Comparison Structure Forms Between Isogrid and Orthogrid of C/E Composite Trellis Wound Structure Based on Calculation of Load-Carrying

This paper calculated load-carrying of isogrid and orthogrid of carbon-epoxy composite trellis wound structure(C/E CTWS) using non-linear finite element method.Based on the analysis,test cases were designed and tests of axial compression were carried.Analysis result and test result fit well.In order to be used in the project,this kind of structure cut-out repairing was calculated.The method presented in this paper has been proved and can be used to solve complicated engineering problems.According to calculations and experimental results combined with application,a principle of choosing wound structure is obtained and principle could be applied to engineering.

C/E复合材料网格缠绕结构一体化设计

根据多年的设计生产实践,总结了复合材料网格缠绕结构的优缺点。在发挥其优点的基础上,针对复合材料网格缠绕结构的缺点,提出了一体化设计设想,给出了一体化研制流程,并对流程中的各个环节进行了探讨。分析表明,对复合材料网格缠绕结构进行一体化设计可缩短研制周期,降低研制成本,从而可以使复合材料网格缠绕结构得到进一步推广使用。

在轴、外压联合作用下的C/E复合材料网格缠绕结构的开口补强设计

在复合材料网格结构临界轴、外压计算公式的基础上计算了C/E复合材料网格缠绕结构的整体承载能力,以无开口结构为目标,给出了补强设计方案。本文的研究结果,为复合材料壁板开口处结构的补强设计提供了可行方案,解决了工程中的实际问题。

C/E复合材料网格缠绕结构三维建模与模具设计

通过对圆柱螺旋线和圆锥螺旋线参数方程的推导,实现了网格结构及模具的三维建模。三维模型的建立,可实现结构空间协调,缩短设计周期,节省研制经费,提高生产效率。在此基础上提出了可行的金属模具设计方案,找到了切实可行的模具加工方法,并在工程中加以应用,取得了较好效果。

在轴、外压联合作用下的C/E复合材料网格缠绕结构的设计与分析

在复合材料网格结构临界轴、外压计算公式的基础上讨论了C/E复合材料网格缠绕结构的设计问题,并在工程中加以应用,取得了较好效果。