Accumulating operational experience in both aerobic and anaerobic mechanical biological waste treatment (MBT) makes it increasingly obvious that controlled water management would substantially reduce the cost of MBT...Accumulating operational experience in both aerobic and anaerobic mechanical biological waste treatment (MBT) makes it increasingly obvious that controlled water management would substantially reduce the cost of MBT and also enhance resource recovery of the organic and inorganic fraction. The MBT plant at Gescher, Germany, is used as an example in order to determine the quantity and composition of process water and leachates from intensive and subsequent rotting, pressing water from anaerobic digestion and scrubber water from acid exhaust air treatment, and hence prepare an MBT water balance. The potential of, requirements for and limits to internal process water reuse as well as the possibilities of resource recovery from scrubber water are also examined. Finally, an assimilated process water management concept with the purpose of an extensive reduction of wastewater quantity and freshwater demand is presented.展开更多
Landfill leachate is mainly the result of precipitation of water into the layers of buried waste, and biochemical reactions of waste that has dangerous substances and pollutants that lead to the contamination of surfa...Landfill leachate is mainly the result of precipitation of water into the layers of buried waste, and biochemical reactions of waste that has dangerous substances and pollutants that lead to the contamination of surface and groundwater resources. Therefore, it must be collected and treated properly. The investigation of various biological methods in leachate treatment, their advantages and disadvantages, and their effect on reduction of COD (chemical oxygen demand) are the objectives of this study. Reviewed processes include anaerobic and aerobic sequencing batch reactor, up-flow anaerobic sludge blanket, moving-bed biofilm reactor, membrane bioreactor, and aerated lagoons, lead to reduction of biodegradability pollutants in different circumstances. The present study has indicated that the most and the least reduction of COD has been through aerated lagoon (95%) and moving-bed biofilm reactor (8%), respectively.展开更多
Healthcare waste management and treatment is one of the national priority tasks of China’s Tenth Five-Year Plan. Numerous installations disposing medical waste have already operated the project or under construction ...Healthcare waste management and treatment is one of the national priority tasks of China’s Tenth Five-Year Plan. Numerous installations disposing medical waste have already operated the project or under construction to the operation in 2006. This paper focuses on the assessment of existing and future options to handle medical waste (MW). Internationally available and so far in China applied technologies and management practice are analysed, including the problems how to segregate medical waste streams at the source and to reduce the ‘critical waste’ to mainly infectious and aesthetically sensible materials. Non-hazardous MW can be managed and treated in analogue to municipal solid waste (MSW). In most of the European countries decentralised hospital incinerators have been, because of high operation costs and pollution problems, widely banned and replaced by pre-treatment technologies at the source and centralised incineration plants for hazardous MW. Information for adapting and further developing MW management solutions and treatment technologies in China and applying the most appropriate MWM practice is provided.展开更多
Membrane bioreactor (MBR) used in water and waste water treatment is a developing technique for water pollution control and water reuse. This paper described a membrane bioreactor for treatment of waste water in a pet...Membrane bioreactor (MBR) used in water and waste water treatment is a developing technique for water pollution control and water reuse. This paper described a membrane bioreactor for treatment of waste water in a petrochemical complex. The experimental MBR was a lab scale one composed of an activated sludge bioreactor unit and an ultrafiltration membrane unit. The relationship of COD removal with MLSS and HRT in this MBR was studied. The effects of crossflow velocity, backwash interval and volume of flush liquid on the flux were discussed. The results showed that average removal of COD, oil, SS and turbidity in petrochemical waste water by the MBR was 91%, 86%, 92% and 99%, respectively. The average removal of NH 3 N and total phosphorous was 85% and 82% respectively. A coefficient of COD removal, k , was 0017—0080 L/(mg.d). The membrane flux maintained higher than 60 L/hm 2 bar for 34 days without chemical cleaning when the velocity of crossflow was 35—39 m/s and the backwash interval was 30 minutes and backwash duration at 20 seconds. The results indicated that it is feasible for MBR technology to be used in petrochemical waste water treatment. The treated water could be considered as a source of to make up water for industrial cooling system or to be reused for other purposes.展开更多
