Refractory lipoatrophy treated with autologous whole blood injection:A case report

BACKGROUND Intramuscular corticosteroid injection may cause adverse effects such as dermal and/or subcutaneous atrophy,alopecia,hypopigmentation,and hyperpigmentation.Although cutaneous atrophy can spontaneously resolve,several treatment options have been suggested for this condition.CASE SUMMARY In this paper,we report a case of corticosteroid injection induced lipoatrophy treated with autologous whole blood(AWB)injection,as the condition had been unresponsive to fractional laser therapy.A 29-year-old female patient visited the dermatology clinic complaining of skin depression on her right buttock area,which had appeared six months earlier.There had been only subtle improvement at the margins after fractional CO2 laser treatment;therefore,after obtaining informed consent from the patient,AWB treatment was initiated.One month after the first AWB injection,the size and depth of the lesion had noticeably improved,and a slight improvement was also observed in discoloration.CONCLUSION Close observation is the initial treatment of choice for steroid induced skin atrophy;however,for patients in need of immediate cosmetic improvement,AWB injection may be a safe and cost-effective alternative.

Genomic DNA Isolation by Phenol/Chloroform Extracting Method from Sheep Blood Clot

[ Objective] The aim was to establish the method of extracting genomic DNA from sheep blood clot on the basis of the improvement of method for extracting genomic DNA from tissues. [Method]The genomic DNA with complete primary structure and high purity was obtained from the sheep blood clot after the steps of cutting the sheep blood clot with ophthalmic scissors, cell lysis with tissue DNA extracts and digested by proteinase K, extracting with phenol/chloroform and precipitating with ethanol were performed. [ Result] The concentration of the extracted DNA was 159.90 ±0.70 ng/μl and the ratio of the A260/A280 was 1.80 ＋0.01. The sheep microsatellite locus of BM203 was amplified by using the extracted DNA from the sheep blood clot as template of PCR, and the PCR result was perfect. [Conclusion]This method is simple and feasible, the quantity and quality of the extracted DNA can satisfy the demands for the subsequent researches. It is worth to extending and using for reference.

A HPLC Method for the Determination of Salmon Calcitonin in Injection by Gradient Elution

It was concluded that the described HPLC method could be used for the assayof salmon calcitonin in injection, as it offers qualified selectivity, accuracy and precision ofanalysis.

Flow injection spectrophotometric determination of vitamin E in pharmaceuticals,milk powder and blood serum using potassium ferricyanide-Fe(Ⅲ) detection system

A simple and sensitive flow injection spectrophotometric method is reported for the determination of vitamin E using potassium ferricyanide-Fe(Ⅲ) detection system.In the presence of vitamin E,Fe(Ⅲ)/ferricyanide reduces.The in situ reduced ions are then reacted with unreduced portion of ferricyanide/Fe(Ⅲ) to make soluble Prussian blue,which is monitored at absorption wavelength of 735 nm.Linear calibration graph was obtained in the concentration range of 0.1-40μg mL^(-1).The relative standard deviations (n=4) were in the range of 1.1-3.6%,with limits of detection(3 s blank) of 0.04μg mL^(-1).The proposed method allowed 12 injections h^(-1).The method is applied to determine vitamin E in pharmaceuticals,infant milk and blood serum samples using hexane extraction with the recoveries in the range of 93±3 to 97.5±4%.The method is validated using certified reference materials SRM 968c for blood serum samples.

Simulation of Non-isothermal Injection Molding for a Non-Newtonian Fluid by Level Set Method

A non-isothermal injection molding process for a non-Newtonian viscous pseudoplastic fluid is simulated.A conservative interface capturing technique and the flow field solving method are coupled to perform a dynamic simulation.The validity of the numerical method is verified by a benchmark problem.The melt interface evolution versus time is captured and the physical quantities such as temperature,velocity and pressure at each time step are obtained with corresponding analysis.A"frozen skin"layer with the thickness increasing versus time during the injection process is found.The fact that the"frozen skin"layer can be reduced by increasing the injection velocity is numerically verified.The fountain flow phenomenon near the melt interface is also captured.Moreover,comparisons with the non-isothermal Newtonian case show that the curvatures of the interface arcs and the pressure contours near the horizontal mid-line of the cavity for the non-Newtonian pseudoplastic case is larger than that for the Newtonian case.The velocity profiles are different at different positions for the non-Newtonian pseudoplastic case,while in the case of Newtonian flow the velocity profiles are parabolic and almost the same at different positions.

