This paper proposes a modified centralized shifted Rayleigh filter（MCSRF） algorithm for tracking boost phase of ballistic missile（BM） trajectory with a highly nonlinear dynamical model based on bearings-only.This ...This paper proposes a modified centralized shifted Rayleigh filter（MCSRF） algorithm for tracking boost phase of ballistic missile（BM） trajectory with a highly nonlinear dynamical model based on bearings-only.This paper contributes three folds.Firstly,the mathematical model of an MCSRF for multiple passive sensors is derived.Then,minimum entropy based onedimensional optimization search to adaptively adjust the probability of the different filters for real time state estimation is deployed.Finally,the unscented transform（UT） is introduced to resolve the asymmetric state estimation problem.Simulation results show that the proposed algorithm can consecutively track the BM precisely during the boost phase.In comparison with the unscented Kalman filter（UKF） algorithm,the proposed algorithm effectively reduces the tracking position and velocity root mean square（RMS） errors,which will make more sense for early precision interception.展开更多
This article proposes a multidisciplinary design and optimization （MDO） strategy for the conceptual design of a multistage ground-based interceptor （GBI） using hybrid optimization algorithm, which associates genet...This article proposes a multidisciplinary design and optimization （MDO） strategy for the conceptual design of a multistage ground-based interceptor （GBI） using hybrid optimization algorithm, which associates genetic algorithm （GA） as a global optimizer with sequential quadratic programming （SQP） as a local optimizer. The interceptor is comprised of a three-stage solid propulsion system for an exoatmospheric boost phase intercept （BPI）. The interceptor＇s duty is to deliver a kinetic kill vehicle （KKV） to the optimal position in space to accomplish the mission of intercept. The modules for propulsion, aerodynamics, mass properties and flight dynamics are integrated to produce a high fidelity model of the entire vehicle. The propulsion module com- prises of solid rocket motor （SRM） grain design, nozzle geometry design and performance prediction analysis. Internal ballistics and performance prediction parameters are calculated by using lumped parameter method. The design objective is to minimize the gross lift off mass （GLOM） of the interceptor under the mission constraints and performance objectives. The proposed design and optimization methodology provide designers with an efficient and powerful approach in computation during designing interceptor systems.展开更多
A conditional boost-phase trajectory estimation method based on ballistic missile （BM） information database and classification is developed to estimate and predict boos-phase BM trajectory. The main uncertain factor...A conditional boost-phase trajectory estimation method based on ballistic missile （BM） information database and classification is developed to estimate and predict boos-phase BM trajectory. The main uncertain factors to describe BM dynamics equation are reduced to the control law of trajectory pitch angle in boost-phase. After the BM mass at the beginning of estimation, the BM attack angle and the modification of engine thrust denoting BM acceleration are modeled reasonably, the boost-phase BM trajectory estimation with ground based radar is well realized. The validity of this estimation method is testified by computer simulation with a typical example.展开更多
This paper presents a new inverter based on three-phase Boost/Buck-boost single-stage inverter. The basic configuration of the new topology and their fundamental principle are firstly introduced, the method of design ...This paper presents a new inverter based on three-phase Boost/Buck-boost single-stage inverter. The basic configuration of the new topology and their fundamental principle are firstly introduced, the method of design double-loop controller and sliding mode controller are clarified, analyzed and compared in the following. Finally the validity and feasibility of the new topology are tested by simulation. The results indicate that regulation of the voltage transfer ratio and output frequency can be realized optionally by the new converter, furthermore the harmonic distortion of waveform is low. So the inherent drawback of low voltage transfer ratio of traditional converter is effectively settled. This study may provide inspiration for further engineering application.展开更多
