Crosslinking treatments for a commercially available aromatic polyamide reverse osmosis membrane were carried out to improve its chlorine resistance.The crosslinking agents including 1,6-hexanediol diglycidyl ether,ad...Crosslinking treatments for a commercially available aromatic polyamide reverse osmosis membrane were carried out to improve its chlorine resistance.The crosslinking agents including 1,6-hexanediol diglycidyl ether,adipoyl dichloride and hexamethylene diisocyanate ester with long flexible aliphatic chains and high reactivity with N-H groups were used in the experiments.Attenuated total reflective Fourier transform infrared spectra verified the successful preparation of highly crosslinked membranes by crosslinking treatments.It was suggested that the crosslinking agents were connected to membrane surface through the reactions with amine and amide Ⅱ groups,which is confirmed by surface charge measurements.Based on contact angle measurements,crosslinking treatments decreased membrane hydrophilicity by introducing methylene groups to membrane surface.With increasing amount of crosslinking agent molecules connected to membrane surface,the hydrolysis of unconnected functional groups of crosslinking agent produced polar groups and increased membrane hydrophilicity.The highly crosslinked membranes showed higher salt rejections and lower water fluxes as compared with the raw membrane.Since the active sites(N-H groups) vulnerable to free chlorine on membrane surface were eliminated by crosslinking treatments,the chlorine resistances of the highly crosslinked membranes were significantly improved by slighter changes in both water fluxes and salt rejections after chlorination.展开更多
In order to obtain a novel polyamide having excellent heat-resistant properties which could be anticipated as a thermal modifier for aliphatic polyamide,a series of new semi-aromatic polyamides (BO6,BO8,BO10) containi...In order to obtain a novel polyamide having excellent heat-resistant properties which could be anticipated as a thermal modifier for aliphatic polyamide,a series of new semi-aromatic polyamides (BO6,BO8,BO10) containing benzoxazole unit were synthesized based on 5-amino-2-(p-aminophenyl) benzoxazole (ABO) and aliphatic acids (adipic,suberic and sebacic acid) by means of Yamazaki phosphorylation method.The effect of reaction temperature on the inherent viscosity of the polymers was studied,and the structures of products were characterized by FTIR,1 H-NMR,and the heat resistance of the polymers was studied by DSC and TG.The results showed that the reaction temperature gives the polymers the highest viscosity at around 90 ℃,130 ℃ and 130 ℃ for BO6,BO8 and BO10,respectively.The heat resistance of the new semi-aromatic polyamides is much higher than that of the common aliphatic polyamides.In addition,the products show good solvent resistance and crystallization properties.展开更多
Aromatic copolyamides were synthesized by the Yamazaki phosphorylation method starting from bis(4- carboxyphenyl) phenyl phosphine oxide,terephthalic acid and 4,4 -diaminodiphenyl methane.The copolymers with inherent ...Aromatic copolyamides were synthesized by the Yamazaki phosphorylation method starting from bis(4- carboxyphenyl) phenyl phosphine oxide,terephthalic acid and 4,4 -diaminodiphenyl methane.The copolymers with inherent viscosities of 0.52-0.99 dL/g were obtained.The structures of the copolyamides were characterized by elemental analysis, FTIR and NMR.The glass transition temperatures were measured by DSC and DMA,respectively,and the results showed that the T_gs of the polymers were higher than 287℃.Thermal de...展开更多
Super pure 2,5-dichloroterephthaloyl dichloride (DDC) was prepared by chlorination andcontrolled by Gas Chromatography(GC) method. As a third monomer, DDC waspolycondensated into chlorinated PPTA together with terepht...Super pure 2,5-dichloroterephthaloyl dichloride (DDC) was prepared by chlorination andcontrolled by Gas Chromatography(GC) method. As a third monomer, DDC waspolycondensated into chlorinated PPTA together with terephthaloyldichloide (TPDC) andparaphenylene diamine (PPDA). The polycondensation conditions and the relationship betweenthe thermal behavior, viscosity, solubility, phase transition temperature of the modifiedpolyamide and the third monomer content discussed in this paper.展开更多
The kinetics of mesophase formation of a lyotropic aromatic polyamide from isotropic state has been studied by means of depolarized light intensity. Avrami type analysis of the data gives an exponent close to 1, which...The kinetics of mesophase formation of a lyotropic aromatic polyamide from isotropic state has been studied by means of depolarized light intensity. Avrami type analysis of the data gives an exponent close to 1, which suggests the nucleation followed by one-dimensional growth. No influence of blending flexible chain from nylon 6 to the aromatic polyamide on the kinetics of mesophase formation was observed.展开更多
