A novel method for designing a beam-switching antenna with the plane dipole is presented. The antenna is composed of double dipoles placed at the center of an active square structure that is divided in four equal sect...A novel method for designing a beam-switching antenna with the plane dipole is presented. The antenna is composed of double dipoles placed at the center of an active square structure that is divided in four equal sectors by metallic sheets. Metallic patches at the outside of the structure are used to enhance the radiation performance of the antenna. In each step, the diodes in one sector are on, whereas other diodes are off. The sector with off-state diodes defines the direction of the radiation pattern. An antenna model is designed on the substrate of FR4. The proposed antenna operates from 4.8 GHz to 5.5 GHz with gain of 6.3 dBi and F/B （front to back ratio） of 13.2 dBi when the operating frequency is 5.2 GHz. The antenna radiation pattern can be swept in the entire azimuth plane in four steps with a 3 dB beamwidth of 90%. The results reveal that the antenna could be used in the base station of the wireless communication systems.展开更多
This study introduces a new design of planar antenna array for ISM band applications at 2.4 GHz. This prototype is switched beam antenna, namely planar antenna with four meandered slotted triangular elements (PAFMSTE)...This study introduces a new design of planar antenna array for ISM band applications at 2.4 GHz. This prototype is switched beam antenna, namely planar antenna with four meandered slotted triangular elements (PAFMSTE), which is proposed for wireless indoor applications. The Base Station (BS) equipped with this planar antenna is preferred to be at the center position on the room ceiling to cover all sectors of the room. It is designed to use four directional triangular elements arranged to form a square planar antenna array. The PAFMSTE is used to obtain optimal directivity in four directions in azimuth plane with 3 dB beamwidth of 90°at a specific orientation of 30°in elevation plane. Switched parasitic technique is used to enable PAFMSTE to steer a directional beam through four locations by using four PIN diodes switches. The High Frequency Structure Simulator (HFSS) is used as an efficient simulation tool to optimize the performance of the PAFMSTE antenna. The fabrication and measurements of the PAFMSTE antenna are introduced. The proposed antenna enable radio positioning via Angle of Arrival (AOA) information collected from nearby devices. Then, the Cramér-Rao Bound (CRB) is presented for AOA estimation using identically and equally spaced antenna elements. The CRB depends on the directivity, where the maximum values of CRB are 1.35 × 10<sup>-3</sup> and 8 × 10<sup>-3</sup> at HPBW of 60° and 90°, respectively.展开更多
A dual S shaped micro strip antenna with a realistic feed is proposed for generation of tilted beam radiation pattern pertaining for beam steering applications. To achieve this, four feeding points are located at a di...A dual S shaped micro strip antenna with a realistic feed is proposed for generation of tilted beam radiation pattern pertaining for beam steering applications. To achieve this, four feeding points are located at a distance of 5.6 mm from the antenna centre. These feeding points when excited one by one generate four tilted beams in four different space quadrants, thus yielding a beam steerable antenna, Importantly, since the proposed antenna is symmetrical in the structure, all the four tilted beams have the same radiation pattern characteristics. A further enhancement of the antenna bandwidth is also achieved using 100-μn capacitive coupling between the feed and the antenna strip.展开更多
Today, the significance of the wireless communication is known all over the world. In order to achieve the better communication, many techniques and methods have been introduced. Among these techniques, smart/adaptive...Today, the significance of the wireless communication is known all over the world. In order to achieve the better communication, many techniques and methods have been introduced. Among these techniques, smart/adaptive antennas are trending topic in the research domain. The smart antennas consist of various antennas arrays and have the ability to optimize the radia-tion and reception of the desired signals dynamically. Also, in order to avoid or mitigate the interferences, smart antennas can introduce nulls in the in-terferers direction by adaptive updating of the weights linked at every antenna element. The smart antennas can also enhance the quality of reception and reduce the dropped calls. This paper discusses the various survey topics related to smart antennas, Adaptive Beam Forming (ABF) algorithm etc. Also the various existing researches are discussed to know the research gap for future research scope.展开更多
基金supported by the Chongqing Municipal Science and Technology Commission of Natural Science Foundation of China under Grant No.cstcjjA40013
文摘A novel method for designing a beam-switching antenna with the plane dipole is presented. The antenna is composed of double dipoles placed at the center of an active square structure that is divided in four equal sectors by metallic sheets. Metallic patches at the outside of the structure are used to enhance the radiation performance of the antenna. In each step, the diodes in one sector are on, whereas other diodes are off. The sector with off-state diodes defines the direction of the radiation pattern. An antenna model is designed on the substrate of FR4. The proposed antenna operates from 4.8 GHz to 5.5 GHz with gain of 6.3 dBi and F/B （front to back ratio） of 13.2 dBi when the operating frequency is 5.2 GHz. The antenna radiation pattern can be swept in the entire azimuth plane in four steps with a 3 dB beamwidth of 90%. The results reveal that the antenna could be used in the base station of the wireless communication systems.
文摘This study introduces a new design of planar antenna array for ISM band applications at 2.4 GHz. This prototype is switched beam antenna, namely planar antenna with four meandered slotted triangular elements (PAFMSTE), which is proposed for wireless indoor applications. The Base Station (BS) equipped with this planar antenna is preferred to be at the center position on the room ceiling to cover all sectors of the room. It is designed to use four directional triangular elements arranged to form a square planar antenna array. The PAFMSTE is used to obtain optimal directivity in four directions in azimuth plane with 3 dB beamwidth of 90°at a specific orientation of 30°in elevation plane. Switched parasitic technique is used to enable PAFMSTE to steer a directional beam through four locations by using four PIN diodes switches. The High Frequency Structure Simulator (HFSS) is used as an efficient simulation tool to optimize the performance of the PAFMSTE antenna. The fabrication and measurements of the PAFMSTE antenna are introduced. The proposed antenna enable radio positioning via Angle of Arrival (AOA) information collected from nearby devices. Then, the Cramér-Rao Bound (CRB) is presented for AOA estimation using identically and equally spaced antenna elements. The CRB depends on the directivity, where the maximum values of CRB are 1.35 × 10<sup>-3</sup> and 8 × 10<sup>-3</sup> at HPBW of 60° and 90°, respectively.
基金the European Union through the Welsh As-sembly Government
文摘A dual S shaped micro strip antenna with a realistic feed is proposed for generation of tilted beam radiation pattern pertaining for beam steering applications. To achieve this, four feeding points are located at a distance of 5.6 mm from the antenna centre. These feeding points when excited one by one generate four tilted beams in four different space quadrants, thus yielding a beam steerable antenna, Importantly, since the proposed antenna is symmetrical in the structure, all the four tilted beams have the same radiation pattern characteristics. A further enhancement of the antenna bandwidth is also achieved using 100-μn capacitive coupling between the feed and the antenna strip.
文摘Today, the significance of the wireless communication is known all over the world. In order to achieve the better communication, many techniques and methods have been introduced. Among these techniques, smart/adaptive antennas are trending topic in the research domain. The smart antennas consist of various antennas arrays and have the ability to optimize the radia-tion and reception of the desired signals dynamically. Also, in order to avoid or mitigate the interferences, smart antennas can introduce nulls in the in-terferers direction by adaptive updating of the weights linked at every antenna element. The smart antennas can also enhance the quality of reception and reduce the dropped calls. This paper discusses the various survey topics related to smart antennas, Adaptive Beam Forming (ABF) algorithm etc. Also the various existing researches are discussed to know the research gap for future research scope.
