Tight Focusing Properties of Radially Polarized Gaussian Beams with Pair of Vortices

The tight focusing properties of a radially polarized Gaussian beam with a nested pair of vortices having a radial wave front distribution are investigated theoretically by the vector diffraction theory. The results show that the optical intensity in the focal region can be altered considerably by changing the location of the vortices nested in a radially polarized Gaussian beam. It is noted that focal evolution from one annular focal pattern to a highly confined focal spot in the transverse direction is observed corresponding to the change in the location of the optical vortices in the input plane. It is also observed that the generated focal hole or spot lead to a focal shift along the optical axis remarkably under proper radial phase modulation. Hence the proposed system may be applied to construct tunable optical traps for both high and low refractive index particles.

Short beam shear properties and failure modes of the wood-based X-type lattice sandwich structure

A wood-based X-type lattice sandwich structure was manufactured by insertion-glue method.The birch was used as core,and Oriented Strand Board was used as panel of the sandwich structure.The short beam shear properties and the failure modes of the wood-based X-type lattice sandwich structure with different core direction(vertical and parallel),unit specification(120 mm×60 mm and 60 mm×60 mm),core size(50 mm and 60 mm),and drilling depth(9 mm and 12 mm)were investigated by a short beam shear test and the establishment of a theoretical model to study the equivalent shear modulus and deflection response of the X-type lattice sandwich structure.Results from the short beam shear test and the theoretical model showed that the failure modes of the wood-based X-type lattice sandwich structure were mainly the wrinkling and crushing of the panels under three-point bending load.The experimental values of deflection response of various type specimens were higher than the theoretical values of them.For the core direction of parallel,the smaller the unit specification is,the shorter the core size is,and the deeper the drilling depth is,the greater the short beam shear properties of the wood-based X-type lattice sandwich structure is.

Focusing Properties of Partially Coherent Controllable Dark-Hollow Beams through a Thin Lens

Analytical propagation formulas are derived for partially coherent controllable dark-hollow beams （CDHBs） through a thin lens based on the generalized Huygens-Fresnel integral. The expressions of the position for maximum irradiance on-axis and the relative focal shift are evaluated by the analytical propagation formulas. Our numerical results show that both the relative focal shift and the effective beam width of focused partially coherent CDHBs are mainly determined by the initial transverse coherence width 6g and the Fresnel number Nw, which are also affected by the changes of both the dark-size adjusting parameter p and the order N of CDHBs.

Tight Focusing Properties of Azimuthally Polarized Pair of Vortex Beams through a Dielectric Interface

Tight focusing properties of an azimuthally polarized Gaussian beam with a pair of vortices through a dielectric interface is theoretically investigated by vector diffraction theory. For the incident beam with a pair of vortices of opposite topological charges, the vortices move toward each other, annihilate and revive in the vicinity of focal plane, which results in the generation of many novel focal patterns. The usable focal structures generated through the tight focusing of the double-vortex beams may find applications in micro-particle trapping, manipulation, and material processing, etc.

Phase Control of Transient Optical Properties of Double Coupled Quantum-Dot Nanostructure via Gaussian Laser Beams

We theoretically analyze the transient properties of a probe field absorption and dispersion in a coupled semiconductor double-quantum-dot nanostructure.We show that in the presence of the Gaussian laser beams,absorption and dispersion of the probe field can be dramatically influenced by the relative phase between applied fields and intensity of the Gaussian laser beams.Transient and steady-state behaviors of the probe field absorption and dispersion are discussed to estimate the required switching time.The estimated range is between 5-8 ps for subluminal to superluminal light propagation.

Metamaterial beam scanning leaky-wave antenna based on quarter mode substrate integrated waveguide structure

In this paper, we first propose a metamaterial structure by etching the same two interdigital fingers on the upper ground of quarter mode substrate integrated waveguide（QMSIW）. The simulated results show that the proposed QMSIWbased metamaterial has a continuous phase constant changing from negative to positive values within its passband. A periodic leaky-wave antenna（LWA）, which consists of 11 QMSIW-based metamaterial unit cells, is designed, fabricated,and measured. The measured results show that the fabricated antenna achieves a continuous beam scanning property from backward-43° to forward ＋32° over an operating frequencyrange of 8.9 GHz–11.8 GHz with return loss better than 10 d B.The measured antenna gain keeps consistent with the variation of less than 2 d B over the operating frequency range with a maximum gain of 12 d B. Besides, the measured and simulated results are in good agreement with each other, indicating the significance and effectiveness of this method.

