The Stability Analysis of Implants Installed in Osteotomies with Different Types of Controlled Bone Defects

The stability parameters of implants （ITV, ISQ ＆ PTV） according to different sizes of controlled bone defects made in implant osteotomies were analyzed and the correlation among the three kinds of implant stability parameters was tested in this study. 45 tapped screw-type dental implants were inserted in three types of implant osteotomies made in 8 fresh-frozen pig femoral bones： Typel - without coronal bone defect, Type2 - with 3 mm coronal bone defects, and Type3 - with 6 mm coronal bone defects. The insertion torque values, ISQ ＆ PTV of implants were measured and analyzed statistically. It is concluded that the circumferential coronal bone defects statistically influence the primary stability of implants; ITV, ISQ and PTV are suitable and available to detect the peri-implant coronal bone defects in 3 mm increments, and ITV and PTV are more sensitive to coronal cortical bone loss. There was a strong correlation between ITV and ISQ.

Mechanical Experiment for 3D Printing of Titanium Bone Bionic Dental Implants

[Objectives] To explore the flexural strength of 3D printed titanium bone bionic dental implants and provide a scientific basis for the clinical application of 3D printed porous bionic bone dental implants. [Methods] The cone-beam CT( CBCT) image information of 20 premolars extracted by orthodontic requirement was collected,and a new porous bone bionic dental implant was produced using modeling software and 3D printer. The premolars were divided into two groups( A and B). The universal testing machine was used to test the flexural strength of the two groups and the difference in flexural strength between the two groups was compared through statistics. [Results]Twenty 3D printed porous titanium bone bionic implants were accurately produced; the morphology of group A and group B were extremely similar to each other; the average flexural strength of group A was 2 767. 92 N,while the average flexural strength of group B was 778. 77 N,showing that the average flexural strength of group A was significantly higher than that of group B,and the difference was statistically significant( P < 0. 05).[Conclusions]The personalized porous structure root implants produced by 3D printing technology are very similar to the target tooth morphology,and show high accuracy and small error of production. Besides,the flexural strength of 3D printed personalized porous structure root implants can fully meet the requirements of the maximum occlusal force for dental implant restoration. It is expected to provide a scientific basis for clinical application of 3 D printed porous bionic bone tooth implants.

Survival of dental implants in patients with bone dysplasia:A systematic review

Objective:This study used published studies to assess the survival rate of dental implants placed in patients with bone dysplasia of the maxillofacial region.Material and methods:An electronic search without a specified date range was performed using the MEDLINE,PubMed,EMBASE,Web of Science,and Cochrane databases.No gender or age restrictions were applied.Results:Eighteen publications were found that met the study’s criteria,reporting data on 18 patients with bone dysplasia including cleidocranial dysplasia(CDD),fibrous dysplasia(FD),florid cemento-osseous dysplasia(FCOD),and odonto-maxillary segmental dysplasia(SOMD),who received a total of 130 implants,an average of 7.2 implants/patient(range 1 to 16).The mean age of the patients was 36.7 years(range 15 to 70 years).For implants placed in bone dysplasia,the survival rates were 100% for patients with CDD(n=8),FD(n=5),SOMD(n=2),FCOD with implants inserted far from the lesions(n=2)and 0% for dental implants inserted within FCOD(n=1).The mean follow-up was 38.2 months(min 6,max 60).Conclusions:Dental implants placed in patients with dysplastic bone lesions show high survival rates,similar to those in the general population for CDD,FD,and SOMD.For FCOD,the failure rate was 100%.

Concerting magnesium implant degradation facilitates local chemotherapy in tumor-associated bone defect

Effective management of malignant tumor-induced bone defects remains challenging due to severe systemic side effects,substantial tumor recurrence,and long-lasting bone reconstruction post tumor resection.Magnesium and its alloys have recently emerged in clinics as orthopedics implantable metals but mostly restricted to mechanical devices.Here,by deposition of calcium-based bilayer coating on the surface,a Mg-based composite implant platform is developed with tailored degradation characteristics,simultaneously integrated with chemotherapeutic(Taxol)loading capacity.The delicate modulation of Mg degradation occurring in aqueous environment is observed to play dual roles,not only in eliciting desirable osteoinductivity,but allows for modification of tumor microenvironment(TME)owing to the continuous release of degradation products.Specifically,the sustainable H_(2) evolution and Ca^(2+) from the implant is distinguished to cooperate with local Taxol delivery to achieve superior antineoplastic activity through activating Cyt-c pathway to induce mitochondrial dysfunction,which in turn leads to significant tumor-growth inhibition in vivo.In addition,the local chemotherapeutic delivery of the implant minimizes toxicity and side effects,but markedly fosters osteogenesis and bone repair with appropriate structure degradation in rat femoral defect model.Taken together,a promising intraosseous administration strategy with biodegradable Mg-based implants to facilitate tumor-associated bone defect is proposed.

