Three sequencing batch reactors supplied with different carbon sources were investigated. The system supplied with glucose gained the best enhanced biological phosphorus removal although all of the three reactors were...Three sequencing batch reactors supplied with different carbon sources were investigated. The system supplied with glucose gained the best enhanced biological phosphorus removal although all of the three reactors were seeded from the same sludge. With the measurement of poly-β-hydroxyalkanoate （PHA） concentration, phosphorus content in sludge and extracellular exopolymers （EPS） with scanning electron microscopy （SEM） combined with energy dispersive spectrometry （EDS）, it was found that the biosorption effect of EPS played an important role in phosphorus removal and that the amount of PHA at the end of anaerobic phase was not the only key factor to determine the following phosphorus removal efficiency.展开更多
Phosphorus removal performance in an aerobic/aerobic sequencing batch reactor (SBR) supplied with glucose as carbon source was investigated. It was found that there was no phosphate release concomitant with the storin...Phosphorus removal performance in an aerobic/aerobic sequencing batch reactor (SBR) supplied with glucose as carbon source was investigated. It was found that there was no phosphate release concomitant with the storing of poly-β-hydroxyalkanoate (PHA) during the anaerobic phase. Whereas, glycogen was soon built up followed by rapid consumption, at the same time, glucose was depleted rapidly. Based on the analysis of different fractions of phosphorus in activated sludge, the relative ratio of organically bound phosphorus in sludge changed at the end of anaerobic and aerobic phases. The ratios were 45.3% and 51.8% respectively. This showed that the polyphosphate broke down during the anaerobic phase to supply part of energy for PHA synthesis. The reason why there was no phosphate release might be the biosorption effect of extracellular exopolymers (EPS). It was also proved by the analysis of EPS with scanning electron microscopy (SEM) combined with energy dispersive spectrometry (EDS). The phosphorus weight percentage of EPS at the end of anaerobic phase was 9.22%.展开更多
文摘Three sequencing batch reactors supplied with different carbon sources were investigated. The system supplied with glucose gained the best enhanced biological phosphorus removal although all of the three reactors were seeded from the same sludge. With the measurement of poly-β-hydroxyalkanoate （PHA） concentration, phosphorus content in sludge and extracellular exopolymers （EPS） with scanning electron microscopy （SEM） combined with energy dispersive spectrometry （EDS）, it was found that the biosorption effect of EPS played an important role in phosphorus removal and that the amount of PHA at the end of anaerobic phase was not the only key factor to determine the following phosphorus removal efficiency.
文摘Phosphorus removal performance in an aerobic/aerobic sequencing batch reactor (SBR) supplied with glucose as carbon source was investigated. It was found that there was no phosphate release concomitant with the storing of poly-β-hydroxyalkanoate (PHA) during the anaerobic phase. Whereas, glycogen was soon built up followed by rapid consumption, at the same time, glucose was depleted rapidly. Based on the analysis of different fractions of phosphorus in activated sludge, the relative ratio of organically bound phosphorus in sludge changed at the end of anaerobic and aerobic phases. The ratios were 45.3% and 51.8% respectively. This showed that the polyphosphate broke down during the anaerobic phase to supply part of energy for PHA synthesis. The reason why there was no phosphate release might be the biosorption effect of extracellular exopolymers (EPS). It was also proved by the analysis of EPS with scanning electron microscopy (SEM) combined with energy dispersive spectrometry (EDS). The phosphorus weight percentage of EPS at the end of anaerobic phase was 9.22%.
