Detection of UAV Target Based on Continuous Radon Transform and Matched Filtering Process for Passive Bistatic Radar

Long-time integration technique is an effective way of improving target detection performance for unmanned aerial vehicle(UAV)in the passive bistatic radar(PBR),while range migration(RM)and Doppler frequency migration(DFM)may have a major effect due to the target maneuverability.This paper proposed an innovative long-time coherent integration approach,regarded as Continuous Radon-matched filtering process(CRMFP),for low-observable UAV target in passive bistatic radar.It not only mitigates the RM by collaborative research in range and velocity dimensions but also compensates the DFM and ensures the coherent integration through the matched filtering process(MFP).Numerical and real-life data following detailed analysis verify that the proposed method can overcome the Doppler mismatch influence and acquire comparable detection performance.

Target detection using CDMA based passive bistatic radar

Recently, the code division multiple access （CDMA） waveform exists in the large area across the world. However, when using the CDMA system as the illuminator of opportunity for the passive bistatic radar （PBR）, there exists interference not only from the base station used as the illuminator of opportunity but also from other base stations with the same frequency. And be cause in the CDMA system, the signal transmitted by each base station is different, using the direct signal of one base station can not cancel the interference from other base stations. A CDMA based PBR using an element linear array antenna as both the reference antenna and surveillance antenna is introduced. To deal with the interference in this PBR system, an adaptive temporal cancellation algorithm is used to remove the interference from the base station used as the illuminator of opportunity firstly. And then a robust adaptive beamformer is used to suppress the interference from other base stations. Finally, the preliminary experiment re sults demonstrate the feasibility of using CDMA signals as a radar waveform.

Precise time frequency synchronization technology for bistatic radar

A complete method of synchronization technology of bistatic radar using global position system （GPS） is presented. The pulse per second signal （1PPS） is elaborately modified to increase the time synchronization precision and keep loop locking. A very high time synchronization precision is achieved. Using the modified 1PPS to discipline the local OCXO, the reference frequency signal achieves both high long term stability （LTS） and short term stability （STS） properties. An algorithm, named phase abrupt change CFAR is presented to restrain the 1PPS phase abrupt change and keep loop locking. The experimental results indicate that this time and frequency synchronization method is effective and the time synchronization precision of the synchronization system can be improved from ±100 ns to ±25 ns. In addition, the phase noise is improved to 20 dB.

Study of detection performance of passive bistatic radars based on FM broadcast

The passive bistatic radar based on the FM broadcast has inherent superiority with respect to its survivability. In this article, the ambiguity function （AF） and the cross ambiguity function （CAF） of the FM radio signal are analyzed and illustrated. The Kolmogorov Smirnov （K-S） test verifies that the amplitude probability density function of the CAF side lobes is exponential; the distribution of the target is also deduced. Finally, the detection performance of the passive radar is studied, and the result shows that this new type bistatic radar has favorable detection capability.

Target detection method in passive bistatic radar

Owing to the advantages in detecting the low altitude and stealth target,passive bistatic radar(PBR)has received much attention in surveillance purposes.Due to the uncontrollable characteristic of the transmitted signal,a high level range or Doppler sidelobes may exist in the ambiguity function which will degrade the target detection performance.Mismatched filtering is a common method to deal with the ambiguity sidelobe problem.However,when mismatched filtering is applied,sidelobes cannot be eliminated completely.The residual sidelobes will cause false-alarm when the constant false alarm ratio(CFAR)is applied.To deal with this problem,a new target detection method based on preprocessing is proposed.In this new method,the ambiguity range and Doppler sidelobes are recognized and eliminated by the preprocessing method according to the prior information.CFAR is also employed to obtain the information of the target echo.Simulation results and results on real data illustrate the effectiveness of the proposed method.

