不同水文模型在Broken流域的比较研究

流域水文模型对流域产汇流计算、洪水分析与预报以及水资源优化配置与调度等具有重大意义.本文选用三种比较常见的流域水文模型,介绍了各模型的结构、计算过程、应用范围等;随后将三个模型运用在澳大利亚Broken流域并且利用1966—1995年的日降雨、径流和蒸散发数据进行降雨产流分析.结果表明:Nash-Sutcliffe的效率系数均达到了80%以上,径流总量相对误差系数RE对于萨克拉门托模型和SIMHYD模型均在10%以内,而Tank模型的检验期超出了10%.通过对三个模型运用结果的分析和比较,SIMHYD模型是适合于该流域的最理想的流域水文模型.

Development and application of novel high‐efficiency composite ultrafine cement grouts for roadway in fractured surrounding rocks

The fractured surrounding rocks of roadways pose major challenges to safe mining.Grouting has often been used to reinforce the surrounding rocks to mitigate the safety risks associated with fractured rocks.The aim of this study is to develop highly efficient composite ultrafine cement(CUC)grouts to reinforce the roadway in fractured surrounding rocks.The materials used are ultrafine cement(UC),ultrafine fly ash(UF),ultrafine slag(US),and additives(superplasticizer[SUP],aluminate ultrafine expansion agent[AUA],gypsum,and retarder).The fluidity,bleeding,shrinkage,setting time,chemical composition,microstructure,degree of hydration,and mechanical property of grouting materials were evaluated in this study.Also,a suitable and effective CUC grout mixture was used to reinforce the roadway in the fractured surrounding rock.The results have shown that the addition of UF and US reduces the plastic viscosity of CUC,and the best fluidity can be obtained by adding 40%UF and 10%US.Since UC and UF particles are small,the pozzolanic effect of UF promotes the hydration reaction,which is conductive to the stability of CUC grouts.In addition,fine particles of UC,UF,and US can effectively fill the pores,while the volumetric expansion of AUA and gypsum decreases the pores and thus affects the microstructure of the solidified grout.The compressive test results have shown that the addition of specific amounts of UF and US can ameliorate the mechanical properties of CUC grouts.Finally,the CUC22‐8 grout was used to reinforce the No.20322 belt roadway.The results of numerical simulation and field monitoring have indicated that grouting can efficaciously reinforce the surrounding rock of the roadway.In this research,high‐performance CUC grouts were developed for surrounding rock reinforcement of underground engineering by utilizing UC and some additives.

The Application of "Broken Window Theory" to College's Daily Management

The daily management of college on the one hand is to constrain the action of students to achieve the maintenance of school's order and on the other hand is to help students develop good habits and remold certain concepts of laws,morality and discipline to finally achieve the goal of education.This paper employed a famous theory of management,that is,the"broken win dow theory"in the research and finally concluded that the application of"broken window theory"in the daily management of colleges can immediately and effectively prevent some of students'bad behaviors and habits from being spread.

The Application of“Broken Window Theory”to College's Daily Management

The daily management of college on the one hand is to constrain the action of students to achieve the maintenance of school's order and on the other hand is to help students develop good habits and remold certain concepts of laws, morality and discipline to finally achieve the goal of education. This paper employed a famous theory of management, that is, the"broken window theory"in the research and finally concluded that the application of"broken window theory"in the daily management of colleges can immediately and effectively prevent some of students'bad behaviors and habits from being spread.

Reconstruction of broken Si–O–Si bonds in iron ore tailings (IOTs) in concrete

This paper reports a study on the reconstruction of broken Si O Si bonds in iron ore tailings (IOTs) in concrete. Limestone and IOTs were used to investigate the influence of different types of coarse aggregates on the compressive strengths of concrete samples. The dif- ferences in interfacial transition zones (ITZs) between aggregate and paste were analyzed by scanning electron microscopy (SEM) and ener- gy-dispersive spectroscopy (EDS). Meanwhile, X-ray diffraction (XRD) and infrared spectroscopy (IR) were used to study microscopic changes in limestone and IOTs powders in a simple alkaline environment that simulated cement. The results show that the compressive strengths of IOTs concrete or paste are higher than those of limestone concrete or paste under identical conditions. The Ca/Si atom ratios in the ITZs of IOTs con- crete samples are lower than those of limestone concrete;the diffraction peak of the calcium silicate phase at 2θ = 29.5°, as well as the bands of Si O bonds shifting to lower wavenumbers, indicates reconstruction of the broken Si-O-Si bonds on the surfaces of IOTs with Ca(OH)2.

