This paper studies the dynamic stress intensity factor （DSIF） at the interface in an adhesive joint under shear loading. Material damage is considered. By introducing the dislocation density function and using the i...This paper studies the dynamic stress intensity factor （DSIF） at the interface in an adhesive joint under shear loading. Material damage is considered. By introducing the dislocation density function and using the integral transform, the problem is reduced to algebraic equations and can be solved with the collocation dots method in the Laplace domain. Time response of DSIF is calculated with the inverse Laplace integral transform. The results show that the mode Ⅱ DSIF increases with the shear relaxation parameter, shear module and Poisson ratio, while decreases with the swell relaxation parameter. Damage shielding only occurs at the initial stage of crack propagation. The singular index of crack tip is -0.5 and independent on the material parameters, damage conditions of materials, and time. The oscillatory index is controlled by viscoelastic material parameters.展开更多
The selective cleavage of C-O and C-C is facing a challenge in the field of catalysis.In the present work,we studied the influence of doped Ni on the structure and electronic properties,as well as the selective C-O/C-...The selective cleavage of C-O and C-C is facing a challenge in the field of catalysis.In the present work,we studied the influence of doped Ni on the structure and electronic properties,as well as the selective C-O/C-C bond cleavages in the hydrodeoxygenation of palmitic acid over Ni-Mo_(2)C catalyst.The catalytic activity on Ni doped Mo_(2)C with TOF of 6.9×10^(3)h^(-1)is much superior to intrinsic Mo_(2)C catalyst,which is also higher than most noble metal catalysts.Structurally,the doped Ni raises the active particle dispersion and the coordination numbers of Mo species(Mo-C and Mo-O),improves the graphitization degree to promote the electron transfer,and increases the amount of Lewis and Br?nsted acid,which are responsible for the excellent hydrodeoxygenation performance.The Ni promotes simultaneously C-O and C-C bonds cleavage to produce pentadecane and hexadecane owing to the increase of electron-rich Mo sites after Ni doping.These findings contribute to the understanding of the nature of Ni-doped Mo_(2)C on the roles as catalytic active sites for C-O and C-C bonds cleavage.展开更多
Fatigue crack growth test of cracked metallic plate repaired with adhesive bonding composite patch was conducted to study the fracture behavior of crack patching. The failure mode was that crack grows along with adhes...Fatigue crack growth test of cracked metallic plate repaired with adhesive bonding composite patch was conducted to study the fracture behavior of crack patching. The failure mode was that crack grows along with adhesive debonding. The crack length and debonding area were measured at different numbers of cycles. The nonlinear three- dimensional(3D)finite element(FE)model considering adhesive debonding and crack growth simultaneously was developed. The experimental and analytical results were in good agreement with each other.展开更多
Peridynamics(PD)is a non-localmechanics theory that overcomes the limitations of classical continuummechanics(CCM)in predicting the initiation and propagation of cracks.However,the calculation efficiency of PDmodels i...Peridynamics(PD)is a non-localmechanics theory that overcomes the limitations of classical continuummechanics(CCM)in predicting the initiation and propagation of cracks.However,the calculation efficiency of PDmodels is generally lower than that of the traditional finite elementmethod(FEM).Structural idealization can greatly improve the calculation efficiency of PD models for complex structures.This study presents a PD shell model based on the micro-beam bond via the homogenization assumption.First,the deformations of each endpoint of themicro-beam bond are calculated through the interpolation method.Second,the micro-potential energy of the axial,torsional,and bending deformations of the bond can be established from the deformations of endpoints.Finally,the micro moduli of the shellmodel can be obtained via the equivalence principle of strain energy density(SED).In addition,a new fracture criterion based on the SED of the micro-beam bond is adopted for crack simulation.Numerical examples of crack propagation are provided,and the results demonstrate the effectiveness of the proposed PD shell model.展开更多
