Anatomic location of the first dorsal extensor compartment for surgical De-Quervain’s tenosynovitis release:A cadaveric study

BACKGROUND De-Quervain’s tenosynovitis is a disorder arising from the compression and irritation of the first dorsal extensor compartment of the wrist.Patients who fail conservative treatment modalities are candidates for surgical release.However,risks with surgery include damage to the superficial radial nerve and an incomplete release due to inadequate dissection.Currently,there is a paucity of literature demonstrating the exact anatomic location of the first dorsal extensor compartment in reference to surface anatomy.Thus,this cadaveric study was performed to determine the exact location of the first extensor compartment and to devise a reliable surgical incision to prevent complications.AIM To describe the location of the first dorsal compartment in relation to bony surface landmarks to create replicable surgical incisions.METHODS Six cadaveric forearms,including four left and two right forearm specimens were dissected.Dissections were performed by a single fellowship trained upper extremity orthopaedic surgeon.Distance of the first dorsal compartment from landmarks such as Lister’s tubercle,the wrist crease,and the radial styloid were calculated.Other variables studied included the presence of the superficial radial nerve overlying the first dorsal compartment,additional compartment subsheaths,number of abductor pollicis longus(APL)tendon slips,and the presence of a pseudo-retinaculum.RESULTS Distance from the radial most aspect of the wrist crease to the extensor retinaculum was 5.14 mm±0.80 mm.The distance from Lister’s tubercle to the distal aspect of the extensor retinaculum was 13.37 mm±2.94 mm.Lister’s tubercle to the start of the first dorsal compartment was 18.43 mm±2.01 mm.The radial styloid to the initial aspect of the extensor retinaculum measured 2.98 mm±0.99 mm.The retinaculum length longitudinally on average was 26.82 mm±3.34 mm.Four cadaveric forearms had separate extensor pollicis brevis compartments.The average number of APL tendon slips was three.A pseudo-retinaculum was present in four cadavers.Two cadavers had a superficial radial nerve that crossed over the first dorsal compartment and retinaculum proximally(7.03 mm and 13.36 mm).CONCLUSION An incision that measures 3 mm proximal from the radial styloid,2 cm radial from Lister’s tubercle,and 5 mm proximal from the radial wrist crease will safely place surgeons at the first dorsal compartment.

Bridge plating in the setting of radiocarpal instability:Does distal fixation to the second or third metacarpal matter?A cadaveric study

BACKGROUND Radiocarpal dislocations are rare but potentially devastating injuries.Poorer outcomes are associated with inadequate or lost reduction,such as ulnar translocation,but no consensus exists on the ideal fixation technique.Dorsal bridge plate fixation has been described for various settings in the treatment of complex distal radius fractures and can be fixed distally to the second or third metacarpal,but its application for radiocarpal dislocations has not been established.AIM To determine whether distal fixation to the second or third metacarpal matters.METHODS Using a cadaveric radiocarpal dislocation model,the effect of distal fixation was studied in two stages:(1)A pilot study that investigated the effect of distal fixation alone;and(2)a more refined study that investigated the effect of described techniques for distal and proximal fixation.Radiographs were measured in various parameters to determine the quality of the reduction achieved.RESULTS The pilot study found that focusing on distal fixation alone without changing proximal fixation results in ulnar translocation and volar subluxation when fixing distally to the second metacarpal compared with the third.The second iteration demonstrated that anatomic alignment in coronal and sagittal planes could be achieved with each technique.CONCLUSION In a cadaveric radiocarpal dislocation model,anatomic alignment can be maintained with bridge plate fixation to the second metacarpal or the third metacarpal if the described technique is followed.When considering dorsal bridge plate fixation for radiocarpal dislocations,the surgeon is encouraged to understand the nuances of different fixation techniques and how implant design features may influence proximal placement.