Hydrocarbon wastes generated from remediation activities contain Total Petroleum Hydrocarbon (TPH), Polyaromatic Hydrocarbon (PAH) and Heavy Metals whose respective concentrations are yet to be determined. There is li...Hydrocarbon wastes generated from remediation activities contain Total Petroleum Hydrocarbon (TPH), Polyaromatic Hydrocarbon (PAH) and Heavy Metals whose respective concentrations are yet to be determined. There is limited available literature particularly in Nigeria, on whether the concentration of these wastes after treatment exceeds permissible limits. The present work aims to determine the concentration of petroleum hydrocarbon in the residual ash from the treated (incinerated) oily wastes from the Bodo-Ogoni remediation activities. Oily wastes residual ash samples were collected from six treatment sites, each divided into four replicates in a Completely Randomized Design. A total of twenty-four residual ash samples were collected and taken to National Oil Spill Detection and Response Agency (NOSDRA) Reference Laboratory, Port Harcourt for extraction. The concentration of TPH, PAH and heavy metals in untreated hydrocarbon wastes were also determined and used for the control experiment. The extracts were analyzed using AGILENT 7890A-GC and Atomic Absorption Spectrophotometer (AAS) modelled 240FS, manufactured in USA. The results show six residual pollutants;Cadmium, Lead, Zinc, Manganese, TPH and PAH below the Nigeria Department of Petroleum Resources (DPR) Intervention Level but exceeded the DPR Target Level for TPH and PAH. The descending order of concentration of PAH obtained from the treatment sites gwere;1.24 + 2.4 mg/kg (Paschal), 4.76 + 7.48 mg/kg (ITS), 10.46 + 14.68 mg/kg (TMCH) and 16.14 + 6.36 mg/kg (Mosab). Similarly, the concentration of TPH was 320.18 + 355.13 mg/kg (TMCH), 463.25 + 205.29 mg/kg (ICREN) and 501.11 + 300.79 mg/kg (Networld) against TPH 12,000 mg/kg, PAH 23 mg/kg, Cadmium 0.15 mg/kg, Lead 0.59 mg/kg, Zinc 3.45 mg/kg and Manganese 2.8 mg/kg (untreated wastes). Two treatment sites only recorded concentration of heavy metals, while four reformed inefficiently and couldn’t detect the concentration of some residual pollutants in the ash samples and consequently, recorded below detectable level (BDL). Statistical analysis showed a significant difference (P 0.05) between heavy metal content across sites and their target values. The results showed that the remediation activities had a strong impact on the concentration of TPH and PAH, and a weak impact on the concentration of heavy metals in the treated oily wastes. The implications of the results are discussed.展开更多
文摘Accumulating operational experience in both aerobic and anaerobic mechanical biological waste treatment (MBT) makes it increasingly obvious that controlled water management would substantially reduce the cost of MBT and also enhance resource recovery of the organic and inorganic fraction. The MBT plant at Gescher, Germany, is used as an example in order to determine the quantity and composition of process water and leachates from intensive and subsequent rotting, pressing water from anaerobic digestion and scrubber water from acid exhaust air treatment, and hence prepare an MBT water balance. The potential of, requirements for and limits to internal process water reuse as well as the possibilities of resource recovery from scrubber water are also examined. Finally, an assimilated process water management concept with the purpose of an extensive reduction of wastewater quantity and freshwater demand is presented.
文摘Landfill leachate is mainly the result of precipitation of water into the layers of buried waste, and biochemical reactions of waste that has dangerous substances and pollutants that lead to the contamination of surface and groundwater resources. Therefore, it must be collected and treated properly. The investigation of various biological methods in leachate treatment, their advantages and disadvantages, and their effect on reduction of COD (chemical oxygen demand) are the objectives of this study. Reviewed processes include anaerobic and aerobic sequencing batch reactor, up-flow anaerobic sludge blanket, moving-bed biofilm reactor, membrane bioreactor, and aerated lagoons, lead to reduction of biodegradability pollutants in different circumstances. The present study has indicated that the most and the least reduction of COD has been through aerated lagoon (95%) and moving-bed biofilm reactor (8%), respectively.