Discrete element modeling of ice loads on ship hulls in broken ice fields

Ice loads on a ship hull affect the safety of the hull structure and the ship maneuvering performance in ice-covered regions. A discrete element method （DEM） is used to simulate the interaction between drifting ice floes and a moving ship. The pancake ice floes are modelled with three-dimensional （3-D） dilated disk elements considering the buoyancy, drag force and additional mass induced by the current. The ship hull is modelled with 3D disks with overlaps. Ice loads on the ship hull are determined through the contact detection between ice floe element and ship hull element and the contact force calculation. The influences of different ice conditions （current velocities and directions, ice thicknesses, concentrations and ice floe sizes） and ship speeds are also examined on the dynamic ice force. The simulated results are compared qualitatively well with the existing field data and other numerical results. This work can be helpful in the shil3 structure design and the navigation securitv in ice-covered fields.

Online Detection of Broken Rotor Bar Fault in Induction Motors by Combining Estimation of Signal Parameters via Min-norm Algorithm and Least Square Method

Current research in broken rotor bar （BRB） fault detection in induction motors is primarily focused on a high-frequency resolution analysis of the stator current. Compared with a discrete Fourier transformation, the parametric spectrum estimation technique has a higher frequency accuracy and resolution. However, the existing detection methods based on parametric spectrum estima- tion cannot realize online detection, owing to the large computational cost. To improve the efficiency of BRB fault detection, a new detection method based on the min-norm algorithm and least square estimation is proposed in this paper. First, the stator current is filtered using a band-pass filter and divided into short overlapped data windows. The min-norm algorithm is then applied to determine the fre- quencies of the fundamental and fault characteristic com- ponents with each overlapped data window. Next, based on the frequency values obtained, a model of the fault current signal is constructed. Subsequently, a linear least squares problem solved through singular value decomposition is designed to estimate the amplitudes and phases of the related components. Finally, the proposed method is applied to a simulated current and an actual motor, the results of which indicate that, not only parametric spectrum estimation technique.

Fractal Characteristics and Fractal Dimension Measurement on Broken Surfaces of Aluminum Electric Porcelain

The characteristics of broken surfaces were r esearched by a scanning electron microscope (SEM) and a reflection microscope, a nd the fractal dimensions of broken surfaces were measured by the Slit Island me thod. The experimental results indicate that the broken surface of aluminum elec tric porcelain is a fractal body in statistics, and the fractal dimensions of br oken surfaces are different with the different amplification multiple value.In a ll of measured fractal dimensions,both of values measured in 100× under reflect ion microscope and in 500× under SEM are maximum, whereas the values measur ed in 63× under reflection microscope and in 2000× under SEM are obviously min imum. The fractal dimensions of broken surfaces are also affected by the degrees of gray comparison and the kinds of measuring methods. The relationships betwee n the fractal dimensions of broken surfaces and porcelain bend strengths are tha t they are in positive correlation on the low multiples and in negative correlat ion on the high multiples.

Friction factor correlation for airflow through broken rocks and its applications in mine ventilation

The Atkinson equation along with its friction factor is commonly used to estimate pressure requirement in mine ventilation.However,friction factor correlation of flow through broken rock,typically found in blasted stope,gob,rock pit or block caving rock deposits,etc.,is currently unavailable.Also,it is impractical to conduct direct measurements of flow resistance in an inaccessible broken rock zone.This paper aims to develop a new friction factor correlation of flow through broken rock that can be used directly in Atkinson equation.The proposed correlation is valid for broken rocks with diameter between 0.04 and 1.2 m and porosity ranging from 0.23 to 0.7.

IBPSO-Based MUSIC Algorithm for Broken Rotor Bars Fault Detection of Induction Motors

In spectrum analysis of induction motor current, the characteristic components of broken rotor bars（BRB） fault are often submerged by the fundamental component. Although many detection methods have been proposed for this problem, the frequency resolution and accuracy are not high enough so that the reliability of BRB fault detection is a ected. Thus, a new multiple signal classification（MUSIC） algorithm based on particle swarm intelligence search is developed. Since spectrum peak search in MUSIC is a multimodal optimization problem, an improved bare?bones particle swarm optimization algorithm（IBPSO） is proposed first. In the IBPSO, a modified strategy of subpopulation determination is introduced into BPSO for realizing multimodal search. And then, the new MUSIC algorithm, called IBPSO?based MUSIC, is proposed by replacing the fixed?step traversal search with IBPSO. Meanwhile, a simulation signal is used to test the e ectiveness of the proposed algorithm. The simulation results show that its frequency precision reaches 10-5, and the computational cost is only comparable to that of traditional MUSIC with 0.1 search step. Finally, the IBPSO?based MUSIC is applied in BRB fault detection of an induction motor, and the e ectiveness and superiority are proved again. The proposed research provides a modified MUSIC algorithm which has su cient frequency precision to detect BRB fault in induction motors.