Role of Fresh Cadaver Practice and Jesus Prayers on Daily Base in Innovations of a Difficult Neurosurgical Operation (Craniopagus Separation)

Purpose: Challenging cases in neurosurgery require experience, which is gained by operating on a number of similarly difficult cases. However, even in large population centers, there are extremely rare cases, such as craniopagus twins. In these instances, other case-specific solutions are required which were improved in the course of fresh cadaver practice on daily base. Methods: During a 20-month preparation period by fresh cadavers the surgical strategy was developed step by step, comprising five neurosurgical ideas, facilitated by deep Jesus prayers as a spiritual source. Possible causes of postoperative complications that occured on 33d postoperative day were also analyzed. Results: During surgery, these nuances proved to be useful, which is also reflected by the postoperative clinical results. One of the twins advanced to a GOS score of 5three months after the surgery. The other twin, despite nonsurgical septic complications, continued to progress well, but on postoperative day 33 for seemingly unknown reasons, she suffered a severe cerebral hemorrhage, which significantly delayed her rehabilitation. A thorough revision of the whole process much later revealed a pitfall that could have a role in this complication. Conclusions: The challenging neurosurgical separation of the craniopagus twins was carried out successfully with the help of five novel neurosurgical refinements, which were found during 300 fresh cadaver practices. Mistakes can serve as a lesson. We hope that the procedures developed and the knowledge gained can be applied in the future.

Complications of Learning Curve in Supratentorial Intraventricular Region. The Concept of Fast Daily Fresh Cadaver Practice. (Technical Note for Training Method)

Background: The difficulty of learning curve in different microsurgical regions is one of the most challenging factors that affect neurosurgeon’s life. Two of the delicate areas are the suprasellar intraventricular and pontocerebellar region. High level of microsurgery or endoscopic surgery requires virtuosity, which can not be learnt only by assisting. Even among the well skilled neurosurgeons who work in big centers we can often hear “in spite of centralization there are not enough operations available to keep the high level of our skills”. The situation of surgeons working at mid centers is more difficult especially on duties. Methods: Huge number of scientific articles demonstrate the importance of different types of cadaver practice, but always did not pay enough attention to the daily fast fresh cadaver exercises. Focusing on lifelong every day practice we examined the difficulties of learning curve in intraventricular and pontocerebellar region and try to give some useful advice for practicing on fresh cadavers on a daily basis. We offer a simple endovascular fresh cadaver model for practicing. Results: We have performed more than 800 quick (60 - 90 minutes long) routine practice sessions in these two regions during last 18 years. We found that implantation a modelized pathology and removing it by microscopical or endoscopic way without causing injuries to sensitive structures seems to be the most practical way of fast everyday training. Nerves and vascular bypass sutures are also excellent practical method. Conclusions: We have focused on daily fast fresh cadaver practice as a novel training method like used in professional sport and art. After 18 years experience we can state that, for mastering the microsurgery of pontocerebellar and intraventricular region, which is one of the most challenging regions minimum 100 fresh cadaver practice sessions need before performing the operation. We believe this region should be part of fast fresh cadaver microsurgical practice routine programme on daily bases, minimum one time/week/person.

Extrahepatic portacaval shunt via a magnetic compression technique: A cadaveric feasibility study

AIM: To explore the anatomical feasibility of portacaval shunt using a magnetic compression technique(MCT) in cadavers.METHODS: Computed tomography(CT) images of 30 portal hypertensive patients were obtained.The diameters of the portal vein(PV),the inferior vena cava(IVC),and distance between the two structures were measured.Similar measurements were performed on 20 adult corpses.The feasibility of portacaval shunt based on those measurements was analyzed.First stage of the extrahepatic portacaval shunt using MCT was performed on five cadavers.Specifically,the PV and IVC were exposed through an abdominal incision of the cadavers.The parent magnet was introduced from the femoral vein and was delivered into the IVC by an anchor wire and a 5F Cook catheter.The daughter magnet was introduced into the PV through the splenic vein using aninterventional guide wire.When the daughter magnet met the parent magnet,they automatically clipped together and the first stage of the portacaval shunt was set up.RESULTS: The average diameters of the PV and the IVC measured from the 30 CT image were 14.39 ± 2.36 mm and 18.59 ± 4.97 mm,respectively,and the maximum and minimum distances between the PV and the IVC were 9.79 ± 4.56 mm and 9.50 ± 4.79 mm,respectively.From 20 cadavers,the average diameters of the PV and the IVC were 14.48 ± 1.47 mm and 24.71 ± 2.64 mm,and the maximum and minimum distances between the PV and the IVC were 10.14 ± 1.70 mm and 8.93 ± 1.17 mm,respectively.The distances between the PV and the IVC from both the CT images and the cadavers were within the effective length of portacaval anastomosis using MCT(30.30 ± 4.19 mm).The PV and IVC are in close proximity to each other with no intervening tissues or structures in between.Simulated surgeries of the first stage using MCT on five cadavers was successfully performed.CONCLUSION: Anatomically,extrahepatic portacaval shunt employing MCT is highly feasible in humans.