提出一种新颖的三相Boost型光伏并网逆变器,并对其拓扑、双环改进型分区SPWM控制策略、低频模态、储能开关关断电压尖峰抑制、高频开关过程、光伏电池最大功率点跟踪(maximum power point tracking,MPPT)、关键电路参数设计准则等进行...提出一种新颖的三相Boost型光伏并网逆变器,并对其拓扑、双环改进型分区SPWM控制策略、低频模态、储能开关关断电压尖峰抑制、高频开关过程、光伏电池最大功率点跟踪(maximum power point tracking,MPPT)、关键电路参数设计准则等进行了深入的分析研究,获得了重要结论。其拓扑是由输入滤波电容、中心抽头储能电感、三相逆变桥、三相输出滤波器级联构成,且在储能电感中心抽头与输入源负端间接有储能开关;其控制策略是对三相电网电压进行60°分区,以确保每个开关周期均满足Boost型变换器的工作机理。设计并研制了3kW 96VDC/380V 50Hz 3φAC逆变器,实验结果表明,这类逆变器具有升压比大、功率密度高、变换效率高、储能电感和输出滤波器小、并网电流质量高等优良性能,在单级三相低压并网逆变场合具有重要应用前景。展开更多
基金supported by the Aerospace Science and Technology Innovation Foundation (CASC0202-3)
文摘This paper proposes a modified centralized shifted Rayleigh filter（MCSRF） algorithm for tracking boost phase of ballistic missile（BM） trajectory with a highly nonlinear dynamical model based on bearings-only.This paper contributes three folds.Firstly,the mathematical model of an MCSRF for multiple passive sensors is derived.Then,minimum entropy based onedimensional optimization search to adaptively adjust the probability of the different filters for real time state estimation is deployed.Finally,the unscented transform（UT） is introduced to resolve the asymmetric state estimation problem.Simulation results show that the proposed algorithm can consecutively track the BM precisely during the boost phase.In comparison with the unscented Kalman filter（UKF） algorithm,the proposed algorithm effectively reduces the tracking position and velocity root mean square（RMS） errors,which will make more sense for early precision interception.
文摘This article proposes a multidisciplinary design and optimization （MDO） strategy for the conceptual design of a multistage ground-based interceptor （GBI） using hybrid optimization algorithm, which associates genetic algorithm （GA） as a global optimizer with sequential quadratic programming （SQP） as a local optimizer. The interceptor is comprised of a three-stage solid propulsion system for an exoatmospheric boost phase intercept （BPI）. The interceptor＇s duty is to deliver a kinetic kill vehicle （KKV） to the optimal position in space to accomplish the mission of intercept. The modules for propulsion, aerodynamics, mass properties and flight dynamics are integrated to produce a high fidelity model of the entire vehicle. The propulsion module com- prises of solid rocket motor （SRM） grain design, nozzle geometry design and performance prediction analysis. Internal ballistics and performance prediction parameters are calculated by using lumped parameter method. The design objective is to minimize the gross lift off mass （GLOM） of the interceptor under the mission constraints and performance objectives. The proposed design and optimization methodology provide designers with an efficient and powerful approach in computation during designing interceptor systems.
文摘A conditional boost-phase trajectory estimation method based on ballistic missile （BM） information database and classification is developed to estimate and predict boos-phase BM trajectory. The main uncertain factors to describe BM dynamics equation are reduced to the control law of trajectory pitch angle in boost-phase. After the BM mass at the beginning of estimation, the BM attack angle and the modification of engine thrust denoting BM acceleration are modeled reasonably, the boost-phase BM trajectory estimation with ground based radar is well realized. The validity of this estimation method is testified by computer simulation with a typical example.
文摘This paper presents a new inverter based on three-phase Boost/Buck-boost single-stage inverter. The basic configuration of the new topology and their fundamental principle are firstly introduced, the method of design double-loop controller and sliding mode controller are clarified, analyzed and compared in the following. Finally the validity and feasibility of the new topology are tested by simulation. The results indicate that regulation of the voltage transfer ratio and output frequency can be realized optionally by the new converter, furthermore the harmonic distortion of waveform is low. So the inherent drawback of low voltage transfer ratio of traditional converter is effectively settled. This study may provide inspiration for further engineering application.
文摘提出一种新颖的三相Boost型光伏并网逆变器,并对其拓扑、双环改进型分区SPWM控制策略、低频模态、储能开关关断电压尖峰抑制、高频开关过程、光伏电池最大功率点跟踪(maximum power point tracking,MPPT)、关键电路参数设计准则等进行了深入的分析研究,获得了重要结论。其拓扑是由输入滤波电容、中心抽头储能电感、三相逆变桥、三相输出滤波器级联构成,且在储能电感中心抽头与输入源负端间接有储能开关;其控制策略是对三相电网电压进行60°分区,以确保每个开关周期均满足Boost型变换器的工作机理。设计并研制了3kW 96VDC/380V 50Hz 3φAC逆变器,实验结果表明,这类逆变器具有升压比大、功率密度高、变换效率高、储能电感和输出滤波器小、并网电流质量高等优良性能,在单级三相低压并网逆变场合具有重要应用前景。
