Failure evaluation and control factor analysis of slope block instability along traffic corridor in Southeastern Tibet

The instability of slope blocks occurred frequently along traffic corridor in Southeastern Tibet(TCST),which was primarily controlled by the rock mass structures.A rapid method evaluating the control effects of rock mass structures was proposed through field statistics of the slopes and rock mass structures along TCST,which combined the stereographic projection method,modified M-JCS model,and limit equilibrium theory.The instabilities of slope blocks along TCST were then evaluated rapidly,and the different control factors of instability were analyzed.Results showed that the probabilities of toppling(5.31%),planar(16.15%),and wedge(35.37%)failure of slope blocks along TCST increased sequentially.These instability modes were respectively controlled by the anti-dip joint,the joint parallel to slope surface with a dip angle smaller than the slope angle(singlejoint),and two groups of joints inclined out of the slope(double-joints).Regarding the control effects on slope block instability,the stabilization ability of doublejoints(72.7%),anti-dip joint(67.4%),and single-joint(57.6%)decreased sequentially,resulting in different probabilities of slope block instability.Additionally,nearby regional faults significantly influenced the joints,leading to spatial heterogeneity and segmental clustering in the stabilization ability provided by joints to the slope blocks.Consequently,the stability of slope blocks gradually weakened as they approached the fault zones.This paper can provide guidance and assistance for investigating the development characteristics of rock mass structures and the stability of slope blocks.

Prevention and Control Strategies of Nosocomial Infection and Effectiveness Evaluation in a Tertiary Teaching Hospital during the Epidemic of COVID-19

Objective: To evaluate the role of prevention and control strategies for nosocomial infection in a tertiary teaching hospital during the sudden outbreak of Corona Virus Disease 2019 (COVID-19). Methods: The hospital initiated an emergency plan involving multi-departmental defense and control. It adopted a series of nosocomial infection prevention and control measures, including strengthening pre-examination and triage, optimizing the consultation process, improving the hospital’s architectural composition, implementing graded risk management, enhancing personal protection, and implementing staff training and supervision. Descriptive research was used to evaluate the short-term effects of these in-hospital prevention and control strategies. The analysis compared changes in related evaluation indicators between January 24, 2020 and February 12, 2020 (Chinese Lunar New Year’s Eve 2020 to lunar January 19) and the corresponding lunar period of the previous year. Results: Compared to the same period last year, the outpatient fever rate increased by 1.85-fold (P P Conclusion: The nosocomial infection prevention and control strategies implemented during this specific period improved the detection and control abilities for the COVID-19 source of infection and enhanced the compliance with measures. This likely contributed significantly to avoiding the occurrence of nosocomial infection.

Evaluating efficacy of screening for upper gastrointestinal cancer in China:a study protocol for a randomized controlled trial

Objective： To evaluate the efficacy and feasibility of screening procedure for upper gastrointestinal cancer in both high-risk and non-high-risk areas in China. Setting： Seven cities/counties, representing three economical-geographical regions （Eastern, Central and Western） in China, were selected as screening centers： three in high-risk areas and four in non-high-risk areas. Participants： Villages/communities in these seven centers regarded as clusters were randomly assigned to either intervention group （screening by endoscopic examination） or control group （with normal community care） in a 1：1 ratio stratified by each center. Eligible participants are local residents aged 40-69 years in the selected villages/communities with no history of cancer or endoscopic examination in the latest 3 years who are mentally and physically competent. Those who are not willing to take endoscopic examination or are unwilling to sign the consent form are excluded from the study. Totally 140,000 participants will be enrolled. Interventions： In high-risk areas of upper gastrointestinal cancer, all subjects in screening group will be screened by endoscopy. In non-high-risk areas, 30% of the subjects in screening group, identified through a survey, will be screened by endoscopy. Primary and secondary outcome measures： The primary outcome is the mortality caused by upper gastrointestinal cancer. The secondary outcomes include detection rate, incidence rate, survival rate, and clinical stage distribution. Additional data on quality of life and cost-effectiveness will also be collected to answer important questions regarding screening effects. Conclusions： Screening strategy evaluated in those areas with positive findings may be promoted nationally and applied to the majority of Chinese people. On the other hand, negative findings will provide scientific evidence for abandoning a test and shifting resources elsewhere. Trial registration： The study has been registered with the Protocol Registration System in Chinese Clinical Trial Registry （identifier： ChiCTR-EOR-16008577）.

