Button cell batteries are used in clocks, thermometers, remote controls, toys and other devices, and they are usually discarded in the trash once its useful life is over. Some models of these batteries contain silver ...Button cell batteries are used in clocks, thermometers, remote controls, toys and other devices, and they are usually discarded in the trash once its useful life is over. Some models of these batteries contain silver oxide. In this paper we propose liquid-liquid extraction as separation process to recover the metal. First, silver determination is performed in different models of these batteries and leaching with nitric acid is carried out. Affinity study is done between several commercial extractants for silver. The best performing extractant is the bis(2-ethylhexyl) dithiophosphoric acid (D2EHDTPA). Furthermore, a study of the extraction yields as a function of extractant concentration and time is performed. The distribution isotherm is determined;complex extracted in organic phase and stripping conditions have been identified. With the aim of obtaining industrial application, a number of steps for a countercurrent process were defined by the McCabe-Thiele method. Finally, a study was done in micropilot scale. The results show that it is possible to recover silver from this type of waste.展开更多
Synthesis and characterization of a tri-layered solid electrolyte and oxygen permeable solid air cathode for lithium-air battery cells were carried out in this investigation. Detailed fabrication procedures for solid ...Synthesis and characterization of a tri-layered solid electrolyte and oxygen permeable solid air cathode for lithium-air battery cells were carried out in this investigation. Detailed fabrication procedures for solid electrolyte, air cathode and real-world lithium-air battery cell are described. Materials characterizations were performed through FTIR and TGA measurement. Based on the experimental four-probe conductivity measurement, it was found that the tri-layered solid electrolyte has a very high conductivity at room temperature, 23<sup>。</sup>C, and it can be reached up to 6 times higher at 100<sup>。</sup>C. Fabrication of real-world lithium-air button cells was performed using the synthesized tri-layered solid electrolyte, an oxygen permeable air cathode, and a metallic lithium anode. The lithium-air button cells were tested under dry air with 0.1 mA - 0.2 mA discharge/ charge current at elevated temperatures. Experimental results showed that the lithium-air cell performance is very sensitive to the oxygen concentration in the air cathode. The experimental results also revealed that the cell resistance was very large at room temperature but decreased rapidly with increasing temperatures. It was found that the cell resistance was the prime cause to show any significant discharge capacity at room temperature. Experimental results suggested that the lack of robust interfacial contact among solid electrolyte, air cathode and lithium metal anode were the primary factors for the cell’s high internal resistances. It was also found that once the cell internal resistance issues were resolved, the discharge curve of the battery cell was much smoother and the cell was able to discharge at above 2.0 V for up to 40 hours. It indicated that in order to have better performing lithium-air battery cell, interfacial contact resistances issue must have to be resolved very efficiently.展开更多
基金The authors wish to thank to DAIP of Universidad de Guanajuato for the financial support given to this projectand to Cytec,Canada Inc.,and to Rhein Chemie(Mannheim,Germany)for supplying the extractants.
文摘Button cell batteries are used in clocks, thermometers, remote controls, toys and other devices, and they are usually discarded in the trash once its useful life is over. Some models of these batteries contain silver oxide. In this paper we propose liquid-liquid extraction as separation process to recover the metal. First, silver determination is performed in different models of these batteries and leaching with nitric acid is carried out. Affinity study is done between several commercial extractants for silver. The best performing extractant is the bis(2-ethylhexyl) dithiophosphoric acid (D2EHDTPA). Furthermore, a study of the extraction yields as a function of extractant concentration and time is performed. The distribution isotherm is determined;complex extracted in organic phase and stripping conditions have been identified. With the aim of obtaining industrial application, a number of steps for a countercurrent process were defined by the McCabe-Thiele method. Finally, a study was done in micropilot scale. The results show that it is possible to recover silver from this type of waste.
文摘Synthesis and characterization of a tri-layered solid electrolyte and oxygen permeable solid air cathode for lithium-air battery cells were carried out in this investigation. Detailed fabrication procedures for solid electrolyte, air cathode and real-world lithium-air battery cell are described. Materials characterizations were performed through FTIR and TGA measurement. Based on the experimental four-probe conductivity measurement, it was found that the tri-layered solid electrolyte has a very high conductivity at room temperature, 23<sup>。</sup>C, and it can be reached up to 6 times higher at 100<sup>。</sup>C. Fabrication of real-world lithium-air button cells was performed using the synthesized tri-layered solid electrolyte, an oxygen permeable air cathode, and a metallic lithium anode. The lithium-air button cells were tested under dry air with 0.1 mA - 0.2 mA discharge/ charge current at elevated temperatures. Experimental results showed that the lithium-air cell performance is very sensitive to the oxygen concentration in the air cathode. The experimental results also revealed that the cell resistance was very large at room temperature but decreased rapidly with increasing temperatures. It was found that the cell resistance was the prime cause to show any significant discharge capacity at room temperature. Experimental results suggested that the lack of robust interfacial contact among solid electrolyte, air cathode and lithium metal anode were the primary factors for the cell’s high internal resistances. It was also found that once the cell internal resistance issues were resolved, the discharge curve of the battery cell was much smoother and the cell was able to discharge at above 2.0 V for up to 40 hours. It indicated that in order to have better performing lithium-air battery cell, interfacial contact resistances issue must have to be resolved very efficiently.
