A SYSTEM IDENTIFICATION METHOD USING VECTOR SPACE BASE FUNCTION

This paper presents a new system identification approach using vector space base functions, and proposes two network structures based on Gamma sequence and Laguerre sequence. After analyzing and comparing these structures in detail, some simulation results to demonstrate the conclusions are given.

Simulation of Haloxylon Ammodendron Stand Basic Diameter Structure Based on Fuzzy Distribution Function

Based on the investigation data of 12 Haloxylon ammodendron plots in the south edge of Gurbantunggut Desert, Fuzzy distribution was introduced into the study of Haloxylon ammodendron base diameter structure fitting according to the consistency between the characteristics of Fuzzy distribution function and the distribution series of cumulative percentage of stand base diameter, and the fitting precision and effect of Fuzzy distribution function were discussed. The root mean square error RMSE and determination coefficient R2 values showed that Fuzzy-Γ1, Fuzzy-Γ2, Fuzzy-Γ3, Fuzzy-Γ4 had good fitting performance, among which Fuzzy-Γ1 had relatively high fitting precision, and its parameters were closely related to stand age and density, Fuzzy-Γ2 distribution function was the second, and Fuzzy-Γ4 distribution function had the worst fitting effect. By introducing a parameter c from the similarity of four distribution function formulas, a generalized Fuzzy distribution function Fuzzy-Γ5 is obtained. This function shows the highest fitting accuracy. Most of the values of parameter c are near 1 or 2, which shows that the diameter distribution is mainly approximate to Fuzzy-Γ1 and Fuzzy-Γ2.

Trajectory of Walking Function in Late-Stage Older Individuals Managed with a Regular Exercise Program: A 5-Year Longitudinal Tracking with an IoT Gait Analysis System Using Accelerometers

Purpose: This study focused on maintaining and improving the walking function of late-stage older individuals while longitudinally tracking the effects of regular exercise programs in a day-care service specialized for preventive care over 5 years, using detailed gait function measurements with an accelerometer-based system. Methods: Seventy individuals (17 male and 53 female) of a daycare service in Tokyo participated in a weekly exercise program, meeting 1 - 2 times. The average age of the participants at the start of the program was 81.4 years. Gait function, including gait speed, stride length, root mean square (RMS) of acceleration, gait cycle time and its standard deviation, and left-right difference in stance time, was evaluated every 6 months. Results: Gait speed and stride length improved considerably within six months of starting the exercise program, confirming an initial improvement in gait function. This suggests that regular exercise programs can maintain or improve gait function even age groups that predictably have a gradual decline in gait ability due to enhanced age. In the long term, many indicators tended to approach baseline values. However, the exercise program seemingly counteracts age-related changes in gait function and maintains a certain level of function. Conclusions: While a decline in gait ability with aging is inevitable, establishing appropriate exercise habits in late-stage older individuals may contribute to long-term maintenance of gait function.

Numerical Investigation on the Boundary Conditions for the Multiscale Base Functions

We study the multiscale finite element method for solving multiscale elliptic problems with highly oscillating coefficients,which is designed to accurately capture the large scale behaviors of the solution without resolving the small scale characters.The key idea is to construct the multiscale base functions in the local partial differential equation with proper boundary conditions.The boundary conditions are chosen to extract more accurate boundary information in the local problem.We consider periodic and non-periodic coefficients with linear and oscillatory boundary conditions for the base functions.Numerical examples will be provided to demonstrate the effectiveness of the proposed multiscale finite element method.

Optimization of the Dressing Parameters in Cylindrical Grinding Based on a Generalized Utility Function

