适合宽带无线网络的Bunched系统

Bunched系统由多个远端天线单元(RAU)和一个中心单元(CU)构成,可以有效地提高WiMAX等未来宽带无线网络的频谱利用率,能很好地解决热点地区覆盖问题。介绍了Bunched系统的结构,描述了其系统的特点和优点,分析了需要解决的关键技术。

Space Charge Effect of Bunched Beam With Gaussian Distribution

The nonlinear space charge effect of a bunched beam with Gaussian distribu-tion in the longitudinal direction is discussed.Some useful formulae are derived for cal-culating the potential induced by a cylinder model of space charge in the waveguide of alinac with different combinations of density distribution:Gaussian distribution in thelongitudinal direction versus Kapchinskij Vladimirskij,waterbag,parabolic andGaussian distribution in the transverse direction,rcspectively.

Preparation of bunched CeO_(2) and study on microwave absorbing properties with MWCNTs binary composite

A novel bunched cerium oxide(CeO_(2))was prepared and its binary composite material with multi-walled carbon nanotubes presented an excellent microwave absorbing properties.The morphology,structure,and absorbing properties of the composite material were investigated.It was found that the minimum reflection loss(RL)of the composite material at 15.79 GHz was−45.7 dB when the thickness was 5.5 mm.It was worth noting that when the composite material was in the thickness range of 5.0-7.5 mm and the frequency was 11.36-17.77 GHz,the electromagnetic wave RL was<−30 dB,which illustrated that the composite material had a good absorbing effect over a wide thickness range.The results of the study contributed to the design and preparation of efficient microwave absorbing materials(MAM)with rare earth oxide composites and their applications,which demonstrated the importance of new composites with special structures in the field of MAM.

Determining beam transverse absolute position by triangulation of multi-electrode signal phase differences

Accurate measurement of the transverse position of a beam is crucial in particle accelerators because it plays a key role in determining the beam parameters.Existing methods for beam-position measurement rely on the detection of image currents induced on electrodes or narrow-band wake field induced by a beam passing through a cavity-type structure.However,these methods have limitations.The indirect measurement of multiple parameters is computationally complex,requiring external calibration to determine the system parameters in advance.Furthermore,the utilization of the beam signal information is incomplete.Hence,this study proposes a novel method for measuring the absolute electron beam transverse position.By utilizing the geometric relationship between the center position of the measured electron beam and multiple detection electrodes and by analyzing the differences in the arrival times of the beam signals detected by these electrodes,the absolute transverse position of the electron beam crossing the electrode plane can be calculated.This method features absolute position measurement,a position sensitivity coefficient independent of vacuum chamber apertures,and no requirement for a symmetrical detector electrode layout.The feasibility of this method is validated through numerical simulations and beam experiments.

Ultrahigh spatiotemporal resolution beam signal reconstruction with bunch phase compensation

Various electromagnetic signals are excited by the beam in the acceleration and beam-diagnostic elements of a particle accelerator.It is important to obtain time-domain waveforms of these signals with high temporal resolution for research,such as the study of beam–cavity interactions and bunch-by-bunch parameter measurements.Therefore,a signal reconstruction algorithm with ultrahigh spatiotemporal resolution and bunch phase compensation based on equivalent sampling is proposed in this paper.Compared with traditional equivalent sampling,the use of phase compensation and setting the bunch signal zero-crossing point as the time reference can construct a more accurate reconstructed signal.The basic principles of the method,simulation,and experimental comparison are also introduced.Based on the beam test platform of the Shanghai Synchrotron Radiation Facility(SSRF)and the method of experimental verification,the factors that affect the reconstructed signal quality are analyzed and discussed,including the depth of the sampled data,quantization noise of analog-to-digital converter,beam transverse oscillation,and longitudinal oscillation.The results of the beam experiments show that under the user operation conditions of the SSRF,a beam excitation signal with an amplitude uncertainty of 2%can be reconstructed.

