Study on the pattern of train arrival headway time in high-speed railway

Purpose-The design goal for the tracking interval of high-speed railway trains in China is 3 min,but it is difficult to achieve,and it is widely believed that it is mainly limited by the tracking interval of train arrivals.If the train arrival tracking interval can be compressed,it will be beneficial for China's high-speed railway to achieve a 3-min train tracking interval.The goal of this article is to study how to compress the train arrival tracking interval.Design/methodologylapproach-By simulating the process of dense train groups arriving at the station and stopping,the headway between train arrivals at the station was calculated,and the pattern of train arrival headway was obtained,changing the traditional understanding that the train arrival headway is considered the main factor limiting the headway of trains.Findings-When the running speed of trains is high,the headway between trains is short,the length of the station approach throat area is considerable and frequent train arrivals at the station,the arrival headway for the first group or several groups of trains will exceed the headway,but the subsequent sets of trains will havea headway equal to the arrival headway.This convergence characteristic is obtained by appropriately increasing the running time.Originality/value-According to this pattern,there is no need to overly emphasize the impact of train arrival headway on the headway.This plays an important role in compressing train headway and improving high-speedrailwaycapacity.

Key technologies of earthquake early warning system for China’s high-speed railway

Purpose–The purpose of this study is to introduce the top-level design ideas and the overall architecture of earthquake early-warning system for high speed railways in China,which is based on P-wave earthquake early-warning and multiple ways of rapid treatment.Design/methodology/approach–The paper describes the key technologies that are involved in the development of the system,such as P-wave identification and earthquake early-warning,multi-source seismic information fusion and earthquake emergency treatment technologies.The paper also presents the test results of the system,which show that it has complete functions and its major performance indicators meet the design requirements.Findings–The study demonstrates that the high speed railways earthquake early-warning system serves as an important technical tool for high speed railways to cope with the threat of earthquake to the operation safety.The key technical indicators of the system have excellent performance:The first report time of the P-wave is less than three seconds.From the first arrival of P-wave to the beginning of train braking,the total delay of onboard emergency treatment is 3.63 seconds under 95%probability.The average total delay for power failures triggered by substations is 3.3 seconds.Originality/value–The paper provides a valuable reference for the research and development of earthquake early-warning system for high speed railways in other countries and regions.It also contributes to the earthquake prevention and disaster reduction efforts.

Behaviour of non-ballast pre-stressed and precast track structures in high speed railway based on multiscale finite element model

In order to make further study on the mechanical property of CRTSIII type slab non-ballast track structures,which was self-designed in China,based on the method of the multiscale finite element model(FEM),the traditional FEM of slab non-ballast track structures was improved.The multiscale FEM of CRTSII type slab nonballast track structures was established based on the general finite element program ABAQUs.Then the comparative calculation was made between various FEMs,showing that the high solution precision,fast modelling speed and high solution efficiency could be obtained.Therefore,the multiscale FEM was suitable for the parametric study on mechanical behaviour of CRTSII type slab non-ballast track structures,and then the key influence factor and constructions could be optimized.

Current situation and development trend of design methods for subgrade structure of high speed railways

Purpose–This method will become a new development trend in subgrade structure design for high speed railways.Design/methodology/approach–This paper summarizes the structural types and design methods of subgrade bed for high speed railways in China,Japan,France,Germany,the United States and other countries based on the study and analysis of existing literature and combined with the research results and practices of high speed railway subgrade engineering at home and abroad.Findings–It is found that in foreign countries,the layered reinforced structure is generally adopted for the subgrade bed of high speed railways,and the unified double-layer or multi-layer structure is adopted for the surface layer of subgrade bed,while the simple structure is adopted in China;in foreign countries,different inspection parameters are adopted to evaluate the compaction state of fillers according to their respective understanding and practice,while in China,compaction coefficient,subsoil coefficient and dynamic deformation modulus are adopted for such evaluation;in foreign countries,the subgrade top deformation control method,the subgrade bottom deformation control method,the subsurface fill strength control method are mainly adopted in subgrade bed structure design of high speed railways,while in China,dynamic deformation control of subgrade surface and dynamic strain control of subgrade bed bottom layer is adopted in the design.However,the cumulative deformation of subgrade caused by train cyclic vibration load is not considered in the existing design methods.Originality/value–This paper introduces a new subgrade structure design method based on whole-process dynamics analysis that meets subgrade functional requirements and is established on the basis of the existing research at home and abroad on prediction methods for cumulative deformation of subgrade soil.

