Significant temperature difference(300-77 K or even 4 K) can cause large deformations and displacements of the beam position monitors(BPMs),which affect BPMs measurement resolution or even cause their malfunction in c...Significant temperature difference(300-77 K or even 4 K) can cause large deformations and displacements of the beam position monitors(BPMs),which affect BPMs measurement resolution or even cause their malfunction in cryogenic situations.In this paper,to check the offset from the mechanical to electrical center in low temperature(77 K),Fourier's law and finite element method are used to simulate cryo-deformation.Laser tracker and micro-alignment telescope are employed in combined BPM calibration,installation and monitoring.The calibration error is<0.02 mm,and the installation and monitoring precision are 0.06 mm and 0.01 mm,respectively.The monitored cryo-deformation agrees well with the simulation results.These indicate that the combined alignment can improve performance of the BPM system.All these guaranteed the success of running the 9.55 MeV@2.14 mA cw protons.展开更多
China Initiative Accelerator Driven System (CIADS) proposed by the Chinese Academy of Sciences which is one of the twelve Major National Scientific and Technological Infrastructures has been approved by National Devel...China Initiative Accelerator Driven System (CIADS) proposed by the Chinese Academy of Sciences which is one of the twelve Major National Scientific and Technological Infrastructures has been approved by National Development and Reform Commission of China, and supposed to be the first principle prototype ADS experimental facility in the world.展开更多
The demo facility of china ADS injector II was installed in the tunnel in 2014. The on-site layout of demo facility is shown in the Fig. 1. The demo faclity mainly includes ECRIS, LEBT, RFQ acclerator, MEBT and TCM6. ...The demo facility of china ADS injector II was installed in the tunnel in 2014. The on-site layout of demo facility is shown in the Fig. 1. The demo faclity mainly includes ECRIS, LEBT, RFQ acclerator, MEBT and TCM6. The TCM6 is composed by six SC HWR cavity,six SC soleniods and five BPMs. The TCM6 will be the prototype for the future 2025 MeV CADS superconducting linac. The beam commissioning of CADS Injector II started in June 2015. It mainly consists of three steps.展开更多
By combining interactive graphic CAD and optimizing methods we have developed an automated optimum CAD system for railway location AORLCAD. Using the AORLCAD, the optimization of both horizontal and vertical alignm...By combining interactive graphic CAD and optimizing methods we have developed an automated optimum CAD system for railway location AORLCAD. Using the AORLCAD, the optimization of both horizontal and vertical alignment of railway can be realized by using automated optimization interactive graphic design alternatively. The result makes automated optimum technique for railway location more completed. The methods of interactive graphic design and optimum techniques used by AORLCAD are introduced in detail.展开更多
目的为评价CEREC椅旁CAD/CAM系统制作的IPS e.max CAD玻璃陶瓷高嵌体应用于根管治疗后牙缺损病例的临床效果。方法选择42例根管治疗后牙,应用高嵌体的牙体预备方式,采用CEREC椅旁CAD/CAM修复系统和IPS e.max CAD玻璃陶瓷,即刻完成修复...目的为评价CEREC椅旁CAD/CAM系统制作的IPS e.max CAD玻璃陶瓷高嵌体应用于根管治疗后牙缺损病例的临床效果。方法选择42例根管治疗后牙,应用高嵌体的牙体预备方式,采用CEREC椅旁CAD/CAM修复系统和IPS e.max CAD玻璃陶瓷,即刻完成修复体并粘接;修复1年后复查,参照改良修正后的美国公众健康服务标准(US Public Health Service Criteria,USPHS),在修复体边缘染色、边缘继发龋、修复体边缘适合性、修复体崩瓷折裂或脱落、修复体颜色、牙龈健康状况、修复体邻接关系、患者满意度8个方面进行评价。结果修复体边缘染色C级病例1例,成功率97.6%;边缘继发龋C级病例1例,成功率97.6%;修复体邻接关系欠佳C级病例1例,成功率97.6%;在边缘适合性、修复体崩瓷折裂或脱落、修复体颜色、牙龈健康状况、患者满意方面表现优秀,成功率均为100%。结论椅旁CAD/CAM系统制作的IPS e.maxCAD高嵌体修复体在短期内可取得良好的修复效果。展开更多
基金supported by the National Natural Science Foundation of China(No.11605262)
文摘Significant temperature difference(300-77 K or even 4 K) can cause large deformations and displacements of the beam position monitors(BPMs),which affect BPMs measurement resolution or even cause their malfunction in cryogenic situations.In this paper,to check the offset from the mechanical to electrical center in low temperature(77 K),Fourier's law and finite element method are used to simulate cryo-deformation.Laser tracker and micro-alignment telescope are employed in combined BPM calibration,installation and monitoring.The calibration error is<0.02 mm,and the installation and monitoring precision are 0.06 mm and 0.01 mm,respectively.The monitored cryo-deformation agrees well with the simulation results.These indicate that the combined alignment can improve performance of the BPM system.All these guaranteed the success of running the 9.55 MeV@2.14 mA cw protons.
文摘China Initiative Accelerator Driven System (CIADS) proposed by the Chinese Academy of Sciences which is one of the twelve Major National Scientific and Technological Infrastructures has been approved by National Development and Reform Commission of China, and supposed to be the first principle prototype ADS experimental facility in the world.
文摘The demo facility of china ADS injector II was installed in the tunnel in 2014. The on-site layout of demo facility is shown in the Fig. 1. The demo faclity mainly includes ECRIS, LEBT, RFQ acclerator, MEBT and TCM6. The TCM6 is composed by six SC HWR cavity,six SC soleniods and five BPMs. The TCM6 will be the prototype for the future 2025 MeV CADS superconducting linac. The beam commissioning of CADS Injector II started in June 2015. It mainly consists of three steps.
文摘By combining interactive graphic CAD and optimizing methods we have developed an automated optimum CAD system for railway location AORLCAD. Using the AORLCAD, the optimization of both horizontal and vertical alignment of railway can be realized by using automated optimization interactive graphic design alternatively. The result makes automated optimum technique for railway location more completed. The methods of interactive graphic design and optimum techniques used by AORLCAD are introduced in detail.
文摘目的为评价CEREC椅旁CAD/CAM系统制作的IPS e.max CAD玻璃陶瓷高嵌体应用于根管治疗后牙缺损病例的临床效果。方法选择42例根管治疗后牙,应用高嵌体的牙体预备方式,采用CEREC椅旁CAD/CAM修复系统和IPS e.max CAD玻璃陶瓷,即刻完成修复体并粘接;修复1年后复查,参照改良修正后的美国公众健康服务标准(US Public Health Service Criteria,USPHS),在修复体边缘染色、边缘继发龋、修复体边缘适合性、修复体崩瓷折裂或脱落、修复体颜色、牙龈健康状况、修复体邻接关系、患者满意度8个方面进行评价。结果修复体边缘染色C级病例1例,成功率97.6%;边缘继发龋C级病例1例,成功率97.6%;修复体邻接关系欠佳C级病例1例,成功率97.6%;在边缘适合性、修复体崩瓷折裂或脱落、修复体颜色、牙龈健康状况、患者满意方面表现优秀,成功率均为100%。结论椅旁CAD/CAM系统制作的IPS e.maxCAD高嵌体修复体在短期内可取得良好的修复效果。