Oil Palm Fiber Hybrid Composites: A Recent Review

Composite materials from oil palmfiber enhance sustainability by utilizing renewable resources,reducing depen-dence on non-renewable materials,and lessening environmental impact.Despite their mechanical and dimen-sional stability limitations,oil palmfiber-based polymer composites offer significant advantages,such as natural abundance,potential weight reduction,and cost-effectiveness due to local availability and renewability.The growing interest in oil palm hybrid composites,made from blending differentfibers,is due to their custo-mizable mechanical and physical properties.Hybridization is one of the most effective methods to reinforce and improve the performance of oil palm-derived composite materials.This review investigates the structural qualities of hybrid composites made from oil palmfibers,their suitability for diverse applications,and recent advancements in thefield.By focusing on the availability,properties,applications,challenges,and future direc-tions of oil palmfiber hybrid composites,this review highlights the potential of these materials to enhance mechanical and functional properties,thereby contributing to sustainable development and innovation in com-posite materials.

Enhanced terahertz generation via plasma modulation on two bunches

Terahertz(THz)radiation finds important applications in various fields,making the study of THz sources significant.Among different approaches,electron accelerator-based THz sources hold notable advantages in generating THz radiation with narrow bandwidth,high brightness,high peak power,and high repetition rate.To further improve the THz radiation energy,the bunching factor of the free electron bunch train needs to be increased.We propose and numerically reveal that,by adding an additional short-pulse drive beam before the main beam as the excitation source of nonlinear plasma wake,the bunching factor of the main beam can be further increased to∼0.94,even though with a relatively low charge,low current,and relatively diffused electron beam.Two such electron beams with loose requirements can be easily generated using typical photoinjectors.Our work provides a way for a new THz source with enhanced radiation energy.

Factors affecting headway regularity on bus routes

The common phenomenon of uneven headway in bus service is explored based on the automatic vehicle location （AVL） data of Route 2 in Yichun City of Jiangxi province from 6：00 to 9：00 in the morning. The headway regularity of two stages 6： 00--7：00 and 7： 00--9：00 is comparatively analyzed, and it is found that both the traffic conditions and the passenger demand affect headway regularity. A bus arrival model, which assumes that the dwell time of a bus is linear in headway, is built to probe the effect of scheduled headway, and the model is simulated by Matlab. The simulation results reveal that the departure intervals and fluctuations affect headway regularity. Longer intervals and less fluctuation mean higher regularity of headway. And, the fluctuation has a more obvious influence on headway regularity than the interval. Controlling the fluctuations of scheduled headway can effectively raise the regularity of headway and improve the level of public transport service.

Effects of Water-permeability Plastic Film Mulching plus Bunch Planting on Root and Yield of Foxtail Millet

Effects of water-permeability plastic film plus bunch planting on root growth and development and yield of foxtail millet were studied by randomized block design. The results showed that water-permeability plastic film mulching plus bunch planting had a significant promoting effect on root growth and development and yield of foxtail millet. Compared with the CK, the total root length, total surface area, total root volume and number of. root tips increased by 51.30%, 47.89%, 48.39% and 41.63%, respectively. The yield increased by 48.57%, and there was significant positive correlation between root length, total surface area, total volume, number of root tips and dry matter weight of roots with yield. Developed roots are the main reason for the yield increasing effect of water-permeability plastic film mulching plus bunch planting.

Numerical simulation for space charge dominated beam transport

To simulate the intense bunched beam transport, a computer program LEADS-3D has been developed. The particle trajectories are analysed with the Lie algebraic method. The third order approximation of the trajectory solutions is made with space charge forces off, and the second order approximation is made with space charge forces on. The particle distribution in the 3D ellipsoid is uniform or Gaussian. Most of the conventional beam optical elements are incorporated in the code. The optimization procedures are provided to fit the beam lines to satisfy the given optical conditions.

Statistical optimization of adsorption processes for removal of 2,4-dichlorophenol by activated carbon derived from oil palm empty fruit bunches

The adsorption capacity of activated carbon produced from oil palm empty fruit bunches through removal of 2,4-dichlorophenol from aqueous solution was carried out in the laboratory. The activated carbon was produced by thermal activation of activation time with 30 min at 800℃. The adsorption process conditions were determined with the statistical optimization followed by central composite design. A developed polynomial model for operating conditions of adsorption process indicated that the optimum conditions for maximum adsorption of phenolic compound were： agitation rate of 100 r/min, contact time of 8 h, initial adsorbate concentration of 250 mg/L and pH 4. Adsorption isotherms were conducted to evaluate biosorption process. Langmuir isotherm was more favorable （R^2=0.93） for removal of 2,4-dichlorophenol by the activated carbon rather than Freundlich isotherm （R^2=0.88）.

