The basic characteristics of Australian iron ore concentrate (Ore-A) and its effects on sinter properties during a high-limonite sintering process were studied using micro-sinter and sinter pot methods. The results sh...The basic characteristics of Australian iron ore concentrate (Ore-A) and its effects on sinter properties during a high-limonite sintering process were studied using micro-sinter and sinter pot methods. The results show that the Ore-A exhibits good granulation properties, strong liquid flow capability, high bonding phase strength and crystal strength, but poor assimilability. With increasing Ore-A ratio, the tumbler index and the reduction index (RI) of the sinter first increase and then decrease, whereas the softening interval (Delta T) and the softening start temperature (T (10%)) of the sinter exhibit the opposite behavior; the reduction degradation index (RDI+3.15) of the sinter increases linearly, but the sinter yield exhibits no obvious effects. With increasing Ore-A ratio, the distribution and crystallization of the minerals are improved, the main bonding phase first changes from silico-ferrite of calcium and aluminum (SFCA) to kirschsteinite, silicate, and SFCA and then transforms to 2CaO center dot SiO2 and SFCA. Given the utilization of Ore-A and the improvement of the sinter properties, the Ore-A ratio in the high-limonite sintering process is suggested to be controlled at approximately 6wt%.展开更多
In this paper a method is developed to model the design process gene based on the extensible basic-element with the purpose of design process optimization and reuse. First, the principle of genetic engineering based d...In this paper a method is developed to model the design process gene based on the extensible basic-element with the purpose of design process optimization and reuse. First, the principle of genetic engineering based design process optimization and reuse is put forward and analyzed. Second, the extensible basic-element model of the design process gene is established based on the models of the design process base and the base pair through analyzing the concept and structure of the design process gene and the extensible basic-element as well as its extensibility. Third, the features of divergence and scalability of the extensible basic-element model of the design process gene are discussed for carrying out the extension translation to the design process gene by way of inserting, deleting and updating design process bases. Finally, an example of building extensible basic-element models for the design process base, base pair and design process gene in mechanical product design and the mutation process of the design process gene in airplane design is presented which demonstrates the application of the method proposed in this paper.展开更多
Under a very general condition (TNC condition) we show that the spectral radius of the kernel of a general branching process is a threshold parameter and hence plays a role as the basic reproduction number in usual ...Under a very general condition (TNC condition) we show that the spectral radius of the kernel of a general branching process is a threshold parameter and hence plays a role as the basic reproduction number in usual CMJ processes. We discuss also some properties of the extinction probability and the generating operator of general branching processes. As an application in epidemics, in the final section we suggest a generalization of SIR model which can describe infectious diseases transmission in an inhomogeneous population.展开更多
基金financially supported by the National Basic Research Program of China (No. 2012CB720401)the National Natural Science Foundation of China (U1260202)
文摘The basic characteristics of Australian iron ore concentrate (Ore-A) and its effects on sinter properties during a high-limonite sintering process were studied using micro-sinter and sinter pot methods. The results show that the Ore-A exhibits good granulation properties, strong liquid flow capability, high bonding phase strength and crystal strength, but poor assimilability. With increasing Ore-A ratio, the tumbler index and the reduction index (RI) of the sinter first increase and then decrease, whereas the softening interval (Delta T) and the softening start temperature (T (10%)) of the sinter exhibit the opposite behavior; the reduction degradation index (RDI+3.15) of the sinter increases linearly, but the sinter yield exhibits no obvious effects. With increasing Ore-A ratio, the distribution and crystallization of the minerals are improved, the main bonding phase first changes from silico-ferrite of calcium and aluminum (SFCA) to kirschsteinite, silicate, and SFCA and then transforms to 2CaO center dot SiO2 and SFCA. Given the utilization of Ore-A and the improvement of the sinter properties, the Ore-A ratio in the high-limonite sintering process is suggested to be controlled at approximately 6wt%.
文摘In this paper a method is developed to model the design process gene based on the extensible basic-element with the purpose of design process optimization and reuse. First, the principle of genetic engineering based design process optimization and reuse is put forward and analyzed. Second, the extensible basic-element model of the design process gene is established based on the models of the design process base and the base pair through analyzing the concept and structure of the design process gene and the extensible basic-element as well as its extensibility. Third, the features of divergence and scalability of the extensible basic-element model of the design process gene are discussed for carrying out the extension translation to the design process gene by way of inserting, deleting and updating design process bases. Finally, an example of building extensible basic-element models for the design process base, base pair and design process gene in mechanical product design and the mutation process of the design process gene in airplane design is presented which demonstrates the application of the method proposed in this paper.
文摘Under a very general condition (TNC condition) we show that the spectral radius of the kernel of a general branching process is a threshold parameter and hence plays a role as the basic reproduction number in usual CMJ processes. We discuss also some properties of the extinction probability and the generating operator of general branching processes. As an application in epidemics, in the final section we suggest a generalization of SIR model which can describe infectious diseases transmission in an inhomogeneous population.