The magnetic lens(Zumbro lens) is a critical part in proton radiography. Traditionally the matched beam for Zumbro lens in proton radiography is a virtual point source beam, which is not suitable for some cases, such ...The magnetic lens(Zumbro lens) is a critical part in proton radiography. Traditionally the matched beam for Zumbro lens in proton radiography is a virtual point source beam, which is not suitable for some cases, such as cylindrical samples. In these cases, a parallel beam is more appropriate. In this paper, a method, which uses quadrupole beamline, is proposed for designing a magnetic lens with parallel beam matched. Theoretical analysis is given. The results show that the matched beam for this lens is indeed parallel beam, while the major merits of Zumbro lens are inherited. Following this method, a theoretical design based on the 11-Me V cyclotron is presented.展开更多
The flexibility in radiotherapy can be improved if patients can be moved between any one of the department’s medical linear accelerators (LINACs) without the need to change anything in the patient’s treatment plan. ...The flexibility in radiotherapy can be improved if patients can be moved between any one of the department’s medical linear accelerators (LINACs) without the need to change anything in the patient’s treatment plan. For this to be possible, the dosimetric characteristics of the various accelerators must be the same, or nearly the same. The purpose of this work is to describe further and compare measurements and parameters after the initial vendor-recommended beam matching of the five LINACs. Deviations related to dose calculations and to beam matched accelerators may compromise treatment accuracy. The safest and most practical way to ensure that all accelerators are within clinical acceptable accuracy is to include TPS calculations in the LINACs matching evaluation. Treatment planning system (TPS) was used to create three photons plans with different field sizes 3 × 3 cm, 10 × 10 cm and 25 × 25 cm at a depth of 4.5 cm in Perspex. Calculated TPS plans were sent to Mosaiq to be delivered by five LINACs. TPS plans were compared with five LINACs measurements data using Gamma analyses of 2% and 2 mm. The results suggest that for four out of the five LINACs, there was generally good agreement, less than a 2% deviation between the planned dose distribution and the measured dose distribution. However, one specific LINAC named “Asterix” exhibited a deviation of 2.121% from the planned dose. The results show that all of the LINACs’ performance were within the acceptable deviation and delivering radiation dose consistently and accurately.展开更多
Particle accelerators are devices used for research in scientific problems such as high energy and nuclear physics.In a particle accelerator, the shape of particle beam envelope is changed dynamically along the forwar...Particle accelerators are devices used for research in scientific problems such as high energy and nuclear physics.In a particle accelerator, the shape of particle beam envelope is changed dynamically along the forward direction. Thus, this reference direction can be considered as an auxiliary "time" beam axis. In this paper, the optimal beam matching control problem for a low energy transport system in a charged particle accelerator is considered. The beam matching procedure is formulated as a finite "time" dynamic optimization problem, in which the Kapchinsky-Vladimirsky(K-V) coupled envelope equations model beam dynamics. The aim is to drive any arbitrary initial beam state to a prescribed target state, as well as to track reference trajectory as closely as possible, through the control of the lens focusing strengths in the beam matching channel. We first apply the control parameterization method to optimize lens focusing strengths, and then combine this with the time-scaling transformation technique to further optimize the drift and lens length in the beam matching channel. The exact gradients of the cost function with respect to the decision parameters are computed explicitly through the state sensitivity-based analysis method. Finally, numerical simulations are illustrated to verify the effectiveness of the proposed approach.展开更多
Phased array radar has been applied broadly because of its sound performance.But signal of phased array radar is of a wide variety of types.Therefore,recognition of phased array radar is the most puzzling aspect of th...Phased array radar has been applied broadly because of its sound performance.But signal of phased array radar is of a wide variety of types.Therefore,recognition of phased array radar is the most puzzling aspect of the whole emitter identification domain.To solve the problem,the article proposes the method that identifies phased array radar by pulse amplitude information,and studies the phased array radar,models transmit signal of them,and receiving signal by radar countermeasure reconnaissance receiver.From constructing template of pulse train's amplitude vector of mechanical scanning radar,computing distance of samples and standard template,finding threshold of the template matching arithmetic,the article puts forward the template matching algorithm of radar beam scan type recognition to identify phased array radar automatically.展开更多