Hazard-evaluation-oriented Moving Horizon Parallel Steering Control for Driver-Automation Collaboration During Automated Driving

Prompted by emerging developments in connected and automated vehicles, parallel steering control, one aspect of parallel driving, has become highly important for intelligent vehicles for easing the burden and ensuring the safety of human drivers. This paper presents a parallel steering control framework for an intelligent vehicle using moving horizon optimization.The framework considers lateral stability, collision avoidance and actuator saturation and describes them as constraints, which can blend the operation of a human driver and a parallel steering controller effectively. Moreover, the road hazard and the steering operation error are employed to evaluate the operational hazardous of an intelligent vehicle. Under the hazard evaluation,the intelligent vehicle will be mainly operated by the human driver when the vehicle operates in a safe and stable manner.The automated steering driving objective will play an active role and regulate the steering operations of the intelligent vehicle based on the hazard evaluation. To verify the effectiveness of the proposed hazard-evaluation-oriented moving horizon parallel steering control approach, various validations are conducted, and the results are compared with a parallel steering scheme that does not consider automated driving situations. The results illustrate that the proposed parallel steering controller achieves acceptable performance under both conventional conditions and hazardous conditions.

Novel method for the evaluation of data quality based on fuzzy control

One of the goals of data collection is preparing for decision-making, so high quality requirement must be satisfied. Rational evaluation of data quality is an effective way to identify data problem in time, and the quality of data after this evaluation is satisfactory with the requirement of decision maker. A fuzzy neural network based research method of data quality evaluation is proposed. First, the criteria for the evaluation of data quality are selected to construct the fuzzy sets of evaluating grades, and then by using the learning ability of NN, the objective evaluation of membership is carried out, which can be used for the effective evaluation of data quality. This research has been used in the platform of ＇data report of national compulsory education outlay guarantee＇ from the Chinese Ministry of Education. This method can be used for the effective evaluation of data quality worldwide, and the data quality situation can be found out more completely, objectively, and in better time by using the method.

Equity Study in Health Workforce on Tuberculosis Control in China: a Nationwide Evaluation

We aimed to describe the distribution of tuberculosis （TB） health workers in China and provide evidences of potential inequity for policy development. We used Lorenz curves and Gini index to characterize the distribution of TB health workers by population size, geographical area and number of annual registered TB cases. An additional stratified analysis was done by three economic regions. The Gini index were 0.33 for population size, 0.62 for geographical area and 0.30 for number of registered tuberculosis cases that indicated an acceptable average, significant inequity and a relative average distribution nationwide respectively.

Evaluation matrix with the speed feature based on double inspiriting control lines

Methods of the comprehensive evaluation have been studied for many years. However, the change speed of evaluated objects was rarely considered by the existing evaluation methods. An evaluation matrix is proposed to remedy this deficiency. Firstly, the change speed state （CSS） of the evaluated objects is analyzed based on double inspiriting control lines （DICLs）, and a matrix of the CSS is constructed. Then, 72 elements in the matrix are analyzed, and formulas describing each CSS are given. The efficiency of the proposed evaluation matrix is proved when the CSS merges with the change speed trend （CST） in the dynamic comprehensive evaluation. Finally, a computing example shows that the proposed evaluation matrix is feasible in the dynamic comprehensive evaluation with the speed feature.

Blockchain-Empowered Token-Based Access Control System with User Reputation Evaluation

Currently,data security and privacy protection are becoming more and more important.Access control is a method of authorization for users through predefined policies.Token-based access control(TBAC)enhances the manageability of authorization through the token.However,traditional access control policies lack the ability to dynamically adjust based on user access behavior.Incorporating user reputation evaluation into access control can provide valuable feedback to enhance system security and flexibility.As a result,this paper proposes a blockchain-empowered TBAC system and introduces a user reputation evaluation module to provide feedback on access control.The TBAC system divides the access control process into three stages:policy upload,token request,and resource request.The user reputation evaluation module evaluates the user’s token reputation and resource reputation for the token request and resource request stages of the TBAC system.The proposed system is implemented using the Hyperledger Fabric blockchain.The TBAC system is evaluated to prove that it has high processing performance.The user reputation evaluation model is proved to be more conservative and sensitive by comparative study with other methods.In addition,the security analysis shows that the TBAC system has a certain anti-attack ability and can maintain stable operation under the Distributed Denial of Service(DDoS)attack environment.

