Optimized Model Based Controller with Model Plant Mismatch for NMP Mitigation in Boost Converter

In this paper,an optimized Genetic Algorithm(GA)based internal model controller-proportional integral derivative(IMC-PID)controller has been designed for the control variable to output variable transfer function of dc-dc boost converter to mitigate the effect of non-minimum phase(NMP)behavior due to the presence of a right-half plane zero(RHPZ).This RHPZ limits the dynamic performance of the converter and leads to internal instability.The IMC PID is a streamlined counterpart of the standard feedback controller and easily achieves optimal set point and load change performance with a single filter tuning parameterλ.Also,this paper addresses the influences of the model-based controller with model plant mismatch on the closed-loop control.The conventional IMC PID design is realized as an optimization problem with a resilient controller being determined through a genetic algorithm.Computed results suggested that GA–IMC PID coheres to the optimum designs with a fast convergence rate and outperforms conventional IMC PID controllers.

基于新型CD单元的两相交错并联高增益Boost变换器

为减少基于电容-二极管(CD)升压单元的两相交错并联高增益Boost变换器的CD单元数量,提升变换器电压增益,提出一种最后两级CD单元电容并联充电、串联供电的新型两相交错Boost变换器拓扑结构,进一步发挥CD单元的升压能力。分析新型3CD、4CD两相交错并联Boost变换器的拓扑演化过程,提出新型NCD两相交错并联Boost变换器的拓扑演化规律。以新型4CD两相交错并联Boost变换器为例,分析变换器工作原理,以及电感、电容寄生电阻对变换器电压增益的影响。最后在StarSim硬件在环实验平台搭建1 kW的新型4CD单元交错并联Boost变换器,验证该文所提拓扑的正确性。

一种基于分数阶微积分的CCM Boost变换器准在线无源参数的数字孪生辨识方法

由于具有高性价比、准确性和数字化等优点,数字孪生已成为电力电子变换器故障趋势判断和预知维护的先进技术。针对当前电力电子变换器所建立的数字孪生模型尚未考虑实际电感、电容的分数阶特性的问题,基于分数阶微积分构建电力电子电路的预估-校正数字孪生模型,应用基于粒子群优化(particle swarm optimization,PSO)算法的孪生参数辨识方法对不同分数阶阶次下的电感值(L)和电容值(C)进行辨识,并计算出等效串联电阻。通过与现有方法对比,该方法不仅提高了实际电感和实际电容的辨识精度,还能辨识出不同阶次下与不同C下的分数阶参数。最后,搭建不同L和C及分数阶阶次的连续导通模式Boost变换器物理样机,并考虑不同工况条件与不同辨识次数等因素来进行实验验证。实验结果验证了所提模型与方法的有效性。

基于预估-校正算法的分数阶Boost变换器倍周期分岔研究

基于电感电容本质是分数阶的事实,对分数阶Boost变换器的非线性动力学特性进行了深入研究。采用分数阶微积分的预估-校正算法,建立了Boost变换器的预估-校正模型,在此基础上得到了以参考电流、输入电压以及电容电感阶数为分岔参数的分岔图,研究了变换器的倍周期分岔和混沌行为,同时与整数阶Boost变换器的非线性动力学行为进行了比较。研究结果表明,在一定的工作条件下,随着变换器某些电路参数的变化,分数阶Boost变换器会出现分岔和混沌等非线性现象;在相同电路参数的条件下,整数阶和分数阶变换器的稳定参数域之间存在差异,与整数阶变换器相比,分数阶变换器的参数稳定区域更小,更真实地反映了Boost变换器的非线性动力学特性。

带感性负载的Buck-Boost变换器的非线性行为分析及优化控制

Buck-Boost变换器在某些参数发生变化时会呈现出丰富的非线性行为,这些行为将严重影响系统的稳定性,使得系统输出的电能质量劣化。文章基于实际变换器的负载特性,深入研究了感性阻抗负载下Buck-Boost变换器的非线性行为产生机理,提出了一种对数延迟反馈控制方法。该方法选取系统的输出延迟值与自身的值作差形成反馈信号;将该信号通过比例环节、求和环节和对数环节形成控制信号,以负反馈的形式施加于系统;最后基于稳定判据确定最优控制参数并对系统实施控制。为验证该方法的有效性,进行了大量的仿真实验,结果表明该方法能很好地抑制系统的非线性行为,扩展其稳定边界,改善系统输出的电能质量。