High lattice match growth of InAsSb based materials on GaSb substrates is demonstrated. The present results indicate that a stable substrate temperature and the optimal flux ratios are of critical importance in achiev...High lattice match growth of InAsSb based materials on GaSb substrates is demonstrated. The present results indicate that a stable substrate temperature and the optimal flux ratios are of critical importance in achieving a homogeneous InAsSb based material composition throughout the growth period. The quality of these epilayers is assessed using a high-resolution x-ray diffraction and atomic force microscope. The mismatch between the GaSb substrate and InAsSb alloy achieves almost zero, and the rms surface roughness of InAsSb alloy achieves around 1.7A over an area of 28μm × 28μm. At the same time, the mismatches between GaSb and InAs/InAs0.73Sb0.27 superlattices （SLs） achieve approximately 100 arcsec （75 periods） and zero （300 periods）, with the surface rms roughnesses of InAs/InAs0.73Sb0.27 SLs around 1.8 A （75 periods） and 2.1A （300 periods） over an area of 20 μm×20 μm, respectively. After fabrication and characterization of the devices, the dynamic resistance of the n-barrier-n InAsSb photodetector near zero bias is of the order of 10^6Ω·cm^2. At 77K, the positive-intrinsic-negative photodetectors are demonstrated in InAsSb and InAs/InAsSb SL （75 periods） materials, exhibiting fifty-percent cutoff wavelengths of 3.8μm and 5.1μm, respectively.展开更多
Under three-dimensional plane geometrical constraints ( X,Y,θ ), with two asymmetric achromatic sections, the combined three-section structural FODO-like magnet lattice design is adopted and finely optimized in the S...Under three-dimensional plane geometrical constraints ( X,Y,θ ), with two asymmetric achromatic sections, the combined three-section structural FODO-like magnet lattice design is adopted and finely optimized in the SSRF electron-beam transfer lines. The magnet lattice has high flexibility and robustness, and the Courant–Snyder parameters can be easily adjusted within a wide range to meet the requirements of transmission and injection for different operation modes of the linear accelerator, booster synchrotron, and storage ring. In this article, the main parameters of the linear optics design of the SSRF electron-beam transfer lines are described, involving the physical design criteria, the total geometrical layout, the magnet lattice, and the beam Courant–Snyder parameters matching. The studies of the variant beam dynamic simulation program calculations show that the design purpose of the efficient beam transmission and injection will be basically achieved.展开更多
Millimeter wave(mmWave) communications of unmanned aerial vehicles(UAVs) have drawn dramatic attentions for its flexibility on a variety of applications.Recently,channel tracking base on the spatial features has been ...Millimeter wave(mmWave) communications of unmanned aerial vehicles(UAVs) have drawn dramatic attentions for its flexibility on a variety of applications.Recently,channel tracking base on the spatial features has been proposed to solve the problem of beam misalignments due to the UAV navigation.However,unstable beam pointing caused by the non-ideal beam tracking environment may impact the performance of mmWave systems significantly.In this paper,an improved beamforming method is presented to overcome this shortcoming.Firstly,the effect of the beam deviation is analyzed through the establishment of the equivalent data rate.Then,combining the quantification of spatial angle and the improved orthogonal matching pursuit(OMP) algorithm,an optimized beam corresponding to the beam deviation is obtained.Simulation results show that the optimized beam of the proposed approach can effectively improve the spectral efficiency without improving the complexity when the beam pointing is unstable.展开更多
Due to the fact that traditional ray field tracking approaches require a large number of geometrical optical（GO） ray tubes,they are very inefficient in many practical applications.An improved ray model scheme for a ...Due to the fact that traditional ray field tracking approaches require a large number of geometrical optical（GO） ray tubes,they are very inefficient in many practical applications.An improved ray model scheme for a complex source beam（CSB） tracking technique is proposed in this paper.The source field can be expressed by a superposition of CSBs,then every CSB basis function has a Gaussian-type amplitude distribution and is suitable for replacing a GO ray tube in the ray tracing approach.The complex phase matching technique is adopted to find the reflected beam in the reflection point where local approximation is used to represent the curved surface in its neighborhood.A new solution to multiple reflections using the conventional right-handed reflected system is used to track the field easily.Numerical results show the accuracy of the proposed method.展开更多