Surface demineralized freeze-dried bone allograft followed by reimplantation in a failed mandibular dental implant

The removal of a failed implant with high torque causes significant damage to the surrounding tissue,compromising bone regeneration and subsequent osseointegration in the defect area.Here,we report a case of carrier screw fracture followed by immediate implant removal,bone grafting and delayed reimplantation.A dental implant with a fractured central carrier screw was removed using the bur-forceps technique.The resulting three-wall bone defect was filled with granular surface demineralized freeze-dried bone allograft(SD-FDBA).Cone-beam computerized tomography was performed at 1week,6months and 15months postoperatively and standardized for quantitative evaluation.The alveolar bone width and height at 15months post-surgery were about 91%of the original values,with a slightly lower bone density,calculated using the gray value ratio.The graft site was reopened and was found to be completely healed with dense and vascularized bone along with some residual bone graft.Reimplantation followed by restoration was performed 8months later.The quality of regenerated bone following SD-FDBA grafting was adequate for osseointegration and longterm implant success.The excellent osteogenic properties of SD-FDBA are attributed to its human origin,cortical bone-like structure,partly demineralized surfaces and bone morphogenetic protein-2-containing nature.Further investigation with more cases and longer follow-up was required to confirm the final clinical effect.

Three-dimensional-printed individualized porous implants:A new“implant-bone”interface fusion concept for large bone defect treatment

Bone defect repairs are based on bone graft fusion or replacement.Current large bone defect treatments are inadequate and lack of reliable technology.Therefore,we aimed to investigate a simple technique using three-dimensional(3D)-printed individualized porous implants without any bone grafts,osteoinductive agents,or surface biofunctionalization to treat large bone defects,and systematically study its long-term therapeutic effects and osseointegration characteristics.Twenty-six patients with large bone defects caused by tumor,infection,or trauma received treatment with individualized porous implants;among them,three typical cases underwent a detailed study.Additionally,a large segmental femur defect sheep model was used to study the osseointegration characteristics.Immediate and long-term biomechanical stability was achieved,and the animal study revealed that the bone grew into the pores with gradual remodeling,resulting in a long-term mechanically stable implant-bone complex.Advantages of 3D-printed microporous implants for the repair of bone defects included 1)that the stabilization devices were immediately designed and constructed to achieve early postoperative mobility,and 2)that osseointegration between the host bone and implants was achieved without bone grafting.Our osseointegration method,in which the“implant-bone”interface fusion concept was used instead of“bone-bone”fusion,subverts the traditional idea of osseointegration.

Clinical efficacy,bone density,and follow-up in implant and orthodontic treatment for inclined adjacent teeth

BACKGROUND Tooth defects can cause elongation of occlusal teeth,leading to insufficient repair space.The combination of dental implant restoration and orthodontic treatment of oblique adjacent teeth has a significant therapeutic effect.AIM To explore clinical efficacy,bone density,and follow-up of implant and orthodontic treatment for patients with inclined adjacent teeth.METHODS In total,98 patients with oblique adjacent teeth were randomly assigned to implant restoration combined with orthodontic treatment(group A,n=49)or to receive implant restoration alone(group B,n=49).Changes in alveolar ridge bone density and apical bone density were observed before and after treatment in the two groups.Changes in chewing function and language function were compared between the two groups of patients.Follow-up lasted for 12 mo after repair to observe any adverse reactions in the oral cavity.RESULTS The clinical effective rates of group A and group B were 97.96%and 85.71%,respectively,with group A having a higher clinical effective rate than group B.After treatment,the bone density of the alveolar ridge and apical bone in both groups decreased compared to before treatment,while the chewing and language functions improved.The changes in various indicators in group A were more significant.After treatment,the satisfaction rate of group A(97.96%)was higher than that of group B(79.59%).The incidence of adverse reactions in group A(2.04%)was lower than that in group B(24.49%).CONCLUSION The amalgamation of implant restoration and orthodontic treatment for adjacent tilted teeth demonstrates notable clinical efficacy,diminishes alveolar bone resorption,and fosters patient functional rehabilitation while exhibiting negligible adverse reactions.

