We develop a tractable theoretical model to investigate the thermoelectric （TE） transport properties of surface states in topological insulator thin films （TITFs） of Bi2Sea at room temperature. The hybridization b...We develop a tractable theoretical model to investigate the thermoelectric （TE） transport properties of surface states in topological insulator thin films （TITFs） of Bi2Sea at room temperature. The hybridization between top and bottom surface states in the TITF plays a significant role. With the increasing hybridization-induced surface gap, the electrical conductivity and electron thermal conductivity decrease while the Seebeck coefficient increases. This is due to the metal-semiconductor transition induced by the surface-state hybridization. Based on these TE transport coefficients, the TE figure-of-merit ZT is evaluated. It is shown that ZT can be greatly improved by the surface-state hybridization. Our theoretical results are pertinent to the exploration of the TE transport properties of surface states in TITFs and to the potential application of Bi2Sea-based TITFs as high-performance TE materials and devices.展开更多
We demonstrate a dual-wavelength passively Q-switched Nd^（3＋）-doped glass fiber laser using a few-layer topological insulator Bi2Se3 as a saturable absorber（SA） for the first time, to the best of our knowledge. T...We demonstrate a dual-wavelength passively Q-switched Nd^（3＋）-doped glass fiber laser using a few-layer topological insulator Bi2Se3 as a saturable absorber（SA） for the first time, to the best of our knowledge. The laser resonator is a simple and compact linear cavity using two fiber end-facet mirrors. The SA is fabricated by Bi2Se3/polyvinyl alcohol composite film. By inserting the SA into the laser cavity, a stable Q-switching operation is achieved with the shortest pulse width and maximum pulse repetition rate of 601 ns and 205.2 kHz,respectively. The maximum average output power and maximum pulse energy obtained are about 6.6 mW and 38.8 nJ, respectively.展开更多
Thermoelectric materials,enabling the directing conversion between heat and electricity,are one of the promising candidates for overcoming environmental pollution and the upcoming energy shortage caused by the over-co...Thermoelectric materials,enabling the directing conversion between heat and electricity,are one of the promising candidates for overcoming environmental pollution and the upcoming energy shortage caused by the over-consumption of fossil fuels.Bi2Te3-based alloys are the classical thermoelectric materials working near room temperature.Due to the intensive theoretical investigations and experimental demonstrations,significant progress has been achieved to enhance the thermoelectric performance of Bi2Te3-based thermoelectric materials.In this review,we first explored the fundamentals of thermoelectric effect and derived the equations for thermoelectric properties.On this basis,we studied the effect of material parameters on thermoelectric properties.Then,we analyzed the features of Bi2Te3-based thermoelectric materials,including the lattice defects,anisotropic behavior and the strong bipolar conduction at relatively high temperature.Then we accordingly summarized the strategies for enhancing the thermoelectric performance,including point defect engineering,texture alignment,and band gap enlargement.Moreover,we highlighted the progress in decreasing thermal conductivity using nanostructures fabricated by solution grown method,ball milling,and melt spinning.Lastly,we employed modeling analysis to uncover the principles of anisotropy behavior and the achieved enhancement in Bi2Te3,which will enlighten the enhancement of thermoelectric performance in broader materials展开更多
Bi_2Te_3 thin films and GeTe/B_2Te_3 superlattices of different thicknesses are prepared on the silicon dioxide substrates by magnetron sputtering technique and thermally annealed at 573 K for 30 min. Thermoelectric...Bi_2Te_3 thin films and GeTe/B_2Te_3 superlattices of different thicknesses are prepared on the silicon dioxide substrates by magnetron sputtering technique and thermally annealed at 573 K for 30 min. Thermoelectric（TE）measurements indicate that optimal thickness and thickness ratio improve the TE performance of Bi_2Te_3 thin films and GeTe/B_2Te_3 superlattices, respectively. High TE performances with figure-of-merit（ZT） values as high as 1.32 and 1.56 are achieved at 443 K for 30 nm and 50 nm Bi_2Te_3 thin films, respectively. These ZT values are higher than those of p-type Bi_2Te_3 alloys as reported. Relatively high ZT of the GeTe/B_2Te_3 superlattices at 300-380 K were 0.62-0.76. The achieved high ZT value may be attributed to the unique nano-and microstructures of the films,which increase phonon scattering and reduce thermal conductivity. The results indicate that Bi_2Te_3-based thin films can serve as high-performance materials for applications in TE devices.展开更多
文章利用分子束外延方法在蓝宝石衬底上制备Bi_2Se_3拓扑绝缘体薄膜,研究衬底温度对薄膜生长质量的影响。首先对370、380、390、400℃衬底温度下生长的Bi_2Se_3薄膜样品,利用反射高能电子衍射仪(reflection high-energy electron diffra...文章利用分子束外延方法在蓝宝石衬底上制备Bi_2Se_3拓扑绝缘体薄膜,研究衬底温度对薄膜生长质量的影响。首先对370、380、390、400℃衬底温度下生长的Bi_2Se_3薄膜样品,利用反射高能电子衍射仪(reflection high-energy electron diffraction,RHEED)、原子力显微镜(atomic force microscope,AFM)进行表面形貌的表征;利用X射线衍射仪(X-ray diffraction,XRD)和X射线能谱仪(energy dispersive X-ray spectroscopy,EDS)对样品的晶相和化学组分进行分析筛样。结果表明,衬底温度为390℃时制备的Bi_2Se_3薄膜表面平整、成分接近理想配比、结晶质量较好。最后利用综合物性测量系统测量了最佳衬底温度制备的样品的电学性质,表明样品为n型拓扑绝缘体薄膜。展开更多
基金Supported by the National Natural Science Foundation of China under Grant No 11304316the Ministry of Science and Technology of China under Grant No 2011YQ130018the Department of Science and Technology of Yunnan Province,and the Chinese Academy of Sciences
文摘We develop a tractable theoretical model to investigate the thermoelectric （TE） transport properties of surface states in topological insulator thin films （TITFs） of Bi2Sea at room temperature. The hybridization between top and bottom surface states in the TITF plays a significant role. With the increasing hybridization-induced surface gap, the electrical conductivity and electron thermal conductivity decrease while the Seebeck coefficient increases. This is due to the metal-semiconductor transition induced by the surface-state hybridization. Based on these TE transport coefficients, the TE figure-of-merit ZT is evaluated. It is shown that ZT can be greatly improved by the surface-state hybridization. Our theoretical results are pertinent to the exploration of the TE transport properties of surface states in TITFs and to the potential application of Bi2Sea-based TITFs as high-performance TE materials and devices.
