Vibrations measurements for shrouded blades of steam turbines based oneddy current sensors with high frequency response

With the development of power plants towards high power and intelligent operation direction,the vibrations or failures of blades,especially the last stage blades in steam turbines,happen more frequently due to the unstable operating conditions brought by flexible operation.A vibration measuring method for the shrouded blades of a steam turbine based on eddy current sensors with high frequency response is proposed,meeting the requirements of non-contact heath monitoring.The eddy current sensors produce the signals which are related to the area changing of every blade’s shroud resulting from the rotation of stator.Then an improved blade tip timing(BTT)technique is proposed to detect the vibrations of shrouded blades by measuring the arrival time of each area changing signal.A structure of eddy current sensors is developed in steam turbines and an amplitude modulation/demodulation circuit is designed to improve the response bandwidth up to 250 kHz.Vibration tests for the last stage blades of a steam turbine were carried out and the results validate the efficiency of the improved BTT technique and the high frequency response of the eddy current sensors presented.

Study of the helicopter blade running elevation measurement system

Helicopter blade running elevation measurement is an important measure target in helicopter blade dynamic balance experimentation. The elevation influences the helicopter＇ s security and other performance capabilities. In testing, however, it has been difficult to measure the elevation when the rotor reaches high speeds. To get a simple, fast and highly accurate measurement system, photo electricity technology was applied to measuring the blade running elevation. Discussed is the measurement principle of blade running elevation, tire design of the measurement system and analysis of the measurement precision.

Optical Fiber Sensor's Applied in Vibration Measurement of Turbine Blade

A new type optical fiber sensor--Tip timing Sensor is introduced in this paper. It is mostly used in vibration measurement of turbine blade, which can realize real-time and non-contact measurement.

An experimental method for squealer tip flow field considering relative casing motion

Squealer tip is widely used in turbines to reduce tip leakage loss.In typical turbine environment,the squealer tip leakage flow is affected by multiple factors such as the relative casing motion and the wide range of variable incidence angles.The development of experimental methods which can accurately model the real turbine environment and influencing factors is of great significance to study the squealer tip leakage flow mechanism.In the present paper,a low-speed turbine cascade test facility which can model the relative casing motion and wide range of variable incidence angles(-25°to 55°)is built.Based on the similarity criteria,a high-low speed similarity transformation method of the turbine cascade is established by considering the thickness of the turbine blade.A combined testing method of Particle Image Velocimetry(PIV)and local pressure measurement is proposed to obtain the complex flow structures within the tip cavity.The results show that the experimental method can successfully model the relative casing motion and the wide range of variable incidence angles.The low-speed cascade obtained by the similarity transformation can model the high-speed flow accurately.The measurement technique developed can obtain the complex flow field and successfully capture the scraping vortex within the squealer tip.