Synthesis and characterization of H-type amphiphilic liquid crystalline block copolymers by ATRP

H-type amphiphilic liquid crystalline block copolymers containing azobenzene were synthesized by atom transfer radical polymerization （ATRP）. Macroinitiators prepared by the esterification between poly（ethylene oxide） （PEG） and 2,2-dichloroacetyl chloride were utilized to initiate the polymerization of 6-[4-（4-ethoxyphenylazo）phenoxy]hexyl rnethacrylate （M6C）. The resulting macroinitiators and block copolymers were characterized by ^1H NMR, gel permeation chromatography （GPC）. Polarizing optical microscopy （POM） and differential scanning calorimetry （DSC） preliminarily revealed the liquid crystalline property of these block copolymers. This series of liquid crystalline block copolymers are promising in some areas, such as optical data storage, optical switch, and molecular devices.

Y-shaped block copolymers of poly(ethylene glycol) and poly(N-isopropylacrylamide) synthesized by ATRP

Novel Y-shaped block copolymers of poly（ethylene glycol） and poly（N-isopropylacrylamide）, PEG-b-（PNIPAM）2, were successfully synthesized through atom transfer radical polymerization （ATRP）. A difunctional macroinitiator was prepared by esterification of 2,2-dichloroacetyl chloride with poly（ethylene glycol） monomethyl ether （PEG）. The copolymers were obtained via the ATRP ofN-isopropylacrylamide （NIPAM） at 30℃ with CuCl/Me6TREN as a catalyst system and DMF/H2O （v/v = 3：1） mixture as solvent. The resulting copolymers were characterized by gel permeation chromatography （GPC） and ^1H NMR. These block copolymers show controllable molecular weights and narrow molecular weight distributions （PDI 〈 1.15）. Their phase transition temperatures and the corresponding enthalpy changes in aqueous solution were measured by differential scanning calorimetry （DSC）. As a result, the phase transition temperature of PEG45-b-（PNIPAM55）2 is higher than that of PNIPAM, however, the corresponding enthalpy change is much lower, indicating the significant influence of the macromolecular composition and architecture on the phase transition.

NUCLEATION AND CRYSTALLIZATION OF H-SHAPED(PS)_2PEG(PS)_2 BLOCK COPOLYMERS

A series of H-shaped （PS）2PEG（PS）2 block copolymers with different PS chain lengths were prepared. The influence of different confinements active on the crystallization and self-nucleation （SN） behavior of the PEG blocks was investigated by differential scanning calorimetry （DSC）. When the content of the crystalline block was high, a classical SN behavior was obtained. The block copolymer with PEG content of 49% （by weight） showed a classical SN behavior with a narrow self-nucleation domain and had bimodal crystallization exotherms. When the PEG dispersed as separated microdomains in the block copolymer, the self-nucleation domain disappeared and only annealing was observed.

Revealing the working mechanism of a multi-functional block copolymer binder for lithium-sulfur batteries

The lithium-sulfur(Li-S)battery is one of the most promising substitutes for current energy storage systems because of its low cost,high theoretical capacity,and high energy density.However,the high solubility of intermediate products(i.e.,lithium polysulfides)and the resultant shuttle effect lead to rapidly fading capacity and a low coulombic efficiency,which hinder the practical application of Li-S batteries.In this study,block copolymers are constructed with both an ethylene oxide unit and a styrene unit and then used as binders for Li-S batteries.Electrochemical performance improvements are attributed to the synergistic effects contributed by the different units of the block copolymer.The ethylene oxide unit traps polysulfide,which bonds strongly with the intermediate lithium polysulfide,and enhances the transport of lithium ions to reach high capacity.Meanwhile,the styrene unit maintains cathode integrity by improving the mechanical properties and elasticity of the constructed block copolymer to accommodate the large volume changes.By enabling multiple functions via different units in the polymer chain,high sulfur utilization is achieved,polysulfide diffusion is confined,and the shuttle effect is suppressed during the cycle life of Li-S batteries,as revealed by operando ultraviolet-visible spectroscopy and S Kedge X-ray absorption spectroscopy.

Block copolymer electrolyte with adjustable functional units for solid polymer lithium metal battery

Solid polymer electrolytes have been considered as the promising candidates to improve the safety and stability of high-energy lithium metal batteries.However,the practical applications of solid polymer electrolytes are still limited by the low ionic conductivity,poor interfacial contact with electrodes,narrow electrochemical window and weak mechanical strength.Here,a series of novel block copolymer electrolytes with three-dimensional networks are designed by cross-linked copolymerization of the polyethylene glycol soft segments and hexamethylene diisocyanate trimer hard segments.Their ionic migration performances and interface compatibilities with Li metal anode have been optimized delicately by tailoring the ratio of these functional units.The optimized block copolymer electrolyte has shown an amorphous crystalline structure,a high ionic conductivity of ~5.7×10^(-4)S cm^(-1),high lithium ion transference number(~0.49),wide electrochemical window up to ~4.65 V(vs.Li+/Li) and favorable mechanical strength at 55℃.Furthermore,the enhanced interface compatibility can well support the normal operations of lithium metal batteries using both LiFePO4 and LiNi0.8Co0.15Al0.05O2 cathodes.This study not only paves a new way to develop solid polymer electrolyte with optimizing functional units,but also provides a polymer electrolyte design strategy for the application demand of lithium metal battery.