Development of rail technology for high speed railway in China

Purpose–The purpose of this paper is to summarize the status and characteristics of rail technology of high-speed railway in China,and point out the development direction of rail technology of high-speed railway.Design/methodology/approach–This study reviews the evolution of high-speed rail standards in China,comparing their chemical composition,mechanical attributes and geometric specifications with EN standards.It delves into the status of rail production technology,shifts in key performance indicators and the quality characteristics of rails.The analysis further examines the interplay between wheels and rails,the implementation of grinding technology and the techniques for inspecting rail service conditions.It encapsulates the salient features of rail operation and maintenance within the high-speed railway ecosystem.The paper concludes with an insightful prognosis of high-speed railway technology development in China.Findings–The rail standards of high-speed railway in China are scientific and advanced,highly operational and in line with international standards.The quality and performance of rail in China have reached the world’s advanced level.The 60N profile guarantees the operation quality of wheel–rail interaction effectively.The rail grinding technology system scientifically guarantees the long-term good service performance of the rail.The rail service state detection technology is scientific and efficient.The rail technology will take“more intelligent”and“higher speed”as the development direction to meet the future needs of high-speed railway in China.Originality/value–The development direction of rail technology for high-speed railway in China is defined,which will promote the continuous innovation and breakthrough of rail technology.

Medium-term forecast of daily passenger volume of high speed railway based on DLP-WNNMedium-term forecast of dailypassenger volume of high speedrailway based on DLP-WNN

Purpose – This paper aims to propose a medium-term forecast model for the daily passenger volume of HighSpeed Railway (HSR) systems to predict the daily the Origin-Destination (OD) daily volume formultiple consecutivedays (e.g. 120 days).Design/methodology/approach – By analyzing the characteristics of the historical data on daily passengervolume of HSR systems, the date and holiday labels were designed with determined value ranges.In accordance to the autoregressive characteristics of the daily passenger volume of HSR, the Double LayerParallel Wavelet Neural Network (DLP-WNN) model suitable for the medium-term (about 120 d) forecast of thedaily passenger volume of HSR was established. The DLP-WNN model obtains the daily forecast result byweighed summation of the daily output values of the two subnets. Subnet 1 reflects the overall trend of dailypassenger volumes in the recent period, and subnet 2 the daily fluctuation of the daily passenger volume toensure the accuracy of medium-term forecast.Findings – According to the example application, in which the DLP-WNN modelwas used for the medium-termforecast of the daily passenger volumes for 120 days for typical O-D pairs at 4 different distances, the averageabsolute percentage error is 7%-12%, obviously lower than the results measured by the Back Propagation (BP)neural network, the ELM (extreme learning machine), the ELMAN neural network, the GRNN (generalizedregression neural network) and the VMD-GA-BP. The DLP-WNN model was verified to be suitable for themedium-term forecast of the daily passenger volume of HSR.Originality/value – This study proposed a Double Layer Parallel structure forecast model for medium-termdaily passenger volume (about 120 days) of HSR systems by using the date and holiday labels and WaveletNeural Network. The predict results are important input data for supporting the line planning, scheduling andother decisions in operation and management in HSR systems.

