Ablation behaviour and mechanical performance of ZrB_(2)-ZrC-SiC modified carbon/carbon composites prepared by vacuum infiltration combined with reactive melt infiltration

The development of advanced aircraft relies on high performance thermal-structural materials,and carbon/carbon com-posites(C/C)composited with ultrahigh-temperature ceramics are ideal candidates.However,the traditional routes of compositing are either inefficient and expensive or lead to a non-uniform distribution of ceramics in the matrix.Compared with the traditional C/C-ZrC-SiC composites prepared by the reactive melt infiltration of ZrSi_(2),C/C-ZrB_(2)-ZrC-SiC composites prepared by the vacuum infiltration of ZrB_(2) combined with reactive melt infiltration have the higher content and more uniform distribution of the introduced ceramic phases.The mass and linear ablation rates of the C/C-ZrB_(2)-ZrC-SiC composites were respectively 68.9%and 29.7%lower than those of C/C-ZrC-SiC composites prepared by reactive melt infiltration.The ablation performance was improved because the volatilization of B_(2)O_(3),removes some of the heat,and the more uniformly distributed ZrO_(2),that helps produce a ZrO2-SiO2 continu-ous protective layer,hinders oxygen infiltration and decreases ablation.

Effect of Heat Treatment on Microstructure and Mechanical Properties of Multiscale SiC_p Hybrid Reinforced 6061 Aluminum Matrix Composites

The performance of solid solution aging treatment on aluminum matrix composites prepared by powder metallurgy and reinforced with 6061 aluminum alloy powder as matrix;meanwhile, nano silicon carbide particles(nm Si Cp), submicron silicon carbide particles(1 μm Si Cp) and Ti particles were studied. The Al/Si Cp composite powder was prepared by high-energy ball milling, and then cold-pressed, sintered, hotextruded, and then heat-treated with different solution temperatures and aging times for the extruded composites. Optical microscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy(EDS), X-ray diffractometer(XRD) and extrusion testing were used to analyze and test the microstructure and mechanical properties of aluminum matrix composites. The results show that after the multi-stage solid solution at 530 ℃×2 h+535 ℃×2 h+540 ℃×2 h, the particles are mainly equiaxed grains and uniformly distributed. There is no reinforcement agglomeration, and the surface is dense and the insoluble phase is basically dissolved. In the matrix, the strengthening effect is good, and the hardness and compressive strength are 179.43 HV and 680.42 MPa, respectively. Under this solution process, when the aluminum matrix composites are aged at 170 ℃ for 10 h, the hardness and compressive strength can reach their peaks and increase to 195.82 HV and 721.48 MPa, respectively.

Multi-scale Modeling and Finite Element Analyses of Thermal Conductivity of 3D C/SiC Composites Fabricating by Flexible-Oriented Woven Process

Thermal conductivity is one of the most significant criterion of three-dimensional carbon fiber-reinforced SiC matrix composites(3D C/SiC).Represent volume element(RVE)models of microscale,void/matrix and mesoscale proposed in this work are used to simulate the thermal conductivity behaviors of the 3D C/SiC composites.An entirely new process is introduced to weave the preform with three-dimensional orthogonal architecture.The 3D steady-state analysis step is created for assessing the thermal conductivity behaviors of the composites by applying periodic temperature boundary conditions.Three RVE models of cuboid,hexagonal and fiber random distribution are respectively developed to comparatively study the influence of fiber package pattern on the thermal conductivities at the microscale.Besides,the effect of void morphology on the thermal conductivity of the matrix is analyzed by the void/matrix models.The prediction results at the mesoscale correspond closely to the experimental values.The effect of the porosities and fiber volume fractions on the thermal conductivities is also taken into consideration.The multi-scale models mentioned in this paper can be used to predict the thermal conductivity behaviors of other composites with complex structures.