Copper Ion Beam Irradiation-Induced Effects on Structural,Morphological and Optical Properties of Tin Dioxide Nanowires

The 0.8 Me V copper （ Cu） ion beam irradiation-induced effects on structural, morphological and optical properties of tin dioxide nanowires （Sn02 NWs） are investigated. The samples are irradiated at three different doses 5 × 10^12 ions/cm2, 1 ×10^13 ions/cm2 and 5 × 10^13 ions/em2 at room temperature. The XRD analysis shows that the tetragonal phase of Sn02 NWs remains stable after Cu ion irradiation, but with increasing irradiation dose level the crystal size increases due to ion beam induced coalescence of NWs. The FTIR spectra of pristine Sn02 NWs exhibit the chemical composition of SnO2 while the Cn-O bond is also observed in the FTIR spectra after Cu ion beam irradiation. The presence of Cu impurity in SnO2 is further confirmed by calculating the stopping range of Cu ions by using TRM/SRIM code. Optical properties of SnO2 NWs are studied before and after Cu ion irradiation. Band gap analysis reveMs that the band gap of irradiated samples is found to decrease compared with the pristine sample. Therefore, ion beam irradiation is a promising technology for nanoengineering and band gap tailoring.

THE ASYMPTOTIC PROPERTIES OF HIGH FREQUENCIES FOR BARS,BEAMS AND MEMBRANES

In this paper, a uniform analysis of the asymptotic properties of high frequencies of non-uniform bars, beams and circular membranes is given by using perturbation method, and the ease of discontinuous physical parameters is also discussed.

Dependence of Structural and Optoelectrical Properties on the Composition of Electron Beam Evaporated Zn_xCd_(1-x)S Thin Films

Thin films of ZnxCd1-xS have been prepared by electron beam evaporation of a mixture of ZnS & CdS powders. The films are deposited onto sodalime glass slides under similar conditions.The composition of the films is varied from CdS to ZnS (x=0 to 1). The films show a regular change in color from toner red to orange yellow as Zn concentration increases to maximum.These films are characterized for their optical, electricaI and structural properties. The bandgap value of ZnxCd1-xS films is found to vary linearIy from 2.20 eV to 3.44 eV with change in the x value from 0 to 1. The resistivity of these films is in the range of 171.0 Ωcm to 5.5× 106Ωcm for x=0~0.6. All the samples show cubic structure after annealing in air at 250℃ for 40 min.The lattice constant ao varies from 0.5884 nm to 0.54109 nm linearly.

Structure and Magnetic Properties of Fe-N Films Prepared by Dual Ion Beam Sputtering

Fe-N films were prepared on Si substrate by dual ion beam sputtering (DIBS). It is found that the crystal structure of the films varies from α-Fe, to ε-Fe2-3N, ε-Fe2-3N +γ-Fe4N, and finally γ'-Fe4N with the increase in substrate temperature (TS). The magnetic properties of the films were investigated by a vibrating sample magnetometer (VSM). The structure of the films is insensitive to the ratios of N2/Ar in main ion source(MIS), and is mainly influenced by the substrate temperature (Ts).

Tight Focusing Properties of Phase Modulated Radially Polarized Laguerre Bessel Gaussian Beam

We propose a new approach for generating a multiple focal spot segment of subwavelength size, by tight focusing of a phase modulated radially polarized Laguerre Bessel Gaussian beam. The focusing properties are investigated theoretically by .vector diffraction theory. We observe that the focal segment with multiple focal structures is separated with different axial distances and a super long dark channel can be generated by properly tuning the phase of the incident radially polarized Laguerre Bessel Gaussian beam. We presume that such multiple focal patterns and high intense beam may find applications in atom optics, optical manipulations and multiple optical trapping.

The nonparaxial property of chirped pulsed beam

The nonparaxial property of the chirped pulsed beam is analyzed both quantitatively and qualitatively. Through the qualitative investigation of the paraxial approximation condition, we show there are chirp-induced changes in the nonparaxial propagation of the chirped pulsed beam. A quantitative nonparaxial correction was developed by use of the perturbational technic and the Fourier transform for a few-cycle chirped pulsed beam with relative small chirp parameter. It was shown that the nonparaxial corrections were enhanced near the leading or trailing edge of pulse depending on weather the chirp parameter is positive or negative. An example for pulsed Gaussian beam driven by a chirped Gaussian pulse is shown in the numerical result to confirm our analysis.

Electron Beam Melted Beta-type Ti–24Nb–4Zr–8Sn Porous Structures With High Strength-to-Modulus Ratio

Electron beam melting （EBM） has been used to manufacture β-type Ti-24Nb-4Zr-8Sn porous compo- nents with 70% porosity, EBM-produced components have favorable structural features （i.e. smooth strut surfaces, fewer defects） and an （α ＋ β）-type microstructure, similar to that subjected to aging treat- ment. EBM-produced components exhibit more than twice the strength-to-modulus ratio of porous Ti- 6A1-4V components having the same porosity. The processing-microstructure-property relationship and deformation behavior of EBM-produced components are discussed in detail. Such porous titanium com- ponents composed of non-toxic elements and having high strength-to-modulus ratio are highly attractive for biomedical applications.