文摘Healthcare waste management and treatment is one of the national priority tasks of China’s Tenth Five-Year Plan. Numerous installations disposing medical waste have already operated the project or under construction to the operation in 2006. This paper focuses on the assessment of existing and future options to handle medical waste (MW). Internationally available and so far in China applied technologies and management practice are analysed, including the problems how to segregate medical waste streams at the source and to reduce the ‘critical waste’ to mainly infectious and aesthetically sensible materials. Non-hazardous MW can be managed and treated in analogue to municipal solid waste (MSW). In most of the European countries decentralised hospital incinerators have been, because of high operation costs and pollution problems, widely banned and replaced by pre-treatment technologies at the source and centralised incineration plants for hazardous MW. Information for adapting and further developing MW management solutions and treatment technologies in China and applying the most appropriate MWM practice is provided.
文摘Membrane bioreactor (MBR) used in water and waste water treatment is a developing technique for water pollution control and water reuse. This paper described a membrane bioreactor for treatment of waste water in a petrochemical complex. The experimental MBR was a lab scale one composed of an activated sludge bioreactor unit and an ultrafiltration membrane unit. The relationship of COD removal with MLSS and HRT in this MBR was studied. The effects of crossflow velocity, backwash interval and volume of flush liquid on the flux were discussed. The results showed that average removal of COD, oil, SS and turbidity in petrochemical waste water by the MBR was 91%, 86%, 92% and 99%, respectively. The average removal of NH 3 N and total phosphorous was 85% and 82% respectively. A coefficient of COD removal, k , was 0017—0080 L/(mg.d). The membrane flux maintained higher than 60 L/hm 2 bar for 34 days without chemical cleaning when the velocity of crossflow was 35—39 m/s and the backwash interval was 30 minutes and backwash duration at 20 seconds. The results indicated that it is feasible for MBR technology to be used in petrochemical waste water treatment. The treated water could be considered as a source of to make up water for industrial cooling system or to be reused for other purposes.
文摘Hydrocarbon wastes generated from remediation activities contain Total Petroleum Hydrocarbon (TPH), Polyaromatic Hydrocarbon (PAH) and Heavy Metals whose respective concentrations are yet to be determined. There is limited available literature particularly in Nigeria, on whether the concentration of these wastes after treatment exceeds permissible limits. The present work aims to determine the concentration of petroleum hydrocarbon in the residual ash from the treated (incinerated) oily wastes from the Bodo-Ogoni remediation activities. Oily wastes residual ash samples were collected from six treatment sites, each divided into four replicates in a Completely Randomized Design. A total of twenty-four residual ash samples were collected and taken to National Oil Spill Detection and Response Agency (NOSDRA) Reference Laboratory, Port Harcourt for extraction. The concentration of TPH, PAH and heavy metals in untreated hydrocarbon wastes were also determined and used for the control experiment. The extracts were analyzed using AGILENT 7890A-GC and Atomic Absorption Spectrophotometer (AAS) modelled 240FS, manufactured in USA. The results show six residual pollutants;Cadmium, Lead, Zinc, Manganese, TPH and PAH below the Nigeria Department of Petroleum Resources (DPR) Intervention Level but exceeded the DPR Target Level for TPH and PAH. The descending order of concentration of PAH obtained from the treatment sites gwere;1.24 + 2.4 mg/kg (Paschal), 4.76 + 7.48 mg/kg (ITS), 10.46 + 14.68 mg/kg (TMCH) and 16.14 + 6.36 mg/kg (Mosab). Similarly, the concentration of TPH was 320.18 + 355.13 mg/kg (TMCH), 463.25 + 205.29 mg/kg (ICREN) and 501.11 + 300.79 mg/kg (Networld) against TPH 12,000 mg/kg, PAH 23 mg/kg, Cadmium 0.15 mg/kg, Lead 0.59 mg/kg, Zinc 3.45 mg/kg and Manganese 2.8 mg/kg (untreated wastes). Two treatment sites only recorded concentration of heavy metals, while four reformed inefficiently and couldn’t detect the concentration of some residual pollutants in the ash samples and consequently, recorded below detectable level (BDL). Statistical analysis showed a significant difference (P 0.05) between heavy metal content across sites and their target values. The results showed that the remediation activities had a strong impact on the concentration of TPH and PAH, and a weak impact on the concentration of heavy metals in the treated oily wastes. The implications of the results are discussed.