SYNTHESIS AND CHARACTERIZATION OF HYDROPHOBIC-HYDROPHILIC MULTIBLOCK COPOLYMERS FOR BIOMEDICAL APPLICATIONS

The synthesis and characterization of amphiphilic copolymers of poly（dimethyl siloxane）(PDMS),poly（ethylene oxide）(PEO), and heparin（Hep） were investigated. These multiblock copolymers wereidentified using;H-NMR, FTIR, end group analysis, and sulfur elemental analysis. The multiblockcopolymers were characterized by using DSC and X-ray diffractometry. The glass transition temperature,crystalline melting characteristics, annealing effect, and cold crystallization of the block copolymers weredetermined by DSC. The crystallinity of the block copolymers was also determined by X-ray diffractionmethod.

Epoxidation of Styrene-Isoprene-Styrene Block Copolymer and Research on Its Reaction Mechanism

Styrene-isoprene-styrene（SIS） block copolymer was modified into epoxidized styrene-isoprene-styrene（ESIS） block copolymer with performic acid generated in situ from hydrogen peroxide and formic acid.The structure and property of ESIS were characterized by Fourier transform infrared（FT-IR） spectroscopy,gel permeation chromatography（GPC）,thermogravimetric/differential thermogravimetric（TG/DTG）,melt flow rate（MFR） and dynamic mechanical analysis（DMA）,and the reaction mechanism in the process of epoxidation was analyzed.The results showed that C=C double bonds of 1,4-structure were more active than that of 3,4-structure in polyisoprene chains.With epoxidation reaction proceeding,the whole tendency of molecular weight increased and molecular weight distribution widened,and MFR firstly increased and latterly decreased.The heat resistance of ESIS was superior to that of SIS.When SIS was changed into ESIS with 15.3% of mass fraction of epoxide groups,Tg of polyisoprene chains increased from-45.3 ℃ to 10.9 ℃.In the earlier period of epoxidation,some molecular chains ruptured and new substances with low molecular weight formed.However,in the latter period,crosslinking reaction between molecular chains which was initiated by epoxide groups or C=C double bonds occurred and crosslinked insoluble substances came into being.

Synthesis and characterization of poly(phthalazinone ether nitrile) (PPEN)-polydimethylsiloxane (PDMS) block copolymers

Block copolymers with different backbone compositions have been prepared by the condensation of dimethylamino terminated poly（dimethylsiloxane） （PDMS） and hydroquinone terminated poly（phthalazinone ether nitrile） （PPEN） in the presence of chlorobenzcne/N-methyl pyrrolidone （NMP） as solvents. The products were characterized by FTIR, ^1H NMR and gel permeation chromatography. Differential scanning calorimetry analysis indicated that the block copolymers showed separated microphase.

Directed self-assembly of block copolymers for sub-10 nm fabrication

Directed self-assembly(DSA)emerges as one of the most promising new patterning techniques for single digit miniaturization and next generation lithography.DSA achieves high-resolution patterning by molecular assembly that circumvents the diffraction limit of conventional photolithography.Recently,the International Roadmap for Devices and Systems listed DSA as one of the advanced lithography techniques for the fabrication of 3-5 nm technology node devices.DSA can be combined with other lithography techniques,such as extreme ultra violet(EUV)and 193 nm immersion(193i),to further enhance the patterning resolution and the device density.So far,DSA has demonstrated its superior ability for the fabrication of nanoscale devices,such as fin field effect transistor and bit pattern media,offering a variety of configurations for high-density integration and low-cost manufacturing.Over 1 T in-2 device density can be achieved either by direct templating or coupled with nanoimprinting to improve the throughput.The development of high x block copolymer further enhances the patterning resolution of DSA.In addition to its superiority in high-resolution patterning,the implementation ofDSA on a 300 mm pivot line fully demonstrates its potential for large-scale,high-throughput,and cost-effective manufacturing in industrial environment.

Synthesis of Well-Defined Dendritic-Linear Diblock and Triblock Copolymers by Controlled Free Radical Polymerization

The design and synthesis of novel dendritic-linear block copolymers were described. The copolymers were synthesized by atom transfer radical polymerization (ATRP) using dendritic polyarylether 2-bromoisobutyrate macroinitiator. ATRP carried out in bulk with CuBr/bipy catalyst at 120癈, yielded well-defined block copolymers with polydispersities less than 1.36.

