Research on the Pragmatics of Politeness Principle of Bulletin Board System based on the Differences of Gender and Habits

In this paper, we conduct research on the pragmatics of politeness principle of bulletin board system based on the differences of gender and habits. The openness of the Internet makes all kinds of information received into the vision of an equal chance and web sites in order to improve the hit rate which causes the traffic of commercial purposes such as tabloidization tend to be more negative news spread. To strengthen the research of network language management strategy, it has very important theoretical significance and practical meaning analyzed. Our proposed methodology will help researchers to understand the approaches to use the pragrnatics of politeness.

Hybrid and dependent task scheduling algorithm for on-board system software

In order to solve the hybrid and dependent task scheduling and critical source allocation problems, a task scheduling algorithm has been developed by first presenting the tasks, and then describing the hybrid and dependent scheduling algorithm and deriving the predictable schedulability condition. The performance of this agorithm was evaluated through simulation, and it is concluded from the evaluation results that the hybrid task scheduling subalgorithm based on the comparison factor can be used to solve the problem of aperiodic task being blocked by periodic task in the traditional operating system for a very long time, which results in poor scheduling predictability; and the resource allocation subalgorithm based on schedulability analysis can be used to solve the problems of critical section conflict, ceiling blocking and priority inversion; and the scheduling algorithm is nearest optimal when the abortable critical section is 0.6.

Internet of Things Supported Airport Boarding System and Evaluation with Fuzzy

The existing systems sustained with the investments made require more automation and digital transformation with the continuous advancement of tech-nology.The aviation industry is a sector that is open to more automation and digi-tal transformation,mainly because of the intense competition and the analysis of a large variety of data.The long duration of operations in current airline processes and some processflows cause customer dissatisfaction and cost increase.In this study,the boarding process,which is one of the operational processes of airline transportation and is open to improvement,was discussed.The classical boarding process has been redesigned using Internet of Things technology a model called Boarding 4.0 was created.With Boarding 4.0,it is aimed to design a process where passengers can take their time before boarding more efficiently.In the study,the sub-processes of the Boarding 4.0 model,other processes that the sub-processes interact with,their activities,and data exchange passenger move-ments during the activities are explained in detail.Compared to the classical boarding process and Boarding 4.0 with the fuzzy ahp technique,it has been shown that boarding 4.0 is more advantageous and passenger movement times can be reduced during boarding.As a result of the evaluation made with the fuzzy ahp,it was determined that boarding 4.0 is more advantageous than the classical boarding process.In addition,when the total time of the sub-activities in the board-ing process is calculated,boarding activities for a passenger take 50 min with the classic boarding process and 20 min with Boarding 4.0.Thus,when Boarding 4.0 is used,the passenger gains 30 min.Furthermore,when the calculation is made concerning the airport’s current capacity,two passengers are hosted with the clas-sical boarding process,whilefive passengers are hosted with Boarding 4.0.This acquisition is significant for airports in terms of efficient use of resources.

Experimental and numerical study regarding H-steel all-bolted connection steel frame with composite wall boards

H-steel all-bolted connection steel frame structures with heat preservation and decoration composite wall boards were investigated and the seismic performances of three scaled specimens were studied.The failure modes,hysteresis curves,bearing capacity,ductility,energy dissipation capacity,stiffness degradation and strain distribution were discussed.The calculation method of structural theoretical internal force was presented.The results showed that the overall structural seismic performance was better,and the structural ductility met the demands of elastic-plastic inter-story drift angle for seismic design.The H-steel weak-axis connection structure obtained better energy dissipation capacity,and its bearing capacity and stiffness were slightly different from the strong-axis connection.The heat preservation and decoration performance of composite wallboard and the all-bolted connection of the steel frame realized prefabrication during the whole construction period.The plastic hinge of the steel beam can be moved outwards because of the L-angles,which effectively avoids stress concentration in joint areas and expands the plastic hinge range.The errors between the theoretical structural capacity calculated by the plastic analysis method and the test results were within 2.44%.In addition,structural failure mechanisms and bearing capacities were verified by the finite element(FE)analysis,and the effects of the main parameters on the structures were investigated.The FE verification results were the same as in the test.The research results provide theoretical support and technical guidance for the application of thermal insulation and decorative composite wall panels in H-shaped steel all-bolted steel frames.