A three-dimensional model of the double-slot coupled cavity slow-wave structure （CCSWS） with a solid round elec- tron beam for the beam-wave interaction is presented. Based on the ＂cold＂ dispersion, the ＂hot＂ di...A three-dimensional model of the double-slot coupled cavity slow-wave structure （CCSWS） with a solid round elec- tron beam for the beam-wave interaction is presented. Based on the ＂cold＂ dispersion, the ＂hot＂ dispersion equation is derived with the Maxwell equations by using the variable separation method and the field-matching method. Through numerical calculations, the effects of the electron beam parameters and the staggered angle between adjacent walls on the linear gain are analyzed.展开更多
A linear theory of a rectangular Cerenkov maser （RCM） with a sheet electron beam is developed by using the field- match method. Based on the three-dimensional beam-wave interaction model proposed in this paper, a hy...A linear theory of a rectangular Cerenkov maser （RCM） with a sheet electron beam is developed by using the field- match method. Based on the three-dimensional beam-wave interaction model proposed in this paper, a hybrid-mode dispersion equation and its analytical solution are derived for the RCM. Through numerical calculations, the effects of the beam-grating gap, beam thickness, current density, beam voltage and waveguide width on the linear growth rate axe analysed. Moreover, the performance difference between the RCM with the closed transverse boundary and that with the upper open boundary is compared. The results show that the closed RCM model can avoid the effect of RF radiation on beam-wave interaction, which is more rational for practical applications.展开更多
Estimation of the far-field centre is carried out in beam auto-alignment. In this paper, the features of the far-field of a square beam are presented. Based on these features, a phase-only matched filter is designed, ...Estimation of the far-field centre is carried out in beam auto-alignment. In this paper, the features of the far-field of a square beam are presented. Based on these features, a phase-only matched filter is designed, and the algorithm of centre estimation is developed. Using the simulated images with different kinds of noise and the 40 test images that are taken in sequence, the accuracy of this algorithm is estimated. Results show that the error is no more than one pixel for simulated noise images with a 99% probability, and the stability is restricted within one pixel for test images. Using the improved algorithm, the consumed time is reduced to 0.049 s.展开更多
基金supported by National Natural Science Foundation of China(Nos.11475157,11405162,11205144 and 11176001)CAEP Developing Foundation(No.2014A0402016)+1 种基金CAEP President Foundation(No.201402086)CAEP Key Laboratory Foundation(No.PPL2013PZ09)
文摘The magnetic lens(Zumbro lens) is a critical part in proton radiography. Traditionally the matched beam for Zumbro lens in proton radiography is a virtual point source beam, which is not suitable for some cases, such as cylindrical samples. In these cases, a parallel beam is more appropriate. In this paper, a method, which uses quadrupole beamline, is proposed for designing a magnetic lens with parallel beam matched. Theoretical analysis is given. The results show that the matched beam for this lens is indeed parallel beam, while the major merits of Zumbro lens are inherited. Following this method, a theoretical design based on the 11-Me V cyclotron is presented.
文摘The flexibility in radiotherapy can be improved if patients can be moved between any one of the department’s medical linear accelerators (LINACs) without the need to change anything in the patient’s treatment plan. For this to be possible, the dosimetric characteristics of the various accelerators must be the same, or nearly the same. The purpose of this work is to describe further and compare measurements and parameters after the initial vendor-recommended beam matching of the five LINACs. Deviations related to dose calculations and to beam matched accelerators may compromise treatment accuracy. The safest and most practical way to ensure that all accelerators are within clinical acceptable accuracy is to include TPS calculations in the LINACs matching evaluation. Treatment planning system (TPS) was used to create three photons plans with different field sizes 3 × 3 cm, 10 × 10 cm and 25 × 25 cm at a depth of 4.5 cm in Perspex. Calculated TPS plans were sent to Mosaiq to be delivered by five LINACs. TPS plans were compared with five LINACs measurements data using Gamma analyses of 2% and 2 mm. The results suggest that for four out of the five LINACs, there was generally good agreement, less than a 2% deviation between the planned dose distribution and the measured dose distribution. However, one specific LINAC named “Asterix” exhibited a deviation of 2.121% from the planned dose. The results show that all of the LINACs’ performance were within the acceptable deviation and delivering radiation dose consistently and accurately.