Compositional and Hollow Engineering of Silicon Carbide/Carbon Microspheres as High-Performance Microwave Absorbing Materials with Good Environmental Tolerance

Microwave absorbing materials(MAMs)characterized by high absorption efficiency and good environmental tolerance are highly desirable in practical applications.Both silicon carbide and carbon are considered as stable MAMs under some rigorous conditions,while their composites still fail to produce satisfactory microwave absorption performance regardless of the improvements as compared with the individuals.Herein,we have successfully implemented compositional and structural engineering to fabricate hollow Si C/C microspheres with controllable composition.The simultaneous modulation on dielectric properties and impedance matching can be easily achieved as the change in the composition of these composites.The formation of hollow structure not only favors lightweight feature,but also generates considerable contribution to microwave attenuation capacity.With the synergistic effect of composition and structure,the optimized SiC/C composite exhibits excellent performance,whose the strongest reflection loss intensity and broadest effective absorption reach-60.8 dB and 5.1 GHz,respectively,and its microwave absorption properties are actually superior to those of most SiC/C composites in previous studies.In addition,the stability tests of microwave absorption capacity after exposure to harsh conditions and Radar Cross Section simulation data demonstrate that hollow SiC/C microspheres from compositional and structural optimization have a bright prospect in practical applications.

Experimental Investigation of the Anisotropic Thermal Conductivity of C/SiC Composite Thin Slab

Fiber-reinforced composites possess anisotropic mechanical and heat transfer properties due to their anisotropic fibers and structure distribution.In C/Si C composites,the out-of-plane thermal conductivity has mainly been studied,whereas the in-plane thermal conductivity has received less attention due to their limited thickness.

Microwave absorption properties of Ni/C@SiC composites prepared by precursor impregnation and pyrolysis processes

In the present study,the unique three-dimensional graphene coated nickel(Ni/C)foam reinforced silicon carbide(Ni/C@SiC)composites were first obtained via the precursor impregnation and pyrolysis(PIP)processes.The microstructure images indicated that the SiC fillers were successfully prepared in the skeleton pores of the Ni/C foam.The influence of the PIP cycles on the microwave absorption performances was researched,and the results indicated that after the primary PIP process,Ni/C@SiC-I possessed the optimal microwave absorbing performance with a minimum reflection loss(RL)of-25.87 d B at 5.28 GHz and 5.00 mm.Besides,the RL values could be below-10.00 dB from 5.88 GHz to 7.74 GHz when the corresponding matching thickness was 3.85 mm.However,the microwave absorption properties of Ni/C@SiC-II and Ni/C@SiC-Ⅲwere tremendously degraded as the PIP times increased.At last,the electromagnetic parameter,dielectric loss,attenuation constant as well as impedance matching coefficient were further investigated to analyze the absorbing mechanism,which opened a new path for the certain scientific evaluation of the absorbing materials and had extremely important to the defence technology.

基于探测器响应机理的碳/碳构件CT图像环状伪影的校正方法

在碳/碳复合材料的计算机断层扫描(CT)中,由于探测器单元的响应非线性及不一致性导致重建图像出现严重的环状伪影,干扰图像中缺陷的检出,影响检测系统对被检构件的质量评价。结合碳/碳复合材料组分单一且密度均匀的特点,提出了一种基于探测器响应机理的CT图像环状伪影的校正方法,利用采集的劣化投影数据做预重建,对重建结果做阈值分割以获得被检测物体的三维模型。结合已知的材料和密度信息,对被检物体进行重投影,得到投影数据的理论值与实测值之间的映射关系,用于探测器响应校正以优化检测图像。与传统低通滤波的环状伪影校正方法相比,该方法考虑了环状伪影的物理成因并充分利用了检测对象的先验信息。研究结果表明,该校正方法在保留图像细节和纹理的同时,能够有效减少环状伪影,提升图像质量,消除伪影对于图形中缺陷识别的干扰,为提升检测系统对碳/碳复合材料构件缺陷的检出能力提供理论依据。