3T magnetic resonance neurography of pudendal nerve with cadaveric dissection correlation

AIM: To evaluate the pudendal nerve segments that could be identified on magnetic resonance neurography(MRN) before and after surgical marking of different nerve segments.METHODS: The hypothesis for this study was that pudendal nerve and its branches would be more easily seen after the surgical nerve marking. Institutional board approval was obtained. One male and one female cadaver pelvis were obtained from the anatomy board and were scanned using 3 Tesla MRI scanner using MR neurography sequences. All possible pudendal nerve branches were identified. The cadavers were then sent to the autopsy lab and were surgically dissected by a peripheral nerve surgeon and an anatomist to identify the pudendal nerve branches. Radiological markers were placed along the course of the pudendal nerve and its branches. The cadavers were then closed and rescanned using the same MRN protocol as the premarking scan. The remaining pudendal nerve branches were attempted to be identified using the radiological markers. All scans were read by an experienced musculoskeletal radiologist.RESULTS: The pre-marking MR Neurography scans clearly showed the pudendal nerve at its exit from the lumbosacral plexus in the sciatic notch, at the level of the ischial spine and in the Alcock's Canal in both cadavers. Additionally, the right hemorrhoidal branch could be identified in the male pelvis cadaver. The perineal and distal genital branches could not be identified. On post-marking scans, the markers were used as identifiable structures. The location of the perineal branch, the hemorroidal branch and the dorsal nerve to penis(in male cadaver)/clitoris(in female cadaver) could be seen. However, the visualization of these branches was suboptimal. The contralateral corresponding nerves were poorly seen despite marking on the surgical side. The nerve was best seen on axial T1W and T2W SPAIR images. The proximal segment could be seen well on 3D DW PSIF sequence. T2W SPACE was not very useful in visualization of this small nerve or its branches.CONCLUSION: Proximal pudendal nerve is easily seen on MR neurography, however it is not possible to identify distal branches of the pudendal nerve even after surgical marking.

Olecranon anatomy:Use of a novel proximal interlocking screw for intramedullary nailing,a cadaver study

AIM: To define the optimum safe angle of use for an eccentrically aligned proximal interlocking screw(PIS) for intramedullary nailing(IMN).METHODS: Thirty-six dry cadaver ulnas were split into two equal pieces sagitally. The following points were identified for each ulna: the deepest point of the incisura olecrani(A), the point where perpendicular lines from A and the ideal IMN entry point(D) are intersected(C) and a point at 3.5 mm(2 mm safety distance from articular surface + 1.5 mm radius of PIS) posterior from point A(B). We calculated the angle of screws inserted from point D through to point B in relation to D-C and B-C. In addition, an eccentrically aligned screw was inserted at a standard 20° through the anterior cortex of the ulna in each bone and the articular surface wasobserved macroscopically for any damage.RESULTS: The mean A-C distance was 9.6 mm(mean ± SD, 9.600 ± 0.763 mm), A-B distance was 3.5 mm, C-D distance was 12.500 mm(12.500 ± 1.371 mm) and the mean angle was 25.9°(25.9°± 2.0°). Lack of articular damage was confirmed macroscopically in all bones after the 20.0° eccentrically aligned screws were inserted. Intramedullary nail fixation systems have well known biological and biomechanical advantages for osteosynthesis. However, as well as these well-known advantages, IMN fixation of the ulna has some limitations. Some important limitations are related to the proximal interlocking of the ulna nail. The location of the PIS itself limits the indications for which intramedullary systems can be selected as an implant for the ulna. The new PIS design, where the PIS is aligned 20°eccentrically to the nail body, allows fixing of fractures even at the level of the olecranon without disturbing the joint. It also allows the eccentrically aligned screw to be inserted in any direction except through the proximal radio-ulnar joint. Taking into consideration our results, we now use a 20° eccentrically aligned PIS for all ulnas. In our results, the angle required to insert the PIS was less than 20° for only one bone. However, 0.7° difference corresponds to placement of the screw only 0.2 mm closer to the articular surface. As we assume 2.0 mm to be a safe distance, a placement of the screw 0.2 mm closer to the articular surface may not produce any clinical symptoms.CONCLUSION: The new PIS may give us the opportunity to interlock IMN without articular damage and confirmation by fluoroscopy if the nail is manufactured with a PIS aligned at a 20.0° fixed angle in relation to the IMN.