Space-time clutter model for airborne bistatic radar with non-Gaussian statistics

To validate the potential space-time adaptive processing （STAP） algorithms for airborne bistatic radar clutter suppression under nonstationary and non-Gaussian clutter environments, a statistically non-Gaussian, space-time clutter model in varying bistatic geometrical scenarios is presented. The inclusive effects of the model contain the range dependency of bistatic clutter spectrum and clutter power variation in range-angle cells. To capture them, a new approach to coordinate system conversion is initiated into formulating bistatic geometrical model, and the bistatic non-Gaussian amplitude clutter representation method based on a compound model is introduced. The veracity of the geometrical model is validated by using the bistatic configuration parameters of multi-channel airborne radar measurement （MCARM） experiment. And simulation results manifest that the proposed model can accurately shape the space-time clutter spectrum tied up with specific airborne bistatic radar scenario and can characterize the heterogeneity of clutter amplitude distribution in practical clutter environments.

Joint adaptive waveform and baseline range design for bistatic radar

The problems of joint adaptive waveform design and baseline range design for bistatic radar to maximize the practical radar resolution were considered.Distinguishing from the conventional ambiguity function(AF)-based resolution which is only related with the transmitted waveform and bistatic geometry and could be regarded as the potential resolution of a bistatic radar system,the practical resolution involves the effect of waveform,signal-to-noise ratio(SNR)as well as the measurement model.Thus,it is more practical and will have further significant application in target detection and tracking.The constraint optimization procedure of joint adaptive waveform design and baseline range design for maximizing the practical resolution of bistatic radar system under dynamic target scenario was devised.Simulation results show that the range and velocity resolution are enhanced according to the adaptive waveform and bistatic radar configuration.

Application Research on Space Laser Communication in Bistatic Radar System

There exist three synchronizing problems in the bistatic radar system that some signals of the radar receiver must be synchronized with those of the radar transmitter. Several methods realizing data transmission, which are used to complete the synchronization existing in the bistatic radar system, are described. Then a new idea is brought forward that employs space laser communication in the bistatic radar system to realize its data transmission. The theoretic analysis of the idea's usability and its merits are discussed in details. Finally the latest development of space laser communication is introduced, and the utility of the idea is pointed out further.

COMPLETE PARAMETER MEASUREMENT FOR MIMO BISTATIC RADAR WITHOUT SYNCHRONIZATION

In order to measure the range, angle, and Doppler frequency of the target without any synchronization in the bistatic radar, a novel complete parameter estimation method based on separability of a pair of Linear Frequency Modulation (LFM) signal is presented. The Doppler fre-quency is measured by the time difference between two peak positions corresponding to the positive and the negative LFM return signal respectively. Direction Of Departures (DODs) and Direction Of Arrivals (DOAs) of the target are estimated by constructing a special eigenmatrix in which the es-timated angles can be extracted from the eigenvalue or the eigenvector. The target position can be located in the presence of the estimated DODs, DOAs and the signal delay difference between the echo and the directive wave signal in Multiple Input Multiple Output (MIMO) bistatic radar without any synchronization. The correctness and effectiveness of the proposed method are verified by the computer simulation.

Track-before-detect for bistatic radar based on pseudo-spectrum

Track-Before-Detect(TBD) is an efficient method to detect dim targets for radars. Conventional TBD usually follows an approximate motion model of the target, which may cause an inaccurate integration of the target energy. A TBD technique on basis of pseudo-spectrum in mixed coordinates adopting an accurate motion model for bistatic radar system is developed in this paper.The predicted position in bistatic polar plane is derived according to a nonlinear function that exactly describes the constant Cartesian velocity motion. Then around the predicted position, a pseudo-spectrum is formulated and its samples are accumulated to the integration frame for energy integration. The evolution of the state and the procedure of accumulation of the target energy are derived elaborately. The superior performance of the proposed method is demonstrated by some simulations.