氮含量对Ti-B-C-N薄膜微观结构和性能的影响

采用反应磁控溅射法在高速钢基体上制备氮原子分数分别为10.8%,15.6%,28.1%,36.4%的Ti-B-C-N薄膜,研究了氮含量对薄膜微观结构、硬度和摩擦磨损性能的影响。结果表明:Ti-B-C-N薄膜均由α-Fe和Ti(C,N)纳米晶组成,具有Ti(C,N)纳米晶镶嵌在非晶基体相中的纳米复合结构;随着氮含量增加,非晶相含量增加,Ti(C,N)纳米晶的含量和晶粒尺寸减小;随着氮含量增加,Ti-B-C-N薄膜的显微硬度增大,摩擦因数和磨损率均减小,表面磨痕变浅,磨损机制由剥落和微观犁削转变为微观抛光。

3D-DSA与Dyna-CT在颅内支架置入术中的临床应用研究

目的探讨三维DSA血管成像(3D-DSA)及数字平板造影机的C臂旋转并断层重建技术(DynaCT)在颅内支架置入术患者中的临床应用。方法选择2019年1月-2020年6月厦门大学附属中山医院收治92例颅内动脉狭窄患者,所有患者均行颅内支架置入术治疗,分为对照组(n=38例)和观察组(n=54例)。对照组采用3D-DSA引导,观察组采用DynaCT引导,术后进行12个月门诊随访,比较两组改良Rankin量表(mRS)评分、手术成功率、并发症、支架再狭窄及斑块检出率。结果观察组术后4个月、8个月及12个月mRS评分、支架成形术耗时低于对照组(P<0.05);观察组Dyna-CT的术前规划、观察到支架表面图像与术中所见吻合,手术成功率为83.33%,高于对照组63.16%(P<0.05);两组围术期并发症发生率无统计意义(P>0.05);观察组手术后进行12个月门诊随访,患者支架再狭窄、血管狭窄部位斑块检出率低于对照组(P<0.05)。结论DynaCT用于颅内支架置入术中能改善患者症状,缩短支架成形术耗时,有助于提高手术成功率,未增加并发症发生率,能降低血管狭窄部位斑块检出率,值得推广应用。

晶粒尺寸对界面含Cr-O-C防黏层Cu/Ni复合体拉伸性能的影响

通过分子动力学方法研究含Cr-O-C防黏层的具有不同晶粒尺寸的Cu/Ni复合体的拉伸变形。结果表明:当Cu/Ni复合体的晶粒尺寸大于12 nm时,不论界面不含Cr、O和C原子或含有定量Cr、O和C原子,复合体的屈服强度随着晶粒尺寸的减小呈现增大趋势,符合细晶强化规律,晶粒塑性变形主要受晶体内部的位错滑移控制,最大应力增加9.52%;当晶粒尺寸小于12 nm时,由于晶界所占比例的增加,拉伸过程的塑性变形更多受晶界变形控制,屈服强度下降。Cr-O-C界面弱化了Cu/Ni复合体的强度,随着界面上Cr、O和C原子数量的增加,Cu/Ni复合体的抗拉强度随之降低,最大应力下降56.40%,Cu/Ni复合体内部的位错数量也随之降低,转移到Ni表面的Cu原子数量随之减少。

船用C型夹层板隔声性能研究

夹层板作为一种新型结构,具有设计性强、重量轻、比刚度高、减振隔声性能好等优点,已被应用于各种工程结构。然而,其夹层结构形式种类繁多,对复杂夹层结构的隔声性能进行理论分析比较困难,亟需开展新的近似分析方法。本文针对船用C型夹层板,基于弹簧、扭簧与集中质量的等效方法,建立C型夹层板的声振耦合控制方程,利用空间谐波展开法,推导C型夹层结构的传声损失表达式,讨论夹层板系统参数对结构隔声性能的影响规律。结果表明,材料属性与夹层板结构面板的厚度对C型夹层板结构隔声性能的影响较大。同时,通过有限元仿真,验证了理论分析的有效性。