Comminuted olecranon fracture fixation with pre-contoured plate:Comparison of composite and cadaver bones

AIM: To determine whether use of a precontoured olecranon plate provides adequate fixation to withstand supraphysiologic force in a comminuted olecranon fracture model.METHODS: Five samples of fourth generation composite bones and five samples of fresh frozen human cadaveric left ulnae were utilized for this study. The cadaveric specimens underwent dual-energy X-ray absorptiometry(DEXA) scanning to quantify the bone quality. The composite and cadaveric bones were prepared by creating a comminuted olecranon fracture and fixed with a pre-contoured olecranon plate with locking screws. Construct stiffness and failure load were measured by subjecting specimens to cantilever bending moments until failure. Fracture site motion was measured with differential variable resistance transducer spanning the fracture. Statistical analysis was performed with two-tailed Mann-Whitney-U test with Monte Carlo Exact test.RESULTS: There was a significant difference in fixation stiffness and strength between the composite bones and human cadaver bones. Failure modes differed in cadaveric and composite specimens. The load to failure for the composite bones(n = 5) and human cadaver bones(n = 5) specimens were 10.67 nm(range 9.40-11.91 nm) and 13.05 nm(range 12.59-15.38 nm) respectively. This difference was statistically significant(P ? 0.007, 97% power). Median stiffness for composite bones and human cadaver bones specimens were 5.69 nm/mm(range 4.69-6.80 nm/mm) and 7.55 nm/mm(range 6.31-7.72 nm/mm). There was a significant difference for stiffness(P ? 0.033, 79% power) between composite bones and cadaveric bones. No correlation was found between the DEXA results and stiffness. All cadaveric specimens withstood the physiologic load anticipated postoperatively. Catastrophic failure occurred in all composite specimens. All failures resulted from composite bone failure at the distal screw site and not hardware failure. There were no catastrophic fracture failures in the cadaveric specimens. Failure of 4/5 cadaveric specimens was defined when a fracture gap of 2 mm was observed, but 1/5 cadaveric specimens failed due to a failure of the triceps mechanism. All failures occurred at forces greater than that expected in postoperative period prior to healing.CONCLUSION: The pre-contoured olecranon plate provides adequate fixation to withstand physiologic force in a composite bone and cadaveric comminuted olecranon fracture model.

Prevalence and characteristics of gallstone disease in an Iranian population:a study on cadavers

BACKGROUND:The prevalence of gallstones is low in Asians.In Iran,many factors influence the prevalence of this disease.The aim of this study was to determine the prevalence of gallbladder stones and their chemical characteristics in a population by the study of cadavers. METHODS:In this cross-sectional study,autopsies were performed on 253 cadavers of more than 13 years old.The cadavers were studied to determine the number,location of stone formation,chemical composition,dry weight,and mean diameter of stones in the gallbladder and common bile duct. RESULTS:The prevalence of gallstone disease in these cadavers was 6.3%(men 4.7%,women 8.6%,not significantly different,P=0.216).There was a positive relationship between the age and prevalence of gallstone disease(P=0.033).The most common stone compositions were cholesterol and oxalate.The mean diameter (P=0.0058)and dry weight(P<0.0001)of stones were higher in the gallbladder than in the common bile duct. Positive relations between the amount of oxalate and mean diameter,and between the amount of oxalate and mean dry weight of gallstones were found,but the relationship between the amount of cholesterol and mean diameter was inverse. CONCLUSIONS:The prevalence of gallstones differed among age groups.Diameter and dry weight of gallstones were dependent on location of stone formation and chemical composition.