Time effect and prediction of broken rock bulking coefficient on the base of particle discrete element method

Bulking characteristics of gangue are of great significance for the stability of goafs in mining overburden in the caving zones.In this paper,a particle discrete element method with clusters to represent gangue was adopted to explore the bulking coefficient time effect of the broken rock in the caving zone under three-dimensional triaxial compression condition.The phenomena of stress corrosion,deformation,and failure of rock blocks were simulated in the numerical model.Meanwhile,a new criterion of rock fragments damage was put forward.It was found that the broken rock has obvious viscoelastic properties.A new equation based on the Burgers creep model was proposed to predict the bulking coefficient of broken rock.A deformation characteristic parameter of the prediction equation was analyzed,which can be set as a fixed value in the mid-and long-term prediction of the bulking coefficient.There are quadratic function relationships between the deformation characteristic parameter value and Talbot gradation index,axial pressure and confining pressure.

Extraordinary transmission and reflection in PT-symmetric two-segment-connected triangular optical waveguide networks with perfect and broken integer waveguide length ratios

By adjusting the waveguide length ratio, we study the extraordinary characteristics of electromagnetic waves propagating in one-dimensional(1D) parity-time-symmetric(PT-symmetric) two-segment-connected triangular optical waveguide networks with perfect and broken integer waveguide length ratios respectively. It is found that the number and the corresponding frequencies of the extremum spontaneous PT-symmetric breaking points are dependent on the waveguide length ratio. Near the extremum breaking points, ultrastrong extraordinary transmissions are created and the maximal can arrive at, respectively, 2.4079 × 10^14 and 4.3555 × 10^13 in both kinds of networks. However, bidirectional invisibility can only be produced by the networks with broken integer waveguide length ratio, whose mechanism is explained in detail from the perspective of photonic band structure. The findings of this work can be useful optical characteristic control in the fabrication of PT-symmetric optical waveguide networks, which possesses great potential in designing optical amplifiers,optical energy saver devices, and special optical filters.

Broken Rotor Bar Fault Detection of Induction Motors Using a Joint Algorithm of Trust Region and Modified Bare-bones Particle Swarm Optimization

A precise detection of the fault feature parameter of motor current is a new research hotspot in the broken rotor bar(BRB) fault diagnosis of induction motors. Discrete Fourier transform(DFT) is the most popular technique in this field, owing to low computation and easy realization. However, its accuracy is often limited by the data window length, spectral leakage, fence e ect, etc. Therefore, a new detection method based on a global optimization algorithm is proposed. First, a BRB fault current model and a residual error function are designed to transform the fault parameter detection problem into a nonlinear least-square problem. Because this optimization problem has a great number of local optima and needs to be resolved rapidly and accurately, a joint algorithm(called TR-MBPSO) based on a modified bare-bones particle swarm optimization(BPSO) and trust region(TR) is subsequently proposed. In the TR-MBPSO, a reinitialization strategy of inactive particle is introduced to the BPSO to enhance the swarm diversity and global search ability. Meanwhile, the TR is combined with the modified BPSO to improve convergence speed and accuracy. It also includes a global convergence analysis, whose result proves that the TR-MBPSO can converge to the global optimum with the probability of 1. Both simulations and experiments are conducted, and the results indicate that the proposed detection method not only has high accuracy of parameter estimation with short-time data window, e.g., the magnitude and frequency precision of the fault-related components reaches 10^(-4), but also overcomes the impacts of spectral leakage and non-integer-period sampling. The proposed research provides a new BRB detection method, which has enough precision to extract the parameters of the fault feature components.

Characteristics of Scour and Deposition in Front of Breakwaters Under Irregular Broken Clapotis

First the scour and deposition patterns of the sandy seabed in front of a vertical breakwater under the action of irregular broken clapotis are investigated experimentally and classified into five types: scour typeⅠ, scour typeⅡ, scour type Ⅲ, deposition typeⅠ, and deposition typeⅡ. Secondly, the processes of formation of scour and deposition patterns are probed in comparison with those induced by regular broken clapotis and standing waves. Thirdly, the criteria for distinguishing scour and deposition patterns under irregular broken clapotis are presented.