Effect of Low pH on Forming Process of Desulfurization Gypsum Composite Boards Strengthened by Melamine-formaldehyde Resin

Through exploring the effects of low pH on the composite system of desulfurization gypsum(DG)enhanced by melamine-formaldehyde resin(MF),it is found that the inducing of sulfate-ion,in contrast to chloride and oxalate ions,favors the longitudinal growth of the crystalline form of the hydration product,which was relatively simple and had the highest length to width(L/D)ratio.At the same time,MF can also improve L/D ratio of gypsum hydration products,which favors the formation of hydrated whiskers.Finally,in a composite system composed of hemihydrate gypsum,MF,and glass fibers,when dilute sulfuric acid was used to regulate pH=3-4,the tight binding formed among the components of the composite system compared to pH=5-6.The hydration product of gypsum adheres tightly to glass fiber surface and produces a good cross-linking and binding effect with MF.The flexural strength,compressive strength,elastic modulus,and water absorption of the desulphurized gypsum composite board is 22.7 MPa,39.8 MPa,5608 MPa,and 1.8%,respectively.

Protective benefits of HDPE board sand fences in an environment with variable wind directions on Gobi surfaces:wind tunnel study

The Golmud-Korla Railway in the Gobi area faces operational challenges due to sand hazards,caused by strong and variable winds.This study addresses these challenges by conducting wind tunnel tests to evaluate the protective benefits of High Density Polyethylene(HDPE)board sand fences,focusing on their orientation relative to various wind directions(referred to as'wind angle').This study found that the size of the low-velocity zone on the leeward side of the sand fences(LSF)expanded with an increase in the wind angle(WA).At 1H(the height of the sand fence)and 2H positions on the LSF,the wind speed profiles(WSP)exhibited a segmented logarithmic growth,constrained by Z=H at varying WAs.The efficacy of the sand fence in obstructing airflow escalated as WA increased.The size of the WA has a significant impact on the protective efficiency of HDPE board sand fences.Furthermore,compared to typical sandy surfaces,the rate of sand transport across the Gobi surface diminishes more slowly with height,attributed to the gravel's rebound effect.This phenomenon allows some sand particles to bypass the fences,rendering them less effective at blocking wind and trapping sand than in sandy environments.This paper offers scientific evidence supporting the practical use and enhancement of HDPE board sand fences in varied wind conditions.

Protective benefit of folded linear HDPE board sand fences along the Golmud-Korla Railway,China:Field observation and wind tunnel study

The Milan Gobi area of the Golmud-Korla Railway in northwest China is located in the lower dispersal area of the mountain pass and has strong winds with evident double wind direction characteristics.This study introduced a novel sand fence deployment technique,termed‘folded linear deployment',designed to position the sand fence orthogonally to the two predominant wind directions for optimal protection.This study used wind tunnel and field tests to evaluate the wind and sand flow characteristics,as well as the windproof and sandresistant performance of folded linear HDPE(Highdensity polyethylene)board sand fences.The results suggest that the airflow around the fence creates clear zoning characteristics.The deceleration area on the BSF(backwind side of the sand fence)is much larger than that on the DSF(downwind side of the sand fence).Thus,sand particles are primarily deposited on the BSF.At different wind speeds,the airflow at 2 and 5 h on the DSF is not disturbed.The WSP(wind speed profile)presents a logarithmic distribution.The airflow is disturbed at 1-20 h on the BSF,and the WSP gradually deviates from the logarithmic law.However,as the airflow moves away from the fence,the WSP gradually approaches a logarithmic distribution.Meanwhile,the WPE(windproof efficiency)and SRE(sand-resistant efficiency)of the sand fence exceed 80%.In addition,the results of wind tunnel tests are compared with those of field tests.The overall dispersion is good,and the best dispersion is found at z/H=2.00,indicating good agreement between the two test results.This study provides a scientific basis for the design of sand hazard control measures,similar to the railway project in the Gobi Gale area.

Women on Boards of Directors

This research aims to measure the current gender representation in membership of boards of directors,and to study the factors affecting the presence of women on boards.The results of the study will support the decision makers and policy makers at all levels by providing knowledge that contributes to bridging the current gap in participation of women boards.The methodology used in this research is the descriptive analytical approach,which relies on quantitative methods in the process of collecting and analyzing data.This study represents the boards of directors in the three sectors(public,private,and non-profit)in the Kingdom of Saudi Arabia,The study sample contained 350 targets,where a random sample of 150 people in the public sector,100 people in the private sector,and 100 people in the non-profit sector were selected.The research result found that the majority of the responses believe that the lack of experience and training,and social factors,are the most impact areas of explaining the reasons for the existence of a gap in women’s membership in boards of directors in the three sectors.And the most important reasons for the existence of a gender gap in board membership are:there is no statutory minimum percentage for women’s representation on boards of directors,and scarcity of female competencies in general,and the lack of women occupying leadership positions.