Role of the posterior deep deltoid ligament in ankle fracture stability: A biomechanical cadaver study

BACKGROUND The deltoid ligament is a key component of ankle fracture stability.Clinical tests to assess deltoid ligament injury have low specificity.In supination externalrotation(SER)type-IV ankle fractures,there is either a medial malleolus fracture or deltoid ligament injury.These injuries are often considered unstable,requiring surgical stabilisation.We look to identify the anatomical basis for this instability.This study investigates the anatomical basis for such instability by re-creating SER type ankle fractures in a standardised cadaveric study model,investigating the anatomical basis for such instability.AIM To investigate the anatomical basis for fracture instability in SER type ankle fractures.METHODS Four matched pairs of cadaveric limbs were tested for stability both when axially loaded and under external rotation stress.Four matched pairs of cadaveric limbs(8 specimens)were tested for stability when axially loaded to 750 N with a custom rig.Specimens were tested through increasing stages of SER injury in a stepwise fashion before restoring the lateral side with open reduction and internal fixation(ORIF).Clinical photographs and radiographs were recorded at each step.We defined instability in accordance with well accepted radiological parameters:>4 mm medial clear space opening on a mortise-view radiograph or>7 degrees of talar tilt.RESULTS All specimens with an intact posterior deep deltoid ligament were stable.Once the posterior deep deltoid ligament was sectioned there was instability in all specimens.Stabilisation of the lateral side prevented talar shift,but not talar tilt.CONCLUSION If the posterior deep deltoid ligament is intact then SER fractures can be managed without surgery.If the posterior deep deltoid is incompetent,ORIF and cautious rehabilitation is recommended because the talus can still tilt in the mortise.

Partial Least Squares Structural Equation Path Modelling Determined Predictors of Students Reported Human Cadaver Dissection Activity

Human cadaver dissection remains a core and preferred method of anatomical instruction at most low- and middle-income health professional training institutions. Dissection, which is both traumatic and stressful, sets the tone of the students’ responses to later and or similar stressful learning opportunities like the post-mortems or care for terminally ill patients. Partial least squares structural equation modelling was used to determine the effect of the students’: personality, perception of the learning environment, learning approach, and effect of the environment on the student, on undergraduate health professional student’s activity in the human cadaver dissection room. This was a secondary analysis of previously collected data from a cross sectional survey of undergraduate health professional students. We found that personality type and perception of the environment had a positive effect on dissection room activity. Approach to learning and being affected by the dissection room experience (impact), had a negative effect on dissection room activity. All the above effects on dissection room activity were not significant. This study showed that personality, perception of the learning environment, learning approach and effect of the environment on the student, had effects on undergraduate health professional student’s activity in the human cadaver dissection room. The modelled effects are opportunities for educational interventions aimed at increasing student activity in the dissection room.

Cross-Over Assessment of the AmbuAuraGain, LMA Supreme New Cuff and Intersurgical I-Gel in Fresh Cadavers