Evaluation of Three Harvest Control Rules for Bigeye Tuna(Thunnus obesus) Fisheries in the Indian Ocean

The stock of Bigeye tuna(Thunnus obesus) in the Indian Ocean supports an important international fishery and is considered to be fully exploited. The responsible management agency, the Indian Ocean Tuna Commission(IOTC), does not have an explicit management decision-making framework in place to prevent over-fishing. In this study, we evaluated three harvest control rules, i) constant fishing mortality(CF), from 0.2 to 0.6, ii) constant catch(CC), from 60000 to 140000 t, and iii) constant escapement(CE), from 0.3 to 0.7. The population dynamics simulated by the operating model was based on the most recent stock assessment using Stock Synthesis version Ⅲ(SS3). Three simulation scenarios(low, medium and high productivity) were designed to cover possible uncertainty in the stock assessment and biological parameters. Performances of three harvest control rules were compared on the basis of three management objectives(over 3, 10 and 25 years): i) the probability of maintaining spawning stock biomass above a level that can sustain maximum sustainable yield(MSY) on average, ii) the probability of achieving average catches between 0.8 MSY and 1.0 MSY, and iii) inter-annual variability in catches. The constant escapement strategy(CE=0.5), constant fishing mortality strategy(F=0.4) and constant catch(CC=80000) were the most rational among the respective management scenarios. It is concluded that the short-term annual catch is suggested at 80000 t, and the potential total allowable catch for a stable yield could be set at 120000 t once the stock had recovered successfully. All the strategies considered in this study to achieve a ‘tolerable' balance between resource conservation and utilization have been based around the management objectives of the IOTC.

From the new Austrian tunneling method to the geoengineering condition evaluation and dynamic controlling method

The new Austrian tunneling method （NATM） is widely applied in design and construction of underground engineering projects. When the type and distribution of unfavorable geological bodies （UGBs） associated with their influences on geoengineering are complicated or unfortunately are overlooked, we should pay more attentions to internal features of rocks grades IV and V （even in local but mostly controlling zones）. With increasing attentions to the characteristics, mechanism and influences of engineering construction-triggered geohazards, it is crucial to fully understand the disturbance of these geohazards on project construction. A reasonable determination method in construction procedure, i.e. the shape of working face, the type of engineering support and the choice of feasible procedure, should be considered in order to mitigate the construction-triggered geohazards. Due to their high sensitivity to groundwater and in-situ stress, various UGBs exhibit hysteretic nature and failure modes. To give a complete understanding on the internal causes, the emphasis on advanced comprehensive geological forecasting and overall reinforcement treatment is therefore of more practical significance. Compre- hensive evaluation of influential factors, identification of UGB, and measures of discontinuity dynamic controlling comprises the geoengineering condition evaluation and dynamic controlling method. In a case of a cut slope, the variations of UGBs and the impacts of key environmental factors are presented, where more severe construction-triggered geohazards emerged in construction stage than those predicted in design and field investigation stages. As a result, the weight ratios of different influential factors with respect to field investigation, design and construction are obtained.

Evaluation of Control Effects against Sugarcane Pests：A New Sustained-release and Long-lasting Pesticide and Convenient and Efficient Pesticide Application Technology

[Objective]The paper was to screen a new ideal sustained-release,long-lasting and low-toxic pesticide and convenient and efficient pesticide application technology for controlling Ceratovacuna lanigera and Baliathrips serratus. [Method]2% Imidacloprid GR were selected and applied in the soil for field efficacy trial. [Result] The optimum dosage of 2% imidacloprid GR was 30 kg/hm^2（ active ingredient 600 g）,which can be mixed with fertilizer（ 30 kg pesticide and 40-80 kg fertilizer per hm^2） once combined with sugarcane planting management or big ridging during February and June. The control effects against C. lanigera and B. serratus could be more than 98. 2% and 81. 1%,respectively. The actual yield and sugar content in various pesticide treatments were increased by 33 390 kg/hm^2 and 6. 6% respectively compared to blank control. [Conclusion]2% imidacloprid GR has good control effects on C. lanigera and B. serratus. It is a new pesticide with ideal sustained-release,long-lasting and low-toxin effects against C. lanigera and B. serratus. Therefore,it could be used alternatively with other pesticides,to delay production and development of drug resistance.

Overall Evaluation of the Control Schemes of Automobile Pollution and Its Multi-Target Decision

Various control schemes of automobile pollution are comprehensively evaluated by using the weighting and feyzzy methods, from which several feasible schemes are selected, and then mulit-target decision is made by using the minimum distance and hierarcby analysis methods, for determining the optimal control methods of automobile pollution.