Study on the packed volume and the void ratio of idealized human red blood cells using a ?nite-discrete element method

Numerical simulations are performed to examine the packing behavior of human red blood cells(RBCs). A combined ?nite-discrete element method(FDEM) is utilized, in which the RBCs are modeled as no-friction and no-adhesion solid bodies. The packed volume and the void ratio of a large number of randomly packed RBCs are clari?ed,and the effects of the RBC shape, the mesh size, the cell number, and the container size are investigated. The results show that the packed human RBCs with normal shape have a void ratio of 28.45%, which is slightly higher than that of the ?at or thick cells used in this study. Such information is bene?cial to the further understanding on the geometric features of human RBCs and the research on RBC simulations.

A fast explicit finite difference method for determination of wellhead injection pressure

A fast explicit finite difference method (FEFDM),derived from the differential equations of one-dimensional steady pipe flow,was presented for calculation of wellhead injection pressure.Recalculation with a traditional numerical method of the same equations corroborates well the reliability and rate of FEFDM.Moreover,a flow rate estimate method was developed for the project whose injection rate has not been clearly determined.A wellhead pressure regime determined by this method was successfully applied to the trial injection operations in Shihezi formation of Shenhua CCS Project,which is a good practice verification of FEFDM.At last,this method was used to evaluate the effect of friction and acceleration terms on the flow equation on the wellhead pressure.The result shows that for deep wellbore,the friction term can be omitted when flow rate is low and in a wide range of velocity the acceleration term can always be deleted.It is also shown that with flow rate increasing,the friction term can no longer be neglected.

Numerical Simulation of the Blood Flow through a Brain Vascular Aneurysm with an Artificial Stent Using the SPH Method

We present numerical simulations of blood flow through a brain vascular aneurysm with an artificial stent using Smoothed Particle Hydrodynamics (SPH). The aim of this work is to analyze how the flow into an aneurysm changes using different stent configurations. The initial conditions for the simulations were constructed from angiographic images of a real patient with an aneurysm. The wall shear stresses, pressure and highest velocity within the artery, and other particular quantities are calculated which are of medical specific interest. The numerical simulations of the cerebral circulation help doctors to determine if the patient’s own vascular anatomy has the conditions to allow arterial stenting by endovascular method before the surgery or even evaluate the effect of different stent structure and materials. The results show that the flow downstream the aneurysm is highly modified by the stent configuration and that the best choice for reducing the flow in the aneurysm is to use a completely extended Endeavor stent.

New approach to develop a 3D non-isothermal computational framework for injection molding process based on level set method

The simulation of three-dimensional （3D） non-isothermal, non-Newtonian fluid filling process is an extremely difficult task and remains a challenging problem, which includes polymer melt flow with free surface coupled with transient heat transfer. This paper presents a full 3D non-isothermal two-phase flow model to predict the complex flow in melt filling process, where the Cross-WLF model is applied to characterize the rheological behav- ior of polymer melt. The governing equations are solved using finite volume method with SIMPLEC algorithm on collocated grids and the melt front is accurately captured by a high resolution level set method. A domain exten- sion technique is adopted to deal with the complex cavities, which greatly reduces the computational burden. To verify the validity of the developed 3D approach, the melts filling processes in two thin rectangular cavities （one of them with a cylindrical insert） are simulated. The predicted melt front interfaces are in good agreement with the experiment and commercial software prediction. For a case with a rather complex cavity, the dynamic filling process in a hemispherical shell is successfully simulated. All of the numerical results show that the developed numerical procedure can provide a reasonable orediction for injection molding process.

