Current-voltage characteristics of lead zirconate titanate/nickel bilayered hollow cylindrical magnetoelectric composites

Current--voltage measurements obtained from lead zirconate titanate/nickel bilayered hollow cylindrical magnetoelectric composite showed that a sinusoidal current applied to the copper coil wrapped around the hollow cylinder circumference induces voltage across the lead zirconate titanate layer thickness. The current--voltage coefficient and the maximum induced voltage in lead zirconate titanate at 1~kHz and resonance （60.1~kHz） frequencies increased linearly with the number of the coil turns and the applied current. The resonance frequency corresponds to the electromechanical resonance frequency. The current--voltage coefficient can be significantly improved by optimizing the magnetoelectric structure geometry and/or increasing the number of coil turns. Hollow cylindrical lead zirconate titanate/nickel structures can be potentially used as current sensors.

Bilayered Glass-Ceramics as Sealants for SOFCs

Glass-ceramics are often used as sealants in solid oxide fuel cells (SOFC). But interfacing components, such as ferritic stainless steel and YSZ electrolyte, may vary in their requirements regarding sealing properties, especially in terms of thermal expansion. A bilayered glass-ceramic system was developed to overcome the mismatch in coefficients of thermal expansion (CTE) between ferritic steel and YSZ. Therefore, two different glass-ceramics with slightly different CTEs were developed, one with good bonding characteristics to the ferritic steel and the other to the YSZ electrolyte. Steel and electrolyte components were coated with a layer of their corresponding glass sealant paste and heated up to form a sandwich sample. During the heat treatment of the sealing process, the glasses are crystallized into glass-ceramics. The resulting interface between the two glass-ceramics is of special interest. Cross-sections of the sandwich samples were cut, polished and investigated using SEM. The glass-ceramics show continuous, gap-free layers and excellent bonding to both steel and YSZ. Energy release rates are measured for single and bilayered glass sealants by mechanical testing. The designed bilayered glass-ceramics fulfill the special requirements of ferritic steel and YSZ. They show excellent potential to become a new outstanding sealant for SOFCs.

First-principles modeling hydrogenation of bilayered boron nitride

We have investigated the structural and electronic characteristics of hydrogenated boron-nitride bilayer（H–BNBN–H） using first-principles calculations. The results show that hydrogenation can significantly reduce the energy gap of the BN–BN into the visible-light region. Interestingly, the electric field induced by the interface dipoles helps to promote the formation of well-separated electron–hole pairs, as demonstrated by the charge distribution of the VBM and CBM.Moreover, the applied bias voltage on the vertical direction of the bilayer could modulate the band gap, resulting in transition from semiconductor to metal. We conclude that H–BNBN–H could improve the solar energy conversion efficiency, which may provide a new way for tuning the electronic devices to meet different environments and demands.

Effect of porosities of bilayered porous scaffolds on spontaneous osteochondral repair in cartilage tissue engineering

Poly(lactide-co-glycolide)-bilayered scaffolds with the same porosity or different ones on the two layers were fabricated,and the porosity effect on in vivo repairing of the osteochondral defect was examined in a comparative way for the first time.The constructs of scaffolds and bone marrow-derived mesenchymal stem cells were implanted into pre-created osteochondral defects in the femoral condyle of New Zealand white rabbits.After 12 weeks,all experimental groups exhibited good cartilage repairing according to macroscopic appearance,cross-section view,haematoxylin and eosin staining,toluidine blue staining,immunohistochemical staining and real-time polymerase chain reaction of characteristic genes.The group of 92%porosity in the cartilage layer and 77%porosity in the bone layer resulted in the best efficacy,which was understood by more biomechanical mimicking of the natural cartilage and subchondral bone.This study illustrates unambiguously that cartilage tissue engineering allows for a wide range of scaffold porosity,yet some porosity group is optimal.It is also revealed that the biomechanical matching with the natural composite tissue should be taken into consideration in the design of practical biomaterials,which is especially important for porosities of a multi-compartment scaffold concerning connected tissues.

Bilayered HA/CS/PEGDA hydrogel with good biocompatibility and self-healing property for potential application in osteochondral defect repair

The fabrication of osteochondral tissue engineering scaffolds comprised of different layers is a big challenge. Herein, bilayers comprised of double network hydrogels with or without nano hydroxyapatite （HAp） were developed by exploiting the radical reaction of poly（ethylene glycol） diacrylate （PEGDA） and the Schiff-base reaction of N-carboxyethyl chitosan （CEC） and oxidized hyaluronic acid sodium （OHA） for osteochondral tissue engineering. The bilayered osteochondral scaffold was successfully fabricated based on the superior self-healing property of both hydrogels and evaluated by scanning electron microscopy, macroscopic observation and mechanical measurements. In addition, the hydrogels exhibited good biocompatibility as demonstrated by the in vitro cytotoxicity and in vivo implantation tests. The results indicated that the bilayered hydrogel had great potential for application in osteochondral tissue engineering.

