Granular behaviour under bi-directional shear with constant vertical stress and constant volume

This paper aims to investigate the role of bi-directional shear in the mechanical behaviour of granular materials and macro-micro relations by conducting experiments and discrete element method(DEM)modelling.The bi-directional shear consists of a static shear consolidation and subsequent shear under constant vertical stress and constant volume conditions.A side wall node loading method is used to exert bi-directional shear of various angles.The results show that bi-directional shear can significantly influence the mechanical behaviour of granular materials.However,the relationship between bidirectional shear and mechanical responses relies on loading conditions,i.e.constant vertical stress or constant volume conditions.The stress states induced by static shear consolidation are affected by loading angles,which are enlarged by subsequent shear,consistent with the relationship between bidirectional shear and principal stresses.It provides evidence for the dissipation of stresses accompanying static liquefaction of granular materials.The presence of bi-directional principal stress rotation(PSR)is demonstrated,which evidences why the bi-directional shear of loading angles with components in two directions results in faster dissipations of stresses with static liquefaction.Contant volume shearing leads to cross-anisotropic stress and fabric at micro-contacts,but constant vertical stress shearing leads to complete anisotropic stress and fabric at micro-contacts.It explains the differentiating relationship between stress-strain responses and fabric anisotropy under these two conditions.Micromechanical signatures such as the slip state of micro-contacts and coordination number are also examined,providing further insights into understanding granular behaviour under bi-directional shear.

Application of CFD and FEA Coupling to Predict Structural Dynamic Responses of A Trimaran in Uni-and Bi-Directional Waves

To predict the wave loads of a flexible trimaran in different wave fields,a one-way interaction numerical simulation method is proposed by integrating the fluid solver(Star-CCM+)and structural solver(Abaqus).Differing from the existing coupled CFD-FEA method for monohull ships in head waves,the presented method equates the mass and stiffness of the whole ship to the hull shell so that any transverse and longitudinal section stress of the hull in oblique waves can be obtained.Firstly,verification study and sensitivity analysis are carried out by comparing the trimaran motions using different mesh sizes and time step schemes.Discussion on the wave elevation of uni-and bi-directional waves is also carried out.Then a comprehensive analysis on the structural responses of the trimaran in different uni-directional regular wave and bi-directional cross sea conditions is carried out,respectively.Finally,the differences in structural response characteristics of trimaran in different wave fields are studied.The results show that the present method can reduce the computational burden of the two-way fluid-structure interaction simulations.

A chaotic hierarchical encryption/watermark embedding scheme for multi-medical images based on row-column confusion and closed-loop bi-directional diffusion

Security during remote transmission has been an important concern for researchers in recent years.In this paper,a hierarchical encryption multi-image encryption scheme for people with different security levels is designed,and a multiimage encryption(MIE)algorithm with row and column confusion and closed-loop bi-directional diffusion is adopted in the paper.While ensuring secure communication of medical image information,people with different security levels have different levels of decryption keys,and differentiated visual effects can be obtained by using the strong sensitivity of chaotic keys.The highest security level can obtain decrypted images without watermarks,and at the same time,patient information and copyright attribution can be verified by obtaining watermark images.The experimental results show that the scheme is sufficiently secure as an MIE scheme with visualized differences and the encryption and decryption efficiency is significantly improved compared to other works.

Text Sentiment Analysis Based on Multi-Layer Bi-Directional LSTM with a Trapezoidal Structure

