The effect of chemical composition of highly active supported Ziegler-Natta catalysts with controlled morphology on the MWD of PE has been studied.It was shown the variation of transition metal compound in the MgCl_2-...The effect of chemical composition of highly active supported Ziegler-Natta catalysts with controlled morphology on the MWD of PE has been studied.It was shown the variation of transition metal compound in the MgCl_2-supported catalyst affect of MWD of PE produced in broad range:Vanadium-magnesium catalyst(VMC)produce PE with broad and bimodal MWD(M_w/M_n=14-21).MWD of PE,produced over titanium-magnesium catalyst(TMC)is narrow or medium depending on Ti content in the catalyst(M_w/M_n=3.1-4.8).The oxidation ...展开更多
The viscoelastic behavior of isotactic polypropylene with ultra-high molecular weight(UHPPH) and broad molecular weight distribution(MWD), produced in the presence of Ziegler-Natta catalyst, was investigated by means ...The viscoelastic behavior of isotactic polypropylene with ultra-high molecular weight(UHPPH) and broad molecular weight distribution(MWD), produced in the presence of Ziegler-Natta catalyst, was investigated by means of oscillatory rheometry at 180 and 200 ℃, whose loss modulus(G″) plots at 180 and 200 ℃ versus the natural logarithm of angular frequency(ω) present a pronounced maximum at 34.35 and 69.21 rad/s, respectively, and do not show a maximum peak at 0.01-100 rad/s for Ziegler-Natta catalyzing ethylene-propylene random copolymerization(PPR) with a conventional molecular weight and broad MWD. The fact indicates that the high molecular weight is responsible for a maximum peak of G″(ω) vs. lnω curves for UHPPH. This makes it possible to determine the plateau modulus(G 0_N) of UHPPH from a certain experimental temperature G″(ω) curve directly. For UHPPH, the G 0_N determined to be 4.28×10 5 and 3.62×10 5 Pa at 180 and 200 ℃, respectively, decreases with the increase of temperature and is independent of the molecular weight, which directly confirms reputation theoretical prediction that the G 0_N has no relation to the molecular weight.展开更多
Two kinds of cycloalkoxy silane compounds were synthesized and used as the internal electron donors （IEDs） of supported Ziegler-Natta catalyst for ethylene polymerization to produce polyethylene with broader molecul...Two kinds of cycloalkoxy silane compounds were synthesized and used as the internal electron donors （IEDs） of supported Ziegler-Natta catalyst for ethylene polymerization to produce polyethylene with broader molecular weight distribution （MWD）, The effect of the structure and the amount of these IEDs on the polymerization performance was in- vestigated. The results implied that the molecular weight distribution of the obtained polyethylene could be adjusted by the incorporation of IEDs. SEM result showed that the morphology of catalyst particle was spherical and uniform in size distribution. The titanium content of these catalysts was higher, the active TiCl4 species were easily anchored on the support than that without adding IED, which was determined by ICE The GPC result confirmed that the polyethylene with broader molecular weight distribution in the range of from 23.4 to 25.6 was obtained using triethoxy-（-cyclopentyloxy）-silane （ED1） and triethoxy-（-cyclohexyloxyl）- silane （ED2） as the internal electron donors.展开更多
Mesoporous silica （MS）, 3-aminopropyltriethoxysilane （APTES） modified mesoporous silica （AMS）, bis（3- trimethoxysilylpropyl）amine modified mesoporous silica （BAMS） and APTES modified solid spherical silica ...Mesoporous silica （MS）, 3-aminopropyltriethoxysilane （APTES） modified mesoporous silica （AMS）, bis（3- trimethoxysilylpropyl）amine modified mesoporous silica （BAMS） and APTES modified solid spherical silica （AS） were prepared and used to immobilize metallocene catalysts for ethylene polymerization. Gel permeation chromatography results showed that polyethylenes （PEs） catalyzed by AMS （or BAMS） supported metallocene catalysts at the molar ratios of Al/Zr = 100, 300 and 500 were of bimodal molecular weight distribution （BMWD）; while PEs catalyzed by the above catalysts at the molar ratios of Al/Zr 〉 800 were of monomodal molecular weight distribution （MMWD）. However, MS （or AS） supported metallocene catalysts could only produce PEs with MMWD in spite of the molar ratio of Al/Zr. It was because that AMS （or BAMS） supported catalysts possessed two active sites for ethylene polymerization at low molar ratios of Al/Zr due to the combination effects of mesopore geometrical constraint and amino groups of the supports, which was confirmed by X-ray photoelectron spectroscopy. This brings forward a novel and easy method for the synthesis of polyolefin with BMWD.展开更多
The ethylene homopolymerization with new MgCl\-2\|supported bimetallic complex catalysts Ti(OBu)Cl\-3/Et(Ind)\-2ZrCl\-2 and Ti(OBu)Cl\-3/Cp\-2ZrCl\-2 was studied.The catalyst systems show high activity and the polyeth...The ethylene homopolymerization with new MgCl\-2\|supported bimetallic complex catalysts Ti(OBu)Cl\-3/Et(Ind)\-2ZrCl\-2 and Ti(OBu)Cl\-3/Cp\-2ZrCl\-2 was studied.The catalyst systems show high activity and the polyethylene with broad molecular weight distribution(MWD) was produced.The MgCl\-2\|supported bimetallic complex catalysts contain traditional Z\|N catalyst and movel metallocenes.Two active sites of Ti and Zr have different chain propagation,transfer,termination rate constant of olefin polymerization and bimodal and trimodal MWD polyethylene was produced.Molecular weiht distribution can be regulated easily by varying polymerzation conditions for improved processability and mechanical properties.Molecular weight,molecular weight distribution, T \-m and crystallinity were measured by GPC and DSC.展开更多
文摘The effect of chemical composition of highly active supported Ziegler-Natta catalysts with controlled morphology on the MWD of PE has been studied.It was shown the variation of transition metal compound in the MgCl_2-supported catalyst affect of MWD of PE produced in broad range:Vanadium-magnesium catalyst(VMC)produce PE with broad and bimodal MWD(M_w/M_n=14-21).MWD of PE,produced over titanium-magnesium catalyst(TMC)is narrow or medium depending on Ti content in the catalyst(M_w/M_n=3.1-4.8).The oxidation ...