The existing studies, concerning the dressing process, focus on the major influence of the dressing conditions on the grinding response variables. However, the choice of the dressing conditions is often made, based on the experience of the qualified staff or using data from reference books. The optimal dressing parameters, which are only valid for the particular methods and dressing and grinding conditions, are also used. The paper presents a methodology for optimization of the dressing parameters in cylindrical grinding. The generalized utility function has been chosen as an optimization parameter. It is a complex indicator determining the economic, dynamic and manufacturing characteristics of the grinding process. The developed methodology is implemented for the dressing of aluminium oxide grinding wheels by using experimental diamond roller dressers with different grit sizes made of medium- and high-strength synthetic diamonds type AC32 and AC80. To solve the optimization problem, a model of the generalized utility function is created which reflects the complex impact of dressing parameters. The model is built based on the results from the conducted complex study and modeling of the grinding wheel lifetime, cutting ability, production rate and cutting forces during grinding. They are closely related to the dressing conditions （dressing speed ratio, radial in-feed of the diamond roller dresser and dress-out time）, the diamond roller dresser grit size/grinding wheel grit size ratio, the type of synthetic diamonds and the direction of dressing. Some dressing parameters are determined for which the generalized utility fimction has a maximum and which guarantee an optimum combination of the following： the lifetime and cutting ability of the abrasive wheels, the tangential cutting force magnitude and the production rate of the grinding process. The results obtained prove the possibility of control and optimization of grinding by selecting particular dressing parameters.

Density Functional Theory Study on La Complex with Schiff-base as Building Block

Quantum density functional theory （DFT） results are reported for the building block [LaL^1（NO3）] of La complex [LaL^1（NO3）]NO3·5H2O （L^1 = （CH3）2CHCH2CH（NCHC4H3O）COO^-）. The structure was optimized and the calculation results show that the lanthanum ion is coordinated by one nitrogen atom and three oxygen atoms of L^1 and two oxygen atoms of nitrate ion. The bond length of La-N is 0.2637 nm and the average length of La-O is 0.2526 nm, which are consistent with the literatures. In addition, the stabilities, electronic structural characteristics and IR spectra of the complex have been analyzed, which describe the coordination of lanthanum ion with other atoms in detail.

Trait-based representation of hydrological functional properties of plants in weather and ecosystem models

Land surface models and dynamic global vegetation models typically represent vegetation through coarse plant functional type groupings based on leaf form, phenology, and bioclimatic limits. Although these groupings were both feasible and functional for early model generations, in light of the pace at which our knowledge of functional ecology, ecosystem demographics, and vegetation-climate feedbacks has advanced and the ever growing demand for enhanced model performance, these groupings have become antiquated and are identified as a key source of model uncertainty. The newest wave of model development is centered on shifting the vegetation paradigm away from plant functional types(PFTs)and towards flexible trait-based representations. These models seek to improve errors in ecosystem fluxes that result from information loss due to over-aggregation of dissimilar species into the same functional class. We advocate the importance of the inclusion of plant hydraulic trait representation within the new paradigm through a framework of the whole-plant hydraulic strategy. Plant hydraulic strategy is known to play a critical role in the regulation of stomatal conductance and thus transpiration and latent heat flux. It is typical that coexisting plants employ opposing hydraulic strategies, and therefore have disparate patterns of water acquisition and use. Hydraulic traits are deterministic of drought resilience, response to disturbance, and other demographic processes. The addition of plant hydraulic properties in models may not only improve the simulation of carbon and water fluxes but also vegetation population distributions.

Plasma-Based Graphene Functionalization in Glow Discharge

Glow discharge was utilized to add oxygen functional groups to the graphene platelets sample produced in chemical exfoliation synthesis. It was concluded based on Raman spectra that the graphene sample treated with the glow discharge preserves specific graphene features while no transformation to amorphous carbon is happening. SEM and EDS results indicated the increases of oxygen content in the graphene sample after the exposure to the glow discharge. Raman spectra also support the fact that the graphene platelets have been decorated with oxygen as the result of the glow discharge treatment.

Elastic properties of Nb-based alloys by using the density functional theory

A first-principles density functional approach is used to study the electronic and the elastic properties of Nb15X （X = Ti, Zr, Hf, V, Ta, Cr, Mo, and W） alloys. The elastic constants cn and c12, the shear modulus CI, and the elastic modulus E（lOO） are found to exhibit similar tendencies, each as a function of valence electron number per atom （EPA）, while c44 seems unclear. Both cu and c12 of Nb15X alloys increase monotonically with the increase of EPA. The C/ and E000） also show similar tendencies. The elastic constants （except c44） increase slightly when alloying with neighbours of a higher d-transition series. Our results are supported by the bonding density distribution. When solute atoms change from Ti（Zr, Hf） to V（Ta） then to Cr（Mo, W）, the bonding electron density between the central solute atom and its first neighbouring Nb atoms is increased and becomes more anisotropic, which indicates the strong interaction and thus enhances the elastic properties of Nb-Cr（Mo, W） alloys. Under uniaxial {100） tensile loading, alloyed elements with less （more） valence electrons decrease （increase） the ideal tensile strength.