Sentiment analysis,commonly called opinion mining or emotion artificial intelligence(AI),employs biometrics,computational linguistics,nat-ural language processing,and text analysis to systematically identify,extract,measure,and investigate affective states and subjective data.Sentiment analy-sis algorithms include emotion lexicon,traditional machine learning,and deep learning.In the text sentiment analysis algorithm based on a neural network,multi-layer Bi-directional long short-term memory(LSTM)is widely used,but the parameter amount of this model is too huge.Hence,this paper proposes a Bi-directional LSTM with a trapezoidal structure model.The design of the trapezoidal structure is derived from classic neural networks,such as LeNet-5 and AlexNet.These classic models have trapezoidal-like structures,and these structures have achieved success in the field of deep learning.There are two benefits to using the Bi-directional LSTM with a trapezoidal structure.One is that compared with the single-layer configuration,using the of the multi-layer structure can better extract the high-dimensional features of the text.Another is that using the trapezoidal structure can reduce the model’s parameters.This paper introduces the Bi-directional LSTM with a trapezoidal structure model in detail and uses Stanford sentiment treebank 2(STS-2)for experiments.It can be seen from the experimental results that the trapezoidal structure model and the normal structure model have similar performances.However,the trapezoidal structure model parameters are 35.75%less than the normal structure model.

A Modified Bi-Directional Evolutionary Structural Optimization Procedure with Variable Evolutionary Volume Ratio Applied to Multi-Objective Topology Optimization Problem

Natural frequency and dynamic stiffness under transient loading are two key performances for structural design related to automotive,aviation and construction industries.This article aims to tackle the multi-objective topological optimization problem considering dynamic stiffness and natural frequency using modified version of bi-directional evolutionary structural optimization(BESO).The conventional BESO is provided with constant evolutionary volume ratio(EVR),whereas low EVR greatly retards the optimization process and high EVR improperly removes the efficient elements.To address the issue,the modified BESO with variable EVR is introduced.To compromise the natural frequency and the dynamic stiffness,a weighting scheme of sensitivity numbers is employed to form the Pareto solution space.Several numerical examples demonstrate that the optimal solutions obtained from the modified BESO method have good agreement with those from the classic BESO method.Most importantly,the dynamic removal strategy with the variable EVR sharply springs up the optimization process.Therefore,it is concluded that the modified BESO method with variable EVR can solve structural design problems using multi-objective optimization.

Wave propagation responses of porous bi-directional functionally graded magneto-electro-elastic nanoshells via nonlocal strain gradient theory

This study examines the wave propagation characteristics for a bi-directional functional grading of barium titanate(BaTiO_(3)) and cobalt ferrite(CoFe_(2)O_(4)) porous nanoshells,the porosity distribution of which is simulated by the honeycomb-shaped symmetrical and asymmetrical distribution functions.The nonlocal strain gradient theory(NSGT) and first-order shear deformation theory are used to determine the size effect and shear deformation,respectively.Nonlocal governing equations are derived for the nanoshells by Hamilton's principle.The resulting dimensionless differential equations are solved by means of an analytical solution of the combined exponential function after dimensionless treatment.Finally,extensive parametric surveys are conducted to investigate the influence of diverse parameters,such as dimensionless scale parameters,radiusto-thickness ratios,bi-directional functionally graded(FG) indices,porosity coefficients,and dimensionless electromagnetic potentials on the wave propagation characteristics.Based on the analysis results,the effect of the dimensionless scale parameters on the dispersion relationship is found to be related to the ratio of the scale parameters.The wave propagation characteristics of nanoshells in the presence of a magnetoelectric field depend on the bi-directional FG indices.

Pilot Study of Molecular Mechanism on Vasculogenic Mimicry in Bi-directional Differentiated Malignant Tumors

Objective: To investigate the role of collagen IV and PAS positive substancesecreted by tumor cells in vasculogenic mimicry (VM) and the effects of VM on tumor cells expressingVEGF. Methods: 158 cases of bi-direction differential malignant tumor specimens withparaffin-embedded were enrolled into our study and made tissue microarray which were dual-stainedwith CD31-PAS and stained with collagen IV. The difference of the areas and distribution withpattern surrounded by between CD31 and PAS positive respectively were identified via grid-counting,as well as the difference of VEGF expression with VE absent and present. Results: The basementmembrane of VM was both PAS and collagen IV positive. VEGF expression in the bi-directiondifferential malignant tumor was higher VM-absent than VM-present and the difference wasstatistically significance in malignant melanoma and alveolar rhabdomyosarcoma (P 【 0.05).Conclusion: PAS positive substance and collagen IV compose the wall of VE and VE could provide theoxygen and nutrition for tumor growth and progression.

