期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
利用实验设计法优化线切割钼丝模产水平的影响因素 被引量:1
1
作者 蔡协勇 《福建冶金》 2023年第1期43-47,共5页
使用二阶段DOE实验设计。经由统计分析,得出模具材质A为2、定径带长度B为33~43mm、模角C为3.5°~4.7°为最佳的参数范围。试验模产水平实际从1.017×10^(5)m/mg提升到1.221×10^(5)m/mg,提升20%;钼丝合格率提升了3.7个... 使用二阶段DOE实验设计。经由统计分析,得出模具材质A为2、定径带长度B为33~43mm、模角C为3.5°~4.7°为最佳的参数范围。试验模产水平实际从1.017×10^(5)m/mg提升到1.221×10^(5)m/mg,提升20%;钼丝合格率提升了3.7个百分点;月产量12333万米前提下,年节约成本为132.12万元;而且与试误法相比,采用DOE方法可以大大缩短试验时间(由1年缩短为1.5个月)。 展开更多
关键词 A(具材质) B(定径带长度) c() 产水平 二阶段DOE
下载PDF
Indications of c-axis Charge Transport in Hole Doped Triangular Antiferromagnets 被引量:2
2
作者 LIANGYing LIUBin FENGShi-Ping 《Communications in Theoretical Physics》 SCIE CAS CSCD 2004年第4期614-618,共5页
The c-axis charge transport of the hole doped triangular antiferromagnet is investigated within the t-J model by considering the incoherent interlayer hopping. It is shown that the c-axis charge transport of the hole ... The c-axis charge transport of the hole doped triangular antiferromagnet is investigated within the t-J model by considering the incoherent interlayer hopping. It is shown that the c-axis charge transport of the hole doped triangular antiferromagnet is essentially determined by the scattering from the in-plane fluctuation. The c-axis conductivity spectrum shows a low-energy peak and the unusual high-energy broad band, while the c-axis resistivity is characterized by a crossover from the high temperature metallic-like behavior to the low temperature insulating-like behavior, which is qualitatively consistent with those of the hole doped square lattice antiferromagnet. 展开更多
关键词 c-axis charge transport triangular lattice t-J model
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部