Oil oxidation in the whole temperature regions during oil reservoir air injection and development methods

The oil oxidation characteristics of the whole temperature regions from 30 ℃ to 600 ℃ during oil reservoir air injection were revealed by experiments. The whole oil oxidation temperature regions were divided into four different parts: dissolving and inflation region, low temperature oxidation region, medium temperature oxidation region and high temperature oxidation region. The reaction mechanisms of different regions were explained. Based on the oil oxidation characteristics and filed tests results, light oil reservoirs air injection development methods were divided into two types: oxygen-reducing air flooding and air flooding;heavy oil reservoirs air injection in-situ combustion development methods were divided into two types: medium temperature in-situ combustion and high temperature in-situ combustion. When the reservoir temperature is lower than 120 ℃, oxygen-reducing air flooding should be used for light oil reservoir development. When the reservoir temperature is higher than 120 ℃, air flooding method should be used for light oil reservoir development. For a normal heavy oil reservoir, when the combustion front temperature is lower than 400 ℃, the development method is medium temperature in-situ combustion. For a heavy oil reservoir with high oil resin and asphalting contents, when the combustion front temperature is higher than 450 ℃, the development method at this condition is high temperature in-situ combustion. Ten years field tests of air injection carried out by PetroChina proved that air has advantages in technical, economical and gas source aspects compared with other gas agents for oilfield gas injection development. Air injection development can be used in low/super-low permeability light oil reservoirs, medium and high permeability light oil reservoirs and heavy oil reservoirs. Air is a very promising gas flooding agent.

A Clinical Study of Safflower Yellow Injection in Treating Coronary Heart Disease Angina Pectoris with Xin-Blood Stagnation Syndrome

Objective： To evaluate the clinical effect and safety of Safflower Yellow injection （SYI） in treating coronary heart disease angina pectoris （OHD-AP） with Xin-blood stagnation syndrome （XBSS）. Methods： Adopted was the multi-centered, randomized, positive parallel controlled method, 448 patients with CHD-AP-XBSS were enrolled and divided into two groups, 336 in the tested group treated with SYI and 112 in the control group treated with Salvia injection by intravenous dripping once a day for 14 days, so as to observe the conditions of angina, electrocardiogram, and therapeutic effect on traditinal Chinese medicine （TCM） symptoms as well as the safety of the treatment. Results： The significantly effective rate and total effective rate in the tested group were 60.06% （194/323） and 91.02 % （294/323） respectively; those in improvement of TOM symptoms were 40. 18% （129/321） and 75.23% （243/323） respectively, which were better than those in the control group （P〈0.01）. Conclusion： SYI Injection is effective and safe in treating OHD-AP-XBSS.

Power System State Estimation Solution With Zero Injection Constraints Using Modified Newton Method and Fast Decoupled Method in Polar Coordinate

如何保证零注入节点的注入功率在状态估计结果中严格为0是电力系统状态估计研究中的重要问题。在直角坐标下,由于零注入约束为线性约束,可使用修正牛顿法来有效地解决这一问题。因此,借鉴直角坐标下修正牛顿法的思路,提出了极坐标下的修正牛顿法和修正快速解耦估计。这些方法的计算流程与传统的极坐标下的牛顿法和快速解耦估计非常相似,计算速度与大权重法相当,同时能够保证零注入约束严格满足。仿真结果验证了所得结论。

Application of Dynamic Linear Detecting Method in Data Processing of the Portable Blood Sugar Analyzer

In this paper,a dynamic linear detecting method,that the non-linear coefficient NL% was led and the non-linearity of data were estimated continuously and dynamically and determined when NL% exceeded reference value (5%),was used for data processing and could solve the problem caused by the phenomenon of substrate depleting occurred following the redox reaction in portable blood sugar analyzer.By contrast to the conventional end-point method,the dynamic linear detecting method is based on multipoint data collecting.Experiments of measuring the calibration glucose solution with 8 various concentrations from 50 mg/dl to 400 mg/dl were carried out with the analyzer developed by our group.The linear regression curve,whose correlation for the data was 0.9995 and the residual was 2.8080,were obtained.The obtained correlation,residual, and the computation workload are all fit for the portable blood sugar analyzer.

Investigation of third-grade non-Newtonian blood flow in arteries under periodic body acceleration using multi-step differential transformation method

In this paper, a non-Newtonian third-grade blood in coronary and femoral arteries is simulated analytically and numerically. The blood is considered as the third- grade non-Newtonian fluid under the periodic body acceleration motion and the pulsatile pressure gradient. The hybrid multi-step differential transformation method （Hybrid-Ms- DTM） and the Crank-Nicholson method （CNM） are used to solve the partial differential equation （PDE）, and a good agreement between them is observed in the results. The effects of the some physical parameters such as the amplitude, the lead angle, and the body acceleration frequency on the velocity and shear stress profiles are considered. The results show that increasing the amplitude, Ag, and reducing the lead angle of body acceleration, 9, make higher velocity profiles on the center line of both arteries. Also, the maximum wall shear stress increases when Ag increases.