Model test on dynamic characteristics of invert and foundation soils of high-speed railway tunnel

A dynamic model test(CL = 4) at different velocities of train,namely different loading frequencies,is carried out to study the dynamic characteristics of a high-speed railway tunnel invert and its foundation soils.Not only are the accelerations,dynamic coefficients,dynamic stresses of the invert and foundation soils emphatically analyzed,their relationship with the velocity of the train are discussed in detail.Through laboratory testing,the attenuation of vibration propagating from up the rails is obtained and the calculation formula of the speed influence coefficient of the tunnel invert is preliminarily established.The depth of the foundation soils influenced by vibration is also determined in this study.It is shown that the responses of the tunnel invert and foundation soils to vibration are slightly increased with the velocity of the train;circumferential stresses in the bottom of the invert are tensile stresses and maximum stresses appear under the foot of the rails;the dynamic soil pressures of the foundation decrease quickly with the distance away from the tunnel invert and an exponential relationship exists between them.

Stationarity Intervals of Time-Variant Channel in High Speed Railway Scenario

The non-stationary behavior, caused by the train rmverrent, is the rmin factor for the variation of high speed railway channel. To measure the tirce-variant effect, the parameter of stationarity interval, in which the channel keeps constant or has no great change, is adopted based on Zhengzfiou- Xi＇an （Zhengxi） passenger dedicated line measurement with different train speeds. The stationarity interval is calculated through the definition of Local Region of Stationarity （LRS） under three train ve- locities. Furthermore, the time non-stationary characteristic of high speed pared with five standard railway channel is corn- Multiple-Input MultipleOutput （MIMO） channel models, i.e. Spatial Channel Model （SCM）, extended version of SCM （SCME）, Wireless World Initiative New Radio Phase II （WINNERII）, International Mobile Teleconmnications-Advanced （IMT-Advanced） and WiMAX models which contain the high speed moving scenario. The stationarity interval of real channel is 9 ms in 80% of the cases, which is shorter than those of the standard models. Hence the real channel of high speed railway changes more rapidly. The stationarity intervals of standard models are different due to different modeling methods and scenario def- initions. And the compared results are instructive for wireless system design in high speed railway.

Rotational Friction Damper’s Performance for Controlling Seismic Response of High Speed Railway Bridge-Track System

CRTS-II slab ballastless track on bridge is a unique system in China high speed railway.The application of longitudinal continuous track system has obviously changed dynamic characteristics of bridge structure.The bridge system and CRTS-II track system form a complex nonlinear system.To investigate the seismic response of high speed railway(HSR)simply supported bridge-track system,nonlinear models of three-span simply supported bridge with piers of different height and CRTS-II slab ballastless track system are established.By seismic analysis,it is found that shear alveolar in CRTS-II track system is more prone to be damaged than bridge components,such as piers,girders and bearings.The result shows that the inconsistent displacement of bridge girders is the main cause of the CRTS-II track system’s damage.Then the rotational friction damper(RFD)is adopted,which utilizes the device’s rotation and friction to dissipate seismic energy.The hysteretic behavior of RFD is studied by numerical and experimental methods.Results prove that RFD can provide good hysteretic energy dissipation ability with stable performance.Furthermore,the analysis of RFD’s influence on seismic response of HSR bridge-track system shows that RFD with larger sliding force is more effective in controlling excessive inconsistent displacement where RFD is installed,though response of other bridge spans could slightly deteriorated.

Wireless Relay Communication on High Speed Railway：Full Duplex or Half Duplex？

In this paper,we introduce one full-duplex(FD) relaying transmission scheme for high speed railway and compare its ergodic capacity and outage performance with half-duplex(HD) relaying scheme. Both decode-and-forward(DF) amplify-and-forward(AF) relay modes are considered. Moreover,the carriage penetration loss(CPL) and the self-interference(SI) cancellation ratio are investigated. We derive the closed-form expressions for the outage probability and ergodic capacity of both HD and FD relay transmission schemes. It is shown that when CPL is larger than a certain level,the FD relay can achieve better performance in terms of capacity and keep the outage probability in a low level. It is also found that three factors: AF or DF modes,CPL and SI cancellation ratio,can have impact on capacity performance,and that CPL is one decisive factor. Our results can provide theoretical supports for development and deployment of future wireless communication systems on high speed railways.