Workflow and Principles for Precisely Designing a Custom-Made Polyetheretherketone Implant Applied in Irregular Craniofacial Bone Defects

Irregular craniofacial bone defects caused by craniofacial fractures always result in craniofacial bone and contour asymmetry and should therefore be reconstructed.Polyetheretherketone(PEEK)is an ideal substitute for autologous bone grafts and has been widely used in craniofacial bone defect reconstruction.The precise design of custom-made PEEK implants is particularly important to optimise reconstruction.Herein,the workflow and principles for the design and manufacture of PEEK implants are summarised,and a protocol for the precise design of an irregular craniofacial bone defect PEEK implant is presented.According to the method and principles,the design flow was efficient and could be standardised,and design errors could be avoided as much as possible.

A Case Report of Immediate Implant Placement Combined with Flap Surgery,Guided Bone Regeneration and Non-submerged Healing with a Labial Bone Wall Defect in the Esthetic Zone

[Basckground]This case report presented a methodology for immediate implantation in the esthetic zone with a facial bone defect along with flap surgery,guided bone regeneration,and non-submerged healing.[Case presentation]A 27-year-old female patient was complaining of the aesthetic complication that was caused via metallic staining of the neck of ceramic crowns in the maxillary right anterior region for one year.She has experienced immediate implantation along with flap surgery,guided bone regeneration(GBR),and non-submerged healing.The torque of the implant reached to the 35 N·cm to confirm primary stability.Six months after surgery,the healing abutment and the implant were fixed,the gingiva was healthy in the surgical area,and the nearby teeth and the opposite teeth were normal.[Results]The results of cone-beam computer tomography(CBCT)revealed that bone defects were filled with the newly formed bone.At the same time,the final impressions accomplished,and an all-ceramic crown was fit-placed.As a whole,the patient satisfaction rate was high.[Conclusions]Immediate implant placement with flap surgery,GBR,and non-submerged healing with a facial bone wall defect in the esthetic zone is an achievable process.

Comparison of Success Rate and Radiological Bone Loss in Patients with Mini-Implant versus Conventional-Sized Implant Removable Prostheses: A Meta-Analysis

Background: The objective of this meta-analysis was to assess whether mini-implants have added benefit in terms of implants success rate and average bone loss over conventional-sized implants after one year of follow-up. Methods: An electronic search of randomized clinical trials was conducted in MEDLINE (via PubMed), Cochrane Central Register of Clinical Trials (CENTRAL) and Web of Science for studies including complete or partial edentulous patients requiring two or four mini-implants or conventional/ standard-sized implants in the maxilla or mandible for implant-supported removable prostheses who completed 12 months of follow-up. Results: The search provided 194 unique articles which were screened for title and abstract. Screening generated 12 articles which went through full-text analysis using eligibility criteria, and 4 articles were included for meta-analysis. Meta-analysis of these studies indicated a non-significant difference in the success rate between the two interventions (OR = 1.69 [0.74, 3.85;p = 0.21]). Bone loss estimates resulted in a significant bone reduction (Mean Difference = -0.74 [-0.95, -0.53;p < 0.05]) in favor of two mini-implants when compared with two conventional-sized implants, but when compared four mini- with two conventional-sized implants, the estimates were non-significant (Mean Difference = -0.24 [-0.69, 0.20;p = 0.29]). Conclusion: The current evidence does not provide solid evidence of the benefits of one intervention over the other. More studies with follow-up times of 10 and more years are needed as current studies have described the short-term outcomes.

Simultaneous Upper and Lower Jaw Extractions, Autogenous Bone Augmentation and Temporary Implant Placement with Immediate Loading

Aims: We expanded the known technique for simultaneously augmenting an atrophic maxilla and placement of immediate provisional implants (IPI), followed by immediate loading by performing surgery in both jaws simultaneously. Feasibility of this new technique, implant survival and success were evaluated as well as prosthetic success. Materials and Methods: All patients undergoing simultaneous bone grafting and IPI placement with immediate loading at our institute between the 1st of June 2016 and the 30th of May 2018 were included and followed up for at least one year postoperatively. Results: 3 patients were followed for a mean period of 25.67 months (20 - 29 months). 33 IPIs were placed. All were immobile at second stage surgery without signs of infection. No provisional bridges were lost and no infections were noted. After second stage surgery, none of these 36 final dental implants were lost. There was some bone loss at one implant. In all patients, good functional and aesthetic results were obtained without any unforeseen complications. This renders the implant survival at 100% and the success rate at 97%. Conclusion: The technique is complex due to the intricate step-by-step process that is required and depends on a dedicated team to ensure a proper workflow. When performed correctly, the protocol shows good and predictable results.