Improvement of Cardiac Function by Dry Weight Optimization Based on Interdialysis Inferior Vena Caval Diameter (1)

In hemodialysis (HD) patients, the diameter of the inferior vena cava (IVC) serves for evaluation of the amount of body fluid.

Reliable Space Pursuing for Reliability-based Design Optimization with Black-box Performance Functions

Reliability-based design optimization （RBDO） is intrinsically a double-loop procedure since it involves an overall optimization and an iterative reliability assessment at each search point. Due to the double-loop procedure, the computational expense of RBDO is normally very high. Current RBDO research focuses on problems with explicitly expressed performance functions and readily available gradients. This paper addresses a more challenging type of RBDO problem in which the performance functions are computation intensive. These computation intensive functions are often considered as a ＂black-box＂ and their gradients are not available or not reliable. On the basis of the reliable design space （RDS） concept proposed earlier by the authors, this paper proposes a Reliable Space Pursuing （RSP） approach, in which RDS is first identified and then gradually refined while optimization is performed. It fundamentally avoids the nested optimization and probabilistic assessment loop. Three well known RBDO problems from the literature are used for testing and demonstrating the effectiveness of the proposed RSP method.

Efficient and recyclable Rh-catalytic system with involvement of phosphine-functionalized phosphonium-based ionic liquids for tandem hydroformylation—acetalization

The phosphine-functionalized phosphonium-based ionic liquids(dppm-Q, dppe-Q, dppp-Q and dppb-Q) as the bi-functional ligands enable the efficient one-pot tandem hydroformylationeacetalization. It was found that, in dppm-Q, dppe-Q, dppp-Q and dppb-Q, the incorporated phosphino-fragments were responsible for Rh-catalyzed hydroformylation and the phosphoniums were in charge of the subsequent acetalization as the Lewis acid catalysts. Moreover, the diphosphonium-based ionic liquid of dppb-DQ could be applied as a co-solvent to immobilize the Rh/dppb-Q catalytic system with the advantages of the improved catalytic performance, the available catalyst recyclability, and the wide generality for the substrates.

Study on Influence of Functional Composition Distribution on Combustion Performance of a Modified Single Base Propellant

The modified single base propellant samples were prepared by impregnating blasting oil into single base grains and deactivating deterrent in water medium. The concentration distribution of functional compositions in this propellant was determined by using FTIR micro-spectroscopy. Its combustion performance was investigated by means of closed-bomb and interior ballistic tests. The results show that the concentration of NG distributes parabolically along the radius and the concentration of NA decreases from the surface to the centre exponentially. The deeper the NG impregnates, the slower the NA concentration decreases, the stronger the progressive combustion is and the better the interior ballistic performance is. When the depth corresponding to maximum NG concentration is about 1/2 of the web and the NA decreases slowly, the progressive combustion is the strongest and the interior ballistic performance is the best.

A NEW FORMULATION OF BERNSTEIN-BEZIER BASED SMOOTHNESS CONDITIONS FOR pp FUNCTIONS

In this note, we establish a new formulation of smoothness conditions for piecewise polynomial (: =pp) functions in terms of the B-net representation in the general n-dimensional setting. It plays an important role for 2-dimensional setting in the constructive proof of the fact that the spaces of polynomial splines with smoothness rand total degree k≥3r+2 over arbitrary triangulations achieve the optimal approximation order with the approximation constant depending only on k and the smallest angle of the partition in [5].