A series of dimer acid-based polyamides were synthesized by melt-polycondensation of dimer acid and various aromatic diamines, and were characterized by Fourier transform infrared spectrum （FT-IR） and nuclear magnet...A series of dimer acid-based polyamides were synthesized by melt-polycondensation of dimer acid and various aromatic diamines, and were characterized by Fourier transform infrared spectrum （FT-IR） and nuclear magnetic resonance （^1H NMR）. The physical properties of the polyamides, such as glass transition temperature, melting temperature, decomposition temperature and mechanical properties were also investigated. The polyamides＇ intrinsic viscosity ranges from 1.8 dL·g^-1 to 2.2 dL·g^-1, and the melting temperature ranges from 140 ℃ to 181 ℃. The glass transition temperatures, observed from dynamic mechanical analysis, fall in the range of 34.8-48.2 ℃. The physical and mechanical properties of the resultant polyamides are similar to those of the PA1212. The heat resistance and mechanical properties of poly （4, 4′-diphenylsulfone dimeramide） （PSD） and poly（4, 4′-di pb enyl dimeramide） （PPDI） are comparable to those of PA 1212.展开更多
Based on the polycondensation of bifunctional 2,2′-diamino-4,4′-bithiazole(DABT) and trifunctional 1,3,5-benzenetricarbonyl trichloride (BTC),a novel hyperbranched aromatic polyamide PBD was synthesized with excelle...Based on the polycondensation of bifunctional 2,2′-diamino-4,4′-bithiazole(DABT) and trifunctional 1,3,5-benzenetricarbonyl trichloride (BTC),a novel hyperbranched aromatic polyamide PBD was synthesized with excellent solubility and good thermal stability.The structure of the polymer was confirmed by FT-IR and 1H NMR spectrum.The calculated degree of branching of our product was 52%.By exploring the influence of several different solvent systems,the yield of the polymer increased in the solvent system of DMAc/LiCl.Two kinds of metal complexes were obtained by chelation of the polyamide with Cu2+ and Ni2+,and the metal contents of the complexes were determined by complexometric titration.The magnetic behaviors of the complexes were examined as a function of magnetic field strength at 5 K,and as a function of temperature (5–300 K) at a magnetic field strength of 2.4 × 106 A/m.The results indicated that the complexes were soft ferromagnetic materials with Curie-Weiss temperature at 102 K and 53 K,respectively.展开更多
A convenient tape-casting method was applied to prepare high performance aromatic polyamide(PA)films based on Technora®.During the polycondensation,CaO was introduced to improve the solubility of the PA resin,and...A convenient tape-casting method was applied to prepare high performance aromatic polyamide(PA)films based on Technora®.During the polycondensation,CaO was introduced to improve the solubility of the PA resin,and the generated halides were totally removed from the film via a simple water bath,without leaving any defects in PA films.The factors of processing temperature and immersion time had been systematically investigated,and the experimental results demonstrated that both of them had impressive impacts on aggregation state and comprehensive properties of the PA film.It was suggested that immersion in water for more than 1 min and baking below 300℃ for 10 min were the optimal conditions for the thermal,tensile,tear,and optical properties to be in the best equilibrium.The resultant PA films integrated outstanding film-forming ability and excellent general performance,especially the tensile property and tear resistance.展开更多
An aromatic polyamide was synthesized by low-temperature poly-condensation reaction from terephthaloyl chloride and 4,4'-diaminobenzanilide (4,4'-DABA). The synthesized polyamide had a characteristic peak of c...An aromatic polyamide was synthesized by low-temperature poly-condensation reaction from terephthaloyl chloride and 4,4'-diaminobenzanilide (4,4'-DABA). The synthesized polyamide had a characteristic peak of carbon atoms in the amide group at 166 ppm, which was demonstrated by the solid nuclear magnetic resonance carbon spectrum. It was shown to be the stretching vibration absorption peak of the amide N-H bond at 3342 cm<sup>−1</sup> by Fourier infrared (FT-IR) spectroscopy. It was obtained that the energy band near 1100 - 1276 cm<sup>−1</sup> belongs to the absorption peak of the para-substituted benzene ring and the band near 2977 cm<sup>−1</sup> was the C-H stretching vibration peak of the benzene ring by Raman spectroscopy. The molecular structure of the synthesized polyamide compound was confirmed by FT-IR, Raman, and solid <sup>13</sup>C-NMR spectroscopies. It was proved that the polymer is stable up to 300˚C and has a relatively high stability by the thermogravimetric analysis. It was also confirmed by the fluorescence spectrum that it has a strong blue fluorescence near 420 nm. The morphological characteristics of the polymer were further demonstrated by electron scanning electron microscopy (SEM). The properties of polymeric p-benzoyl-4,4'-diaminobenzoyl-aniline were found to emit strong blue fluorescence and have good thermal stability, making it a promising functional material for fluorescence in the blue region with potential for large-scale applications.展开更多