Mushroom-shaped Morphology Formed in Thin Films of Cylinder-forming Block Copolymer

The morphology of the film of polystyrene-block-poly（methyl methacrylate）（PS-b-PMMA） block copolymer having polystyrene（PS） cylinder forming composition spin-coated on a neutral brush modified silicon substrate has been investigated in this report. A mushroom-shaped morphology formed in the film with one period to two periods（L0--2L0） in thickness, which was spin-coated under a low humidity condition（RH ca.13%） and then thermally annealed at an extreme high temperature（230 ℃）. The results suggest that the spin-coating condition together with the confinement conditions plays a crucial role in the interesting morphology formation.

Phase transition of a diblock copolymer and homopolymer hybrid system induced by different properties of nanorods

We investigated phase transitions in a diblock copolymer–homopolymer hybrid system blended with nanorods（NRs）by using the time-dependent Ginzburg–Landau theory. We systematically studied the effects of the number, length and infiltration properties of the NRs on the self-assembly of the composites and the phase transitions occurring in the material.An analysis of the phase diagram was carried out to obtain the formation conditions of sea island structure nanorodbased aggregate, sea island structure nanorod-based dispersion, lamellar structure nanorod-based multilayer arrangement and nanowire structure. Further analysis of the evolution of the domain sizes and the distribution of the nanorod angle microphase structure was performed. Our simulation provides theoretical guidance for the preparation of ordered nanowire structures and a reference to improve the function of a polymer nanocomposite material.

MORPHOLOGICAL TRANSITION BETWEEN VESICLES AND TUBULES FOR A GLYCOPOLYMER-CONTAINING AMPHIPHILIC DIBLOCK COPOLYMER IN AQUEOUS SOLUTIONS

The morphological transition of molecular assemblies in aqueous solutions for a new amphiphilic diblock copolymer induced by changing the initial solvent conditions was studied by transmission electron microscopy (TEM). The copolymer was polystyrene(77)-b-poly[2-(beta -D-glucopyranosyloxy)ethyl acrylate (6)] (PSt(77)-b-PGEA(6)) and the solvent was a mixture of DMF and THF. PSt(77)-b-PGEA(6) yields vesicles and tubules when it is initially dissolved in THF and DMF respectively. The morphological transition between vesicles and tubules can be achieved by simply varying the amounts of THF and DMF, or changing the temperature at which the aggregates were prepared.

POLYCAPROLACTONE-POLY (ETHYLENE GLYCOL) BLOCK COPOLYMER Ⅲ DRUG RELEASE BEHAVIOR

The drug release behavior of degradable polymer--polycaprolactone-poly (ethyleneglycol)block copolymer(PCE) in vitro was investigated by using 5-Fluoro-uracil (5-Fu) asa model drug under a condition of pH 7. 4 at 37C. It is found that the release rate of 5-Fufrom PCE increased with increasing polyether content of the copolymer. The results showthat the increasing polyether content of the copolymer caused increasing hydrophilicity anddecreasing crystallinity of the PCE copolymer. Thus, the drug release behavior and thedegradable property of the PCE can be controlled by adjusting the composition of thecopolymer.

STRUCTURE EVOLUTION OF THE CYLINDRICAL PHASE OF DIBLOCK COPOLYMERS IN FILMS

In the weak segregation limit,the structure evolution of the hexagonal cylindrical phase of diblock copolymers in films was investigated.Employing the Landau-Brazovskii mean field theory,we obtained three amplitude parameters as functions of temperature,surface field strength and film thickness.By controlling confinement size and surface field strength, lamellae and undulated lamellae appear in the cylindrical bulk phase of diblock copolymers.'Phase diagrams'of confinement-induced structures are constructed...

ROD-LIKE AGGREGATES FROM POLYSTYRENE-b-POLY(4-VINYLPYRIDINE)-b-POLYSTYRENE TRIBLOCK COPOLYMER IN AQUEOUS MEDIA

The rod-like assembly from BAB block copolymer with hydrophilic middle block A in aqueous solution was described. The copolymer used is polystyrene (PS)39-b-poly(4-vinylpyridine)(P4VP)98-b-PS39 (the subscripts are the average polymerization degree of corresponding blocks) triblock copolymer with Mw/Mn = 1.15. The aggregates were characterized by transmission electron microscopy and atomic force microscopy. The dependence of rod-like aggregate formation on solvents, pH, and polymer concentrations was investigated. The rod-like aggregates were formed when using dioxane as initial solvent, while spherical micelles were formed using DMF. Elevating pH values from 4 to 5 to 7 and decreasing initial copolymer concentrations from 1.5 wt% to 1.0 wt% to 0.5 wt% were favorable for the formation of well-defined rod-like aggregates. In addition, the bicontinuous rods and lamellae were observed when preparing colloid solutions in appropriate conditions.

