake.

Simulation of the Subsidence and Deposition Processes of the Foreland Basin in the Southwestern Margin of Ordos

Characteristics of deformation in the thrust belt and sequence stratigraphic framework in the foreland basin, structural features of the basin margin, and the episodic thrusting are studied in this paper by combining the eastern Qilian thrust belt and the Late Triassic foreland basin on the southwestern margin of Ordos. On this basis, a geological model and a mechanical model of coupling mechanism were established for the pair of thrust belt and foreland basin, and the subsidence and deposition process of the foreland basin were simulated on given parameters.

Tectonic Evolution of the Junggar Foreland Basin in the Late Carboniferous-Permian

A comprehensive study has been carried out to subdivide and correlate the Upper Carboniferous and Permian sedimentary successions in the Junggar basin based on outcrops and drilling and geophysical data. The study results, combined with geological analyses of the basin's periphery and the basement, as well as studies of the sedimentary rocks within the basin, the unconformities, tectonic geometry, kinematics and geodynamics, lead to the conclusion that the Junggar basin was characterized by the development of foreland basin systems during the Late Carboniferous and Permian. During that period, three foreland basin systems were developed: (1) the northwest foreland basin system, which trended nearly north-south from Mahu to the Chepaizi Palaeo-mountain during its early stage of development and thus it was also referred to as the west foreland basin system; (2) the Karamaili foreland basin system in the east and (3) the Northern Tianshan foreland basin system in the south. These systems are different in size, development stage and time of formation. The first two are developed earlier than the third, but they are smaller in size. All the structures in the Junggar basin have resulted from the integration and superposition of structural elements in the above three systems. In general, the development of the Junggar basin can be divided into four stages. Stage I was marked by the creation and evolution of the marginal western foreland and the peripheral Karamaili foreland basin systems during the Late Carboniferous-early Early Permian (C3P1ja). Stage II was characterized by the development of complicated foreland basin systems during the middle-late Early Permian (P1jb-P1f) when the three foreland basin systems took their shapes. Stage III was the integration stage of peripheral foreland basin systems during the Middle Permian (P2) in which steady and slow tectonic subsidence prevailed. Stage IV coincided with the shrinking of foreland basin development during the Late Permian (P3).

Structural Styles of the Longmenshan Thrust Belt and Evolution of the Foreland Basin in Western Sichuan Province, China

The Longmenshan thrust system consists of two major groups of structural styles according to the depth of their involvement: basement thrusts-compressional fault blocks; fold-thrust system in the cover. In cross-section, the Longmenshan structural belt is divided into 5 zones. The propagation of the Longmenshan thrust system is piggy-back due to pushing at the early stage and overstep due to gravity sliding at the late stage. Balanced cross-sections and palinspastic reconstruction reveal that the total sliding displacement of the thrust system amounts to 120 km. The tectonic evolution of the Tethys domain in western Sichuan has experienced 5 stages: continental break-up; ocean-continent subduction ; continent-arc collision; orogenic thrusting; uplift of western Sichuan.