基于能量模型的临界导通模式Boost变换器软开关方法

在变换器高频化发展的趋势中,功率器件的软开关实现对变换效率的影响更加突出。无辅助电路的临界导通工作模式下,Boost变换器主开关管在特定增益下无法实现软开关。为此,该文提出一种能量模型及相应的软开关实现方法。首先,建立死区前后储能元件能量变化的数学模型。然后,结合死区起止时刻的能量平衡方程,研究软开关无法实现的电路机理。在此基础上,考虑开关管输出电容非线性特征,提出软开关实现方法,避免了复杂谐振过程的时域精确建模,提高软开关实现的准确性。最后,搭建500W实验样机进行实验,结果表明,相较于对谐振过程建模的传统时域模型,所提方法将实际开通电压降低47%,使峰值变换效率提升0.4%,进而验证了其有效性。

Super-Boost变换器的工作模式及输出纹波电压分析

Super-Boost变换器代替传统的充、放电模块可大大减小电源的质量和体积,提高其功率密度,因此在空间电力系统中具有广阔的应用前景。但由于Super-Boost变换器有多个功率元件,且存在电感电流反向流动特性,导致其供能模式及输出纹波电压较传统Boost变换器复杂。为了给Super-Boost变换器的分析和设计提供正确的理论指导,对Super-Boost变换器供能模式及输出纹波电压进行了深入研究。研究发现,电感L_(1)和L_(2)均存在连续导电模式、伪连续导电模式和伪断续导电模式等工作模式,建立各工作模式的临界电感和输出纹波电压解析数学模型,探讨峰值电流与电感间的关系,得到了满足设计要求的最小电容和最小电感,据此给出了变换器参数设计方法,实验结果验证了理论分析的正确性。

宽增益高效率级联式四开关Buck-Boost LLC变换器

为了解决变频控制的桥臂共用型四开关Buck-BoostLLC级联变换器磁性元件设计和优化困难的问题,提出一种二次侧为特殊全桥整流结构的级联式四开关Buck-Boost LLC变换器。通过控制二次侧开关管的交叠导通时间以拓宽变换器的电压增益。该变换器可根据不同的输入电压范围工作在交叠模式和整流模式;在不改变变换器参数的条件下将增益显著提高,能够适应更宽范围的输入电压,同时保持了变换器较高的工作效率。在两种工作模式的基础上,采用移相控制使变换器所有开关管实现零电压导通(ZVS),二极管实现零电流关断(ZCS)。结合状态平面轨迹分析法,对定频控制的级联式四开关Buck-Boost LLC变换器进行模态分析,并推导两种工作模式下的输入-输出表达式和开关管的软开关实现条件。最后,通过研制一台70~280 V输入、240 W/28 V输出的实验样机,验证了理论分析的正确性。

非最小相位的单电感双输出Buck-Boost变换器的复合控制方法

单电感双输出Buck-Boost (SIDO Buck-Boost)变换器在电感电流连续模式(CCM)下工作存在交叉影响以及非最小相位特性的问题.为了解决上述问题,提出基于储能函数的扩张状态观测器(ESO)的改进非奇异快速终端滑模(NFTSM)和自抗扰控制(ADRC)相结合的控制策略.设计主路控制器,对系统的传递函数进行拟合得到ADRC范式,利用该范式对主路进行解耦控制.设计支路控制器,采用改进型ESO对储能函数进行观测,并将观测值反馈补偿到非奇异快速终端滑模控制律中,达到支路解耦的效果.为了抑制滑模控制的抖振问题,对趋近律进行改进.利用Lyapunov理论证明系统稳定性.基于硬件在环(HIL)实验平台进行实验验证.结果表明,所提控制策略与PI控制策略以及基于ESO的滑模控制策略相比,在超调量和响应时间上具有较好的效果.