Benefit Evaluation Model of Small Watershed Control Based on Projection Pursuit

A projection pursuit model is presented in this paper for comprehensive evaluation of benefits of small watershed control.By using the model,small watershed control samples with many benefit evaluation indexes can be synthesized projective values with one dimension.The samples can be naturally evaluated according to the projective values.The parameters of the model is optimized by using real coding beased accelerating genetic aglrothm,which overcomes the shortcomings of large computation amount and difficulty of computer programming in traditional projection prusuit methods,and provides a new way for wide applications of projection pursuit technique to different evaluation problems in agricultural systems engineering.

Control Effect Evaluation of 70% Thiamethoxam ZF against Ceratovacuna lanigera Zehntner and Baliathrips serratus Kobus on Sugarcane

[Objective] The paper was to provide scientific basis for popularization and application of 70% Thiamethoxam ZF. [Method] 70% Thiamethoxam ZF was selected and applied in the soil for controlling Ceratovacuna lanigera Zehntner and Baliathrips serratus Kobus. [ Result ] 70% Thiamethoxam ZF had good con-rol effect against C. lanigera and B. serratus. The optimum dosage of 70% Thiamethoxam ZF was 450 g/hm^2 （effective ingredients 315 g）. 70% Thiamethoxam ZF （ dosage per hm^2 ） mixed with the regular fertilizer （ dosage per hm^2 ） should be applied together in sugarcane planting and management from February to June. The control effects against C. lanigera and B. serratus were above 98.4% and 82.9% respectively. The actual yield and sugar content were increased by more than 34 290 kg/hm^2 and 6.8% respectively compared to blank control. [ Conclusion] 70% Thiamethoxam ZF was a new ideal pesticide with characteristics of sustained- release, long-lasting and low-toxic for controlling C. lanigera and B. serratus, and should be applied widely in the sugarcane planting area.

Online Delay-Evaluation Control for Networked Control Systems

This paper presented an evaluation approach of time delays for networked control systems (NCS). An improved scheme based on optimal LQG control was designed to achieve desired performance despite the uncertain delays in the system. The experimental results illustrate the effectiveness of the proposed control design and satisfactory performance of the closed loop system.

Flow control performance evaluation of a tri-electrode sliding discharge plasma actuator

Tri-electrode sliding discharge(TED)plasma actuators are formed by adding a direct current(DC)exposed electrode to conventional dielectric barrier discharge(DBD)plasma actuators.There are three TED modes depending on the polarity and amplitude of the DC supply:DBD discharge,extended discharge and sliding discharge.This paper evaluates the electrical,aerodynamic and mechanical characteristics of a TED plasma actuator based on energy analysis,particle image velocimetry experiments and calculations using the Navier-Stokes equation.The flow control performances of different discharge modes are quantitatively analyzed based on characteristic parameters.The results show that flow control performance in both extended discharge and sliding discharge is more significant than that of DBD,mainly because of the significantly higher(up to 141%)body force of TED compared with DBD.However,conductivity loss is the primary power loss caused by the DC polarity for TED discharge.Therefore,power consumption can be reduced by optimizing the dielectric material and thickness,thus improving the flow control performance of plasma actuators.

Methodological Issues and Applications in Economic Evaluation of Alternative Livestock Diseases Control Strategies： The Case of the CBPP Quarantine Line in North-Eastern Kenya

Contagious bovine pleuro-pneumonia （CBPP） is one of the endemic and life-threatening livestock diseases in the arid and semi-arid land areas （ASALs） of Kenya, which justify the case for the control of livestock diseases to avoid the spread of such diseases from the ASALs to the rest of the country, and a CBPP control quarantine line （CQL） that to help prevent the spread of CBPP from the ASALs of North-eastern Kenya to the rest of the country has been in existence since the colonial （pre-1963） times in Kenya. However, the livestock keepers in the ASALs view the CQL as an impediment to their main source of livelihoods because it entails livestock movement restrictions, thus constraining unfettered livestock marketing. Available literature shows that there is a dearth of information on the economics of livestock diseases control in Kenya in terms of its impacts on social welfare. Employing the CQL as a case study, this study shows that an application of analytic techniques that combine disease risk analysis and conventional cost-benefit modelling that incorporates some aspects that are specific to livestock diseases and their control strategies can generate indices of economic impacts of livestock diseases control on social welfare. The study finds that the livestock keepers and traders in Kenya do not consider CBPP a major problem to warrant livestock movement restrictions, yet the official records of the veterinary authorities indicate that CBPP is a major threat to the cattle industry in Kenya. Annually, the government spends substantial resources on the CQL operation and maintenance and also on CBPP surveillance and monitoring to contain the CBPP menace in Kenya. This study shows that such expenditures are economically and socially justifiable. Nevertheless, the study finds some operational inefficiencies in the enforcement of the CQL requirements. The authors, therefore, undertake an evaluation of alternative CBPP control strategies and conclude that it would be more cost effective to shift the CQL from its current location to the international borders of the arid districts, provided that this action is preceded by adequate CBPP control preparatory measures, as described in the paper.