Direction finding of bistatic MIMO radar in strong impulse noise

For bistatic multiple-input multiple-output(MIMO)radar,this paper presents a robust and direction finding method in strong impulse noise environment.By means of a new lower order covariance,the method is effective in suppressing impulse noise and achieving superior direction finding performance using the maximum likelihood(ML)estimation method.A quantum equilibrium optimizer algorithm(QEOA)is devised to resolve the corresponding objective function for efficient and accurate direc-tion finding.The results of simulation reveal the capability of the presented method in success rate and root mean square error over existing direction-finding methods in different application situations,e.g.,locating coherent signal sources with very few snapshots in strong impulse noise.Other than that,the Cramér-Rao bound(CRB)under impulse noise environment has been drawn to test the capability of the presented method.

Robust mismatched filtering algorithm for passive bistatic radar using worst-case performance optimization

Passive bistatic radar detects targets by exploiting available local broadcasters and communication transmissions as illuminators, which are not designed for radar. The signal usually contains a time-varying structure, which may result in high-level range ambiguity sidelobes. Because the mismatched filter is effective in suppressing sidelobes, it can be used in a passive bistatic radar. However, due to the low signal-to-noise ratio in the reference signal, the sidelobe suppression performance seriously degrades in a passive bistatic radar system. To solve this problem, a novel mismatched filtering algorithm is developed using worst-case performance optimization. In this algorithm, the influence of the low energy level in the reference signal is taken into consideration, and a new cost function is built based on worst-case performance optimization. With this optimization, the mismatched filter weights can be obtained by minimizing the total energy of the ambiguity range sidelobes. Quantitative evaluations and simulation results demonstrate that the proposed algorithm can realize sidelobe suppression when there is a low-energy reference signal. Its effectiveness is proved using real data.

Doppler ambiguity analysis and suppression for LTE-based passive bistatic radars

In this study,we provide a detailed analysis of the frequency division duplex long term evolution downlink(FDD LTE DL)signal for passive bistatic radars that use the signal as an illuminator of opportunity.In particular,we analyze the crossambiguity function and illustrate its undesired deterministic peaks in the Doppler dimension due to the specific structure of the FDD LTE DL signal.A new adaptive mismatched filtering method is proposed for pre-processing the original reference signal to suppress these undesired deterministic peaks in the range-Doppler processing.The effectiveness of our proposed method is demonstrated via simulations following robustness analysis,showing that all undesired peaks are suppressed below-40 dB,with only 1.7 dB reduction in the main peak.

An interference suppression algorithm for cognitive bistatic airborne radars

Interference suppression is a challenge for radar researchers, especially when mainlobe and sidelobe interference coexist. We present a comprehensive anti-interference approach based on a cognitive bistatic airborne radar. The risk of interception is reduced by lowering the launch energy of the radar transmitting terminal in the direction of interference;main lobe and sidelobe interferences are suppressed via cooperation between the two radars. The interference received by a single radar is extracted from the overall radar signal using multiple signal classification(MUSIC), and the interference is cross-located using two different azimuthal angles. Neural networks allowing good, non-linear nonparametric approximations are used to predict the location of interference, and this information is then used to preset the transmitting notch antenna to reduce the likelihood of interception. To simultaneously suppress mainlobe and sidelobe interferences, a blocking matrix is used to mask mainlobe interference based on azimuthal information, and an adaptive process is used to suppress sidelobe interference. Mainlobe interference is eliminated using the data received by the two radars. Simulation verifies the performance of the model.

Extended ambiguity function for bistatic MIMO radar

This paper derives the extended ambiguity function for a bistatic multiple-input multiple-output （MIMO） radar system, which includes the whole radar system parameters： geometric sensor configuration, waveforms, range, range rate, target scattering and noise characteristics. Recent research indicates the potential pa- rameter estimate performance of bistatic MIMO radars. And this ambiguity function can be used to analyze the parameter estimate performance for the relationship with the Cramer-Rao bounds of the estimated parameters. Finally, some examples are given to demonstrate the good parameter estimate performance of the bistatic MIMO radar, using the quasi-orthogonal waveforms based on Lorenz chaotic systems.