基于开关流图法的Buck-Boost变换器小信号建模分析

阐述Buck-Boost变换器具有输出纹波低,电压可控等优点,广泛应用于新能源汽车电池发电、直流微电网。建立小信号模型有利于对电路系统主电路的控制和控制回路的设计。分析Buck-Boost变换器,利用开关流图法和信号支路的模型建立变换器的流图,从而推导出变换器的小型号模型。

Study on bifurcation and stability of the closed-loop current-programmed boost converters

In order to predict bifurcation point of the closed-loop current-programmed boost converter and enable this converter to operate at stable parameter space, this paper firstly establishes stroboscopic maps for this converter in the continuous conduction mode according to operating characteristics and topple of this converter. Parameter space at the steady state and bifurcation types are analysed together with stability theory of nonlinear equation. In the solving course, the duty cycle is avoided because of inversive solution, and accuracy is increased. Finally, correction is proved by numerical calculation.

DC–DC Converter with Pi Controller for BLDC Motor Fuzzy Drive System

The Brushless DC Motor drive systems are used widely with renewable energy resources.The power converter controlling technique increases the performance by novel techniques and algorithms.Conventional approaches are mostly focused on buck converter,Fuzzy logic control with various switching activity.In this proposed research work,the QPSO(Quantum Particle Swarm Optimization algorithm)is used on the switching state of converter from the generation unit of solar module.Through the duty cycle pulse from optimization function,the MOSFET(Metal-Oxide-Semiconductor Field-Effect Transistor)of the Boost converter gets switched when BLDC(Brushless Direct Current Motor)motor drive system requires power.Voltage Source three phase inverter and Boost converter is controlled by proportional-integral(PI)controller.Based on the BLDC drive,the load utilized from the solar generating module.Experimental results analyzed every module of the proposed grid system,which are solar generation utilizes the irradiance and temperature depends on this the Photovoltaics(PV)power is generated and the QPSO with Duty cycle switching state is determined.The Boost converter module is boost stage based on generation and load is obtained.Single Ended Primary Inductor Converter(SEPIC)and Zeta converter model is compared with the proposed logic;the proposed boost converter achieves the results.Three phase inverter control,PI,and BLDC motor drive results.Thus the proposed grid model is constructed to obtain the better performance results than most recent literatures.Overall design model is done by using MATLAB/Simulink 2020a.

Mode shift and stability control of a current mode controlled buck-boost converter operating in discontinuous conduction mode with ramp compensation

By establishing the discrete iterative mapping model of a current mode controlled buck-boost converter, this paper studies the mechanism of mode shift and stability control of the buck-boost converter operating in discontinuous conduction mode with a ramp compensation current. With the bifurcation diagrazn, Lyapunov exponent spectrum, time- domain waveform and parameter space map, the performance of the buck-boost converter circuit utilizing a compensating ramp current has been analysed. The obtained results indicate that the system trajectory is weakly chaotic and strongly intermittent under discontinuous conduction mode. By using ramp compensation, the buck-boost converter can shift from discontinuous conduction mode to continuous conduction mode, and effectively operates in the stable period-one region.

具有谐振软开关的高增益耦合电感组合Boost-Zeta变换器

该文提出一种适用于光伏发电系统的具有谐振软开关的高增益耦合电感组合Boost-Zeta变换器。该变换器是由Boost变换器与Zeta变换器组合并引入有源钳位支路和谐振耦合倍压单元而得到。所提变换器利用拓扑组合和耦合倍压技术实现了非常高的电压增益。利用有源钳位支路,实现了所有开关管零电压开通。同时,利用二次绕组与谐振电容谐振实现了所有二极管的零电流关断,有效地解决了二极管反向恢复问题。分析变换器的工作原理,给出变换器的各项性能参数和软开关实现条件。所提变换器还可通过叠加倍压单元进一步提升电压增益。最后,搭建一台200 W实验样机,对理论分析进行了验证。

基于R-L分数阶定义的PCCM Boost变换器建模与分析

研究了基于R-L分数阶定义的电感电流伪连续PCCM(pseudo-continuous conduction mode)Boost变换器模型,并由此导出了变换器的状态平均模型,然后推导出升压比,直流静态工作点,电感电流波纹以及输出电压波纹的表达式。结果表明,与基于Caputo分数阶定义下的变换器模型相应表达式比较,R-L分数阶定义下的直流静态工作点和升压比不仅与占空比相关,而且还与电感和电容的阶数有关,输出电压波纹的表达式不仅与分数阶电感的阶数α有关,与分数阶电容的阶数β也相关。电感和电容的阶数对状态变量的直流分量和分数阶PCCM Boost的稳态特性有很大影响。最后,在MATLAB/SIMULINK中搭建了R-L分数阶PCCM Boost变换器数学模型和电路模型,仿真结果显示R-L分数阶PCCM Boost变换器模型的分析结果比其他PCCM Boost模型的分析结果更加稳定,误差更小。