Psychological problems related to capillary blood glucose testing and insulin injection among diabetes patients

Objective:This review is aimed at explaining the psychological problems related to capillary blood glucose(CBG)testing and insulin injection,as well as recommending essential strategies to solve the fear thereof.Methods:Databases,including PubMed,Cumulative Index of Nursing and Allied Health Literature(CINAHL),Scopus,and Google Scholar,were searched to extract the relevant articles.Initially,the terms used to retrieve related studies were"fear of blood glucose monitoring","anxiety capillary blood glucose testing and insulin injection","psychological problems on blood glucose monitoring and insulin injection","diabetes management",and"diabetes mellitus".Results:Results showed that the psychological problems related to CBG testing and insulin injection were associated with the stress and depression experienced during diabetes self-monitoring of blood glucose.This psychological issue has its impacts such as nonadherence to medication as well as a lack of self-discipline in terms of CBG testing and insulin injection.Inadequate information,inappropriate perception,and pain/discomfort during pricking of fingers were the main reasons for the psychological issues in CBG testing and self-injection of insulin.Conclusions:The expected benefits of this review include the explanation of the issues related to the psychological problems in CBG testing and insulin injection among type 2 diabetes mellitus(T2DM)patients.This review article also provides the recommendations on providing counseling and empowering the patients on CBG monitoring and insulin injection.Moreover,family members should provide psychological support to reduce fear,anxiety,and distress arising from CBG testing and insulin injection.

Single Phase-to-Ground Fault Line Identification and Section Location Method for Non-Effectively Grounded Distribution Systems Based on Signal Injection

A diagnostic signal current trace detecting based single phase-to-ground fault line identifica- tion and section location method for non-effectively grounded distribution systems is presented in this paper.A special diagnostic signal current is injected into the fault distribution system,and then it is detected at the outlet terminals to identify the fault line and at the sectionalizing or branching point along the fault line to locate the fault section.The method has been put into application in actual distribution network and field experience shows that it can identify the fault line and locate the fault section correctly and effectively.

Clinical Study on Application of Xinrun Tongluo Method Based on the Theory of Collateral Diseases in Treating Androgenic Baldness of Blood Heat Wind Dryness Syndrome

[Objectives]To explore the intervention effect of the representative formula of Xinrun Tongluo method,Liangxue Xiaofeng Powder,on the incidence of androgenic alopecia in the syndrome of blood heat and wind dryness.[Methods]A total of 72 patients with androgenic alopecia in Suzhou TCM Hospital Affiliated to Nanjing University of Chinese Medicine from October,2022 to June,2023 were randomly divided into a control group(36 cases,treated with Western medicine)and a treatment group(36 cases,treated with Chinese herbal formula+Western medicine).The short-term and long-term efficacy of the two groups of patients was compared.[Results]The hair microscopic signs and short-term and long-term efficacy of the treatment group were significantly better than those of the control group before and after treatment,with a statistically significant difference(P<0.05).[Conclusions]The representative formula of Xinrun Tongluo method is Liangxue Xiaofeng Powder,which has better clinical efficacy as an auxiliary Western medicine in the treatment of androgenic alopecia patients with blood heat and wind dryness syndrome,and is worthy of further promotion and application in clinical practice.

Fever glove hand-shake method safe blood collection from children's fingertips in COVID-19 fever clinic