Adaptive Antenna-Activation Based Beamforming for Large-Scale MIMO Communication Systems of High Speed Railway

Large-scale array aided beamforming improves the spectral efficiency(SE) as a benefit of high angular resolution.When dual-beam downlink beamforming is applied to the train moving towards cell edge,the inter-beam ambiguity(IBA) increases as the directional difference between beams becomes smaller.An adaptive antenna activation based beamforming scheme was proposed to mitigate IBA.In the district near the base station(BS),all antenna elements(AEs) were activated to generate two beams.As the distance from the train to the BS increased,only the minimum number of AEs satisfying the resolution criterion would be activated.At the cell edge,one beam was switched off due to intolerable IBA.The proposed scheme can achieve SE gain to the non-adaptive scheme and show more robustness against the direction-of-arrival(DOA) estimation error.

A Survey of Wireless Communication Technologies &Their Performance for High Speed Railways

High Speed Railway (HSR) provides its customers not only safety, security, comfort and on-time commuting, but also a fast transportation alternative to air travel or regular passenger rail services. Providing these benefits would not be possible without the tremendous growth and prevalence of wireless communication technologies. Due to advances in wireless communication systems, both trains and passengers are connected through high speed wireless networks to the Internet, data centers and railroad control centers. Railroad communities, academia, related industries and standards bodies, even the European Space Agency, are involved in advancing developments of HSR for highly connected train communication systems. The goal of these efforts is to provide the capabilities for uninterrupted high-speed fault-tolerant communication networks for all possible geographic, structural and weather conditions. This survey provides an overview of the current state-of-the-art and future trends for wireless technologies aiming to realize the concept of HSR communication services. Our goal is to highlight the challenges for these technologies, including GSM-R, Wi-Fi, WIMAX, LTE-R, RoF, LCX & Cognitive Radio, the offered solutions, their performance, and other related issues. Currently, providing HSR services is the goal of many countries across the globe. Europe, Japan & Taiwan, China, as well as North & South America have increased their efforts to advance HSR technologies to monitor and control not only the operations but also to deliver extensive broadband solutions to passengers. This survey determined a trend of the industry to transition control plane operations towards narrowband frequencies, i.e. LTE400/700, and to utilize concurrently other technologies for broadband access for passengers such that services of both user and train control systems are supported. With traditional technologies, a tradeoff was required and often favored train control services over passenger amenities. However, with the advances in communication systems, such as LTE-R and cognitive radios, it is becoming possible for system designers to offer rich services to passengers while also providing support for enhanced train control operations such as Positive Train Control.

High speed railway promoting development of low-carbon economy in China

Low-carbon Economy is a kind of economic developing mode which takes low energy consumption,low pollution and low discharge as its foundation. It is another important revolution of the human society after the agriculture civilization and industry civilization. It deals with various fields including low-carbon energy,low-carbon agriculture,low-carbon industry,low-carbon transportation and low-carbon life,etc. Among those,low-carbon transportation is one of the important contents. Since high speed railway uses electricity as driving force,it runs without discharging waste gas,and it is a kind of clean and green transportation with little dust and smoke black. Therefore,the study of the relationship between the high speed railway and low-carbon economy is becoming one of the important frontier problems that confronting the theoretic circle. With demonstration analysis and comparative analysis,this paper discusses the comparative advantages of high speed railway in terms of energy saving and environment protection,treatment of sound pollution,land saving and reduction of external cost(mainly pollution treatment cost) ,etc. compared with the other transportation modes and ordinary railway. Taking Beijing-Tianjin Intercity Railway as an example,the paper further demonstrates the distinctive advantages in respect of energy conservation and emission reduction. Besides,the paper also predicates the low-carbon effects after several high speed railways is put into operation in a few years. It is concluded that the development of high speed railways will meet the need of low-carbon economy and is significant for sustainable and steady development of economy and society.