BOB(Bosa On Board)设计研究

采用bosa on board的方式,将光通信电路直接铺设在PCB板上,替代传统的光模块独立器件,实现GPON/EPON产品的低成本高性能。

Development and Characterization of Particle Boards Based on Sorghum Husk

This study tackles current environmental challenges by developing innovative and eco-friendly particle boards utilizing sorghum husk, combined with recycled expanded polystyrene (EPS). This dual eco-responsible approach valorizes sorghum husk, often deemed agricultural waste, and repurposes EPS, a plastic waste, thus contributing to CO2 emission reduction and effective waste management. The manufacturing process involves dissolving recycled polystyrene within a solvent to create a binder, which is then mixed with sorghum husk and cold-pressed into composite boards. The study explores the impact of two particle sizes (fine and coarse) and two different concentrations of the recycled EPS binder. Results demonstrate significant variations in the boards’ mechanical properties, displaying a range of Modulus of Rupture (MOR) from 0.84 MPa to 3.85 MPa, and Modulus of Elasticity (MOE) spanning from 658.13 MPa to 1313.25 MPa, influenced by the binder concentration and particle size. These characteristics suggest that the boards can be effectively used in various construction applications, including interior decoration, false ceilings, and potentially for furniture and door manufacturing when combined with appropriate coatings. This study not only exemplifies the valorization of plastic and agricultural wastes but also offers a practical, localized solution to global climate change challenges by promoting sustainable construction materials.

Weatherability Studies on External Insulation Thermal System of Expanded Polystyrene Board,Polystyrene Granule and Polyurethane Foam

Atmospheric exposure tests including two experimental stages of high temperature-spraying water cycle and heating-refrigeration cycle were carried out on three currently used ETIS of expanded polystyrene（EPS） board,polystyrene granule mortar and polyurethane foam in order to study the weatherablility of external thermal insulation system（ETIS）.The change rules of adhesive strength were hereby studied at different time period of atmospheric exposure tests.The experimental results show that the adhesive strength of three kinds of ETIS changes a little during high temperature-spraying water cycle,but the adhesive strength of ETIS with EPS board decreases significantly after heating-refrigeration cycle.The lowering rate of adhesive strength with painting finishes is obviously faster than that of tile finishes for ETIS of EPS board during heating-refrigeration cycle.The weatherability of ETIS with EPS board is worse than the other two,and ETIS of polystyrene granule mortar and polyurethane foam are more suitable than ETIS of EPS board in cold area.

A Research on the Flow Characteristics of a Splitter-Based Water Cooling System for Computer Boards

The splitter is an important component of water-based cooling systems used to extract heat from computer boards.In the present study,the flow characteristics of a 16-splitter structure were numerically simulated and compared with experimental results to verify the reliability of the numerical simulation method.Accordingly,the concept of splitter structural coefficients was proposed.Based on the results of this study,we recommend a selection range of 5≤k≤6 for the structure factor k of the splitter;after optimization,the maximum deviation of the splitter outlet flow was reduced from the original value of 100%to 8.3%.

Sandwich structured ultra-strong-heat-shielding aerogel/copper composite insulation board for safe lithium-ion batteries modules

The fire hazard of lithium-ion batteries(LIBs)modules is extremely serious due to their high capacity.Moreover,once a battery catches fire,it can easily result in a fire of the entire LIBs modules.In this work,a sandwich structure composite thermal insulation(STI)board(copper//silica dioxide aerogel//copper)with the advantages of low thermal conductivity(0.031 W m-1K-1),low surface radiation emissivity(0.1)and good thermal convection inhibition effect has been designed.The thermal runaway(TR)occurrence time of adjacent LIBs increases from 1384 s to more than 6 h+due to the protection of STI board.No TR propagation occurs within LIBs modules with protect of a STI board when a battery catches fire.The ultra-strong-heat-shielding mechanism of STI board has been revealed.The TR propagation of LIBs modules has been insulated effectively by STI board through reducing the heat transfer of convection,conduction and radiation.The air flow rate between the heater and LIBs and radiant heat absorbed by LIBs decrease by 63.5%and 35.1%with protection of STI board,respectively.A high temperature difference inside the STI board is also formed.This work provides direction for the designing of safe thermal insulation board for LIBs modules.