Electron Acceleration in the Cone-shaped Extra-intense Stationary Laser Field

A technique of electron acceleration in the cone shaped stationary laser field is proposed. An electron acceleration in this laser is studied, which shows that there is no electron bunching but there exists electron capture in this laser field.

Characteristics of terahertz coherent transition radiation generated from picosecond ultrashort electron bunches

This paper presents a method of generating terahertz （THz） coherent transition radiation （CTR） from picosecond ultrashort electron bunches including single and train bunches, which are produced by a photocathode radio frequency gun. The radiation characteristics of THz CTR including formation factor and energy spectrum are analysed in detail. With the help of a 2-dimensional particle-in-cell simulation, the radiation characteristics including power, energy and magnetic field are analysed. The results show that the radiation frequency can be adjusted by tuning the repetition frequency of the train bunch and the energy can be enhanced with the train bunches.

Improving supercritical water gasification of sludge by oil palm empty fruit bunch addition: Promotion of syngas production and heavy metal stabilization

The co-gasification of sewage sludge and palm oil empty fruit bunch(EFB) in supercritical water(SCW) was conducted at 400 °C with a pressure of over 25 MPa. This study aimed to investigate the influence of EFB addition on the syngas production and its composition. The heavy metal distribution and the leaching potential of the solid residue were also assessed. The results showed that syngas yield significantly increased with the addition of EFB into the feedstock. The cold gas efficiency(CGE) and carbon efficiency(CE) of co-gasification were higher than those of individual gasification. The actual syngas production from co-gasification of sludge and EFB was 45% higher than the theoretical total volume. The results indicated that the addition of EFB to sludge had the synergetic promotion effect on syngas production from sludge and EFB in supercritical water. This enhancement might be due to the dissolution of alkali metals from EFB and the adjustment of organic ratio. In addition, higher percentage of heavy metals were deposited and stabilized in the solid residue after SCWG. The leaching concentration of heavy metals from the solid residues was decreased to a level below the standard limit which enables it to be safely disposed of in landfill. In conclusion, the EFB addition has been proved to promote syngas production,as well as, stabilize the heavy metal in solid residues during co-SCWG.

Terahertz coherent transition radiation based on an ultrashort electron bunching beam

The experimental result of terahertz （THz） coherent transition radiation generated from an ultrashort electron bunching beam is reported. During this experiment, the window for THz transmission from ultrahigh vacuum to free air is tested. The compact measurement system which can simultaneously test the THz wave power and frequency is built and proofed. With the help of improved Martin-Puplett interferometer and Kramers-Krong transform, the longitudinal bunch length is measured. The results show that the peak power of THz radiation wave is more than 80 kW, and its radiation frequency is from 0.1 THz to 1.5 THz.

Removal of Cu(II), Pb(II) and Zn(II) Ions from Aqueous Solutions Using Selected Agricultural Wastes: Adsorption and Characterisation Studies

The feasibility of durian tree sawdust (DTS), coconut coir (CC) and oil palm empty fruit bunch (EFB) as low-cost biosorbents for the removal of Cu(II), Pb(II) and Zn(II) ions from aqueous solutions was investigated. The effects of solution pH and initial metal concentration on adsorption capacity were examined in batch experiments. The affinity and the adsorption capacity of DTS, CC and EFB were evaluated. The adsorption behaviour of Cu(II), Pb(II) and Zn(II) ions onto DTS, CC and EFB was described using Freundlich and Langmuir isotherm models. The separation factor (RL) analysis suggests that the removal of metal ions onto three agricultural wastes studied was favourable. The maximum adsorption capacities (Q) estimated from the Langmuir isotherm model for Cu(II), Pb(II) and Zn(II) were 18.42, 20.37 and 22.78 mg/g for DTS, 18.38, 37.04 and 24.39 mg/g for CC, and 26.95, 37.59 and 21.19 mg/g for EFB, respectively. The characterisation studies were carried out using Scanning Electron Microscope (SEM), Energy Dispersive X-ray Spectrometer (EDX) and Fourier Transform Infrared Spectrometer (FTIR). The surface morphology of the biosorbents changed significantly following interaction with metal ions. The primary adsorption mechanism was complexation between metal ions and binding sites of biosorbents. Both hydroxyl and amine groups are the main binding sites in DTS, CC and EFB.