Multi-target localization for bistatic MIMO radar in the presence of unknown mutual coupling

A decoupling-estimation signal parameters via rotarional invariance technique（ESPRIT） method is presented for multi-target localization with unknown mutual coupling in bistatic multiple-input multiple-output（MIMO） radar.Two steps are carried out in this method.The decoupling operation between angle and mutual coupling estimates is realized by choosing the auxiliary elements on both sides of the transmit and receive uniform linear arrays（ULAs）.Then the ESPRIT method is resilient against the unknown mutual coupling matrix（MCM） and can be directly utilized to estimate the direction of departure（DOD） and the direction of arrival（DOA）.Moreover,the mutual coupling coefficient is estimated by finding the solution of the linear constrained optimization problem.The proposed method allows an efficient DOD and DOA estimates with automatic pairing.Simulation results are presented to verify the effectiveness of the proposed method.

Impacts of space-time-frequency synchronization errors onwide-band target echo characteristics of bistatic/multistatic radar

Bistatic/multistatic radar has great potential advantages over its monostatic counterpart. However, the separation of a transmitter and a receiver leads to difficulties in locating the target position accurately and guaranteeing space-timefrequency synchronization of the transmitter and the receiver.The error model of space-time-frequency synchronization in a motion platform of bistatic/multistatic radar is studied. The relationship between the space synchronization error and the transmitter platform position, receiver platform position, moving state, and beam pointing error, is analyzed. The effect of space synchronization error on target echo power is studied. The target scattering characteristics are restructured by many separate scattering centers of the target in high frequency regions. Based on the scattering centers model of the radar target, this radar target echo model and the simulation method are discussed. The algorithm of bistatic/multistatic radar target echo accurately reflects the scattering characteristics of the radar target, pulse modulation speciality of radar transmitting signals, and spacetime-frequency synchronization error characteristics between the transmitter station and the receiver station. The simulation of bistatic radar is completed in computer, and the results of the simulation validate the feasibility of the method.

Improved chirp scaling algorithm integrated motion compensation for parallel-track bistatic synthetic aperture radar

To compensate motion errors of images from the parallel-track bistatic synthetic aperture radar（BiSAR）,an improved chirp scaling algorithm（CSA） is proposed.Since velocity vector of the moving aircrafts in the parallel-track BiSAR system can not remain invariant in an aperture,an actual aperture is divided into subapertures so that it is reasonable to assume that the aircrafts move with constant acceleration vector in a subaperture.Based on this model,an improved CSA is derived.The new phase factors incorporate three-dimensional acceleration and velocity.The motion compensation procedure is integrated into the CSA without additional operation required.The simulation results show that the presented algorithm can efficiently resolve motion compensation for parallel-track BiSAR.

Spatial Channel Sounding Based on Bistatic Synthetic Aperture Radar Principles

In this paper, we propose a simplified spatial channel sounding method by utilizing bistatic synthetic aperture radar(BiSAR) principles. Despite the different deployment geometries compared with a conventional BiSAR system, the feasibility of the approach is established by 1) the proposed method achieves a better spatial resolution than conventional directional channel sounders and 2) reconstruction algorithms based on time-domain backprojection in conjunction with a digital elevation model provide a good imaging performance and are suitable for reconstructing the spatial distribution of scatterers. Simulations of a high-speed rail(HSR) scenario demonstrate that the estimated power delay profiles(PDPs) and power angle profiles(PAPs) are close to the actual values.

New Precision Guidance Method Based on Bistatic Synthetic Apterture Radar

A new method is presented to improve guidance precision. This method is based on bistatic synthetic aperture radar. The illuminator works in side looking mode, providing the synthetic aperture and the receiver is disposed on the seeker which operates in the forward looking mode. The receiving antenna is composed of four sub-antennas and so four synthetic aperture radar （SAR） images are to be generated. Target is positioned in SAR images by image matching. The bearing and elevation of image element of target are measured by the principle of monopulse angular measurement. Theory of the proposed method is derived and simulation on bearing measurement is done. Simulation shows that the method is valid and if SNR of target＇s image is above 30 dB, the angular measuring difference is within the confines of 0.04 degree.