Cholesterol-induced deformation of the gramicidin A channel inhibiting potassium ion binding and transport

Gramicidin A(gA)is a kind of antibiotic peptide produced by bacillus brevis and it can dimerize across lipid bilayers to form a monovalent cation channel.In this work,we investigate the impact of cholesterol in the lipid bilayer on the binding of potassium ions with the gA channel and the transport of the ions across the channel.The results indicate that cholesterol can significantly influence the conformational stability of the gA channel and cause the channel deformation which inhibits the potassium ion binding with the channel and transport across the channel.The work provides some molecular insights into understanding of influence of lipids on the activity of gA channel in both model membranes and plasma membranes of intact cells.

Molecular dynamics simulations on the interactions between nucleic acids and a phospholipid bilayer

Recently,lipid nanoparticles(LNPs)have been extensively investigated as non-viral carriers of nucleic acid vaccines due to their high transport efficiency,safety,and straightforward production and scalability.However,the molecular mechanism underlying the interactions between nucleic acids and phospholipid bilayers within LNPs remains elusive.In this study,we employed the all-atom molecular dynamics simulation to investigate the interactions between single-stranded nucleic acids and a phospholipid bilayer.Our findings revealed that hydrophilic bases,specifically G in single-stranded RNA(ssRNA)and single-stranded DNA(ssDNA),displayed a higher propensity to form hydrogen bonds with phospholipid head groups.Notably,ssRNA exhibited stronger binding energy than ssDNA.Furthermore,divalent ions,particularly Ca2+,facilitated the binding of ssRNA to phospholipids due to their higher binding energy and lower dissociation rate from phospholipids.Overall,our study provides valuable insights into the molecular mechanisms underlying nucleic acidphospholipid interactions,with potential implications for the nucleic acids in biotherapies,particularly in the context of lipid carriers.

Valley-dependent transport in a mescoscopic twisted bilayer graphene device

We study the valley-dependent electron transport in a four-terminal mesoscopic device of the two monolayer graphene nanoribbons vertically stacked together, where the intersection forms a bilayer graphene lattice with a controllable twist angle. Using a tight-binding lattice model, we show that the longitudinal and transverse conductances exhibit significant valley polarization in the low energy regime for small twist angles. As the twist angle increases, the valley polarization shifts to the high energy regime. This arises from the regrouping effect of the electron band in the twisted bilayer graphene region. But for relatively large twist angles, no significant valley polarization is observed. These results are consistent with the spectral densities of the twisted bilayer graphene.

Experimental investigation of omnidirectional multiphysics bilayer invisibility cloak with anisotropic geometry

Thermal-electric bilayer invisibility cloak can prevent the heat flux and electric current from touching the object without distorting the external temperature and electric potential fields simultaneously.In this paper,we design an omnidirectional thermal-electric invisibility cloak with anisotropic geometry.Based on the theory of neutral inclusion,the anisotropic effective thermal and electric conductivities of confocal elliptical bilayer core-shell structure are derived,thus obtaining the anisotropic matrix material to eliminate the external disturbances omnidirectionally.The inner shell of the cloak is selected as an insulating material to shield the heat flux and electric current.Then,the omnidirectional thermal-electric cloaking effect is verified numerically and experimentally based on the theoretical anisotropic matrix and manufactured composite structure,respectively.Furthermore,we achieve the thermal-electric cloaking effect under a specific direction of heat flux and electric current using the isotropic natural materials to broaden the selection range of materials.The method proposed to eliminate anisotropy and achieve the omnidirectional effect could also be expanded to other different physical fields for the metadevices with different functions.

Bilayer separator enabling dendrite-free zinc anode with ultralong lifespan >5000 h

Aqueous zinc(Zn)batteries with Zn metal anodes are promising clean energy storage devices with intrinsic safety and low cost.However,Zn dendrite growth severely restricts the use of Zn anodes.To effectively suppress Zn dendrite growth,we propose a bilayer separator consisting of commercial butter paper and glassfiber membrane.The dense cellulose-based butter paper(BP)with low zincophilicity and high mechanical properties prevents the pore-filling behavior of deposited Zn and related separator piercing,effectively suppressing the Zn dendrite growth.As a result,the bilayer separators endow the ZnjjZn symmetrical batteries with a superlong cycling life of Zn anodes(over 5000 h)at 0.5 mA cm^(-2) and the full batteries enhanced capacity retention,demonstrating the advancement of the bilayer separator to afford excellent cyclability of aqueous metal batteries.