Development of readout electronics for bunch arrival-time monitor system at SXFEL

A bunch arrival-time monitor(BAM) system,based on electro-optical intensity modulation scheme, is under study at Shanghai Soft X-ray Free Electron Laser.The aim of the study is to achieve high-precision time measurement for minimizing bunch fluctuations. A readout electronics is developed to fulfill the requirements of the BAM system. The readout electronics is mainly composed of a signal conditioning circuit, field-programmable gate array(FPGA), mezzanine card(FMC150), and powerful FPGA carrier board. The signal conditioning circuit converts the laser pulses into electrical pulse signals using a photodiode. Thereafter, it performs splitting and low-noise amplification to achieve the best voltage sampling performance of the dual-channel analog-to-digital converter(ADC) in FMC150. The FMC150 ADC daughter card includes a 14-bit 250 Msps dual-channel high-speed ADC,a clock configuration, and a management module. The powerful FPGA carrier board is a commercial high-performance Xilinx Kintex-7 FPGA evaluation board. To achieve clock and data alignment for ADC data capture at a high sampling rate, we used ISERDES, IDELAY, and dedicated carry-in resources in the Kintex-7 FPGA. This paper presents a detailed development of the readout electronics in the BAM system and its performance.

Preliminary study on detection and cleaning of parasitic bunches

To establish a nuclear resonant scattering beamline at the High Energy Photon Source(HEPS),it is essential to develop tools for detection and cleaning of parasitic bunches,for meeting the stringent demands on bunch purity.To this end,a novel time-correlated single-photon counting system was implemented at the electron storage ring of the Beijing Electron–Positron Collider II(BEPCII).The purity deterioration process over a week-long operation was recorded by the system.In this study,the mechanism of impurity growth was analyzed by numerical methods and validated on measurements.The agreement between the experimental results and the cal-culation was fairly good.Two main sources of parasitic bunches,pre-accelerators and the Touschek scattering were confirmed.A bunch-cleaning technique,based on a sinu-soidal signal mixed with a pseudo-square wave,was also developed and implemented,and its capability to improve the bunch purity to the level of 10–7 was experimentally demonstrated.We present the experimental setup,princi-ple,and measurement results of a system for detection and cleaning of parasitic bunches.

Progress in particle-beam-driven inertial fusion research: Activities in Japan

Research activities in Japan relevant to particle beam inertial fusion are briefly reviewed.These activities can be ascended to the 1980s.During the past three decades,significant progress in particle beam fusion,pulsed power systems,accelerator schemes for intense beams,target physics,and high-energy-density physics research has been made by a number of research groups at universities and accelerator facilities in Japan.High-flux ions have been extracted from laser ablation plasmas.Controllability of the ion velocity distribution in the plasma by an axial magnetic and/or electric field has realized a stable high-flux low-emittance beam injector.Beam dynamics have been studied both theoretically and experimentally.The efforts have been concentrated on the beam behavior during the final compression stage of intense beam accelerators.A novel accelerator scheme based on a repetitive induction modulator has been proposed as a cost-effective particle-beam driver scheme.Beam-plasma interaction and pulse-powered plasma experiments have been investigated as relevant studies of particle beam inertial fusion.An irradiation method to mitigate the instability in imploding target has been proposed using oscillating heavy-ion beams.The new irradiation method has reopened the exploration of direct drive scheme of particle beam fusion.

Development of a control system for the fourth-harmonic cavity of the HLS storage ring

Harmonic RF cavities are commonly used in storage rings to lengthen the bunches and thus suppress the beam's instabilities and increase its Touschek lifetime. The voltage and phase of the electromagnetic fields in the harmonic cavity are of great importance for stretching the bunch. In the Hefei Light Source storage ring, a passive fourth-harmonic cavity is installed, and the cavity is monitored and controlled by an analog control module provided by its manufacturer. To vary and maintain the voltage of the harmonic cavity in a more effective way, a digital proportional, integral, and derivative feedback system based on the Experimental Physics and Industrial Control System is developed on top of the analog control module. This paper reports the details of the development of this voltage control system. Some test and operational results are also presented.