基金supported by the National Natural Science Foundation of China(61703114,61673126,61703217,U1701261)the Science and Technology Plan Project of Guangdong(2014B090907010,2015B010131014)
文摘Particle accelerators are devices used for research in scientific problems such as high energy and nuclear physics.In a particle accelerator, the shape of particle beam envelope is changed dynamically along the forward direction. Thus, this reference direction can be considered as an auxiliary "time" beam axis. In this paper, the optimal beam matching control problem for a low energy transport system in a charged particle accelerator is considered. The beam matching procedure is formulated as a finite "time" dynamic optimization problem, in which the Kapchinsky-Vladimirsky(K-V) coupled envelope equations model beam dynamics. The aim is to drive any arbitrary initial beam state to a prescribed target state, as well as to track reference trajectory as closely as possible, through the control of the lens focusing strengths in the beam matching channel. We first apply the control parameterization method to optimize lens focusing strengths, and then combine this with the time-scaling transformation technique to further optimize the drift and lens length in the beam matching channel. The exact gradients of the cost function with respect to the decision parameters are computed explicitly through the state sensitivity-based analysis method. Finally, numerical simulations are illustrated to verify the effectiveness of the proposed approach.
基金Supported by the National Science and Technology Supported Program of China(No.2011BAH24B06)
文摘Phased array radar has been applied broadly because of its sound performance.But signal of phased array radar is of a wide variety of types.Therefore,recognition of phased array radar is the most puzzling aspect of the whole emitter identification domain.To solve the problem,the article proposes the method that identifies phased array radar by pulse amplitude information,and studies the phased array radar,models transmit signal of them,and receiving signal by radar countermeasure reconnaissance receiver.From constructing template of pulse train's amplitude vector of mechanical scanning radar,computing distance of samples and standard template,finding threshold of the template matching arithmetic,the article puts forward the template matching algorithm of radar beam scan type recognition to identify phased array radar automatically.
基金Supported by the National Natural Science Foundation of China under Grant Nos 11474248,61176127,61006085,61274013 and 61306013the Key Program for International S&T Cooperation Projects of China under Grant No 2011DFA62380the Ph.D. Programs Foundation of the Ministry of Education of China under Grant No 20105303120002
文摘High lattice match growth of InAsSb based materials on GaSb substrates is demonstrated. The present results indicate that a stable substrate temperature and the optimal flux ratios are of critical importance in achieving a homogeneous InAsSb based material composition throughout the growth period. The quality of these epilayers is assessed using a high-resolution x-ray diffraction and atomic force microscope. The mismatch between the GaSb substrate and InAsSb alloy achieves almost zero, and the rms surface roughness of InAsSb alloy achieves around 1.7A over an area of 28μm × 28μm. At the same time, the mismatches between GaSb and InAs/InAs0.73Sb0.27 superlattices （SLs） achieve approximately 100 arcsec （75 periods） and zero （300 periods）, with the surface rms roughnesses of InAs/InAs0.73Sb0.27 SLs around 1.8 A （75 periods） and 2.1A （300 periods） over an area of 20 μm×20 μm, respectively. After fabrication and characterization of the devices, the dynamic resistance of the n-barrier-n InAsSb photodetector near zero bias is of the order of 10^6Ω·cm^2. At 77K, the positive-intrinsic-negative photodetectors are demonstrated in InAsSb and InAs/InAsSb SL （75 periods） materials, exhibiting fifty-percent cutoff wavelengths of 3.8μm and 5.1μm, respectively.
基金Supported by National Important Scientific Project "Shanghai Synchrotron Radiation Facility".
文摘Under three-dimensional plane geometrical constraints ( X,Y,θ ), with two asymmetric achromatic sections, the combined three-section structural FODO-like magnet lattice design is adopted and finely optimized in the SSRF electron-beam transfer lines. The magnet lattice has high flexibility and robustness, and the Courant–Snyder parameters can be easily adjusted within a wide range to meet the requirements of transmission and injection for different operation modes of the linear accelerator, booster synchrotron, and storage ring. In this article, the main parameters of the linear optics design of the SSRF electron-beam transfer lines are described, involving the physical design criteria, the total geometrical layout, the magnet lattice, and the beam Courant–Snyder parameters matching. The studies of the variant beam dynamic simulation program calculations show that the design purpose of the efficient beam transmission and injection will be basically achieved.
