Novel TiO2/BiVO4 microfiber heterojunctions were constructed using cotton as biomorphic templates. The as-synthesized samples were characterized by scanning electron microscope, X-ray diffraction, X-ray photoelectron ...Novel TiO2/BiVO4 microfiber heterojunctions were constructed using cotton as biomorphic templates. The as-synthesized samples were characterized by scanning electron microscope, X-ray diffraction, X-ray photoelectron spectroscopy, UV-Vis diffuse reflectance spectra and photocatalytic experiment. The morphology of the as-synthesized TiO2/BiVO4 composites was consisted of a large quantity of microfiber structures with diameter from 2.5 gm to 5 μm, and the surface of samples became more coarse and compact with the increase of weight ratio of TiO2. The TiO2/BiVO4 samples with proper content （10.00wt%） showed the highest pho- tocatalytic degradation activity for methylene blue （MB） degradation among all the samples under visible light, and 88.58%MB could be degraded within 150 min. The enhancement of photocatalytic activity was mainly attributed to the formation of n-n heterojunction at the contact interface of TiO2 and BiVO4, which not only narrowed the band gap of BiVO4 for extending the absorption range of visible light, but also promoted the transfer of charge carriers across interface. A possible photodegradation mechanism of MB in the presence of TiO2/BiVO4 microfibrous photocatalyst was proposed.展开更多
Sr2CeO4 phosphor was synthesized by mechanical milling and reactive sintering in this work. The solid state reaction of SrCO3 and CeO2 (2∶1) started at about 850 ℃ and completed at 1 000 ℃ for about 4 h. Two types ...Sr2CeO4 phosphor was synthesized by mechanical milling and reactive sintering in this work. The solid state reaction of SrCO3 and CeO2 (2∶1) started at about 850 ℃ and completed at 1 000 ℃ for about 4 h. Two types of formation mechanism of Sr2CeO4 were proposed. When the starting powder mixture was fired above 1 000 ℃, the unstable intermediate phase SrCeO3 was developed, which then reacted with SrCO3 to form the final product Sr2CeO4, however, SrCO3 and CeO2 converted directly to Sr2CeO4 at a lower temperature. The XRD results showed the crystal structure of Sr2CeO4 was orthorhombic. The emission spectra displayed a broad band with maximum at about 465 nm. The mechanical milling of starting power mixture and the sintering temperature had no effect on this emission spectra.展开更多
基金supported by the National Natural Science Foundation of China(21407059,61308095)Science Development Project of Jilin Province,China(20130522071JH,20130102004JC,20140101160JC)~~
基金This work was supported by Program Funded by Sha.anxi Department （No.2013JK0690）, the Scientific Research Provincial Education Fundamental Research Funds of Xianyang Normal University （No. 14XSYK011, No.12XSYK025）, Shaanxi Province Natural Science Foundation （No.2015JQ5188）.
文摘Novel TiO2/BiVO4 microfiber heterojunctions were constructed using cotton as biomorphic templates. The as-synthesized samples were characterized by scanning electron microscope, X-ray diffraction, X-ray photoelectron spectroscopy, UV-Vis diffuse reflectance spectra and photocatalytic experiment. The morphology of the as-synthesized TiO2/BiVO4 composites was consisted of a large quantity of microfiber structures with diameter from 2.5 gm to 5 μm, and the surface of samples became more coarse and compact with the increase of weight ratio of TiO2. The TiO2/BiVO4 samples with proper content （10.00wt%） showed the highest pho- tocatalytic degradation activity for methylene blue （MB） degradation among all the samples under visible light, and 88.58%MB could be degraded within 150 min. The enhancement of photocatalytic activity was mainly attributed to the formation of n-n heterojunction at the contact interface of TiO2 and BiVO4, which not only narrowed the band gap of BiVO4 for extending the absorption range of visible light, but also promoted the transfer of charge carriers across interface. A possible photodegradation mechanism of MB in the presence of TiO2/BiVO4 microfibrous photocatalyst was proposed.
文摘Sr2CeO4 phosphor was synthesized by mechanical milling and reactive sintering in this work. The solid state reaction of SrCO3 and CeO2 (2∶1) started at about 850 ℃ and completed at 1 000 ℃ for about 4 h. Two types of formation mechanism of Sr2CeO4 were proposed. When the starting powder mixture was fired above 1 000 ℃, the unstable intermediate phase SrCeO3 was developed, which then reacted with SrCO3 to form the final product Sr2CeO4, however, SrCO3 and CeO2 converted directly to Sr2CeO4 at a lower temperature. The XRD results showed the crystal structure of Sr2CeO4 was orthorhombic. The emission spectra displayed a broad band with maximum at about 465 nm. The mechanical milling of starting power mixture and the sintering temperature had no effect on this emission spectra.