Modeling and dynamics analysis of the fractional-order Buck-Boost converter in continuous conduction mode

In this paper, the fractional-order mathematical model and the fractional-order state-space averaging model of the Buck-Boost converter in continuous conduction mode （CCM） are established based on the fractional calculus and the Adomian decomposition method. Some dynamical properties of the current-mode controlled fractional-order Buck- Boost converter are analysed. The simulation is accomplished by using SIMULINK. Numerical simulations are presented to verify the analytical results and we find that bifurcation points will be moved backward as α and β vary. At the same time, the simulation results show that the converter goes through different routes to chaos.

四相交错Boost变换器的解耦均流控制方法

交错并联Boost变换器通常采用双闭环控制输出电压,均流环平衡电感电流。但是,在变换器的控制过程中,双闭环与均流环往往存在耦合问题。为此,提出了一种主从均流解耦的控制方法,削弱双闭环与均流环控制时的耦合关系。首先,介绍了四相交错并联Boost变换器的拓扑结构及工作原理,建立小信号数学模型,并推导出传递函数;其次,阐述了双闭环与均流环的解耦的条件,提出了一种双闭环与均流环的解耦的控制策略,实现双闭环与均流环之间的解耦;最后,在PSIM中搭建了四相交错并联Boost变换器仿真平台,进行四相交错并联控制。仿真结果表明,采用主从均流解耦的控制方法后,输出电压波动明显降低,证明了所提方法的可行性和有效性。

Inductor Current Sampled Feedback Control of Chaos in Current-Mode Boost Converter

A chaos control strategy for chaotic current-mode boost converter is presented by using inductor current sampled feedback control technique.The quantitative analysis of control mechanism is performed by establishing a discrete alterative map of the controlled system.The stability criterion,feedback gain,and corresponding critical duty ratio are obtained from the eigenvalue of the map.The simulation results verify the t heoretical analysis results of the control strategy.

Sampled-data modeling and dynamical effect of output-capacitor time-constant for valley voltage-mode controlled buck-boost converter

By analyzing the output voltage ripple of a buck-boost converter with large equivalent series resistance（ESR） of output capacitor, one valley voltage-mode controller for buck-boost converter is proposed. Considering the fact that the increasing and decreasing slopes of the inductor current are assumed to be constant during each switching cycle, an especial sampleddata model of valley voltage-mode controlled buck-boost converter is established. Based on this model, the dynamical effect of an output-capacitor time-constant on the valley voltage-mode controlled buck-boost converter is revealed and analyzed via the bifurcation diagrams, the movements of eigenvalues, the Lyapunov exponent spectra, the boundary equations,and the operating-state regions. It is found that with gradual reduction of output-capacitor time-constant, the buck-boost converter in continuous conduction mode（CCM） shows the evolutive dynamic behavior from period-1 to period-2, period-4, period-8, chaos, and invalid state. The stability boundary and the invalidated boundary are derived theoretically by stability analysis, where the stable state of valley voltage-mode controlled buck-boost converter can enter into an unstable state, and the converter can shift from the operation region to a forbidden region. These results verified by time-domain waveforms and phase portraits of both simulation and experiment indicate that the sampled-data model is correct and the time constant of the output capacitor is a critical factor for valley voltage-mode controlled buck-boost converter, which has a significant effect on the dynamics as well as control stability.

SLIDE-MODE CONTROL SCHEME WITH DYNAMIC MODIFYING ERRORS FOR BOOST CONVERTER

A novel control scheme is presented by using sliding-mode control for boost converter operating in continuous conduction mode (CCM). Although the non-ideal switching condition and physical constraint of the control are considered on the base of equivalent control, the scheme is still simple. By modifying the sliding-modc errors in each switching period, the steady-state errors and chattering can be substantially reduced. Simulation results confirm the theoretical analysis and show the improvement of the converter’s start-up behavior and low sensitivity to external perturbation.