Study on the Distribution of Interlayer in Thick Sandy Braided River under Large Well Spacing—A Case of C Oilfield in Bohai Sea

Using core, logging and other data, combined with field outcrop deposition, this paper studies the sedimentary genetic types and sedimentary stages of thick sandy braided river interlayer in C oilfield, and divides two stages of interlayer and three single-stage braided flow zones. On this basis, geostatistical inversion constrained by logging and discerning River quantitative knowledge base is carried out to predict the distribution range of the main interlayer in the two phases. The production performance test of the blind well and horizontal well shows that the coincidence rate of the prediction results of interlayer with thickness > 1.5 m is 75%. The research shows that the first stage is the main interlayer, mainly composed of mudstone of flood plain origin, with an average thickness of 2.1 m and relatively stable distribution. Based on the interlayer prediction results, the small layer of composite sand body 1 forms a residual oil enrichment area in the high part of the structure due to the wide range of interlayer shielding in the lower part, which is a favorable area for adjusting and tapping potential.

Study on Remaining Oil at High Water Cut Stage of the Offshore Strong Bottom Water Reservoir

C oilfield is a heavy oil field developed by horizontal wells and single sand body in Bohai oilfield. The edge and bottom water of the reservoir is active and the natural energy development mode is adopted. The comprehensive water cut of the oilfield was 95.3%, which had entered the stage of high water cut oil production. Some reservoirs were limited by crude oil viscosity and oil column height. Under the condition of existing development well pattern, some reserves were not produced or the degree of production was low, and the degree of well control was not high, so there is room for tapping the potential of remaining oil. This paper studied the rising law of water ridge of horizontal wells in bottom water reservoir by reservoir engineering method, and guided the infilling limit of horizontal wells in bottom water reservoir. At the same time, combined with the research results of fine reservoir description, the geological model was established, the numerical simulation was carried out, and the distribution law of remaining oil was analyzed. Through this study, we could understand the law of water flooding and remaining oil in the high water cut period of bottom water heavy oil reservoir, so as to provide guidance for the development strategy of this type of reservoir in the high water cut period.