Marginal bone loss around non-submerged implants is associated with salivary microbiome during bone healing

Marginal bone loss during bone healing exists around non-submerged dental implants. The aim of this study was to identify the relationship between different degrees of marginal bone loss during bone healing and the salivary microbiome. One hundred patients were recruited, and marginal bone loss around their implants was measured using cone beam computed tomography during a 3-month healing period. The patients were divided into three groups according to the severity of marginal bone loss.Saliva samples were collected from all subjected and were analysed using 16 SMiSeq sequencing. Although the overall structure of the microbial community was not dramatically altered, the relative abundance of several taxonomic groups noticeably changed. The abundance of species in the phyla Spirochaeta and Synergistetes increased significantly as the bone loss became more severe. Species within the genus Treponema also exhibited increased abundance, whereas Veillonella, Haemophilus and Leptotrichia exhibited reduced abundances, in groups with more bone loss. Porphyromonasgingivalis, Treponemadenticola and Streptococcus intermedius were significantly more abundant in the moderate group and/or severe group. The severity of marginal bone loss around the non-submerged implant was associated with dissimilar taxonomic compositions. An increased severity of marginal bone loss was related to increased proportions of periodontal pathogenic species. These data suggest a potential role of microbes in the progression of marginal bone loss during bone healing.

Bone block from lateral window-correcting vertical and horizontal bone deficiency in maxilla posterior site:A case report

BACKGROUND Lateral window approach for sinus floor lift is commonly used for vertical bone augmentation in cases when the residual bone height is less than 5 mm.However,managing cases becomes more challenging when a maxillary sinus pseudocyst is present or when there is insufficient bone width.In this case,we utilized the bone window prepared during the lateral window sinus lift as a shell for horizontal bone augmentation.This allowed for simultaneous horizontal and vertical bone augmentation immediately after the removal of the maxillary sinus pseudocyst.CASE SUMMARY A 28-year-old female presented to our clinic with the chief complaint of missing upper left posterior teeth.Intraoral examination showed a horizontal deficiency of the alveolar ridge contour.The height of the alveolar bone was approximately 3.6 mm on cone beam computed tomography(CBCT).And a typical well-defined'dome-shaped'lesion in maxillary sinus was observed on CBCT imaging.The lateral bony window was prepared using a piezo-ultrasonic device,then the bony window was fixed to the buccal side of the 26 alveolar ridge using a titanium screw with a length of 10 mm and a diameter of 1.5 mm.The space between the bony window and the alveolar ridge was filled with Bio-Oss,covered with a Bio-Gide collagen membrane,and subsequently sutured.Nine months later,the patient’s bone width increased from 4.8 to 10.5 mm,and the bone height increased from 3.6 to 15.6 mm.Subsequently,a Straumann^(■)4.1 mm×10 mm implant was placed.The final all-ceramic crown restoration was completed four months later,and both clinical and radiographic examinations showed that the implant was successful,and the patient was satisfied with the results.CONCLUSION The bone block harvested from the lateral window sinus lift can be used for simultaneous horizontal bone augmentation acting as a shell for good two-dimensional bone augmentation.

Osteotomy Protocol for Implant Insertion of One Day Biotech: One Drill, One Implant

Background: Four factors determine the quality of an implantology kit: 1) Heat generated by the drills;2) Morphology of the osteotomy according to the diameter of the implant;3) Efficiency of collecting autologous bone;and 4) Osteotomy execution time. Materials and Methods: This article examines the heat produced by drills during osteotomy, focusing on the effect of the following factors: drilling technique;volume of autologous bone harvested;drilling time;implant primary stability;and the percentage of osseointegrated implants after primary healing. Discussion: The four factors mentioned above are analyzed based on the data obtained for sequential, biological, and One Drill milling techniques. Conclusions: 1) One Drill is the fastest technique for performing the osteotomy;2) All techniques stay within the biological temperature range of living bone, with the lowest increase in temperature achieved using One Drill with irrigation;3) The bone harvested showed no statistically significant differences between biological milling and the One Drill technique, both far superior to the sequential technique;and 4) There is no statistically significant difference in the number of osseointegrated implants among the three techniques analyzed.