Ab Initio Calculation of Dielectric Function in Wurtzite GaN Based on Walter's Model

The wavelength-dependent and frequency-dependent dielectric function of wurtzite-GaN is cMculated totally from fundamental parameters such as the lattice constant using Waiter＇s ab initio model. The errors occurring in the cMculation are carefully reduced by/inear interpolation of energy data. The Kramers-Kronig transform of the real part of greater range is obtained by extrapolation of the reM part. The calculation is time-consuming but meaningful The long-wave results are similar to the experimental data of the photon and are useful for related investigation of properties of wide-gap semiconductors such as electron scattering like the Auger recombination and impact ionization.

Function and Design Idea of UHVDC Test Base

The function of the UHVDC test base of the State Grid Corporation of China (SGCC) is oriented to serve UHVDC power transmission and substation projects, especially power transmission from West China to East China, and to promote localization of UHVDC transmission and substation equipment. In essentials, this test base consists of UHVDC test transmission line, corona cage, outdoor test site, UHV test hall, pollution and environment laboratory, electromagnetic environment simulation test site, insulator laboratory, arrester laboratory and live equipment test field. This paper introduces the function and design idea of the test base, presents the main performance parameters of the above-mentioned test facilities, and summarizes the matters of concern when siting and planning.

A design and application of compound multi-functional sensor in wood-based panel processing

A compound multi-functional sensor was designed by the study on the on-line testing technology of wood-based panels, and its properties of shape, functions, size, resistance to special environment were studied in details. The operational principles of different sensors, technical flow of manufacturing, development of software systems of special functions, and the assessments of technical specification were also be introduced. This sensor adopted many new technologies, such as the applications of piezoresistant effect and heat sensitive effect can effectively measure the pressure and temperature, digital signal processing technology was used to extract and treat signals, and resist interference, encapsulation technology was used to keep the normal run of sensor under a harsh environment. Thus, the on-line compound multi-functional temperature/pressure sensor can be applied better to supervise the production of wood-based panels. All technical specifications of the compound multi-functional sensor were tested and the results met the requirements of the equipments.

Functional outcomes after home-based rehabilitation for heroin-induced spongiform leukoencephalopathy

A 22-year-old man with a 2-year history of heroin vapor inhalation developed spongiform leukoencephalopathy and underwent clinical and home-based rehabilitative treatments. Activities of daily living were measured using the Functional Independence Measure at discharge and at 6, 12, and 24 months after discharge. His neurological symptoms gradually disappeared with rehabilitative treatment, and the functional scale scores increased from 55 on admission to 105 at 24 months after discharge. These results suggest that home-based rehabilitation was effective in ameliorating the pathology and improving activities of daily living in this patient with heroin-induced spongiform leukoencephalopathy.

Evaluation of the Functionality of the Networking of Sexual and Reproductive Health Rights Services in the Event of Gender-Based Violence in the Commune of Kpomasse in 2022

Introduction: In developing countries, gender-based violence (GBV) is a real public health problem. In Benin, GBV affects the majority of women and girls (69%). Benin has implemented strategies and set up integrated centers for the management of violence in order to reduce cases of violence and ensure the holistic management of victims. The objective of our study was to assess the functionality of the network of sexual and reproductive health rights (SRHR) in case of GBV in the commune of Kpomasse in 2022. Method: This descriptive and evaluative study was conducted from March 21 to April 11, 2022. The sampling method used was non-probabilistic. Reasoned choice and convenience were the techniques used for the different targets of the study. The functionality of the SRHR service network was assessed first by calculating scores at the structure, process and outcome levels, and then by analysis using the human rights-based approach. Results: Out of the 34 GBV victims identified, only one had received a full response and 54% of the victims had no knowledge of SRHR. The lack of knowledge about health care facilities was 41% for victims and 80% for non-victims in the community who participated in the study. In the case of gender-based violence, the community preferred to settle out of court rather than report it. The functionality of the networking of sexual and reproductive health rights services in the event of the occurrence of gender-based violence in the commune of Kpomassè is insufficient. Lack of knowledge of the roles of rights holders (DD) and duty bearers (DO) explains the insufficient functionality of networking. Conclusion: Training of SRHR service agents and community sensitization are essential to improve the functionality of SRHR service networking in the commune of Kpomasse.