In this paper, the phase characteristic disturbance model for baseband direct sequence spread spectrum (DSSS) signal in additive white Gaussian noise (AWGN) environment is established, and the probability density func...In this paper, the phase characteristic disturbance model for baseband direct sequence spread spectrum (DSSS) signal in additive white Gaussian noise (AWGN) environment is established, and the probability density function (PDF) of phase characteristic disturbance is obtained. Then a novel receiver model for baseband DSSS signal based on maximum likelihood (ML) criterion is proposed. The simulation results show that, comparing with correlation scheme, the performance of the proposed method for baseband DSSS signal is 1dB worse in AWGN environment. However, if there is narrow interference in the AWGN environment, the proposed method will show better performance up to 2.5dB, and it has good adaptive resistance to narrowband interference located in different frequency points. This method could be used as an alterative communication scheme for military circumstance when existing strong narrowband interference of various frequencies.展开更多
In this study, the propagation of electromagnetic waves in one-dimensional plasma photonic crystals （PPCs）, namely, superlattice structures consisting alternately of a homogeneous unmagnetized plasma and dielectric ...In this study, the propagation of electromagnetic waves in one-dimensional plasma photonic crystals （PPCs）, namely, superlattice structures consisting alternately of a homogeneous unmagnetized plasma and dielectric material, is simulated numerically using the finite-difference time-domain （FDTD） algorithm. A perfectly matched layer （PML） absorbing technique is used in this simulation. The reflection and transmission coefficients of electromagnetic （EM） waves through PPCs are calculated. The characteristics of the photonic band gap （PBG） are discussed in terms of plasma density, dielectric constant ratios, number of periods, and introduced layer defect. These may provide some useful information for designing plasma photonic crystal devices.展开更多
The factors affecting one dimensional （1D） and two dimensional （2D） photonic crystals （PhCs） are systemically analyzed in this paper by numerical simulation. Transfer matrix method （TMM） is employed for 1D PCs...The factors affecting one dimensional （1D） and two dimensional （2D） photonic crystals （PhCs） are systemically analyzed in this paper by numerical simulation. Transfer matrix method （TMM） is employed for 1D PCs, both finite difference time domain method （FDTD） and plane wave expansion method （PWE） are employed for 2D PCs. The result shows that the photonic bandgaps （PBG） are directly affected by crystal type, crystal lattice constant, modulation of refractive index and periodicity, and it is should be useful for design of different type photonic crystals with the required PBG and functional devices. Finally, as an example, a near-IR 1D PCs narrow filter was designed.展开更多
The micro-genetic algorithm (MGA) optimization combined with the finite-difference time-domain (FDTD) method is applied to design a band-notched ultra wide-band (UWB) antenna. A U-type slot on a stepped U-type UWB mon...The micro-genetic algorithm (MGA) optimization combined with the finite-difference time-domain (FDTD) method is applied to design a band-notched ultra wide-band (UWB) antenna. A U-type slot on a stepped U-type UWB monopole is used to obtain the band-notched characteristic for 5 GHz wireless local area network (WLAN) band. The measured results show that voltage standing wave ration (VSWR) less than 2 covers 3.1-10.6 GHz operating band and VSWR more than 2 is within 5.150-5.825 GHz notched one with the highest value of 5.6. Agreement among the calculated, HFSS simulated and measured results validates the effiectiveness of this MGA-FDTD method, which is efficient for UWB antennas design.展开更多
