Strength performance of mortise and loose-tenon furniture joints under uniaxial bending moment

We determined the effects of adhesive type and loose tenon dimensions （length and thickness） on bending strength of T-shaped mor- tise and loose-tenon joints. Polyvinyl acetate （PVAc） and two-component polyurethane （PU） adhesives were used to construct joint specimens. The bending moment capacity of joints increased significantly with increased length and thickness of the loose tenon. Bending moment capacity of joints constructed with PU adhesive was approximately 13% higher than for joints constructed with PVAc adhesive. We developed a predictive equation as a function of adhesive type and loose tenon dimensions to estimate the strength of the joints constructed of oriental beech （Fagus orientalis L.） under uniaxial bending load.

Finite element analysis of stress and strain distributions in mortise and loose tenon furniture joints

We studied the effect of loose tenon dimensions on stress and strain distributions in T-shaped mortise and loose tenon （M＆amp;LT） furni-ture joints under uniaxial bending loads, and determined the effects of loose tenon length （30, 45, 60, and 90 mm） and loose tenon thickness （6 and 8 mm） on bending moment capacity of M＆amp;LT joints constructed with polyvinyl acetate （PVAc） adhesive. Stress and strain distributions in joint elements were then estimated for each joint using ANSYS finite element （FE） software. The bending moment capacity of joints increased significantly with thickness and length of the tenon. Based on the FE analysis results, under uniaxial bending, the highest shear stress values were obtained in the middle parts of the tenon, while the highest shear elastic strain values were estimated in glue lines between the tenon sur-faces and walls of the mortise. Shear stress and shear elastic strain values in joint elements generally increased with tenon dimensions and corre-sponding bending moment capacities. There was consistency between predicted maximum shear stress values and failure modes of the joints.

Experimental Study on Flexural Behaviour of Circular Concrete-Filled FRP-PVC Tubular Members

An experimental investigation was conducted on the flexural behavior of FRP-PVC confined concrete circular tubular members.A total of six specimens were prepared and tested under flexural loading.The main parameters varied in the tests were the layer of FRP and the strengthening approach of BFRP and CFRP.The failure modes,ultimate bending capacity and stress-strain relation curves were investigated in details.Furthermore,the relation model of moment(M)-curvature(φ)was studied,and on the basis of M-φ relation model,a simplified formula was presented to compute the ultimate bending moment capacity.The results show that the external confinement of concrete specimens by FRP-PVC tubes results in enhancing the ultimate bending strength and ultimate deformation,and the ultimate bending capacity increased with the FRP layers.Simultaneously,the reinforcement effect in CFRP is better than that in BFRP.The ultimate bending moment capacity values predicted by the presented formula agree well with the experimental results,which imply that the presented formula is applicable and efficient for prediction of the ultimate bending moment capacity as well.