基金supported by the National Natural Science Foundation of China(NSFC)(No.61275050)the Project funded by the Department of Education of Guizhou Province(No.[2016]140)+3 种基金the Science and Technology Foundation of Guizhou Province(Nos.[2014]2124,[2010]2146,and[2009]06)the Science and Technology Plan Projects of Guizhou Province(No.SY2013[3055])the Science-Technology Union Foundation of Guizhou Province(No.[2014]7045)the International Science-Technology cooperation project of Guizhou Province of China(No.[2013]7019)
文摘We demonstrate a dual-wavelength passively Q-switched Nd^（3＋）-doped glass fiber laser using a few-layer topological insulator Bi2Se3 as a saturable absorber（SA） for the first time, to the best of our knowledge. The laser resonator is a simple and compact linear cavity using two fiber end-facet mirrors. The SA is fabricated by Bi2Se3/polyvinyl alcohol composite film. By inserting the SA into the laser cavity, a stable Q-switching operation is achieved with the shortest pulse width and maximum pulse repetition rate of 601 ns and 205.2 kHz,respectively. The maximum average output power and maximum pulse energy obtained are about 6.6 mW and 38.8 nJ, respectively.
基金Project supported by the Australian Research CouncilZhi-Gang Chen thanks the USQ start-up grantstrategic research grant
文摘Thermoelectric materials,enabling the directing conversion between heat and electricity,are one of the promising candidates for overcoming environmental pollution and the upcoming energy shortage caused by the over-consumption of fossil fuels.Bi2Te3-based alloys are the classical thermoelectric materials working near room temperature.Due to the intensive theoretical investigations and experimental demonstrations,significant progress has been achieved to enhance the thermoelectric performance of Bi2Te3-based thermoelectric materials.In this review,we first explored the fundamentals of thermoelectric effect and derived the equations for thermoelectric properties.On this basis,we studied the effect of material parameters on thermoelectric properties.Then,we analyzed the features of Bi2Te3-based thermoelectric materials,including the lattice defects,anisotropic behavior and the strong bipolar conduction at relatively high temperature.Then we accordingly summarized the strategies for enhancing the thermoelectric performance,including point defect engineering,texture alignment,and band gap enlargement.Moreover,we highlighted the progress in decreasing thermal conductivity using nanostructures fabricated by solution grown method,ball milling,and melt spinning.Lastly,we employed modeling analysis to uncover the principles of anisotropy behavior and the achieved enhancement in Bi2Te3,which will enlighten the enhancement of thermoelectric performance in broader materials
文摘Bi_2Te_3 thin films and GeTe/B_2Te_3 superlattices of different thicknesses are prepared on the silicon dioxide substrates by magnetron sputtering technique and thermally annealed at 573 K for 30 min. Thermoelectric（TE）measurements indicate that optimal thickness and thickness ratio improve the TE performance of Bi_2Te_3 thin films and GeTe/B_2Te_3 superlattices, respectively. High TE performances with figure-of-merit（ZT） values as high as 1.32 and 1.56 are achieved at 443 K for 30 nm and 50 nm Bi_2Te_3 thin films, respectively. These ZT values are higher than those of p-type Bi_2Te_3 alloys as reported. Relatively high ZT of the GeTe/B_2Te_3 superlattices at 300-380 K were 0.62-0.76. The achieved high ZT value may be attributed to the unique nano-and microstructures of the films,which increase phonon scattering and reduce thermal conductivity. The results indicate that Bi_2Te_3-based thin films can serve as high-performance materials for applications in TE devices.
文摘文章利用分子束外延方法在蓝宝石衬底上制备Bi_2Se_3拓扑绝缘体薄膜,研究衬底温度对薄膜生长质量的影响。首先对370、380、390、400℃衬底温度下生长的Bi_2Se_3薄膜样品,利用反射高能电子衍射仪(reflection high-energy electron diffraction,RHEED)、原子力显微镜(atomic force microscope,AFM)进行表面形貌的表征;利用X射线衍射仪(X-ray diffraction,XRD)和X射线能谱仪(energy dispersive X-ray spectroscopy,EDS)对样品的晶相和化学组分进行分析筛样。结果表明,衬底温度为390℃时制备的Bi_2Se_3薄膜表面平整、成分接近理想配比、结晶质量较好。最后利用综合物性测量系统测量了最佳衬底温度制备的样品的电学性质,表明样品为n型拓扑绝缘体薄膜。
基金Supported by the National Natural Science Foundation of China(11304092,51371079,11305056,11304299,51602099)the Open Foundation of Hubei Collaborative Innovation Center for High-efficiency Utilization of Solar Energy(HBSKFZD2014001,HBSKFM2014006,HBSKFM2014013,HBSKFM2014015)