基金Supported by the National Natural Science Foundation of China （20676095）the Program of Introducing Talents of Discipline to Universities （B06006）
文摘Crosslinking treatments for a commercially available aromatic polyamide reverse osmosis membrane were carried out to improve its chlorine resistance.The crosslinking agents including 1,6-hexanediol diglycidyl ether,adipoyl dichloride and hexamethylene diisocyanate ester with long flexible aliphatic chains and high reactivity with N-H groups were used in the experiments.Attenuated total reflective Fourier transform infrared spectra verified the successful preparation of highly crosslinked membranes by crosslinking treatments.It was suggested that the crosslinking agents were connected to membrane surface through the reactions with amine and amide Ⅱ groups,which is confirmed by surface charge measurements.Based on contact angle measurements,crosslinking treatments decreased membrane hydrophilicity by introducing methylene groups to membrane surface.With increasing amount of crosslinking agent molecules connected to membrane surface,the hydrolysis of unconnected functional groups of crosslinking agent produced polar groups and increased membrane hydrophilicity.The highly crosslinked membranes showed higher salt rejections and lower water fluxes as compared with the raw membrane.Since the active sites(N-H groups) vulnerable to free chlorine on membrane surface were eliminated by crosslinking treatments,the chlorine resistances of the highly crosslinked membranes were significantly improved by slighter changes in both water fluxes and salt rejections after chlorination.
基金Sponsored by the Natural Scientific Research Innovation Foundation in Harbin of Institute of Technology(Grant No. 2008. 05)
文摘In order to obtain a novel polyamide having excellent heat-resistant properties which could be anticipated as a thermal modifier for aliphatic polyamide,a series of new semi-aromatic polyamides (BO6,BO8,BO10) containing benzoxazole unit were synthesized based on 5-amino-2-(p-aminophenyl) benzoxazole (ABO) and aliphatic acids (adipic,suberic and sebacic acid) by means of Yamazaki phosphorylation method.The effect of reaction temperature on the inherent viscosity of the polymers was studied,and the structures of products were characterized by FTIR,1 H-NMR,and the heat resistance of the polymers was studied by DSC and TG.The results showed that the reaction temperature gives the polymers the highest viscosity at around 90 ℃,130 ℃ and 130 ℃ for BO6,BO8 and BO10,respectively.The heat resistance of the new semi-aromatic polyamides is much higher than that of the common aliphatic polyamides.In addition,the products show good solvent resistance and crystallization properties.
基金supported by the National Natural Science Foundation of China (No.50203008).
文摘Aromatic copolyamides were synthesized by the Yamazaki phosphorylation method starting from bis(4- carboxyphenyl) phenyl phosphine oxide,terephthalic acid and 4,4 -diaminodiphenyl methane.The copolymers with inherent viscosities of 0.52-0.99 dL/g were obtained.The structures of the copolyamides were characterized by elemental analysis, FTIR and NMR.The glass transition temperatures were measured by DSC and DMA,respectively,and the results showed that the T_gs of the polymers were higher than 287℃.Thermal de...
文摘Super pure 2,5-dichloroterephthaloyl dichloride (DDC) was prepared by chlorination andcontrolled by Gas Chromatography(GC) method. As a third monomer, DDC waspolycondensated into chlorinated PPTA together with terephthaloyldichloide (TPDC) andparaphenylene diamine (PPDA). The polycondensation conditions and the relationship betweenthe thermal behavior, viscosity, solubility, phase transition temperature of the modifiedpolyamide and the third monomer content discussed in this paper.
基金This work was supported by Academia Sinica selected Research Program and National Natural Science Foundation of China
文摘The kinetics of mesophase formation of a lyotropic aromatic polyamide from isotropic state has been studied by means of depolarized light intensity. Avrami type analysis of the data gives an exponent close to 1, which suggests the nucleation followed by one-dimensional growth. No influence of blending flexible chain from nylon 6 to the aromatic polyamide on the kinetics of mesophase formation was observed.