C/Sn复合薄膜的磁控溅射制备及其作为锂离子电池负极材料的电化学性能

采用磁控溅射的方法在铜箔上制备了C/Sn复合薄膜并将其作为锂离子电池负极材料,研究了C/Sn复合薄膜中Sn质量分数对其电化学性能的影响。研究发现,随着复合薄膜中Sn质量分数的增加,其首圈放电比容量增加,在一定范围内增加Sn质量分数,首圈库仑效率增加,但当Sn质量分数过多时其库仑效率降低。Sn质量分数分别为89.20%、91.61%、93.85%、95.81%的四种复合薄膜,在电流密度为500 mA/g时的首圈放电比容量分别为1195.4、1372.97、1574.86、1642.30 mA·h/g,首圈库仑效率分别为86.84%、87.88%、94.06%、80.66%。循环200圈后,四种复合薄膜的比容量衰减率分别为0.70%、6.13%、11.32%、18.88%。研究结果表明,当复合薄膜中Sn质量分数为89.20%时,其具有最优的倍率性能和循环稳定性能,随着复合薄膜中Sn质量分数的增加,其倍率性能及循环稳定性变差。

超高温陶瓷改性C/C复合材料抗氧化烧蚀性能研究进展

碳/碳(C/C)复合材料具有高强、轻质和耐温等优势,在航天领域取得广泛应用;但由于其抗氧化性能较差,难以满足高超声速飞行器长时飞行、大气层再入飞行和跨大气层飞行的服役环境。利用超高温陶瓷改性C/C复合材料(C/C-UHTC)可以显著提高C/C复合材料的抗氧化烧蚀性能,有望满足新一代飞行器长时间抗氧化、抗烧蚀及结构强度的要求。本文总结了C/C-UHTC复合材料烧蚀性能的常用测试方法,包括氧-乙炔烧蚀、等离子烧蚀、激光烧蚀和风洞烧蚀,简要介绍了各种烧蚀性能测试方法的特点。此外,对近年来Zr系和Hf系单组元、双组元和三组元C/C-UHTC复合材料的烧蚀性能及烧蚀机理进行详细阐述。

聚乙烯醇/维生素C复合保鲜膜制备及其对白玉菇品质的影响

为提高白玉菇贮存和运输质量,保证其营养价值以及销售过程的品质,该研究以聚乙烯醇为基材,以维生素C(vitamin C,V_(C))为抗氧化剂,制备出不同含量聚乙烯醇(polyvinyl alcohol,PVA)/V_(C)保鲜膜,探讨含抗氧化剂的PVA保鲜膜的理化性能及其对白玉菇品质的影响。结果表明,含0.10%V_(C)的保鲜膜理化性能优异,满足包装材料的要求。采用PVA(0.10%V_(C))保鲜膜处理的白玉菇样品色泽和感官品质均较好,失重率仅为9.20%,样品中的总酚类物质以及蛋白质含量的保留率分别为54.00%和75.50%,与聚乙烯(polyethylene,PE)薄膜相比,其货架期延长4 d。

Anti-oxidation properties of ZrB_2 modified silicon-based multilayer coating for carbon/carbon composites at high temperatures

To improve the anti-oxidation ability of silicon-based coating for carbon/carbon （C/C） composites at high temperatures, a ZrB2 modified silicon-based multilayer oxidation protective coating was prepared by pack cementation. The phase composition, microstructure and oxidation resistance at 1773, 1873 and 1953 K in air were investigated. The prepared coating exhibits dense structure and good oxidation protective ability. Due to the formation of stable ZrSiO4-SiO2 compound, the coating can effectively protect C/C composites from oxidation at 1773 K for more than 550 h. The anti-oxidation performance decreases with the increase of oxidation temperature. The mass loss of coated sample is 2.44% after oxidation at 1953 K for 50 h, which is attributed to the decomposition of ZrSiO4 and the volatilization of SiO2 protection layer.

C/SiC/MoSi_2-SiC-Si multilayer coating for oxidation protection of carbon/carbon composites

C/SiC/MoSi2-SiC-Si oxidation protective multilayer coating for carbon/carbon （C/C） composites was prepared by pack cementation and slurry method. The microstructure, element distribution and phase composition of the as-received coating were analyzed by scanning electron microscopy （SEM）, energy dispersive X-ray spectroscopy （EDS） and X-ray diffraction （XRD）. The results show that the multilayer coating was composed of MoSi2, SiC and Si. It could effectively protect C/C composites against oxidation for 200 h with the mass loss of 3.25% at 1873 K in static air. The mass loss of the coated C/C composites results from the volatilization of SiO2 and the formation of cracks and bubble holes in the coating.