Experimental study of polyurea-coated fiber-reinforced cement boards under gas explosions

Five types of polyurea elastomers were synthesized by changing the isocyanate component and the mechanical properties of polyurea materials were measured. Fiber-reinforced cement boards(FRCB)strengthened by polyurea with different formulations were processed, and a series of experiments were carried out on the specimens with gas explosion devices. The results showed that the conventional mechanical properties of different types of polyureas had their own advantages. Based on the gas explosion overpressure criterion, the blast resistances of reinforced plates were quantitatively evaluated,and the best polyurea was selected to guide the formulation design. The three typical failure modes of polyurea-reinforced FRCBs were flexural, shear, and flexural-shear failure. Dynamic thermodynamics and shock wave spectral analysis revealed that the polyurea did not undergo a glass transition in the gas explosion tests but retained its elastic properties, allowing it to effectively wrap the fragments formed by the brittle substrates.

Editorial board publication strategy and acceptance rates in Turkish national journals

Purpose: This study takes advantage of newly released journal metrics to investigate whether local journals with more qualified boards have lower acceptance rates, based on data from 219 Turkish national journals and 2,367 editorial board members.Design/methodology/approach: This study argues that journal editors can signal their scholarly quality by publishing in reputable journals. Conversely, editors publishing inside articles in affiliated national journals would send negative signals. The research predicts that high(low) quality editorial boards will conduct more(less) selective evaluation and their journals will have lower(higher) acceptance rates. Based on the publication strategy of editors, four measures of board quality are defined: Number of board inside publications per editor(INSIDER), number of board Social Sciences Citation Index publications per editor(SSCI), inside-to-SSCI article ratio(ISRA), and board citation per editor(CITATION). Predictions are tested by correlation and regression analysis.Findings: Low-quality board proxies(INSIDER, ISRA) are positively, and high-quality board proxies(SSCI, CITATION) are negatively associated with acceptance rates. Further, we find that receiving a larger number of submissions, greater women representation on boards, and Web of Science and Scopus(WOSS) coverage are associated with lower acceptance rates. Acceptance rates for journals range from 12% to 91%, with an average of 54% and a median of 53%. Law journals have significantly higher average acceptance rate(68%) than other journals, while WOSS journals have the lowest(43%). Findings indicate some of the highest acceptance rates in Social Sciences literature, including competitive Business and Economics journals that traditionally have low acceptance rates. Limitations: Research relies on local context to define publication strategy of editors. Findings may not be generalizable to mainstream journals and core science countries where emphasis on research quality is stronger and editorial selection is based on scientific merit.Practical implications: Results offer useful insights into editorial management of national journals and allow us to make sense of local editorial practices. The importance of scientific merit for selection to national journal editorial boards is particularly highlighted for sound editorial evaluation of submitted manuscripts.Originality/value: This is the first attempt to document a significant relation between acceptance rates and editorial board publication behavior.

Optimal energy saving in DC railway system withon-board energy storage system by using peak demand cutting strategy

A problem of peak power in DC-electrified railway systems is mainly caused by train power demand during acceleration.If this power is reduced,substation peak power will be significantly decreased.This paper presents a study on optimal energy saving in DC-electrified railway with on-board energy storage system(OBESS) by using peak demand cutting strategy under different trip time controls.The proposed strategy uses OBESS to store recovered braking energy and find an appropriated time to deliver the stored energy back to the power network in such a way that peak power of every substations is reduced.Bangkok Mass Transit System(BTS)-Silom Line in Thailand is used to test and verify the proposed strategy.The results show that substation peak power is reduced by63.49% and net energy consumption is reduced by 15.56%using coasting and deceleration trip time control.

Board Members Oversight System- A Polish Example

The goal of the study was the development of a system to monitor the members of supervisory and management boards. The system currently covers 8,454 joint stock companies registered in Poland. The main purpose of the system is to monitor every change in the composition of every board of every joint stock company, from March 2001 up to the present, and it is updated every month. This system, however, also enables us to confirm some of the theories from the field of corporate governance. A generation change has been identified in the boards of the joint stock companies which were examined. Women constitute a large, and continuously increasing, section of the board members. The number of family companies, and of family involvement in boards, is still increasing. Board members of financial institutions （and not just of banks） possess significantly more directorates than board members of non-financial institutions. The number of interlocking directorates is positively linked to the macroeconomic development indicator of the total investment as percentage of GDP for Poland.