Multi-agent system application in accordance with game theory in bi-directional coordination network model

The multi-agent system is the optimal solution to complex intelligent problems. In accordance with the game theory, the concept of loyalty is introduced to analyze the relationship between agents' individual income and global benefits and build the logical architecture of the multi-agent system. Besides, to verify the feasibility of the method, the cyclic neural network is optimized, the bi-directional coordination network is built as the training network for deep learning, and specific training scenes are simulated as the training background. After a certain number of training iterations, the model can learn simple strategies autonomously. Also,as the training time increases, the complexity of learning strategies rises gradually. Strategies such as obstacle avoidance, firepower distribution and collaborative cover are adopted to demonstrate the achievability of the model. The model is verified to be realizable by the examples of obstacle avoidance, fire distribution and cooperative cover. Under the same resource background, the model exhibits better convergence than other deep learning training networks, and it is not easy to fall into the local endless loop.Furthermore, the ability of the learning strategy is stronger than that of the training model based on rules, which is of great practical values.

Construction and analysis of a plant transformation binary vector pBDGG harboring a bi-directional promoter fusing dual visible reporter genes

The constitutive promoter of cauliflower mosaic virus 35S （CaMV 35S） is a polar unidirectional promoter and is widely used in plant genetic engineering. In the present study, the unidirectional CaMV 35S promoter has been modified to a bi-directional promoter by fusing its minimal promoter element to the 5＇ end of CaMV 35S promoter in the opposite orientation. To qualitatively and quantitatively estimate its bi-directional transcriptional function and activity, two visible reporter genes, gusA （13-glucuronidase, GUS） and gfp （green fluorescent protein, GFP）, were fused to the two ends of the promoter in bi-orientations ending with NOS terminator sequences, respectively. Stable expression of gusA and gfp genes in transgenic tobacco （Nicotiana tabacum L.） was visulized by histochemically staining for GUS and fluorescence microscopic observation under UV for GFP in transgenic plants. The expression of two reporter genes showed that the constructed bi-directional promoter did have the bi-directional transcriptional function in both expected orientations. The quantitative estimation of GUS and GFP were determined on a HITACHI F1000 Fluorescence Spectrophotometer with various wavelengths of excitation and emission. The GUS activity varied from g to 250 pmol 4-MU/min/mg protein and the GFP content varied from 0.9 to 1.8 μg/ mg protein in various lines of transgenic tobacco plants. Higher GUS activity generally coupled with lower GFP content, and vice versa.

Experimental Investigation of Local Scour Around A New Pile-Group Foundation for Offshore Wind Turbines in Bi-Directional Current

The local scour around a new pile-group foundation of offshore wind turbine subjected to a bi-directional current was physically modeled with a bi-directional flow flume. In a series of experiments, the flow velocity and topography of the seabed were measured based on a system composed of plane positioning equipment and an ADV.Experimental results indicate that the development of the scour hole was fast at the beginning, but then the scour rate decreased until reaching equilibrium. Erosion would occur around each pile of the foundation. In most cases, the scour pits were connected in pairs and the outside widths of the scour holes were larger than the inner widths. The maximum scour depth occurred at the side pile of the foundation for each test. In addition, a preliminary investigation shows that the larger the flow velocity, the larger the scour hole dimensions but the shorter equilibrium time. The field maximum scour depth around the foundation was obtained based on the physical experiments with the geometric length scales of 1:27.0, 1:42.5 and 1:68.0, and it agrees with the scour depth estimated by the HEC-18 equation.

