The corrosion inhibition characteristics of aqueous extract of seeds of Melia azedarach L.(MA) have been studied as eco-friendly green inhibitor for corrosion control of C-steel in 2 mol·L^(-1) HCl solution by gr...The corrosion inhibition characteristics of aqueous extract of seeds of Melia azedarach L.(MA) have been studied as eco-friendly green inhibitor for corrosion control of C-steel in 2 mol·L^(-1) HCl solution by gravimetric and electrochemical methods. The results depict that, the extract inhibits efficiently the corrosion of carbon steel in hydrochloric acid. The efficiency of extract is increased with increasing the extract concentration but independent on the studied temperature. The adsorption of the extract components onto the steel surface was found to be spontaneous, and follows Langmuir adsorption isotherm. The surface morphology of C-steel, in the absence and presence of MA extract in 2.0 mol·L^(-1) hydrochloric acid solution, was studied using scanning electron microscopy(SEM).展开更多
The protection influence of 8-hydroxy-7-quinolinecarboxaldehyde derivatives against C-steel corrosion was studied in 2 mol·L^(-1)HCl solutions at 30 °C. Measurements were conducted under various experimental...The protection influence of 8-hydroxy-7-quinolinecarboxaldehyde derivatives against C-steel corrosion was studied in 2 mol·L^(-1)HCl solutions at 30 °C. Measurements were conducted under various experimental conditions using weight loss, potentiodynamic polarization, electrochemical impedance spectroscopy(EIS) and electrochemical frequency modulation(EFM) techniques. These studies have shown that 8-hydroxy-7-quinolinecarboxaldehyde derivatives are very good "green", mixed-type inhibitors. Corrosion rates obtained from both EFM and EIS methods are comparable with those recorded using Tafel extrapolation method, confirming validation of corrosion rates measured by the latter. The inhibitive action of these 8-hydroxy-7-quinolinecarboxaldehyde derivatives was discussed in terms of blocking the electrode surface by adsorption of the molecules through the active centers contained in their structures following Langmuir adsorption isotherm. Quantum chemical method was also employed to explore the relationship between the inhibitor molecular properties and its protection efficiency.展开更多
Oxide scale formation on a C-steel surface has been investigated using linear heating rates ranging from 0.1℃/min to 10℃/min at high temperatures. The studies on the oxide scale formation at high temperature (650℃)...Oxide scale formation on a C-steel surface has been investigated using linear heating rates ranging from 0.1℃/min to 10℃/min at high temperatures. The studies on the oxide scale formation at high temperature (650℃) at slower heating rate (0.1℃/min) shows that the kinetic regime is linear. X-ray diffraction measurements revealed that the scale constituents are significantly influenced by the heating rate. The adherence of the scale was improved by using slower heating rate (0.1℃/min-≤650℃), while above such degree the scale was susceptible to cracking and flaking out of the alloy surface. In fact, the development of oxide growth stresses can cause considerable scale cracking. As well, variation of the crystallite sizes under the aforementioned conditions might affect the scale stacking to the alloy surface. The secondary electron detector images of the oxide scale shows that the scale was imperfectly smooth and there were a number of voids and defects in the scale skin, especially at fast heating rate. This observation could be attributed to defects of the as-received alloy. In general, slower heating rate reduced the defects of the scale and improved its adherence.展开更多
文摘The corrosion inhibition characteristics of aqueous extract of seeds of Melia azedarach L.(MA) have been studied as eco-friendly green inhibitor for corrosion control of C-steel in 2 mol·L^(-1) HCl solution by gravimetric and electrochemical methods. The results depict that, the extract inhibits efficiently the corrosion of carbon steel in hydrochloric acid. The efficiency of extract is increased with increasing the extract concentration but independent on the studied temperature. The adsorption of the extract components onto the steel surface was found to be spontaneous, and follows Langmuir adsorption isotherm. The surface morphology of C-steel, in the absence and presence of MA extract in 2.0 mol·L^(-1) hydrochloric acid solution, was studied using scanning electron microscopy(SEM).
文摘The protection influence of 8-hydroxy-7-quinolinecarboxaldehyde derivatives against C-steel corrosion was studied in 2 mol·L^(-1)HCl solutions at 30 °C. Measurements were conducted under various experimental conditions using weight loss, potentiodynamic polarization, electrochemical impedance spectroscopy(EIS) and electrochemical frequency modulation(EFM) techniques. These studies have shown that 8-hydroxy-7-quinolinecarboxaldehyde derivatives are very good "green", mixed-type inhibitors. Corrosion rates obtained from both EFM and EIS methods are comparable with those recorded using Tafel extrapolation method, confirming validation of corrosion rates measured by the latter. The inhibitive action of these 8-hydroxy-7-quinolinecarboxaldehyde derivatives was discussed in terms of blocking the electrode surface by adsorption of the molecules through the active centers contained in their structures following Langmuir adsorption isotherm. Quantum chemical method was also employed to explore the relationship between the inhibitor molecular properties and its protection efficiency.
文摘Oxide scale formation on a C-steel surface has been investigated using linear heating rates ranging from 0.1℃/min to 10℃/min at high temperatures. The studies on the oxide scale formation at high temperature (650℃) at slower heating rate (0.1℃/min) shows that the kinetic regime is linear. X-ray diffraction measurements revealed that the scale constituents are significantly influenced by the heating rate. The adherence of the scale was improved by using slower heating rate (0.1℃/min-≤650℃), while above such degree the scale was susceptible to cracking and flaking out of the alloy surface. In fact, the development of oxide growth stresses can cause considerable scale cracking. As well, variation of the crystallite sizes under the aforementioned conditions might affect the scale stacking to the alloy surface. The secondary electron detector images of the oxide scale shows that the scale was imperfectly smooth and there were a number of voids and defects in the scale skin, especially at fast heating rate. This observation could be attributed to defects of the as-received alloy. In general, slower heating rate reduced the defects of the scale and improved its adherence.