Decision-Making Process in Japanese Board Room. Audit ＆ Supervisory Board as a Source of Information to Outside Board Members： A Systematic Review

I the context of the Corporate Governance Code enactment in Japan, we examine how newly introduced outside directors in Japanese boards obtain information to take part in the decision-making process. We conducted a systematic review of the literature and found 18 peer-reviewed publications in a time span between 2000 and 2016 that described the asymmetry of information between the insider group of board directors （including the CEO） and the outside board members. Our fmdings show that for the course of more than a decade, despite all changes and reforms, the role of board directors, whether insiders or outsiders, is still supplementary. They are treated more as advisors than active part in the decision-making process. We reveal different insider sources of information as forming social ties with the CEO and/or inside board directors and collaboration with Audit ＆ Supervisory Board （Kansayaku）, which can help reduce this asymmetry and improve the decision-making process. We assume that it will be easier for the outsiders to establish contacts and form social ties with the Audit ＆ Supervisory Board members because of their unspoken lower status and thus to obtain more information about the company internal affairs and discussions that take place during the informal meetings, where only insiders （including the CEO） are present.

Dosimetric Effects of a Commercial Breast Board Patient Support System

Aim: In prone breast treatments, a carbon fiber support device resides under the contralateral breast. Tangent beams are designed to encompass the treated breast and these often pass through the board at a shallow angle, resulting in significant attenuation. Our planners account for this attenuation by adding field-in-field dose to the deep part of the breast, through the board. Concern was raised about how accurate the treatment delivery is when the inherent uncertainties of patients’ positions are accounted for. Furthermore, transmission measurements are usually carried out perpendicular to the board, a non-clinical situation. The goal of this study is to evaluate the dosimetric effect of the board and the robustness of the plan to positional uncertainty. Materials and Methods: Twenty-two breast patients treated on a commercial prone breast board between 2017 and 2020 were selected for this retrospective study. To evaluate the board’s attenuation, we compared the plans with the board removed from the dose calculation. To quantify the robustness of this technique, we moved the beam isocenter with respect to the patient and board. Results: Our results showed that when the breast board is removed from a plan which was designed to account for the board attenuation, the average point dose increases by 7.48%, with a maximum of 22%. Comparing results with a mixed Analysis of Variance (ANOVA) and a least-square means analysis, our robustness evaluation indicates that anterior shifts at every magnitude (1 mm through 5 mm) make a significant difference in all dose statistics (D95, max, 95% prescription coverage and homogeneity index) investigated. In/out and right/left shifts resulted in an insignificant change in dose statistics. Conclusion: Prone breast boards can add significant dosimetric uncertainty into the treatment delivery process. Accounting for plan robustness in the design of the plan is highly recommended. A prone breast board design with support moved away from the beam path is warranted.

Detection Algorithm of Surface Defect Word on Printed Circuit Board

For Printed Circuit Board(PCB)surface defect detection,traditional detection methods mostly focus on template matching-based reference method and manual detections,which have the disadvantages of low defect detection efficiency,large errors in defect identification and localization,and low versatility of detectionmethods.In order to furthermeet the requirements of high detection accuracy,real-time and interactivity required by the PCB industry in actual production life.In the current work,we improve the Youonly-look-once(YOLOv4)defect detection method to train and detect six types of PCB small target defects.Firstly,the original Cross Stage Partial Darknet53(CSPDarknet53)backbone network is preserved for PCB defect feature information extraction,and secondly,the original multi-layer cascade fusion method is changed to a single-layer feature layer structure to greatly avoid the problem of uneven distribution of priori anchor boxes size in PCB defect detection process.Then,the K-means++clustering method is used to accurately cluster the anchor boxes to obtain the required size requirements for the defect detection,which further improves the recognition and localization of small PCB defects.Finally,the improved YOLOv4 defect detection model is compared and analyzed on PCB dataset with multi-class algorithms.The experimental results show that the average detection accuracy value of the improved defect detection model reaches 99.34%,which has better detection capability,lower leakage rate and false detection rate for PCB defects in comparison with similar defect detection algorithms.