Study on Application of Bi-directional Combination Technology Integrating Residue Hydrotreating with Catalytic Cracking RICP

After analysing the disadvantages of the traditional residue hydrotreating-catalytic cracking combination process, RIPP has proposed a bi-directional combination technology integrating residue hydrotreating with catalytic cracking called RICP which does not further recycles the FCC heavy cycle oil (HCO) inside the FCC unit and delivers HCO to the residue hydrotreating unit as a diluting oil for the residue that is concurrently subjected to hydrotreating prior to being used as the FCC feed oil. The RICP technology can stimulate residue hydrotreating reactions through utilization of HCO along with an in- creased yield of FCC light distillate, resulting in enhanced petroleum utilization and economic benefits of the refinery.

Quantitative measurements of one-dimensional OH absolute concentration profiles in a methane/air flat flame by bi-directional laser-induced fluorescence

The one-dimensional （1D） spatial distributions of OH absolute concentration in methane/air laminar premixed flat flame under different equivalence ratios at atmospheric pressure are investigated by using bi-directional laser-induced flu- orescence （LIF） detection scheme combined with the direct absorption spectroscopy. The effective peak absorption cross section and the average temperature at a height of 2 mm above the burner are obtained by exciting absorption on the Q1（8） rotational line in the A2∑＋ （Dt = 0） ←- X2∏ （v = 0） at 309.240 nm. The measured values are 1.86×10-15 cm2 and 1719 K, respectively. Spatial filtering and frequency filtering methods of reducing noise are used to deal with the experi- mental data, and the smoothing effects are also compared using the two methods. The spatial distribution regularities of OH concentration are obtained with the equivalence ratios ranging from 0.8 to 1.3. The spatial resolution of the measured result is 84μm. Finally, a comparison is made between the experimental result of this paper and other relevant study results.

A High-Speed Bi-Directional Visible Light Communication System Based on RGB-LED

In this paper, we propose and experimentally demonstrate a bi-directional indoor communication system based on visible light RGB-LED. Spectrally efficient modulation formats （QAM-OFDM）, advanced digital signal processing, pre- and post- equalization are adopted to compensate the severe frequency response of indoor channel. In this system, we utilize red-green-blue Light emitting diodes （LEDs）, of which each color can be used to carry different signals. For downlink, the low frequencies of each color are used while for uplink, the high frequencies are used. The overall data rate of downlink and uplink are 1.15-Gb/s and 300-Mb/s. The bit error ratios （BERs） for all channels after 0.7 m indoor delivery are below pre-forward- error-correction （pre-FEC） threshold of 3.8×10-3. To the best of our knowledge, this is the highest data rate in bi-directional visible light communication system.

Application of bi-directional static loading test to deep foundations

Bi-directional static loading test adopting load cells is widely used around the world at present, with increase in diameter and length of deep foundations. In this paper, a new simple conversion method to predict the equivalent pile head load-settlement curve considering elastic shortening of deep foundation was put forward according to the load transfer mechanism. The proposed conversion method was applied to root caisson foundation in a bridge and to large diameter pipe piles in a sea wind power plant. Some new load cells, test procedure, and construction technology were adopted based on the applications to different deep foundations, which could enlarge the application scopes of bi-directional loading test. A new type of bi-directional loading test for pipe pile was conducted, in which the load cell was installed and loaded after the pipe pile with special connector has been set up. Unlike the conventional bi-directional loading test, the load cell can be reused and shows an evident economic benefit.

Bending and free vibrational analysis of bi-directional functionally graded beams with circular cross-section

The bending and free vibrational behaviors of functionally graded(FG)cylindrical beams with radially and axially varying material inhomogeneities are investigated.Based on a high-order cylindrical beam model,where the shear deformation and rotary inertia are both considered,the two coupled governing differential motion equations for the deflection and rotation are established.The analytical bending solutions for various boundary conditions are derived.In the vibrational analysis of FG cylindrical beams,the two governing equations are firstly changed to a single equation by means of an auxiliary function,and then the vibration mode is expanded into shifted Chebyshev polynomials.Numerical examples are given to investigate the effects of the material gradient indices on the deflections,the stress distributions,and the eigenfrequencies of the cylindrical beams,respectively.By comparing the obtained numerical results with those obtained by the three-dimensional(3D)elasticity theory and the Timoshenko beam theory,the effectiveness of the present approach is verified.