Synthesis and Characterization of Poly(isoprene-b-butyl methacrylate) Block Copolymer in the Presence of Rare Earth Catalyst

ＩｎｔｒｏｄｕｃｔｉｏｎＢｌｏｃｋｃｏｐｏｌｙｍｅｒｉｚａｔｉｏｎｓｏｆｏｌｅｆｉｎｗｉｔｈａｃｒｙｌａｔｅｓｈａｖｅａｒｏｕｓｅｄｍｏｒｅａｎｄｍｏｒｅａｔｅｎｔｉｏｎｓｓｉｎｃｅｔｈｅｓｅｐｒｏｃｅｓｓｅｓｅｎｄｏｗｐｏｌｙｍｅｒｉｃｍａｔｅｒｉ...

Synthesis and Characterization of ABBA Block Copolymer of Glycolide and ε-Caprolactone

A biodegradable ABBA block copolymer was synthesized via the ring-opening co-polymerization of ~ε-caprolactone(CL, B) and glycolide(A) by means of step polymerization in the presence of ethylene glycol as an initiator and stannous octanoate as a catalyst at 110 ℃ for 48 h. The molecular length of the PCL pre-polymer(BB) could be adjusted by controlling the molar ratio of the ethylene glycol initiator to ε-caprolactone monomer. The structure and the composition of the block copolymer were determined by the weight ratio of the monomer glycolide(A) to PCL pre-polymer(BB). The block copolymers were characterized by ~ 1H NMR, GPC, DSC and X-ray. The results confirm the successful synthesis of an ABBA block copolymer.

CRYSTALLIZATION OF BLENDS OF AN ASYMMETRIC POLY(OXYETHYLENE)-b-POLY(OXYBUTYLENE) BLOCK COPOLYMER WITH POLY(OXYBUTYLENE)

An oxyethylene/oxybutylene block copolymer with asymmetric volume fraction (E115B105) was blended with oxybutylene homopolymer (Bh) at different volume fractions of the block Crystallization behavior of the blends was studied and was compared with that of the blends from a symmetric block copolymer (E114B56). It was found that the crystallization temperature of E115B103/B28 blend is lower than that of the blends from symmetric block copolymer. For the blend with = 0.30 breakout crystallization with an Avrami exponent n 3.0 is observed. At = 0.22 the blend exhibits a variable crystallization behavior: confined crystallization with n 1.0 at lower crystallization temperatures but breakout crystallization at high crystallization temperatures. For the blend with = 0.14 and sphere morphology confined crystallization occurs at all crystallization temperatures studied. When compared with the blends from symmetric block copolymer, confined crystallization occurs more easily in the E115B103/B28 blends. The SAXS results agree with the isothermal crystallization kinetics. Deformation of the confined crystalline block is observed in the blend with =0.14 and mixed lamellar and cylinder morphologies in the blend with = 0.22.

A COMPARATIVE STUDY OF CHAIN DYNAMICS OF DI-AND TRI-BLOCK COPOLYMERS IN SEMIDILUTE SOLUTION IN A NON-SELECTIVE SOLVENT

The chain dynamics of a pair of diblock poly(styrene-b-butadiene) (PS210-b-PB960) and triblock poly(styrene-b-butadiene-b-styrene) (PS200-b-PB1815-b-PS200) copolymers in both dilute and semidilute toluene solutions has been comparatively studied by dynamic laser light scattering. As expected, the mutual diffusion of individual chain changes into a fast cooperative diffusion of the chain segments ('blobs') between two neighboring entanglement points for both the copolymers as the solution changes from dilute to semidilute. Further increases of the concentration lead to a second slow relaxation mode. For the triblock chains, there exists an additional middle relaxation between the fast and the slow modes. The concentration (c) dependent study of the average characteristic decay time of the fast mode ((tau(f))) reveals that 1/(tau(f)) - c(-a) with 0.33 < alpha < 0.44, much smaller than 0.75 predicted or 0.72 observed for linear homopolymer chains in good solvent. It implies that the solvent quality of toluene for PB might not be as good as that for PS. Due to such a difference in solubility, it is reasonable to speculate that the PB and PS blocks are transiently segregated in semidilute solution. The relaxation of these transient PB and PS richer domains leads to the observed slow relaxation. Such a speculation is supported by the appearance of an additional slow relaxation mode in the study of polyisoprene-b-polystyrene-b-polyisoprene in semidilute solution in cyclohexane, a non-selective solvent, in which we alternated the solubility difference by a variation of the solution temperature.