文摘A series of dimer acid-based polyamides were synthesized by melt-polycondensation of dimer acid and various aromatic diamines, and were characterized by Fourier transform infrared spectrum （FT-IR） and nuclear magnetic resonance （^1H NMR）. The physical properties of the polyamides, such as glass transition temperature, melting temperature, decomposition temperature and mechanical properties were also investigated. The polyamides＇ intrinsic viscosity ranges from 1.8 dL·g^-1 to 2.2 dL·g^-1, and the melting temperature ranges from 140 ℃ to 181 ℃. The glass transition temperatures, observed from dynamic mechanical analysis, fall in the range of 34.8-48.2 ℃. The physical and mechanical properties of the resultant polyamides are similar to those of the PA1212. The heat resistance and mechanical properties of poly （4, 4′-diphenylsulfone dimeramide） （PSD） and poly（4, 4′-di pb enyl dimeramide） （PPDI） are comparable to those of PA 1212.
基金supported by the National Natural Science Foundation of China (20674071)the National Basic Research Program of China (973 Program,2005CB623800)
文摘Based on the polycondensation of bifunctional 2,2′-diamino-4,4′-bithiazole(DABT) and trifunctional 1,3,5-benzenetricarbonyl trichloride (BTC),a novel hyperbranched aromatic polyamide PBD was synthesized with excellent solubility and good thermal stability.The structure of the polymer was confirmed by FT-IR and 1H NMR spectrum.The calculated degree of branching of our product was 52%.By exploring the influence of several different solvent systems,the yield of the polymer increased in the solvent system of DMAc/LiCl.Two kinds of metal complexes were obtained by chelation of the polyamide with Cu2+ and Ni2+,and the metal contents of the complexes were determined by complexometric titration.The magnetic behaviors of the complexes were examined as a function of magnetic field strength at 5 K,and as a function of temperature (5–300 K) at a magnetic field strength of 2.4 × 106 A/m.The results indicated that the complexes were soft ferromagnetic materials with Curie-Weiss temperature at 102 K and 53 K,respectively.
基金supported by the National Natural Science Foundation of China(No.51973225).
文摘A convenient tape-casting method was applied to prepare high performance aromatic polyamide(PA)films based on Technora®.During the polycondensation,CaO was introduced to improve the solubility of the PA resin,and the generated halides were totally removed from the film via a simple water bath,without leaving any defects in PA films.The factors of processing temperature and immersion time had been systematically investigated,and the experimental results demonstrated that both of them had impressive impacts on aggregation state and comprehensive properties of the PA film.It was suggested that immersion in water for more than 1 min and baking below 300℃ for 10 min were the optimal conditions for the thermal,tensile,tear,and optical properties to be in the best equilibrium.The resultant PA films integrated outstanding film-forming ability and excellent general performance,especially the tensile property and tear resistance.
文摘An aromatic polyamide was synthesized by low-temperature poly-condensation reaction from terephthaloyl chloride and 4,4'-diaminobenzanilide (4,4'-DABA). The synthesized polyamide had a characteristic peak of carbon atoms in the amide group at 166 ppm, which was demonstrated by the solid nuclear magnetic resonance carbon spectrum. It was shown to be the stretching vibration absorption peak of the amide N-H bond at 3342 cm<sup>−1</sup> by Fourier infrared (FT-IR) spectroscopy. It was obtained that the energy band near 1100 - 1276 cm<sup>−1</sup> belongs to the absorption peak of the para-substituted benzene ring and the band near 2977 cm<sup>−1</sup> was the C-H stretching vibration peak of the benzene ring by Raman spectroscopy. The molecular structure of the synthesized polyamide compound was confirmed by FT-IR, Raman, and solid <sup>13</sup>C-NMR spectroscopies. It was proved that the polymer is stable up to 300˚C and has a relatively high stability by the thermogravimetric analysis. It was also confirmed by the fluorescence spectrum that it has a strong blue fluorescence near 420 nm. The morphological characteristics of the polymer were further demonstrated by electron scanning electron microscopy (SEM). The properties of polymeric p-benzoyl-4,4'-diaminobenzoyl-aniline were found to emit strong blue fluorescence and have good thermal stability, making it a promising functional material for fluorescence in the blue region with potential for large-scale applications.