Evaluation of the Effects of High-efficiency Compound Formulations on the Prevention and Control of Sugarcane Brown Rust

[Objectives]This study was conducted to screen high-efficiency compound formulations and precise application technologies for the prevention and control of sugarcane brown rust. [Methods] Zineb, dinconazole, mancozeb, azoxystrobin, pyraclostrobin, difenoconazole·azoxystrobin, chlorothalonil and carbendazim were selected for field efficacy tests. [Results] Four formulations,(65% zineb WP 1 500 g+75% chlorothalonil WP 1 500 g+potassium dihydrogen phosphate 2 400 g+agricultural synergist 300 ml)/hm^(2),(12.5% dinconazole WP 1 500 g +75% chlorothalonil WP 1 500 g+potassium dihydrogen phosphate 2 400 g+agricultural synergist 300 ml)/hm^(2),(80% mancozeb WP 1 500 g+75% chlorothalonil WP 1 500 g+potassium dihydrogen phosphate 2 400 g+agricultural synergist 300 ml)/hm^(2) and(30% difenoconazole·azoxystrobin SC 900 ml+potassium dihydrogen phosphate 2 400 g+agricultural synergist 300 ml) had good control efficacy on sugarcane brown rust, and showed disease indexes all below 18.79 and control efficacy over 80.53%. The four formulations are ideal high-efficiency compound formulations for the prevention and control of sugarcane brown rust. They can be sprayed manually and by unmanned aerial vehicles on the foliar surface from July to August, once every 7 to 10 d, continuously for 2 times. [Conclusions] This study provides new technical support for accurate and efficient prevention and control of sugarcane rust.

Evaluation of the Effect of High-efficiency Compound Formulations on the Prevention and Control of Sugarcane Brown Stripe

[Objectives]This study was conducted to screen high-efficiency compound formulations and precise application technologies for the prevention and control of sugarcane brown stripe disease.[Methods]Carbendazim,benomyl,chlorothalonil,azoxystrobin,pyraclostrobine and difenoconazole·azoxystrobin were selected for field efficacy tests.[Results]Three formulations,(50%carbendazim WP 1500 g+75%chlorothalonil WP 1500 g+potassium dihydrogen phosphate 2400 g+agricultural synergist 300 ml)/hm^(2),(50%benomyl WP 1500 g+75%chlorothalonil WP 1500 g+potassium dihydrogen phosphate 2400 g+agricultural synergist 300 ml)/hm^(2) and(25%pyraclostrobin 600 ml+potassium dihydrogen phosphate 2400 g+agricultural synergist 300 ml)/hm^(2) had good control effects on sugarcane brown stripe disease,and showed disease index below 14.02 and control efficacy above 84.41%.The three formulations are ideal high-efficiency compound formulations for the prevention and control of sugarcane brown stripe disease.They can be sprayed manually and by unmanned aerial vehicles on the foliar surface from July to August,once every 7 to 10 d,continuously for 2 times.[Conclusions]This study provides new technical support for accurate and efficient prevention and control of sugarcane brown stripe disease.

Reliable evaluation method of quality control for compressive strength of concrete

Concrete in reinforced concrete structure (RC) is generally under significant compressive stress load. To guarantee required quality and ductility, various tests have to be conducted to measure the concrete’s compressive strength based on ACI (American Concrete Institute) code. Investigations of recent devastating collapses of structures around the world showed that some of the collapses directly resulted from the poor quality of the concrete. The lesson learned from these tragedies is that guaranteeing high quality of concrete is one of the most important factors ensuring the safety of the reinforced concrete structure. In order to ensure high quality of concrete, a new method for analyzing and evaluating the concrete production process is called for. In this paper, the indices of fit and stable degree are proposed as basis to evaluate the fitness and stability of concrete’s compressive strength. These two indices are combined to define and evaluate the quality index of the compressive strength of concrete. Prin-ciples of statistics are used to derive the best estimators of these indices. Based on the outcome of the study, a concrete compres-sive strength quality control chart is proposed as a tool to help the evaluation process. Finally, a new evaluation procedure to assess the quality control capability of the individual concrete manufacturer is also proposed.