Spin-polarized pairing induced by the magnetic field in the Bernal bilayer graphene

Recent experimental findings have demonstrated the occurrence of superconductivity in Bernal bilayer graphene when induced by a magnetic field.In this study,we conduct a theoretical investigation of the potential pairing symmetry within this superconducting system.By developing a theoretical model,we primarily calculate the free energy of the system with p+ip-wave parallel spin pairing,p+ip-wave anti-parallel spin pairing and d+i d-wave pairing symmetry.Our results confirm that the magnetic field is indeed essential for generating the superconductivity.We discover that the p+ip-wave parallel spin pairing leads to a lower free energy for the system.The numerical calculations of the energy band structure,zero-energy spectral function and density of states for each of the three pairing symmetries under consideration show a strong consistency with the free energy results.

Stacking-dependent exchange bias in two-dimensional ferromagnetic/antiferromagnetic bilayers

A clear microscopic understanding of exchange bias is crucial for its application in magnetic recording, and further progress in this area is desired. Based on the results of our first-principles calculations and Monte Carlo simulations,we present a theoretical proposal for a stacking-dependent exchange bias in two-dimensional compensated van der Waals ferromagnetic/antiferromagnetic bilayer heterostructures. The exchange bias effect emerges in stacking registries that accommodate inhomogeneous interlayer magnetic interactions between the ferromagnetic layer and different spin sublattices of the antiferromagnetic layer. Moreover, the on/off switching and polarity reversal of the exchange bias can be achieved by interlayer sliding, and the strength can be modulated using an external electric field. Our findings push the limits of exchange bias systems to extreme bilayer thickness in two-dimensional van der Waals heterostructures, potentially stimulating new experimental investigations and applications.

Wafer-scale 30°twisted bilayer graphene epitaxially grown on Cu_(0.75)Ni_(0.25)(111)

Twisted bilayer graphene(TBG) has been extensively studied because of its novel physical properties and potential application in electronic devices.Here we report the synthesis and characterization of 300 TBG naturally grown on Cu_(0.75)Ni_(0.25)(111) film and investigate the electronic structure by angle-resolved photoemission spectroscopy.Compared with other substrates,our TBG with a wafer scale is acquired with a shorter growth time.The Fermi velocity and energy gap of Dirac cones of TBG are comparable with those of a monolayer on Cu_(0.85)Ni_(0.15)(111).The signature of moré lattices has not been observed in either the low-energy electron diffraction patterns or the Fermi surface map within experimental resolution,possibly due to different Cu and Ni contents in the substrates enhancing the different couplings between the substrate and the first/second layers and hindering the formation of a quasiperiodic structure.

The Application of Bilayer Artificial Dermis Combined with VSD Technology in Chronic Wounds

Background: Bilayer artificial dermis promotes wound healing and offers a treatment option for chronic wounds. Aim: Examine the clinical efficacy of bilayer artificial dermis combined with Vacuum Sealing Drainage (VSD) technology in the treatment of chronic wounds. Method: From June 2021 to December 2023, our hospital treated 24 patients with chronic skin tissue wounds on their limbs using a novel tissue engineering product, the bilayer artificial dermis, in combination with VSD technology to repair the wounds. The bilayer artificial dermis protects subcutaneous tissue, blood vessels, nerves, muscles, and tendons, and also promotes the growth of granulation tissue and blood vessels to aid in wound healing when used in conjunction with VSD technology for wound dressing changes in chronic wounds. Results: In this study, 24 cases of chronic wounds with exposed bone or tendon larger than 1.0 cm2 were treated with a bilayer artificial skin combined with VSD dressing after wound debridement. The wounds were not suitable for immediate skin grafting. At 2 - 3 weeks post-treatment, good granulation tissue growth was observed. Subsequent procedures included thick skin grafting or wound dressing changes until complete wound healing. Patients were followed up on average for 3 months (range: 1 - 12 months) post-surgery. Comparative analysis of the appearance, function, skin color, elasticity, and sensation of the healed chronic wounds revealed superior outcomes compared to traditional skin fl repairs, resulting in significantly higher satisfaction levels among patients and their families. Conclusion: The application of bilayer artificial dermis combined with VSD technology for the repair of chronic wounds proves to be a viable method, yielding satisfactory therapeutic effects compared to traditional skin flap procedures.

