Fine-grained silt is widely distributed in the Huanghe River Delta(HRD)in China,and the sedimentary structure is complex,meaning that the clay content in the silt is variable.The piezocone penetration test(CPTu)is the...Fine-grained silt is widely distributed in the Huanghe River Delta(HRD)in China,and the sedimentary structure is complex,meaning that the clay content in the silt is variable.The piezocone penetration test(CPTu)is the most widely approved in situ test method.It can be used to invert soil properties and interpret soil behavior.To analyse the strength properties of surface sediments in the HRD,this paper evaluated the friction angle and its inversion formula through the CPTu penetration test and monotonic simple shear test and other soil unit experiments.The evaluation showed that the empirical formula proposed by Kulhawy and Mayne had better prediction and inversion effect.The HRD silts with clay contents of 9.2%,21.4%and 30.3%were selected as samples for the CPTu variable rate penetration test.The results show as follows.(1)The effects of the clay content on the tip resistance and the pore pressure of silt under different penetration rates were summarized.The tip resistance Q_t is strongly dependent on the clay content of the silt,the B_(q)value of the silt tends to 0 and is not significantly affected by the change of the CPTu penetration rate.(2)Five soil behavior type classification charts and three soil behavior type indexes based on CPTu data were evaluated.The results show that the soil behavior type classification chart based on soil behavior type index ISBT,the Robertson 2010 behavior type classification chart are more suitable for the silty soil in the HRD.展开更多
Work-hardening behaviour of type 316 austenitic stainless steel having difFerent initial dislocation structures introduced by swaging to various levels is analysed by a simplified Kock's model which takes into acc...Work-hardening behaviour of type 316 austenitic stainless steel having difFerent initial dislocation structures introduced by swaging to various levels is analysed by a simplified Kock's model which takes into account the structural changes through the dislocation accumulation and annihilation process during deformation. The dislocation accumulation and annihilation factors show a temperature and structure dependence. The dislocation annihilation factor shows a plateau or decreasing tendency in the dynamic strain ageing (DSA) temperature range. This is attributed as either due to dislocation accumulation being more pronounced than dislocation annihilation or as due to precipitates being formed at DSA temperatures acting as obstacles to dislocation motion in the DSA temperature range.展开更多
The Mg2Ni-type alloys with nominal compositions of Mg20Ni10-xCox(x=0,1,2,3,4,%,mass fraction) were prepared by melt-spinning technology.The structures of the alloys were studied by XRD,SEM and HRTEM.The hydrogen absor...The Mg2Ni-type alloys with nominal compositions of Mg20Ni10-xCox(x=0,1,2,3,4,%,mass fraction) were prepared by melt-spinning technology.The structures of the alloys were studied by XRD,SEM and HRTEM.The hydrogen absorption/desorption kinetics and the electrochemical performances of the alloys were measured.The results show that no amorphous phase forms in the as-spun Co-free alloy,but the as-spun alloys containing Co show a certain amount of amorphous phase.The hydrogen absorption capacities of the as-cast alloys first increase and then decrease with the incremental change of Co content.The hydrogen desorption capacities of as-cast and spun alloys rise with increasing Co content.The melt spinning significantly improves the hydrogenation and dehydrogenation capacities and kinetics of the alloys.The substitution of Co for Ni clearly enhances the discharge capacities of the alloys and the cycle stability of the as-spun alloys.展开更多
以A型行为问卷对210名高血压病人和203名正常对照组进行了测试。发现在≥56岁的高血压病人中,问卷得分显著高于同龄对照组。伴有短暂脑缺血发作的病人,其 A 型行为类型的比例又显著高于无此并发症的病人相对照组。在行为因子中,时间紧...以A型行为问卷对210名高血压病人和203名正常对照组进行了测试。发现在≥56岁的高血压病人中,问卷得分显著高于同龄对照组。伴有短暂脑缺血发作的病人,其 A 型行为类型的比例又显著高于无此并发症的病人相对照组。在行为因子中,时间紧迫感、争强好胜、易激惹是老年人高血压最突出的靶行为。展开更多
基金The National Natural Science Foundation of China under contract No.U2006213。
文摘Fine-grained silt is widely distributed in the Huanghe River Delta(HRD)in China,and the sedimentary structure is complex,meaning that the clay content in the silt is variable.The piezocone penetration test(CPTu)is the most widely approved in situ test method.It can be used to invert soil properties and interpret soil behavior.To analyse the strength properties of surface sediments in the HRD,this paper evaluated the friction angle and its inversion formula through the CPTu penetration test and monotonic simple shear test and other soil unit experiments.The evaluation showed that the empirical formula proposed by Kulhawy and Mayne had better prediction and inversion effect.The HRD silts with clay contents of 9.2%,21.4%and 30.3%were selected as samples for the CPTu variable rate penetration test.The results show as follows.(1)The effects of the clay content on the tip resistance and the pore pressure of silt under different penetration rates were summarized.The tip resistance Q_t is strongly dependent on the clay content of the silt,the B_(q)value of the silt tends to 0 and is not significantly affected by the change of the CPTu penetration rate.(2)Five soil behavior type classification charts and three soil behavior type indexes based on CPTu data were evaluated.The results show that the soil behavior type classification chart based on soil behavior type index ISBT,the Robertson 2010 behavior type classification chart are more suitable for the silty soil in the HRD.
文摘Work-hardening behaviour of type 316 austenitic stainless steel having difFerent initial dislocation structures introduced by swaging to various levels is analysed by a simplified Kock's model which takes into account the structural changes through the dislocation accumulation and annihilation process during deformation. The dislocation accumulation and annihilation factors show a temperature and structure dependence. The dislocation annihilation factor shows a plateau or decreasing tendency in the dynamic strain ageing (DSA) temperature range. This is attributed as either due to dislocation accumulation being more pronounced than dislocation annihilation or as due to precipitates being formed at DSA temperatures acting as obstacles to dislocation motion in the DSA temperature range.
基金Project(2006AA05Z132) supported by the National High-tech Research and Development Program of ChinaProjects(50871050,50701011) supported by the National Natural Science Foundation of China+1 种基金Project(200711020703) supported by Natural Science Foundation of Inner Mongolia,ChinaProject(NJzy08071) supported by High Education Science Research Program of Inner Mongolia,China
文摘The Mg2Ni-type alloys with nominal compositions of Mg20Ni10-xCox(x=0,1,2,3,4,%,mass fraction) were prepared by melt-spinning technology.The structures of the alloys were studied by XRD,SEM and HRTEM.The hydrogen absorption/desorption kinetics and the electrochemical performances of the alloys were measured.The results show that no amorphous phase forms in the as-spun Co-free alloy,but the as-spun alloys containing Co show a certain amount of amorphous phase.The hydrogen absorption capacities of the as-cast alloys first increase and then decrease with the incremental change of Co content.The hydrogen desorption capacities of as-cast and spun alloys rise with increasing Co content.The melt spinning significantly improves the hydrogenation and dehydrogenation capacities and kinetics of the alloys.The substitution of Co for Ni clearly enhances the discharge capacities of the alloys and the cycle stability of the as-spun alloys.