Bruch's membrane opening-minimum rim width and visual field loss in glaucoma:a broken stick analysis

AIM：To determine the Bruch＇s membrane opening-minimum rim width（BMO-MRW） tipping point where corresponding visual field（VF） damages become detectable.METHODS：A total of 85 normal subjects and 83 glaucoma patients（one eye per participant） were recruited for the study.All of the patients had VF examinations and spectral-domain optical coherence tomography to measure the BMO-MRW.Total deviation values for 52 VF points were allocated to the corresponding sector according to the Garway-Heath distribution map.To evaluate the relationship between VF loss and BMOMRW measurements,a ＂broken-stick＂ statistical model was used.The tipping point where the VF values started to sharply decrease as a function of BMO-MRW measurements was estimated and the slopes above and below this tipping point were compared.RESULTS：A 25.9% global BMO-MRW loss from normative value was required for the VF loss to be detectable.Sectorally,substantial BMO-MRW thinning in inferotemporal sector（33.1%） and relatively less BMO-MRW thinning in the superotemporal sector（8.9%） were necessary for the detection of the VF loss.Beyond the tipping point,the slopes were close to zero throughout all of the sectors and the VF loss was unrelated to the BMO-MRW loss.The VF loss was related to the BMO-MRW loss below the tipping point.The difference between the two slopes was statistically significant（P≤0.002）.CONCLUSION：Substantial BMO-MRW loss appears to be necessary for VF loss to be detectable in patients with open angle glaucoma with standard achromatic perimetry.

A New Variational Formulation for a Kind of Reaction-diffusion Problem in Broken Sobolev Space

In this paper, a new variational formulation for a reaction-diffusion problem in broken Sobolev space is proposed. And the new formulation in the broken Sobolev space will be proved that it is well-posed and equivalent to the standard Galerkin variational formulation. The method will be helpful to easily solve the original partial differential equation numerically. And the method is novel and interesting, which can be used to deal with some complicated problem, such as the low regularity problem, the differential-integral problem and so on.

Surgical Management for a Broken Delivery Shaft in <i>Vivo</i>during PCI Following Acute Myocardial Infarction in a Complex LAD Artery Lesion: A Case Report and Literature Review

Stuck up and fracture of coronary angioplasty hardware are unwonted complications of percutaneous coronary interventions (PCI) for which surgical retrieval and management is once in a while required. We present one case of a 59-year-old diabetic, a hypertensive gentleman who attended the emergency room (ER) with central chest pain for 2 hours. After evaluation of the patient by physical and noninvasive diagnostic tests, he was diagnosed as a case of acute myocardial infarction (AMI) with stable hemodynamic. For the aforementioned findings, the patient was treated first with a thrombolytic agent in ER and then shifted to Cardiology Department for monitoring and further coronary evaluation by coronary angiography (CAG). CAG revealed essentially single vessel disease (SVD) with complex left anterior descending (LAD) artery lesion, so PCI was attempted but failed with an unfortunate incidence of the broken delivery shaft and left in vivo. Immediate decision making and surgical management for retrieval of lost angioplasty device and correction coronary lesion with revascularization save the patient from grave complication. All the series of events and management approaches of this very complex coronary artery lesion are discussed in this article.

Microelements Distribution in Sulfides from Black Smokers of Hydrothermal Vent Field Broken Spur(MAR)

Numerous investigations on submarine hydrothermal ore-forming occurrence have been actively carried out in the last two decades with significant results.The Ag and Au enrichments in the sulfides from black smokers ofhydrothermal vent field Broken Spur(MAR) aroused our interest to study their mineral hosting forms.Samples were collected from seven hydrothermal chimneys within Broken Spur in the British-Russian BRAVEX(1994) and

Application of Directional Broken Control Blasting in Cutting

Based on experiments in lab, this paper analyzes the mechanism of directional broken controlled blasting and applies the technology to the cutting by utilizing its characteristic. The model cutting experiment and the practical application result show that the cutting blasting technology is an effective way.

Gauge Transformation and Vacuum Broken

篢hrough the discussion of the SU (2) group, a particular gauge transformation equation is introduced to prove that use of different gauge transformation methods may lead to vacuum broken of different components in a scalar field. It is pointed out that the arbitrary nature of the selected vacuum state may be attributed to gauge invariance.