The lifetime of Si bond coatings in environmental barrier coatings is constrained by phase-transition-induced cracking of the SiO_(2)scale.In this study,Si-HfO_(2)dual-state duplex composite materials are proposed to ...The lifetime of Si bond coatings in environmental barrier coatings is constrained by phase-transition-induced cracking of the SiO_(2)scale.In this study,Si-HfO_(2)dual-state duplex composite materials are proposed to address this issue by partially forming HfSiO_(4)and minimizing the SiO_(2)content.The as-prepared composite exhibited a structure comprising discrete HfO_(2)“bricks”embedded in a continuous Si“mortar”,while the oxidized state transformed into discrete HfSiO_(4)“bricks”within continuous thin SiO_(2)“mortars”.The results indicate that continuous thin SiO_(2)contributes to reducing the oxidation rate to a level comparable to that of pure Si,and discrete HfSiO_(4)particles aid in relieving phase transition-induced stress and inhibiting crack propagation,thereby enhancing oxidation and cracking resistance simultaneously.Consequently,the composite with 20 mol%HfO_(2)and a mean particle size of~500 nm at 1370℃exhibited a service lifetime 10 times greater than that of pure Si.This research provides valuable insights for designing Si-based bond coatings with improved service lifetime.展开更多
In many situations rocks are subjected to biaxial loading and the failure process is controlled by the lateral confinement stresses. The importance of confinement stresses has been recognized in the literature by many...In many situations rocks are subjected to biaxial loading and the failure process is controlled by the lateral confinement stresses. The importance of confinement stresses has been recognized in the literature by many researchers, in particular, its influence on strength and on the angle of fracture, but still there is not a clear description for the influence of confining stress on the crack propagation mechanism of rocks. This paper presents a numerical pro- cedure for the analysis of crack propagation in rock-like ma- terials under compressive biaxial loads. Several numerical simulations of biaxial tests on the rock specimen have been carried out by a bonded particle model （BPM） and the influ- ence of confinement on the mechanism of crack propagation from a single flaw in rock specimens is studied. For this purpose, several biaxial compressive tests on rectangular spec- imens under different confinement stresses were modeled in （2 dimensional particle flow code） PFC2D. The results show that wing cracks initiate perpendicular to the flaw and trend toward the direction of major stress, however, when the lat- eral stresses increase, this initiation angle gets wider. Also it is concluded that in addition to the material type, the initiation direction of the secondary cracks depends on confine- ment stresses, too. Besides, it is understood that secondary cracks may be produced from both tensile and shear mechanisms.展开更多
基金the National Natural Science Foundation of China(No.10672027)the National Basic Research Program of China(No.2006CB601205)the National Science Fund for Distin-guished Young Scholars of China(No.50625414)
文摘This paper studies the dynamic stress intensity factor （DSIF） at the interface in an adhesive joint under shear loading. Material damage is considered. By introducing the dislocation density function and using the integral transform, the problem is reduced to algebraic equations and can be solved with the collocation dots method in the Laplace domain. Time response of DSIF is calculated with the inverse Laplace integral transform. The results show that the mode Ⅱ DSIF increases with the shear relaxation parameter, shear module and Poisson ratio, while decreases with the swell relaxation parameter. Damage shielding only occurs at the initial stage of crack propagation. The singular index of crack tip is -0.5 and independent on the material parameters, damage conditions of materials, and time. The oscillatory index is controlled by viscoelastic material parameters.
基金financially supported by the National Natural Science Foundation of China(21972099)the Application Foundation Program of Sichuan Province(2021YJ0305)+1 种基金the 111 project(B17030).Shanghai Synchrotron Radiation Facility(SSRF)for XAS experiments and the support by the project from NPL of CAEP(2019BB08)。
文摘The selective cleavage of C-O and C-C is facing a challenge in the field of catalysis.In the present work,we studied the influence of doped Ni on the structure and electronic properties,as well as the selective C-O/C-C bond cleavages in the hydrodeoxygenation of palmitic acid over Ni-Mo_(2)C catalyst.The catalytic activity on Ni doped Mo_(2)C with TOF of 6.9×10^(3)h^(-1)is much superior to intrinsic Mo_(2)C catalyst,which is also higher than most noble metal catalysts.Structurally,the doped Ni raises the active particle dispersion and the coordination numbers of Mo species(Mo-C and Mo-O),improves the graphitization degree to promote the electron transfer,and increases the amount of Lewis and Br?nsted acid,which are responsible for the excellent hydrodeoxygenation performance.The Ni promotes simultaneously C-O and C-C bonds cleavage to produce pentadecane and hexadecane owing to the increase of electron-rich Mo sites after Ni doping.These findings contribute to the understanding of the nature of Ni-doped Mo_(2)C on the roles as catalytic active sites for C-O and C-C bonds cleavage.