Vancomycin-encapsulated hydrogel loaded microarc-oxidized 3D-printed porous Ti6Al4V implant for infected bone defects:Reconstruction,anti-infection,and osseointegration

Infected bone defect is a formidable clinical challenge.Conventional approaches to prevention and treatment for infected bone defects are unsatisfactory.The key elements of the treatment are bone defect reconstruction,antiinfection,and osteogenesis.Conventional treatment methods remain unsatisfactory owing to the absence of composite integrating materials with anti-infective,and osteogenic activities as well as proper mechanical strength at the same time.In this study,we fabricated a vancomycin-encapsulated hydrogel with bacteriaresponsive release properties combined with a shaved porous(submicron-micron)three-dimensional-printed Ti6Al4V implant.The implant surface,modified with submicron-sized pores through microarc oxidation(MAO),showed enhanced osteogenic activity and integrated well with the hydrogel drug release system,enabling sustained vancomycin release.In vitro experiments underscored the commendable antibacterial ability,biosafety,and osteoinductive potential.Effective antibacterial and osteogenic abilities of the implant were further demonstrated in vivo in infected rabbit bone defects.These results showed that the vancomycinencapsulated hydrogel-loaded microarc-oxidized 3D-printed porous Ti6Al4V can repair the infected bone defects with satisfactory anti-infection and osseointegration effects.

Clinical evaluation of implants in patients with maxillofacial defects

AIM: To show the efficacy of reconstruction and rehabilitation of large acquired maxillofacial defects due to tumor resections and firearm injuries. METHODS: The study group comprised of 16 patients(10 men and 6 women) who were operated on because of their maxillofacial defects under local and general anesthesia between June 2007 and June 2011. Prosthetic treatment with the aid of dental implants was performed for all of the patients. Eight patients received an implant supported fixed prosthesis; six patients received implant supported overdentures and two patients received both. Patients were followed up postoperatively for 1 to 4 years. Implant success and survival rates were recorded. Panoramic radiographs were taken preoperatively, immediately after surgery, immediately after loading and at every recall session. Peri-implant and prosthetic complications were recorded. Subjects were asked to grade their oral health satisfaction after treatment according to 100 mm visual analog scale(VAS) and the oral health related quality oflife of the patients was measured with the short-form Oral Health Impact Profile. RESULTS: Five implants(3 in the mandible, 2 in the maxilla) in five patients were lost, while the other 53 survived, which brings an overall survival rate of 91.37% on the implant basis, but 68.75% on patient basis. All the failed implants were lost before abutment connection and were therefore regarded as early failures. For all failed implants, new implants were placed after a 2 mo period and the planning was maintained. The mean marginal bone loss(MBL) was 1.4 mm on the mesial side and 1.6 mm on the distal side of the implants. Five of the implants showed MBL > 2 mm(mean MBL = 2.3 mm) but less than 1/2 of the implant bodies and therefore were regarded as not successful but surviving implants. The VAS General Comfort mean score was 85.07, the VAS Speech mean score was 75.25 and the VAS Esthetics mean score was 82.74. No patient reported low scores(score lower than 50) of satisfaction in any of the evaluated factors. The mean of OHIP-14 scores was 5.5. CONCLUSION: Although further follow up and larger case numbers will give more information about the success of dental implants as a treatment modality in maxillofacial defects patients, the actual results are encouraging and can be recommended for similar cases.

Mechanical force enhanced bony formation in defect implanted with calcium sulphate cement

To improve the osteogenic property of bone repairing materials and to accelerate bone healing are major tasks in bone biomaterials research. The objective of this study was to investigate if the mechanical force could be used to accelerate bone formation in a bony defect in vivo. The calcium sulfate cement was implanted into the left distal femoral epiphyses surgically in 16 rats. The half of rats were subjected to external mechanical force via treadmill exercise, the exercise started at day 7 postoperatively for 30 consecutive days and at a constant speed 8 m·min-1 for 45 min·day-1, while the rest served as a control. The rats were scanned four times longitudinally after surgery using microcomputed tomography and newly formed bone was evaluated. After sacrificing, the femurs had biomechanical test of three-point bending and histological analysis. The results showed that bone healing under mechanical force were better than the control with residual defect areas of 0.64±0.19 mm2 and 1.78±0.39 mm2（P〈0.001）, and the ultimate loads to failure under mechanical force were 69.56±4.74 N, stronger than the control with ultimate loads to failure of 59.17±7.48 N（P=0.039）. This suggests that the mechanical force might be used to improve new bone formation and potentially offer a clinical strategy to accelerate bone healing.