C/C-HfC复合材料的抗烧蚀性能

以无机铪溶液为前驱体,采用化学气相渗透法(CVI)和前驱体浸渍裂解法(PIP)制备密度为2.14 g/cm^(3)的C/C-HfC复合材料,分析其微观结构和组成,测试材料的抗烧蚀性能。结果表明:HfC陶瓷均匀地分散于基体的孔隙中,且与基体结合紧密。引入HfC陶瓷可以显著增强C/C复合材料的抗烧蚀性能。在相同的热流条件下,烧蚀时间为120 s时,C/C-HfC复合材料的线烧蚀率为6.20×10^(-2)mm·s^(-1),质量烧蚀率为2.03×10^(-2)g·s^(-1),分别比C/C复合材料降低了48.33%和40.12%。在烧蚀过程中,HfC会与热流中的氧气反应生成熔融的HfO_(2),均匀地覆盖在基体的表面形成保护层,隔绝热流,防止基体被氧化,同时阻止热量的传递。熔融HfO_(2)的蒸发也会带走表面的部分热量。随着烧蚀时间的增加,HfO_(2)的损耗会逐渐上升,基体表面的保护层会逐渐被破坏,热流对基体产生的烧蚀损伤会更为严重。

Bending properties and fracture mechanism of C/C composites with high density preform

C/C composites with banded structure pyrocarbon were fabricated by fast chemical vapor infiltration（CVI）,with C3H6 as carbon source,N2 as carrier gas,and three-dimensional（3D） 12K PAN-based carbon fabric with high density of 0.94 g/cm3 as preform.Experimental results indicated that the fracture characteristics of C/C composites were closely related to the frequency of high-temperature treatment（HTT） at the break of CVI process.According to the load？displacement curves,C/C composites showed a pseudoplastic fracture after twice of HTT.After three times of HTT,load？displacement curves tended to be stable with a decreasing bending strength at 177.5 MPa.Delamination failure and intrastratal fiber fracture were observed at the cross-section of C/C composites by scanning electronic microscope.Because the content of pyrocarbon and fibers has a different distribution in layers,the C/C composites show different fracture characteristics at various regions,which leads to good toughness and bending strength.

C/C基体上ZrB_(2)/SiC复合涂层的抗烧蚀性增强方法

研究高压热流场景下,在碳/碳(C/C)基体表面ZrB_(2)/SiC复合涂层的抗烧蚀性增强方法.在等离子体喷涂ZrB_(2)/SiC复合涂层表面,采用CH3SiCl3-H2-Ar系统,化学气相沉积(CVD)-SiC密封层.对ZrB_(2)/SiC涂层与CVD-SiC密封层的结构演化、烧蚀性能与烧蚀机理进行了研究.结果表明:CVD-SiC密封层增强的ZrB_(2)/SiC复合涂层经过两个600 s循环烧蚀后,仍然具备抗烧蚀性能,表面CVD-SiC由β相向α相转化.CVD-SiC密封层填充了等离子喷涂ZrB_(2)/SiC复合涂层的空隙,限制了氧沿着涂层裂纹和孔洞向C/C基体扩散,进而提高了抗烧蚀性.

基于超材料设计实现C/Co复合材料的超宽带吸收

本文通过简单的一步热解法合成了C/Co复合材料,在材料质量填充浓度为35%时,观察到其具有优异的介电频散性能。当材料厚度2.5 mm时,该复合材料在11.2 GHz的最小反射率为-23.7 dB,小于-10 dB的带宽为3.8 GHz。为了进一步提高吸收体的吸波性能,利用全介质超材料的设计对吸收体的宏观结构进行优化,此方法成功地将小于-10 dB的吸收带宽扩展到15 GHz(7.0~22.0 GHz)。该研究结果可以为高性能微波吸收材料的制备工艺和结构设计提供有价值的参考。