Background: The AmbuAuraGain is a new single-use supraglottic airway device with gastric channel designed to facilitate intubation. The aim of the study was to assess the anatomic position and the performance of the AuraGain in fresh cadavers compared to that of the Intersurgical i-gel and LMA Supreme New Cuff. Methods: The 3 devices were inserted in random order in 7 fresh cadavers without difficult airway criteria. The assessed items were: Insertion time, number of attempts and ease of insertion, airway seal pressure, ease of gastric tube insertion, endoscopic view of vocal cords, efficacy of guided tracheal intubation through the AuraGain and i-gel, and anatomic fit by lateral X-ray and neck dissections. Results: All devices were successfully inserted within 3 attempts, except for one case of the LMA Supreme. Adjusting manoeuvres were often required to accomplish correct insertion. A 16 G gastric tube was easily advanced through all AuraGain and LMA Supreme devices. Fiberoptic tracheal intubation was effectively achieved through all AuraGain and i-gel devices in less than 60 s. Lateral X-ray and neck dissections confirmed optimal alignment of all devices with the respiratory and digestive tracts. Conclusions: Insertion of the new AmbuAuraGain required adjusting manoeuvres in some cases, as observed with the other two devices, and achieved similar airway seal pressures. Passage of a large bore gastric tube was as fast as with the LMA Supreme and ease of guided intubation was similar to that of the i-gel.

Pre-fabricated radial forearm phalloplasty with cadaveric bone graft

Phalloplasty is a complex set of procedures used in efforts to improve the anatomical,physiological,and aesthetic deficiencies caused by loss or absence of the penis.Methods have evolved significantly,and the use of free tissue transfer has become common amongst reconstructive surgeons.The inclusion of bone autograft,usually radius or fibula,within the neophallus has caused significant morbidity,and efforts continue to find the optimal solution.We present a novel approach using a pre-fabricated,radial forearm fasciocutaneous free flap containing cadaveric bone graft for phalloplasty following traumatic penis amputation.

The Evaluation of Visual Cadavers in Medical Laboratory: from Teaching to Practical Applications

Visual Cadavers is anemerging study method which promotes medical education and practical applications.It is benefited from other techniques and evaluated as having huge advantages,which is not only accelerating teaching and learning,but also improving scientific study,nevertheless,with limited cons.

Improving the Evaluation and Management of Cystotomy in Gynecologic Surgery with a Cadaver Surgical Curriculum

Objectives: Urinary tract injuries are a known complication of gynecologic surgery, occurring in 0.18% - 0.80% of procedures and most commonly involving the bladder. Appropriate identification, evaluation, treatment, and follow-up by gynecologic surgeons are important to reduce the associated long-term morbidities. The purpose of this study was to implement a comprehensive cadaver curriculum in cystotomy repair for OBGYN residents. Methods: This was a prospective observational cohort study including 10 OBGYN residents (PGY1-3) at a single institution in 2020 (56% of the 18 eligible residents). The curriculum consisted of a one-hour didactic lecture and one-hour hands-on surgical skills training with fresh frozen cadavers. Residents were evaluated in three domains: 1) knowledge, 2) surgical skills, and 3) confidence. Knowledge, confidence, and resident satisfaction were evaluated with pre- and post-surveys. The bladder model, derived from the ACOG Simulation Working Group, was used to evaluate surgical skills at baseline and at completion of the curriculum. Results: Across all three PGY levels, statistically significant improvements were observed in knowledge, surgical skills, and confidence after didactic and cadaver education (p = 0.001, p < 0.02, and p = 0.009 respectively). The largest increases in confidence occurred in residents’ ability to describe and perform cystotomy repairs. Conclusions: Educating and training OBGYN residents to manage and repair cystotomies can be challenging given the low incidence of injury in the operating room. The cadaver surgical skills curriculum was an effective training module and remains an important component of skills training in conjunction with simulation and traditional didactic sessions.

Inferring the Postmortem Interval of Rat Cadaver after Boiling Water Treatment Based on Microbial Community Succession