Stress Relaxation and Sensitivity Weight for Bi-Directional Evolutionary Structural Optimization to Improve the Computational Efficiency and Stabilization on Stress-Based Topology Optimization

Stress-based topology optimization is one of the most concerns of structural optimization and receives much attention in a wide range of engineering designs.To solve the inherent issues of stress-based topology optimization,many schemes are added to the conventional bi-directional evolutionary structural optimization(BESO)method in the previous studies.However,these schemes degrade the generality of BESO and increase the computational cost.This study proposes an improved topology optimization method for the continuum structures considering stress minimization in the framework of the conventional BESO method.A global stress measure constructed by p-norm function is treated as the objective function.To stabilize the optimization process,both qp-relaxation and sensitivity weight scheme are introduced.Design variables are updated by the conventional BESO method.Several 2D and 3D examples are used to demonstrate the validity of the proposed method.The results show that the optimization process can be stabilized by qp-relaxation.The value of q and p are crucial to reasonable solutions.The proposed sensitivity weight scheme further stabilizes the optimization process and evenly distributes the stress field.The computational efficiency of the proposed method is higher than the previous methods because it keeps the generality of BESO and does not need additional schemes.

A new device for stress monitoring in continuously welded rails using bi-directional strain method

The technology of continuously welded rails （CWRs） is important in modern railway track structures. To measure rail stress, resistance strain gauges are preferred due to their good stability, sensitivity, and esistance to external interference. Based on the bi-directional strain method, we present a new method for measuring longitudinal rail stress using resistance strain gauges and develop a monitoring device for rail stress to realize long-term and multi-point measurement. Also relevant experimental verification and analysis are conducted. Results indicate that under various constraints the rail stress–strain values can be calculated just with the measured total longitudinal strain and total vertical strain. Considering the measurement error caused by sectional feature of sensors, we put forward a correction equation applicable to different stress conditions. Although the temperature values of the four full-bridge stress gauges can offset each other, the measurement error caused by rail flexural strain can also be eliminated to a certain extent at the same time, the nonuniform distribution of rail cross section temperature and unbalanced flexural strain still affect the measurement error. The experimental results also show that the developed rail-stress-monitoring sensor is suitable for measuring rail stress with reliable working performance.

Overall Bi-directional Panoramic Exploration of the Solar System

An overall bi-directional panoramic solar system exploration activity,not just looking at the solar system at a macro level and helping to build a simulation model for the solar system,but the probe will also be able to explore the Milky Way and the vast universe from a much wider perspective.By observing the characteristics of the solar system,solar wind,ionization envelope and other parameters from a bi-directional panorama on both sides of the solar ecliptic plane,it will assist the scientific community and human kind to understand the solar system in a more extensive,deeper and systematic way than before.The exploration can be done in two steps.The first step is to launch a solar polar probe.Secondly to launch a bi-directional probe orbiting the galaxy in sync with the sun.

Properties and Stability of Max-Product Fuzzy Bi-Directional Associative Memory

In this paper, a fuzzy operator of max-product is defined at first, and the fuzzy bi-directional associative memory (FBAM) based on the fuzzy operator of max-product is given. Then the properties and the Lyapunov stability of equilibriums of the networks are studied.

Design and Implementation of A Bi-Directional Proxy Server

In this paper, a mechanism of bi-directional proxy is proposed, which supports authentication based on identity, and endue different users with different network access permissions. This technology is purposed with a new idea towards the implementation of network security, which has a promising future in applications. Key words network security - firewall - bi-directional proxy server - identity authentication CLC number TP 368.5 Foundation item: Supported by the National Natural Science Foundation of China (60173051), The National Research Foundation for the Doctoral Program of Higher Education of China (20030145029). Teaching and Research Award Program for Outstanding Young Teachers in Higher Education Institution of the Ministry of Education; National 863 High-tech Program (2003AA414210)Biography: GAO Fu-xiang (1961-), male, Professor, Master, research direction: computer network security.