电源网络S参数与芯片电源模型(Chip Power Module,CPM)级联可实现电源时域噪声仿真,完成电源完整性设计签核。当下部分仿真工具在AC阻抗优化过程中导出的S参数存在低频段无法覆盖的问题,影响时域纹波仿真精度,如果重新对S参数进行提取,...电源网络S参数与芯片电源模型(Chip Power Module,CPM)级联可实现电源时域噪声仿真,完成电源完整性设计签核。当下部分仿真工具在AC阻抗优化过程中导出的S参数存在低频段无法覆盖的问题,影响时域纹波仿真精度,如果重新对S参数进行提取,又会增加仿真时间降低仿真效率。针对AC阻抗优化过程中导出的S参数无法覆盖低频段的问题,提出了一种电源网络S参数低频段拓展方法,结合电压调节模块(Voltage Regulator Module,VRM)的R-L模型,推导出低频段的S参数可以借用抽取的S参数中最低频点处的S参数实现低频段S参数的拓展。仿真和实验结果表明,通过对低频段S参数进行拓展,电源时域纹波噪声仿真的精度提升31%。同时,低频段的S参数直接借用已抽取的S参数中低频点的数值无须重复提取,在8 GB内存的配置下,仿真时间节约14%左右,提高了仿真效率。展开更多
基金supported by the National Basic Research Program (973 Program) of China under Grant No.2007CB310606National Key Technologies R&D Program under Grant No.2009ZX03004-001
文摘In this paper, the phase characteristic disturbance model for baseband direct sequence spread spectrum (DSSS) signal in additive white Gaussian noise (AWGN) environment is established, and the probability density function (PDF) of phase characteristic disturbance is obtained. Then a novel receiver model for baseband DSSS signal based on maximum likelihood (ML) criterion is proposed. The simulation results show that, comparing with correlation scheme, the performance of the proposed method for baseband DSSS signal is 1dB worse in AWGN environment. However, if there is narrow interference in the AWGN environment, the proposed method will show better performance up to 2.5dB, and it has good adaptive resistance to narrowband interference located in different frequency points. This method could be used as an alterative communication scheme for military circumstance when existing strong narrowband interference of various frequencies.
基金supported by the Program for New Century Excellent Talents in University(No.NCET-05-0575)the Education Science Foundation of Jiangxi Province(No.Z-03510)
文摘In this study, the propagation of electromagnetic waves in one-dimensional plasma photonic crystals （PPCs）, namely, superlattice structures consisting alternately of a homogeneous unmagnetized plasma and dielectric material, is simulated numerically using the finite-difference time-domain （FDTD） algorithm. A perfectly matched layer （PML） absorbing technique is used in this simulation. The reflection and transmission coefficients of electromagnetic （EM） waves through PPCs are calculated. The characteristics of the photonic band gap （PBG） are discussed in terms of plasma density, dielectric constant ratios, number of periods, and introduced layer defect. These may provide some useful information for designing plasma photonic crystal devices.
基金Sponsored by the Ministerial Level Advanced Research Foundation (1006513002060)
文摘The factors affecting one dimensional （1D） and two dimensional （2D） photonic crystals （PhCs） are systemically analyzed in this paper by numerical simulation. Transfer matrix method （TMM） is employed for 1D PCs, both finite difference time domain method （FDTD） and plane wave expansion method （PWE） are employed for 2D PCs. The result shows that the photonic bandgaps （PBG） are directly affected by crystal type, crystal lattice constant, modulation of refractive index and periodicity, and it is should be useful for design of different type photonic crystals with the required PBG and functional devices. Finally, as an example, a near-IR 1D PCs narrow filter was designed.
基金supported by the Shanghai Leading Academic Discipline Project (Grant No.S30108)
文摘The micro-genetic algorithm (MGA) optimization combined with the finite-difference time-domain (FDTD) method is applied to design a band-notched ultra wide-band (UWB) antenna. A U-type slot on a stepped U-type UWB monopole is used to obtain the band-notched characteristic for 5 GHz wireless local area network (WLAN) band. The measured results show that voltage standing wave ration (VSWR) less than 2 covers 3.1-10.6 GHz operating band and VSWR more than 2 is within 5.150-5.825 GHz notched one with the highest value of 5.6. Agreement among the calculated, HFSS simulated and measured results validates the effiectiveness of this MGA-FDTD method, which is efficient for UWB antennas design.