Dynamic response of bilayered saturated porous media based on fractional thermoelastic theory

Considering the thermal contact resistance and elastic wave impedance at the interface,in this paper we theoretically investigate the thermo-hydro-mechanical(THM)coupling dynamic response of bilayered saturated porous media.Fractional thermoelastic theory is applied to porous media with imperfect thermal and mechanical contact.The analytical solutions of the dynamic response of the bilayered saturated porous media are obtained in frequency domain.Furthermore,the effects of fractional derivative parameters and thermal contact resistance on the dynamic response of such media are systematically discussed.Results show that the effects of fractional derivative parameters on the dynamic response of bilayered saturated porous media are related to the thermal contact resistance at the interface.With increasing thermal contact resistance,the displacement,pore water pressure,and stress decrease gradually.

One-step electrochemical fabrication of bilayered MgO/polymer coating on magnesium alloy

This research demonstrates a novel one-step electrochemical method to fabricate thick bilayer coatings on magnesium alloy in acid phosphate electrolyte containing aniline monomer and styrene-acrylic emulsion （SAE） with pulsed DC voltage, The morphologies, XRD and FTIR results show that the bilayer coating consists of an inner oxide layer and an outer polyaniline （PANI）/SAE composite layer, It is believed that the bilayered structure achieved results from a hybrid process combining electropoly-merization （EPM） of aniiine, electrophoretic deposition （EPD） of SAE and plasma electrolyte oxidation （PEO） of magnesium alloy substrate. Electrochemical corrosion tests indicate that the bilayer coating can provide superior corrosion protection to the magnesium alloy substrate in 3.5 wt.% NaCl solution.

Improving photoelectrochemical activity of dye sensitized solar cell by a bilayered electrode with an overlayer of mesoporous anatase TiO_2

For better performance of dye sensitized solar cells （DSSCs）, a bilayer structured electrode was constructed by employing a mesoporous anatase TiO2 overlayer above a commercial P25 TiO2 nanoparticles underlayer. The mesoporous anatase TiO2, prepared through a facile surfactant-assisted sol-gel process, possessed large pore size and well inter-connected network structure, both beneficial for dye adsorption and electron transfer. The dye adsorption capability of the mesoporous TiO2 was nearly twice that of the P25 counterpart. In the electrode, the mesoporous TiO2 film enhanced both dye adsorption and lightharvest, to increase photocurrent （Jsc） from 12.32 to 14.78 mA/cm^2. Compared to the single P25 TiO2 film, the synergy of the mesoporous TiO2 and the P25 TiO2 nanoparticle films in the electrode resulted in a 24% improvement in light-to-electricity conversion efficiency （η）. This bilayered electrode provides an alternative approach for further developing a photovoltaic device with better cell performance.

Transient swelling-induced finite bending of hydrogel-based bilayers:analytical and FEM approaches

Hydrogels with their time-dependent intrinsic behaviors have recently been used widely in soft structures as sensors/actuators.One of the most interesting structures is the bilayer made up of hydrogels which may undergo swelling-induced bending.In this work,by proposing a semi-analytical method,the transient bending of hydrogel-based bilayers is investigated.Utilizing nonlinear solid mechanics,a robust semi-analytical solution is developed which captures the transient finite bending of hydrogel-based bilayers.Moreover,the multiphysics model of the hydrogels is implemented in the finite element method(FEM) framework to verify the developed semi-analytical procedure results.The effects of different material properties are investigated to illustrate the nonlinear behavior of these structures.The von-Mises stress contour extracted from FEM shows that the critical area of these soft structures is at the interface of the layers which experiences the maximum stress,and this area is most likely to rupture in large deformations.

Customizing topological phases in the twisted bilayer superconductors with even-parity pairings

We investigate the topological properties of twisted bilayer superconductors with different even-parity pairings in each layer.In the presence of spin-orbit coupling,the Hamiltonian is mapped into an effective odd-parity superconductor.Based on this,we deduce the topological properties by examining the relative configuration between Fermi surface and Dirac pairing node.We show that mixed Rashba and Dresselhaus spin-orbit coupling and anisotropic hopping terms,which break the C_(4)symmetry of the Fermi surface,can induce first-order topological superconductors with non-zero bulk Chern number.This provides a versatile way to control the topological phases of bilayer superconductors by adjusting the twisted angle and chemical potential.We demonstrate our results using a typical twisted angle of 53.13°,at which the translation symmetry is restored and the Chern number and edge state are calculated using the Moir′e momentum.