文摘Fatigue crack growth test of cracked metallic plate repaired with adhesive bonding composite patch was conducted to study the fracture behavior of crack patching. The failure mode was that crack grows along with adhesive debonding. The crack length and debonding area were measured at different numbers of cycles. The nonlinear three- dimensional(3D)finite element(FE)model considering adhesive debonding and crack growth simultaneously was developed. The experimental and analytical results were in good agreement with each other.
基金funded by Project of the National Natural Science Foundation of China(Grant No.11872017).
文摘Peridynamics(PD)is a non-localmechanics theory that overcomes the limitations of classical continuummechanics(CCM)in predicting the initiation and propagation of cracks.However,the calculation efficiency of PDmodels is generally lower than that of the traditional finite elementmethod(FEM).Structural idealization can greatly improve the calculation efficiency of PD models for complex structures.This study presents a PD shell model based on the micro-beam bond via the homogenization assumption.First,the deformations of each endpoint of themicro-beam bond are calculated through the interpolation method.Second,the micro-potential energy of the axial,torsional,and bending deformations of the bond can be established from the deformations of endpoints.Finally,the micro moduli of the shellmodel can be obtained via the equivalence principle of strain energy density(SED).In addition,a new fracture criterion based on the SED of the micro-beam bond is adopted for crack simulation.Numerical examples of crack propagation are provided,and the results demonstrate the effectiveness of the proposed PD shell model.
基金This study is supported by the Postdoctoral Innovative Talent Support Program(No.BX2021238)the National Natural Science Foundation of China(No.U22A20110)the Natural Science Foundation of Suzhou(No.SYG202103).
文摘The lifetime of Si bond coatings in environmental barrier coatings is constrained by phase-transition-induced cracking of the SiO_(2)scale.In this study,Si-HfO_(2)dual-state duplex composite materials are proposed to address this issue by partially forming HfSiO_(4)and minimizing the SiO_(2)content.The as-prepared composite exhibited a structure comprising discrete HfO_(2)“bricks”embedded in a continuous Si“mortar”,while the oxidized state transformed into discrete HfSiO_(4)“bricks”within continuous thin SiO_(2)“mortars”.The results indicate that continuous thin SiO_(2)contributes to reducing the oxidation rate to a level comparable to that of pure Si,and discrete HfSiO_(4)particles aid in relieving phase transition-induced stress and inhibiting crack propagation,thereby enhancing oxidation and cracking resistance simultaneously.Consequently,the composite with 20 mol%HfO_(2)and a mean particle size of~500 nm at 1370℃exhibited a service lifetime 10 times greater than that of pure Si.This research provides valuable insights for designing Si-based bond coatings with improved service lifetime.
文摘In many situations rocks are subjected to biaxial loading and the failure process is controlled by the lateral confinement stresses. The importance of confinement stresses has been recognized in the literature by many researchers, in particular, its influence on strength and on the angle of fracture, but still there is not a clear description for the influence of confining stress on the crack propagation mechanism of rocks. This paper presents a numerical pro- cedure for the analysis of crack propagation in rock-like ma- terials under compressive biaxial loads. Several numerical simulations of biaxial tests on the rock specimen have been carried out by a bonded particle model （BPM） and the influ- ence of confinement on the mechanism of crack propagation from a single flaw in rock specimens is studied. For this purpose, several biaxial compressive tests on rectangular spec- imens under different confinement stresses were modeled in （2 dimensional particle flow code） PFC2D. The results show that wing cracks initiate perpendicular to the flaw and trend toward the direction of major stress, however, when the lat- eral stresses increase, this initiation angle gets wider. Also it is concluded that in addition to the material type, the initiation direction of the secondary cracks depends on confine- ment stresses, too. Besides, it is understood that secondary cracks may be produced from both tensile and shear mechanisms.