Resource Allocation in D2D-Aided High-Speed Railway Wireless Communication Systems： A Matching Theory Approach

With the rapid deployment of high speed railway(HSR) worldwide,both safety operation and comfort experience can be desired to evolve into a future era of intelligent transportation system.To eliminate boredom and provide entertainment for passengers,an intranet for internal communications among passengers named as onboard social network system(SNS) is needed.In this paper,the latest progress in HSR network architectures and technology building blocks are discussed to enable the implementation of the SNS.Meanwhile,based on the device-to-device(D2 D) communication technology for proximal information interaction,SNS can be efficiently facilitated.A dynamic resource allocation algorithm is proposed to maximize the total utility of the onboard SNS,which is solved with the matching theory method.Simulation results verify the convergence and efficiency of the proposed algorithm.

Investigation of monitoring system for high-speed railway subgrade frost heave

This paper presents methods for monitoring frost heave, device requirements, testing principals, and data analysis re- quirements, such as manual leveling observation, automatic monitoring （frost heave, frost depth, and moisture）, track dynamic detection, and track status detection. We focused on the requirements of subgrade frost heave monitoring for high speed railways, and the relationship of different monitoring methods during different phases of the railway. The com- prehensive monitoring system of high speed railway subgrade frost heave provided the technical support for dynamic design during construction and safe operation of the rail system.

Social Profitability Threshold of High Speed Railway:A Benefit-Cost Analysis

In this study, the benefit-cost analysis technique for projects evaluation is applied to determine the minimum level of demand that makes a high-speed rail project economically viable in Spain. To get this goal, it is nec- essary to take into account not only the costs and benefits of the high speed railway but also the analysis of the costs and benefits linked to other alternative transport modes, such as plane, private car or bus. The re- sults show that the high-speed rail studied is socially profitable from a traffic volume of 6.5 million passen- gers and for a social discount rate of 4%. Given the benefits associated with network effects, which magni- tude grows parallel to the extension of the high-speed network, this threshold could be significantly reduced in subsequent projects.

High-Speed Railways: Present Situation and Future Prospects

Departing from the present situation, this paper attempts to highlight future prospects of high-speed railways. A panorama of high-speed lines worldwide is first given and the limits of a further increase of rail speeds are surveyed. It is explained that rail high speeds are feasible only for large population concentrations. The impact of high speeds on the reduction of travel times is studied. It is established a causal relationship between rail share and reduced travel times. Diversities concerning technical characteristics from one system to another are emphasized together with differences in construction costs from one case to another.

Study on the shock absorbing technique of high speed railway bridges

Based on the idea of "bearing function separation", a structural member called shock absorber that makes use of its plastic deformation is presented for reducing the seismic response of the bridge. The design criterion for matching material stress, strain and earthquake fortification aim, is also given. The analysis results show that the high speed railway box girder with the absorber in this paper has great reduction effect in seismic response of the bridge piers.

Design Innovation and Practice of“One Stationwith One Landscape”for High Speed Railway Stations

Since the founding of New China,railway station design has experienced a long development and evolution process,and has now developed to the fourth generation,which is called the New Era Railway Station.Guided by the new concept of building up a“well-connected fully-integrated,envionmeni-friendly passenger-oriented,economic-efficient,culturally-rich,intelligent and convenient”station,the station building becomes more personalized and specialized displaying distinctive effects,and the design connotation of“one station with one landscape”has also been widened and deepened From the simple differentiated design of facade image,the design is gradually becoming station-specific and customized with station-city integrated development and passengers'boarding and alighting feelings as the core.The purpose is to make the station truly become a prominent card and landmark building that facilitates city development.

Study on the Application of Industrial Style Design in Railway Station Buildings along the Zhengzhou-Wanzhou High Speed Railway

With the improvement of economy and living quality,station buildings of high speed railway are no longer just a space to filfill the transport finction.As a business card of cities,station buildings of high speed railway prefer unique interior design,so the industrial style design featuring simplicity and variety gradually becomes a design trend.Taking the interior design of Changgebei Railway Station and Fangcheng Railway Station as an example,the paper analyzes the application of the industrial style design to high speed railway station buildings in three aspects:project overview,interior design and key issues of construction,and then reflects on and sums up the advantages and disadvantages of the design and construction.The two station buildings,among a very small quantity of station buildings nationwide where the industrial style design is adopted,provide experience and lessons while exploring a new direction for fiuture interior design of station buildings of high speed railway.