Ni/Al_2O_3-SiO_2 catalysts were synthesized via one-step method employing SiO_2 as an additive for the selective hydrogenation of butyne-1,4-diol(B_3D) to butane-1,4-diol(B1D). The prepared catalysts were evaluated by...Ni/Al_2O_3-SiO_2 catalysts were synthesized via one-step method employing SiO_2 as an additive for the selective hydrogenation of butyne-1,4-diol(B_3D) to butane-1,4-diol(B1D). The prepared catalysts were evaluated by a series of characterization techniques including BET, XRD, SEM, EDX-mapping, TEM, H_2-TPR, XPS, NH_3-TPD and Py-FTIR. Compared to Ni/Al_2O_3 catalyst, the SiO_2-doped samples exhibited better B_3D conversion. SiO_2 could help to form a strong interaction between NiO with the support, which inhibited Ni agglomeration at high temperature, improved the Ni dispersion, and enhanced the hydrogenation activity. B_1D selectivity was mainly influenced by the quantity of Lewis acid sites in addition to the Ni dispersion. The catalyst with a silica loading of 6.4% demonstrated an excellent selectivity of 75.18%(by 13% higher than the contrastive Ni/Al_2O_3 catalyst), which was attributed to the larger amount of Lewis acid sites and the moderate interaction between NiO with the support, which could facilitate the nickel dispersion on a preferable surface area of 176.3 m^2/g of support.展开更多
The effect of 2-butyne-1, 4-diol （BD） on the deposition behavior of the Co-Ni alloy was investigated by linear sweep voltammetry. The results showed that BD could prevent the deposition of the Co-Ni alloy. The effec...The effect of 2-butyne-1, 4-diol （BD） on the deposition behavior of the Co-Ni alloy was investigated by linear sweep voltammetry. The results showed that BD could prevent the deposition of the Co-Ni alloy. The effect of BD concentration in the sulfate plating bath, on the structure of the Co-Ni deposit was studied by energy dispersive x-ray spectroscopy, scanning electron microscope, and X-ray diffraction, respectively. As a result, BD could smoothen the deposit surface and decrease the diameter of the grain, but too much of BD was not good for the size of the grain. In general, a hexagonal close-packed （hcp） phase of the Co-Ni alloy, with a preferentially oriented （110） plane, was prepared by electrodeposition in the presence of BD. The Co-Ni alloy as a catalyst for the electro-oxidation of ethanol in alkaline medium was investigated by cyclic voltammetry. The deposit plated from the bath containing BD possessed better electro-oxidation of ethanol performance compared with that of the deposit plated from only the sulfate plating bath, but too much of BD was not beneficial for catalytic activity. The Co-Ni film was suitable as a magnetic recording material.展开更多
The effect of 2-butyne-1, 4-diol on silver electrodeposition process from 5, 5-dimethyl hydantoin solutions was investigated by means of cyclic voltammetric measurement, scanning electron microscopy (SEM) and X-ray di...The effect of 2-butyne-1, 4-diol on silver electrodeposition process from 5, 5-dimethyl hydantoin solutions was investigated by means of cyclic voltammetric measurement, scanning electron microscopy (SEM) and X-ray diffraction (XRD). Cyclic voltammetric studies indicate that the reduction process of silver electrodeposition is influenced by adding 2-butyne-1, 4-diol. Owing to its adsorption on the electrode surface, 2-butyne-1, 4-diol moderately hinders the mass transfer of the silver complexed ions from the bulk solution to the outer limit of the electrode double layer and affects the electrocrystallization step. Scanning electron microscopy analysis reveals that the presence of 2-butyne-1, 4-diol in the electrolyte is beneficial and the silver deposits obtained are smoother, more compact and more leveled. X-ray diffraction analysis of the silver deposits obtained at 0.5 g·L-1 2-butyne-1, 4-diol indicated that the (110) plane is the most preferred plane and is not affected by the presence of 2-butyne-1, 4-diol in the electrolyte.展开更多
基金Financial support from the National Natural Science Foundation of China (21163019) is gratefully acknowledged
文摘Ni/Al_2O_3-SiO_2 catalysts were synthesized via one-step method employing SiO_2 as an additive for the selective hydrogenation of butyne-1,4-diol(B_3D) to butane-1,4-diol(B1D). The prepared catalysts were evaluated by a series of characterization techniques including BET, XRD, SEM, EDX-mapping, TEM, H_2-TPR, XPS, NH_3-TPD and Py-FTIR. Compared to Ni/Al_2O_3 catalyst, the SiO_2-doped samples exhibited better B_3D conversion. SiO_2 could help to form a strong interaction between NiO with the support, which inhibited Ni agglomeration at high temperature, improved the Ni dispersion, and enhanced the hydrogenation activity. B_1D selectivity was mainly influenced by the quantity of Lewis acid sites in addition to the Ni dispersion. The catalyst with a silica loading of 6.4% demonstrated an excellent selectivity of 75.18%(by 13% higher than the contrastive Ni/Al_2O_3 catalyst), which was attributed to the larger amount of Lewis acid sites and the moderate interaction between NiO with the support, which could facilitate the nickel dispersion on a preferable surface area of 176.3 m^2/g of support.
基金supported by the Natural Science Foundation of Fujian Province,China(Grant No.2006J0440).
文摘The effect of 2-butyne-1, 4-diol （BD） on the deposition behavior of the Co-Ni alloy was investigated by linear sweep voltammetry. The results showed that BD could prevent the deposition of the Co-Ni alloy. The effect of BD concentration in the sulfate plating bath, on the structure of the Co-Ni deposit was studied by energy dispersive x-ray spectroscopy, scanning electron microscope, and X-ray diffraction, respectively. As a result, BD could smoothen the deposit surface and decrease the diameter of the grain, but too much of BD was not good for the size of the grain. In general, a hexagonal close-packed （hcp） phase of the Co-Ni alloy, with a preferentially oriented （110） plane, was prepared by electrodeposition in the presence of BD. The Co-Ni alloy as a catalyst for the electro-oxidation of ethanol in alkaline medium was investigated by cyclic voltammetry. The deposit plated from the bath containing BD possessed better electro-oxidation of ethanol performance compared with that of the deposit plated from only the sulfate plating bath, but too much of BD was not beneficial for catalytic activity. The Co-Ni film was suitable as a magnetic recording material.
文摘The effect of 2-butyne-1, 4-diol on silver electrodeposition process from 5, 5-dimethyl hydantoin solutions was investigated by means of cyclic voltammetric measurement, scanning electron microscopy (SEM) and X-ray diffraction (XRD). Cyclic voltammetric studies indicate that the reduction process of silver electrodeposition is influenced by adding 2-butyne-1, 4-diol. Owing to its adsorption on the electrode surface, 2-butyne-1, 4-diol moderately hinders the mass transfer of the silver complexed ions from the bulk solution to the outer limit of the electrode double layer and affects the electrocrystallization step. Scanning electron microscopy analysis reveals that the presence of 2-butyne-1, 4-diol in the electrolyte is beneficial and the silver deposits obtained are smoother, more compact and more leveled. X-ray diffraction analysis of the silver deposits obtained at 0.5 g·L-1 2-butyne-1, 4-diol indicated that the (110) plane is the most preferred plane and is not affected by the presence of 2-butyne-1, 4-diol in the electrolyte.