BACKGROUND During the coronavirus disease 2019(COVID-19)epidemic,the fever clinic is an important link for screening and diagnosing whether a patient is infected with the novel coronavirus.Blood collection from children’s fingertips is a commonly used detection method;however,in children,the blood collection process may cause discomfort and resistance.To address this problem,the use of heating gloves combined with hand swinging can be considered for fingertip blood collection in children.AIM To explore the application of fever gloves with the handshaking method for fingertip blood collection from children in fever clinics during the COVID-19 epidemic.METHODS A total of 100 children were selected for fingertip blood collection at the fever clinic of our hospital from June 2022 to June 2023 and were divided into two groups using a randomized numerical table method,with 50 cases in each group,including the control and observation groups.The patients in the control group followed the doctor's instructions to cooperate with the routine fingertip blood collection method,and the patients in the observation group followed the doctor's instructions to cooperate with the static fever gloves with the shaking hands method of children's fingertip blood collection.The level of the six blood routine and collection indexes,and the satisfaction of the examination of the patients in the peripheral blood group and the fever gloves with the shaking hands method of the children's fingertip blood collection group were compared.RESULTS The red and white blood cell count,hemoglobin,and red blood cell pressure volume in the observation group were higher than those in the control group(P<0.05);the platelet count in the control group was lower than that in the observation group(P<0.05);the number of times of squeezing the fingertip,the average time of blood collection,and the score of puncture pain in the observation group were significantly better than those in the control group(P<0.05);and satisfaction with the routine blood examination in the observation group was greater than that in the control group.CONCLUSION The application value of the fever gloves with shaking hands method for children's fingertip blood collection was better,the accuracy of examination indexes was higher,and patient satisfaction with the examination was greater.

Effect of Salvia Miltiorrhiza Injection on Blood Pressure and Cardiac Function in Rats with Gestational Hypertension and Preeclampsia

Objective: This study is to observe the effects of Salvia miltiorrhiza injection on blood pressure and cardiac function in rats with pregnancy-induced hypertension and preeclampsia. Methodology: Syncytiotrophoblast microvilli (stbm) and l-arginine nitrosyl methyl ester were screened out via caudal vein injection. Twenty gestational hypertension-preeclampsia model SD (Sprague Dawley) rats successfully induced by L-NAME (L-arginine Nitrosyl methyl ester) were randomly divided into 2 groups (model group and Danshen injection group, n = 10). Then another 10 normal pregnant SD rats without model were selected as blank control group. The Salvia miltiorrhiza injection group was given Salvia miltiorrhiza injection (0.5 g?kg?1?d?1) through tail vein, and the control group and model group were given equal volume of normal saline through tail vein injection. All three groups were treated by tail vein injection once a day (d) for 7 days. After treatment, heart rate (HR), Systolic pressure (SP), diastolic pressure (DP) and mean arterial pressure (MAP) were measured by tail artery. Left ventricular end-diastolic diameter (LVDd) and Left ventricular end systolic diameter (LVDs) were recorded by echocardiography. Left ventricular end diastolic pressure (LVEDP), left ventricular systolic pressure (LVSP), left ventricular ejection fraction (left ventricular ejection) fraction, LVEF) and the maximum rate of increase/decrease of left ventricular pressure during isovolemic systole (+dp/dtmax/?dp/dtmax);Endothelin-1 (ET-1) levels in rat tail vein blood were detected by ELISA. Results: SP, DP, MP, HR, LVSP, LVDs and ?dp/dtmaxx were all decreased, plasma ET-1 expression was low, and LVDd, LVEDP, LVEF, and +dp/dtmax were all increased in the Salvia miltiorroot injection group, with statistical significance compared to the model group (p Conclusion: Salvia miltiorrhiza injection can improve the cardiac function and reduce blood pressure in rats with pregnancy-induced hypertension and preeclampsia, and the mechanism may be related to alleviating systemic arteriolar spasm by regulating ET-1 level.

Monte Carlo simulation based thinning and calculating method for noninvasive blood glucose sensing by near-infrared spectroscopy

Previous results show that the floating reference theory(FRT)is an effective tool to reduce the infuence of interference factors on noninvasive blood glucose sensing by near infrared spectros-copy(NIRS).It is the key to measure the floating reference point(FRP)precisely for the application of FRT.Monte Carlo(MC)simulation has been introduced to quantitatively in-vestigate the effects of positioning errors and light source drifts on measuring FRP.In this article,thinning and calculating method(TCM)is proposed to quantify the positioning error.Mean-while,the normalization process(NP)is developed to significantly reduce the error induced by light source drift.The results according to TCM show that 7 purm deviations in positioning can generate about 10.63%relative error in FRP.It is more noticeable that 1%fluctuation in light source intensity may lead to 12.21%relative errors.Gratifyingly,the proposed NP model can effectively reduce the error caused by light source drift.Therefore,the measurement system for FRPs must meet that the positioning error is less than 7 purm,and the light source drift is kept within 1%.Furthermore,an improvement for measurement system is proposed in order to take advantage of the NP model.