The effect of platform switching on the levels of metal ion release from different implant–abutment couples

The improved peri-implant bone response demonstrated by platform switching may be the result of reduced amounts of metal ions released to the surrounding tissues. The aim of this study was to compare the levels of metal ions released from platform-matched and platform-switched implant-abutment couples as a result of accelerated corrosion. Thirty-six titanium alloy （Ti-6AI-4V） and cobalt-chrome alloy abutments were coupled with titanium cylinders forming either platform-switched or platform-matched groups （n = 6）. In addition, 18 unconnected samples served as controls. The specimens were subjected to accelerated corrosion by static immersion in 1% lactic acid for 1 week. The amount of metal ions ion of each test tube was measured using inductively coupled plasma mass spectrometry. Scanning electron microscope （SEM） images and energy dispersive spectroscopy X-ray analyses were performed pre- and post-immersion to assess corrosion at the interface. The platform-matched groups demonstrated higher ion release for vanadium, aluminium, cobalt, chrome, and molybdenum compared with the platform-switched groups （P〈 0.05）. Titanium was the highest element to be released regardless of abutment size or connection （P〈0.05）. SEM images showed pitting corrosion prominent on the outer borders of the implant and abutment platform surfaces. In conclusion, implant-abutment couples underwent an active corrosion process resulting in metal ions release into the surrounding environment. The highest amount of metal ions released was recorded for the platform-matched groups, suggesting that platform-switching concept has a positive effect in reducing the levels of metal ion release from the implant-abutment couples.

褪黑素促进骨再生机制及在口腔种植中的应用

背景:牙槽骨的缺损会危害患者的口颌功能和身心健康。褪黑素因具有促进骨再生特性,可用于预防和治疗骨缺损疾病,对与口腔种植相关的骨结合及种植体周围炎症也有重要应用。目的:探讨褪黑素促进骨再生机制、褪黑素在口腔种植领域的潜在应用,为在口腔种植中发挥褪黑素促骨生成特性提供新的思路。方法:以“褪黑素,骨缺损,成骨细胞,破骨细胞,活性氧,牙周炎,骨结合,种植体周围炎”为中文检索词,以“melatonin,bone defect,osteoblast,osteoclast,ROS,periodontitis,osseointegration,periimplantitis”为英文检索词,应用计算机检索中国知网、PubMed数据库收录的相关文献。检索时限重点为2019年1月至2024年8月,同时纳入少数经典远期文献。通过阅读文题和摘要进行筛选,最终纳入91篇文献进行综述。结果与结论:①褪黑素促进骨再生,机制是促进成骨细胞、软骨细胞和血管内皮细胞的增殖和分化,抑制骨吸收,限制氧化应激。②褪黑素作为骨形成的促进剂,在口腔种植中起到促进骨结合和预防种植体周围炎的作用。③未来还需要更多的研究完整地揭示褪黑素的成骨机制,并作出褪黑素在骨结合和种植体周围炎方面的最佳给药条件和安全性指南。

Dynamic navigation system-guided trans-inferior alveolar nerve implant placement in the atrophic posterior mandible: A case report

BACKGROUND In atrophic posterior mandibular areas,where the bone height superior to the inferior alveolar nerve(IAN)is less than 6 mm,short implants are not applicable.Conventional alternatives such as IAN transposition and various alveolar bone augmentation approaches are technically demanding and prone to complications.CASE SUMMARY Computer-guided dynamic navigation implantation improves the accuracy,predictability,and safety of implant placement.This case report presents a dynamic navigation system-guided trans-IAN implant placement technique,which can successfully treat a posterior mandibular dentition defect when the bone height is only 4.5 mm.The implant was inserted into the buccal side of the IAN and was 1.7 mm away from the IAN.The implantation deviations were controlled within a satisfying range,and the long-term restoration outcome was stable.CONCLUSION Dynamic navigation system-guided trans-IAN implant placement might be a recommended technique for patients with extremely insufficient residual bone height and sufficient bone width in the posterior mandibular area.