基金supported by Aeronautical Science Foundation of China(2017ZC52021)the Fundamental Research Funds for the Central Universities(NS2017066)+1 种基金the Foundation of Graduate Innovation Center in NUAA(kfjj20171501)China Postdoctoral Science Foundation Funded Project(2015M581791)
文摘Millimeter wave(mmWave) communications of unmanned aerial vehicles(UAVs) have drawn dramatic attentions for its flexibility on a variety of applications.Recently,channel tracking base on the spatial features has been proposed to solve the problem of beam misalignments due to the UAV navigation.However,unstable beam pointing caused by the non-ideal beam tracking environment may impact the performance of mmWave systems significantly.In this paper,an improved beamforming method is presented to overcome this shortcoming.Firstly,the effect of the beam deviation is analyzed through the establishment of the equivalent data rate.Then,combining the quantification of spatial angle and the improved orthogonal matching pursuit(OMP) algorithm,an optimized beam corresponding to the beam deviation is obtained.Simulation results show that the optimized beam of the proposed approach can effectively improve the spectral efficiency without improving the complexity when the beam pointing is unstable.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61301056 and 61231001)the Fundamental Research Funds for the Central Universities,China(Grant No.ZYGX2014J012)+2 种基金the Fok Ying Tung Education Foundation,China(Grant No.141062)the Aero-Science Fund,China(Grant No.20142580012)the"111"Project(Grant No.B07046)
文摘Due to the fact that traditional ray field tracking approaches require a large number of geometrical optical（GO） ray tubes,they are very inefficient in many practical applications.An improved ray model scheme for a complex source beam（CSB） tracking technique is proposed in this paper.The source field can be expressed by a superposition of CSBs,then every CSB basis function has a Gaussian-type amplitude distribution and is suitable for replacing a GO ray tube in the ray tracing approach.The complex phase matching technique is adopted to find the reflected beam in the reflection point where local approximation is used to represent the curved surface in its neighborhood.A new solution to multiple reflections using the conventional right-handed reflected system is used to track the field easily.Numerical results show the accuracy of the proposed method.
基金Project supported by the National Natural Science Foundation of China(Grant No.11205162)
文摘A three-dimensional model of the double-slot coupled cavity slow-wave structure （CCSWS） with a solid round elec- tron beam for the beam-wave interaction is presented. Based on the ＂cold＂ dispersion, the ＂hot＂ dispersion equation is derived with the Maxwell equations by using the variable separation method and the field-matching method. Through numerical calculations, the effects of the electron beam parameters and the staggered angle between adjacent walls on the linear gain are analyzed.
基金supported by the National Natural Science Foundation of China (Grant No. 60801031)
文摘A linear theory of a rectangular Cerenkov maser （RCM） with a sheet electron beam is developed by using the field- match method. Based on the three-dimensional beam-wave interaction model proposed in this paper, a hybrid-mode dispersion equation and its analytical solution are derived for the RCM. Through numerical calculations, the effects of the beam-grating gap, beam thickness, current density, beam voltage and waveguide width on the linear growth rate axe analysed. Moreover, the performance difference between the RCM with the closed transverse boundary and that with the upper open boundary is compared. The results show that the closed RCM model can avoid the effect of RF radiation on beam-wave interaction, which is more rational for practical applications.
基金Project supported by the National High Technology Research and Development Program of China (Grant No 007SQ804)Japan-Korea-China Cooperative Project on High Energy Density Science for Laser Fusion Energy
文摘Estimation of the far-field centre is carried out in beam auto-alignment. In this paper, the features of the far-field of a square beam are presented. Based on these features, a phase-only matched filter is designed, and the algorithm of centre estimation is developed. Using the simulated images with different kinds of noise and the 40 test images that are taken in sequence, the accuracy of this algorithm is estimated. Results show that the error is no more than one pixel for simulated noise images with a 99% probability, and the stability is restricted within one pixel for test images. Using the improved algorithm, the consumed time is reduced to 0.049 s.