Background:In forensic investigations,accurate estimation of the postmortem interval(PMI)is an important task,but also an ongoing challenge.Especially in cases where the cadaver has been specially treated,for example,by boiling,the determination of PMI becomes extremely difficult.Previous studies have shown that the succession of the microbial community after decomposition of the cadaver can be used to infer PMI.However,the feasibility of determining the PMI of boiled cadavers has not yet been demonstrated.Aims and Objectives:The main objective of this study was to test whether we can infer PMI of boiled cadavers based on the succession of microbial communities.Materials and Methods:SD rats were killed by cervical dislocation.Subsequently,the rat cadavers were divided into the case(boiled cadavers)and control(unboiled cadavers)groups.Rectal samples were collected from the rats for 45 days and at nine time points.High-throughput sequencing of the 16S rRNA gene was performed to characterize the microbial community in the rectum.Results:The results showed that the composition and relative abundance of bacterial communities at the phylum level were significantly different between the case and control groups.The alpha diversity of the microbial community showed a decreasing trend with the decomposition process.Principal coordinate analysis showed that the case and control groups had obvious patterns along the succession of microbial communities.The rectal microbial communities showed a significant linear trend in the time course of decomposition.A random forest model was used to infer PMI.The goodness-of-fit(R2)of the model was 68.00%and 84.00%,and the mean absolute errors were 2.05 and 1.48 days within 45 days of decomposition for the case and control groups,respectively.Conclusions:Our results suggest that microbial community succession could be a potential method to infer PMI of boiled cadavers.

华南地区国人成人腹腔干分型变异的临床应用研究

目的研究成人腹腔干的分型及其解剖变异特点,为临床手术提供参考依据。方法对44具经防腐处理的尸体进行了腹腔干解剖。观察腹腔干各分支的走形,根据Panagouli分型法以及其起源椎体水平对其进行进一步量化和描述。结果成人腹腔干标本存在5种分型:83%(36例)拥有典型的腹腔干解剖结构(分型Ⅰ),18%(8例)有解剖变异,其中11%(5例)为分型Ⅲ,2%(1例)为分型Ⅳ,2%(1例)为分型Ⅴ,2%(1例)为分型Ⅸ。结论成人腹腔干变异较多,术前需结合影像学做好充分评估,避免损伤。

尸体肝移植受体两种伦理审查形式之伦理问题探讨

结合尸体肝移植受体会议审查和通讯审查两种审查形式的基本流程,通过对在两种审查形式实践过程中发现的案例进行陈述、分析,发现两种形式分别存在知情同意的“缺位”、公正性的“离场”两个主要伦理问题,并尝试提出可行性建议,包括知情同意相关情况需重点汇报、邀请伦理专家直接参与知情同意过程、通讯审查变快为“慢”,以期进一步推动完善尸体肝移植伦理审查相关工作,使其能够更好地实现保障受体权益的目标。

An anatomical comparison of two minimally invasive pelvic reconstructive surgeries using fresh female cadavers

Background During the past decade, graft materials have been widespread used in the vagina in order to correct pelvic organ prolapse. The aim of this study was to describe and compare the exact anatomical position of the puncture devices and their relations to the relevant anatomical structures in the ProliftTM and a modified pelvic reconstructive surgery with mesh. Methods Twelve fresh cadavers were allocated randomly to either the ProliftTM or the modified pelvic reconstructive surgery group. Each group had six fresh cadavers. Relevant distances between the puncture devices and anatomical structures were recorded in both minimally invasive puncture surgeries. Results The mean distances from the posterior puncture points of the obturator membrane to the posterior branch of obturator arteries were shorter （（0.60＋0.36） cm and （0.78＋0.10） cm） when compared with the distances to the anterior branch of obturator arteries （（1.53＋0.46） cm and （1.86＋0.51） cm） for the reconstruction of the anterior compartment in both surgeries （all P 〈0.05）. The distance from the puncture points of the pelvic floor through the ischiorectal fossa to the coccygeal and inferior gluteal arteries in the ProliftTM technique （（0.88＋0.10） cm） and （（1.59＋0.36） cm））were much shorter than that in the modified pelvic reconstructive surgery （（2.95＋0.09） cm） and （（3.40＋0,36） cm）） for the reconstruction of the middle and posterior compartments （all P 〈0.05）. Conclusions Compared with the ProliftTM technique, the modified pelvic reconstructive surgery with mesh would be safer not to cause great damage to the inferior gluteal arteries and the coccygeal arteries, The posterior branch of obturator arteries would be easier to be injured than the anterior branch of obturator arteries during anterior compartment reconstruction in both surgeries.