文摘The viscoelastic behavior of isotactic polypropylene with ultra-high molecular weight(UHPPH) and broad molecular weight distribution(MWD), produced in the presence of Ziegler-Natta catalyst, was investigated by means of oscillatory rheometry at 180 and 200 ℃, whose loss modulus(G″) plots at 180 and 200 ℃ versus the natural logarithm of angular frequency(ω) present a pronounced maximum at 34.35 and 69.21 rad/s, respectively, and do not show a maximum peak at 0.01-100 rad/s for Ziegler-Natta catalyzing ethylene-propylene random copolymerization(PPR) with a conventional molecular weight and broad MWD. The fact indicates that the high molecular weight is responsible for a maximum peak of G″(ω) vs. lnω curves for UHPPH. This makes it possible to determine the plateau modulus(G 0_N) of UHPPH from a certain experimental temperature G″(ω) curve directly. For UHPPH, the G 0_N determined to be 4.28×10 5 and 3.62×10 5 Pa at 180 and 200 ℃, respectively, decreases with the increase of temperature and is independent of the molecular weight, which directly confirms reputation theoretical prediction that the G 0_N has no relation to the molecular weight.
基金the National Natural Science Foundation of China(No.21174011)the Natural Science Foundation of Beijing,(No.2102036)the PetroChina Innovation Fund(Grant No.2011D-5006-0502)
文摘Two kinds of cycloalkoxy silane compounds were synthesized and used as the internal electron donors （IEDs） of supported Ziegler-Natta catalyst for ethylene polymerization to produce polyethylene with broader molecular weight distribution （MWD）, The effect of the structure and the amount of these IEDs on the polymerization performance was in- vestigated. The results implied that the molecular weight distribution of the obtained polyethylene could be adjusted by the incorporation of IEDs. SEM result showed that the morphology of catalyst particle was spherical and uniform in size distribution. The titanium content of these catalysts was higher, the active TiCl4 species were easily anchored on the support than that without adding IED, which was determined by ICE The GPC result confirmed that the polyethylene with broader molecular weight distribution in the range of from 23.4 to 25.6 was obtained using triethoxy-（-cyclopentyloxy）-silane （ED1） and triethoxy-（-cyclohexyloxyl）- silane （ED2） as the internal electron donors.
基金supported by the National Natural Science Foundation of China(Nos.50525311,20734006 and 50621302)
文摘Mesoporous silica （MS）, 3-aminopropyltriethoxysilane （APTES） modified mesoporous silica （AMS）, bis（3- trimethoxysilylpropyl）amine modified mesoporous silica （BAMS） and APTES modified solid spherical silica （AS） were prepared and used to immobilize metallocene catalysts for ethylene polymerization. Gel permeation chromatography results showed that polyethylenes （PEs） catalyzed by AMS （or BAMS） supported metallocene catalysts at the molar ratios of Al/Zr = 100, 300 and 500 were of bimodal molecular weight distribution （BMWD）; while PEs catalyzed by the above catalysts at the molar ratios of Al/Zr 〉 800 were of monomodal molecular weight distribution （MMWD）. However, MS （or AS） supported metallocene catalysts could only produce PEs with MMWD in spite of the molar ratio of Al/Zr. It was because that AMS （or BAMS） supported catalysts possessed two active sites for ethylene polymerization at low molar ratios of Al/Zr due to the combination effects of mesopore geometrical constraint and amino groups of the supports, which was confirmed by X-ray photoelectron spectroscopy. This brings forward a novel and easy method for the synthesis of polyolefin with BMWD.
文摘The ethylene homopolymerization with new MgCl\-2\|supported bimetallic complex catalysts Ti(OBu)Cl\-3/Et(Ind)\-2ZrCl\-2 and Ti(OBu)Cl\-3/Cp\-2ZrCl\-2 was studied.The catalyst systems show high activity and the polyethylene with broad molecular weight distribution(MWD) was produced.The MgCl\-2\|supported bimetallic complex catalysts contain traditional Z\|N catalyst and movel metallocenes.Two active sites of Ti and Zr have different chain propagation,transfer,termination rate constant of olefin polymerization and bimodal and trimodal MWD polyethylene was produced.Molecular weiht distribution can be regulated easily by varying polymerzation conditions for improved processability and mechanical properties.Molecular weight,molecular weight distribution, T \-m and crystallinity were measured by GPC and DSC.
